New Well-Defined Polymeric Betaines: First Report Detailing the Synthesis and ROMP of Salt-Responsive Sulfopropylbetaine- and Carboxyethylbetaine-exo-7-oxanorbornene Monomers

Poly(Oxanorbornene)-Protein Conjugates Prepared by Grafting-to ROMP as Alternatives for PEG

PEGylation is the gold standard in protein-polymer conjugation, improving circulation half-life of biologics while mitigating the immune response to a foreign substance. However, preexisting anti-PEG antibodies in healthy humans are becoming increasingly prevalent and elicitation of anti-PEG antibodies when patients are administered with PEGylated therapeutics challenges their safety profile. In the current study, two distinct amine-reactive poly(oxanorbornene) (PONB) imide-based water-soluble block co-polymers are synthesized using ring-opening metathesis polymerization (ROMP). The synthesized block-copolymers include PEG-based PONB-PEG and sulfobetaine-based PONB-Zwit. The polymers are then covalently conjugated to amine residues of lysozyme (Lyz) and urate oxidase (UO) using a grafting-to bioconjugation technique. Both Lyz-PONB and UO-PONB conjugates retained significant bioactivities after bioconjugation. Immune recognition studies of UO-PONB conjugates indicated a comparable lowering of protein immunogenicity when compared to PEGylated UO. PEG-specific immune recognition is negligible for UO-PONB-Zwit conjugates, as expected. These polymers provide a new alternative for PEG-based systems that retain high levels of activity for the biologic while showing improved immune recognition profiles.

One-pot synthesis of linear triblock terpolymers and their aqueous self-assembly

Compartmentalized micelles are prepared through the self-assembly of linear triblock terpolymers containing hydrophilic (H), lipophilic (L), and fluorophilic (F) domains.

Syntheses of polynorbornadienes by ring-opening metathesis polymerizations of symmetric and non-symmetric 2,3-bis(alkoxycarbonyl)norbornadienes and their conversion to half-ester derivatives

Libraries of polynorbornadienes were synthesized with good yields with a ruthenium-containing 2nd generation Grubbs catalyst by ring-opening metathesis polymerization (ROMP) of a variety of symmetric and non-symmetric 2,3-bis(alkoxycarbonyl)norbornadiene monomer units prepared from the half-esters obtained efficiently by the selective monohydrolysis reactions of symmetric diesters we reported earlier. Among these polymers, the polynorbornadienes with t-butoxycarbonyl groups derived from non-symmetric monomer units were converted to the half-ester derivatives by deprotection with trifluoroacetic acid, yielding amphiphilic polymers. The hydrogenation reactions of the obtained polymers were carried out to yield polymers having saturated structures in the main chains for improvement of the thermal stabilities. All these polymers were characterized by their molecular weights and thermal properties along with the spectroscopic data. Our selective monohydrolysis reactions have been proven to be a versatile tool for production of relatively homogeneous polymer libraries.

Cell Engineering with Functional Poly(oxanorbornene) Block Copolymers

Cell-based therapies are gaining prominence in treating a wide variety of diseases and using synthetic polymers to manipulate these cells provides an opportunity to impart function that could not be achieved using solely genetic means. Herein, we describe the utility of functional block copolymers synthesized by ring-opening metathesis polymerization (ROMP) that can insert directly into the cell membrane via the incorporation of long alkyl chains into a short polymer block leading to non-covalent, hydrophobic interactions with the lipid bilayer. Furthermore, we demonstrate that these polymers can be imbued with advanced functionalities. A photosensitizer was incorporated into these polymers to enable spatially controlled cell death by the localized generation of 1 O2 at the cell surface in response to red-light irradiation. In a broader context, we believe our polymer insertion strategy could be used as a general methodology to impart functionality onto cell-surfaces.

Microwave-assisted synthesis of glycopolymers by ring-opening metathesis polymerization (ROMP) in an emulsion system

Well-defined glycopolymers fabricated by microwave-accelerated emulsion polymerization offer promising prospects for deciphering glycan-dependent interactions.

Synthesis and ROMP of new sulfobetaine and carboxybetaine norbornene

The synthesis of novel norbornene based polyzwitterions via ring opening metathesis polymerization (ROMP) is present. Trifluoracetic acid (TFA) was used as a solvent to provide a homogenous medium for the polymerization reaction of sulfobetaines with the commercially available Hoveyda-Grubbs’ initiator. In order to prevent the competitive complexation via carboxylate functional group of the ruthenium metal center, we carried out the controlled polymerization of ethyl protected carboxybetaines monomers.

Ethanolic RAFT Dispersion Polymerization of 2-(Naphthalen-2-yloxy)ethyl Methacrylate and 2-Phenoxyethyl Methacrylate with Poly[2-(dimethylamino)ethyl Methacrylate] Macro-Chain Transfer Agents

The ethanolic reversible addition-fragmentation chain transfer dispersion polymerization (RAFTDP), at 21 wt-%, of 2-(naphthalen-2-yloxy)ethyl methacrylate (NOEMA) and 2-phenoxyethyl methacrylate (POEMA) with a poly[2-(dimethylamino)ethyl methacrylate] macro-chain transfer agent (CTA) with an average degree of polymerization of 20 (PDMAEMA20) is described. DMAEMA20-b-NOEMAy (y = 20–125) block copolymers were readily prepared under dispersion conditions in ethanol at 70°C. However, the polymerization of NOEMA was not well controlled, with size exclusion chromatograms being distinctly bi or multimodal with measured dispersities . Though NOEMA copolymerization was not ideal, the resulting series of block copolymers did exhibit the anticipated full spectrum of nanoparticle morphologies (spheres, worms, and vesicles). Interestingly, these morphology transitions occurred over a relatively narrow range of block copolymer compositions. In the case of POEMA, copolymerization was also poorly controlled with 1.50 ≤ ĐM ≤ 1.83 for the series of DMAEMA20-b-POEMAy copolymers. In contrast to the NOEMA-based copolymers, the POEMA series only yielded nanoparticles with a spherical morphology whose size increased with increasing average degrees of polymerization of the POEMA block. Collectively, though both NOEMA and POEMA can be utilized in ethanolic RAFT dispersion polymerization formulations, these preliminary studies suggest that neither appears to be an ideal aryl methacrylate choice as comonomer, especially if the goal is to combine the synthesis of well-defined copolymers with efficient nanoparticle formation.

Dual-functional ROMP-based betaines: effect of hydrophilicity and backbone structure on nonfouling properties

Foundational materials for nonfouling coatings were designed and synthesized from a series of novel dual-functional zwitterionic polymers, Poly[NRZI], which were easily obtained via ring-opening metathesis polymerization (ROMP) followed by a single step transformation of the cationic precursor, Poly[NR(+)], to the zwitterion, Poly[NRZI]. The resulting unique dual-functional structure contained the anion and the cation within the same repeat unit but on separate side chains, enabling the hydrophilicity of the system to be tuned at the repeat unit level. These dual-functional zwitterionic polymers were specifically designed to investigate the impact of structural changes, including the backbone, hydrophilicity, and charge, on the overall nonfouling properties. To evaluate the importance of backbone structure, and as a direct comparison to previously studied methacrylate-based betaines, norbornene-based carbo- and sulfobetaines (Poly[NCarboZI] and Poly[NSulfoZI]) as well as a methacrylate-based sulfobetaine (Poly[MASulfoZI]) were synthesized. These structures contain the anion-cation pairs on the same side chain. Nonfouling coatings were prepared from copolymers, composed of the zwitterionic/cationic precursor monomer and an ethoxysilane-containing monomer. The coatings were evaluated by using protein adsorption studies, which clearly indicated that the overall hydrophilicity has a major influence on the nonfouling character of the materials. The most hydrophilic coating, from the oligoethylene glycol (OEG)-containing dual-functional betaine, Poly[NOEGZI-co-NSi], showed the best resistance to nonspecific protein adsorption (Γ(FIB) = 0.039 ng/mm(2)). Both norbornene-based polymers systems, Poly[NSulfoZI] and Poly[NCarboZI], were more hydrophilic and thus more resistant to protein adsorption than the methacrylate-based Poly[MASulfoZI]. Comparing the protein resistance of the dual-functional zwitterionic coatings, Poly[NRZI-co-NSi], to that of their cationic counterparts, Poly[NR(+)-co-NSi], revealed the importance of screening electrostatic interactions. The adsorption of negatively charged proteins on zwitterionic coatings was significantly less, despite the fact that both coatings had similar wetting properties. These results demonstrate that the unique, tunable dual-functional zwitterionic polymers reported here can be used to make coatings that are highly efficient at resisting protein adsorption.

Environmentally friendly antibacterial cotton textiles finished with siloxane sulfopropylbetaine

This paper reports a novel environmentally friendly antibacterial cotton textile finished with reactive siloxane sulfopropylbetaine(SSPB). The results show that SSPB can be covalently bound onto the cotton textile surface, imparting perdurable antibacterial activity. The textiles finished with SSPB have been investigated systematically from the mechanical properties, thermal stability, hydrophilic properties and antibacterial properties. It is found that the hydrophilicity and breaking strength are improved greatly after the cotton textiles are finished with SSPB. Additionally, the cotton textiles finished with SSPB exhibit good antibacterial activities against gram-positive bacteria Staphylococcus aureus (S.aureus, ATCC 6538), gram-negative bacteria Escherichia coli (E.coli, 8099) and fungi Candida albicans (C.albicans, ATCC 10231). Moreover, SSPB is nonleachable from the textiles, and it does not induce skin stimulation and is nontoxic to animals. Thus, SSPB is ideal candidate for environmentally friendly antibacterial textile applications.

Study of zwitterionic sulfopropylbetaine containing reactive siloxanes for application in antibacterial materials

Antibacterial agents receive a great deal of attention around the world due to the interesting academic problems of how to combat bacteria and of the beneficial health, social and economic effects of successful agents. Scientists are actively developing new antibacterial agents for biomaterial applications. This paper reports the novel antibacterial agent siloxane sulfopropylbetaine (SSPB), which contains reactive alkoxysilane groups. The structure and properties of SSPB were systematically investigated, with the results showing that SSPB contains both quaternary ammonium compounds and reactive siloxane groups. SSPB has good antibacterial activity against both Escherichia coli (E. coli, 8099) and Staphylococcus aureus (S. aureus, ATCC 6538). The minimal inhibition concentration is 70 μmol/ml SSPB against both E. coli and S. aureus. In addition, the SSPB antibacterial agent can be used in both weak acid and weak alkaline environments, functioning within the wide pH range of 4.0-9.0. The SSPB-modified glass surface killed 99.96% of both S. aureus and E. coli organisms within 24 h. No significant decrease was observed in this antibacterial activity after 20 washes. Moreover, SSPB does not induce a skin reaction and is nontoxic to animals. Thus, SSPB is an ideal candidate for future applications as a safe, environmentally friendly antibacterial agent.

The Power of RAFT for Creating Polymers Having Imbedded Side-Chain Functionalities: Norbornenyl-Functionalized Polymers and their Transformations via ROMP and Thiol-ene Reactions

Robust, efficient and orthogonal chemistries are becoming increasingly important tools for the construction of increasingly sophisticated materials. In this article, the selectivity of reversible addition–fragmentation chain transfer (RAFT)-based radical polymerization of bifunctional monomers is exploited for the preparation of statistical and block copolymers that contain imbedded side-chain functionalities, which are then shown to exhibit two different orthogonal types of chemical reactivity to afford discrete nanoscale objects and functional derivative structures. Based on the radical reactivity ratios calculated from Alfrey–Price theory, a bifunctional monomer 4-(5′-norbornene-2′-methoxy)-2,3,5,6-tetrafluorostyrene (1) was designed and synthesized, for its highly reactive tetrafluorostyrenyl group relative to its norbornene (Nb) group. Selective RAFT copolymerization of 1 with styrene (St) afforded copolymers with over 50 mol-% structural units having a pendent norbornenyl functionality while maintaining narrow molecular weight distribution (polydispersity index (PDI) = 1.23). Diblock copolymers (PDI = 1.09–1.23) with Nb side-chain substituents regioselectively placed along one segment of the block copolymer structure were also prepared by RAFT copolymerizations of 1 with St or 2,3,4,5,6-pentafluorostyrene, using either polystyrene or poly(styrene-alt-maleic anhydride)-based macro chain-transfer agents. A well-defined star block copolymer (PDI = 1.23) having a poly(norbornene)-based core and polystyrene arms was obtained by ring-opening metathesis polymerization using the regioselective diblock copolymer PSt-b-P(1-co-St) as the multifunctional macromonomer and Grubbs’ catalyst (first generation) as the initiator. Photo-induced thiol-ene reactions of Nb-functionalized polymers with thiols were fast and efficient, yielding polymers with new side-chain structures.