Adsorption of Block Copolymers from Selective Solvents on Curved Surfaces

Conetworks on the base of polystyrene with poly(methyl methacrylate) paired polymers

It is found that forced (reactive) blending of polystyrene (PS) with polymethylmethacrylate (PMMA) involves the covalent binding of heterogeneous macromolecules to afford the paired polymers. For this purpose, the “anchor” N-H unsubstituted tetrazole or oxirane functional groups are preliminarily introduced in the structure of both polymers in a small amount that leads to a covalent binding of the heterogeneous macromolecules. The reaction between the modified PS and PMMA is carried out in dimethylformamide (DMF), toluene and dichloroethane (DCE) at a high total concentration of polymers (10-20 g dL-1). The process is accompanied by gel-formation to deliver cross-linked paired polymers It is established that the highest rate of the paired polymer is attained in the DCE medium, while the lowest rate is observed in DMF. For paired polymers synthesized in DMF, two glass transition temperatures (Tg) of 92°C and 104°C correspond to the original PS and PMMA, respectively. The products of forced blending of PS and PMMA in toluene have one averaged Tg value (99°C), whereas those obtained in DCE show no pronounced glass transition region at 90 ÷ 115°C. In toluene or DCE, the paired polymers are formed, which represent single-phase systems having one glass transition region.

Monolayer Arrays of Nanoparticles on Block Copolymer Brush Films

Two-dimensional arrays of nanoparticles (NPs) have widespread applications in optical coatings, plasmonic sensors, and nanocomposites. Current bottom-up approaches that use homogeneous NP templates, such as silane self-assembled monolayers or homopolymers, are typically plagued by NP aggregation, whereas patterned block copolymer (BCP) films require specific compositions for specific NP distributions. Here, we show, using polystyrene- b-poly(4-vinylpyridine) (PS- b-P4VP) and gold NPs (AuNPs) of various sizes, that a nanothin PS- b-P4VP brushlike coating (comprised of a P4VP wetting layer and a PS overlayer), which is adsorbed onto flat substrates during their immersion in very dilute PS- b-P4VP tetrahydrofuran solutions, provides an excellent template for obtaining dense and well-dispersed AuNPs with little aggregation. These non-close-packed arrays have similar characteristics regardless of immersion time in solution (about 10-120 s studied), solution concentration below a critical value (0.1 and 0.05 mg/mL studied), and AuNP diameter (10-90 nm studied). Very dilute BCP solutions are necessary to avoid deposition, during substrate withdrawal, of additional material onto the adsorbed BCP layer, which typically leads to patterned surfaces. The PS brush coverage depends on immersion time (adsorption kinetics), but full coverage does not inhibit AuNP adsorption, which is attributed to PS molecular rearrangement during exposure to the aqueous AuNP colloidal solution. The simplicity, versatility and robustness of the method will enable applications in materials science requiring dense, unaggregated NP arrays.

Surface Engineering of Cellulose Nanofiber by Adsorption of Diblock Copolymer Dispersant for Green Nanocomposite Materials

An effective approach for the dispersion of hydrophilic cellulose nanofiber (CNF) in hydrophobic high-density polyethylene (HDPE) is presented using adsorption of a diblock copolymer dispersant. The dispersant consists of both resin compatible poly(lauryl methacrylate) (PLMA) and cellulose interactive poly(2-hydroxyethyl methacrylate) blocks. The PLMA-adsorbed CNFs are characterized by FT-IR and contact angle measurement, revealing successful hydrophobization. X-ray CT imaging shows there are apparently less CNF aggregates in the nanocomposites if adding amount of the dispersant was enough. The good dispersion results in a high mechanical reinforcement, corresponding to 140% higher Young's modulus and 84% higher tensile strength than the neat HDPE. This approach is broadly applicable and allows for easy manufacturing process for strong and lightweight CNF-reinforced nanocomposite materials.

Block-copolymer-mediated nanoparticle dispersion and assembly in polymer nanocomposites

A individual nanoparticle (NP) dispersion in polymer nanocomposites has been obtained through the adsorption of PSbP2VP block copolymer (BCP) at the NPs' surface in solution. The adsorbed block increases the minimum inter-NP distance, while the non-adsorbed block has favourable entropy of mixing with the matrix polymer with the same chemical structure. Physical adsorption of BCP provides a simple, robust means of organizing NPs in a chemically unfavourable polymer.

Reactive adsorption of PS-PMMA block copolymers on concave alumina surfaces

The influence of pore size, relative block size, and solvent quality on the extent of diblock copolymer adsorption on alumina surfaces was determined. To this end, the block copolymer that was chosen was poly(styrene)-b-poly(methyl methacrylate) (PS-b-PMMA), in which the PMMA block strongly chemisorbs to the surface and the PS block weakly physisorbs. Several architectures (i.e., different ratios of M(n(PMMA)) and M(n)((PS))) of the PS-b-PMMA copolymers were adsorbed from various solvents onto porous alumina membranes with various pore sizes. It was determined that the diblock copolymer coverage decreased significantly as the pore size decreased, similar to the behavior of the PMMA homopolymer under the same conditions. However, the coverage decreased as the molecular weight of the anchoring block (PMMA) increased for all pore sizes, which is in contrast to the behavior of the PMMA homopolymer under the same conditions. The dependence of the coverage on the relative block size and solvent quality is analyzed on the basis of the anchor-buoy model and the deviation from it in a nonideal system. The results presented in this work are relevant to the study of block copolymer conformation in solutions and on surfaces, adsorption chromatography, and solvent sensors and controls.

Adsorption of poly(methyl methacrylate) on concave Al2O3 surfaces in nanoporous membranes

The objective of this study was to determine the influence of polymer molecular weight and surface curvature on the adsorption of polymers onto concave surfaces. Poly(methyl methacrylate) (PMMA) of various molecular weights was adsorbed onto porous aluminum oxide membranes having various pore sizes, ranging from 32 to 220 nm. The surface coverage, expressed as repeat units per unit surface area, was observed to vary linearly with molecular weight for molecular weights below approximately 120,000 g/mol. The coverage was independent of molecular weight above this critical molar mass, as was previously reported for the adsorption of PMMA on convex surfaces. Furthermore, the coverage varied linearly with pore size. A theoretical model was developed to describe curvature-dependent adsorption by considering the density gradient that exists between the surface and the edge of the adsorption layer. According to this model, the density gradient of the adsorbed polymer segments scales inversely with particle size, while the total coverage scales linearly with particle size, in good agreement with experiment. These results show that the details of the adsorption of polymers onto concave surfaces with cylindrical geometries can be used to calculate molecular weight (below a critical molecular weight) if pore size is known. Conversely, pore size can also be determined with similar adsorption experiments. Most significantly, for polymers above a critical molecular weight, the precise molecular weight need not be known in order to determine pore size. Moreover, the adsorption developed and validated in this work can be used to predict coverage also onto surfaces with different geometries.