A New General Methodology for the Syntheses of End-Functional Polyisobutylenes by Nucleophilic Substitution Reactions

Synthesis of linear and star-shaped telechelic polyisobutylene by cationic polymerization

Hydroxyl-terminated linear and star-shaped telechelic polyisobutylene have been successfully synthesized by living cationic polymerization using propylene oxide (PO)/Titanium tetrachloride (TiCl₄) as the initiator system. A one-step method to prepare the terminal hydroxyl group was realized by selecting the cheap and beautiful epoxide as the functional initiator, which has the prospect of industrial application. The polymerization mechanism was proposed by the end structure analysis and Gaussian calculation results. At the same time, the living linear macromolecular chain was used as the starting point to react with divinyl compounds for synthesis of star-shaped hydroxyl-terminated polyisobutylene. The effects of initiator-crosslinking agent ratio, arm length, and reaction time on the coupling reaction were studied.

Hydroxyl-terminated linear and star-shaped telechelic polyisobutylene have been successfully synthesized by living cationic polymerization using propylene oxide (PO)/Titanium tetrachloride (TiCl₄) as the initiator system.

Quasiliving carbocationic polymerization of isobutylene using FeCl3 as an efficient and water-tolerant Lewis acid: synthesis of well-defined telechelic polyisobutylenes

A cost-efficient approach for the preparation of well-defined low molecular weight difunctional polyisobutulenes possessing an exo-olefin or hydroxyl group was developed in this study.

Synthesis and characterization of hydroxyl-terminated butadiene-end-capped polyisobutylene and its use as a diol for polyurethane preparation

Hydroxyl-terminated telechelic polyisobutylene (PIB) was prepared through living cationic polymerization. A living PIB chain was formed using the t-Bu-m-DiCuOMe/TiCl₄ initiating system and then capped with 1,3-butadiene (BD) to prepare chlorine-terminated telechelic PIB. The chlorine-terminated telechelic PIB was then hydrolysed with tetrabutylammonium hydroxide to form hydroxyl-terminated PIB. Nuclear magnetic resonance spectroscopy confirmed hydrolysis completion. The hydroxyl-terminated PIB was subsequently used as a diol to react with 4,4-methylenebis(phenylisocyanate) (MDI) and produce a PIB-based polyurethane, which showed stronger acid resistance, hydrolysis stability and thermal oxidation stability than a commercial polyurethane.

Cationic polymerization of isobutylene in toluene: toward well-defined exo-olefin terminated medium molecular weight polyisobutylenes under mild conditions

Medium molecular weight polyisobutylenes (∼35 000 g mol⁻¹) with exo-olefin end groups (>80%) can be obtained by cationic polymerization of isobutylene in toluene using ⁱBu₂AlCl or ⁱBuAlCl₂·nOR₂ (n = 0.6–0.8) as co-initiators.

End-quenching of tert-chloride-terminated polyisobutylene with alkoxybenzenes: comparison of AlCl3 and TiCl4 catalysts

Functional polyisobutylenes were prepared by quenching living carbocationic PIB with alkoxybenzenes such as (3-bromopropoxy)benzene using AlCl₃ or TiCl₄ as catalyst.

Polyacryloyl hydrazide: an efficient, simple, and cost effective precursor to a range of functional materials through hydrazide based click reactions

Preparation and studies of ion exchangeable epoxy resins, stimuli responsive hydrogels, and polymer-dye conjugates have been accomplished through hydrazide based click reactions using polyacryloyl hydrazide (PAH) as the precursor. A convenient synthesis of PAH with quantitative functionality was achieved by treatment of polymethyl acrylate with hydrazine hydrate in the presence of tetra-n-butyl ammonium bromide. PAH was cured with bisphenol A diglycidyl ether (BADGE) at 60 °C to form transparent resins with superior mechanical properties (tensile strength = 2-40 MPa, Young's modulus = 3.3-1043 MPa, and ultimate elongation = 9-75%) compared to the conventional resins prepared using triethylene tetramine. The resins exhibited higher ion exchange capacities (1.2-6.3 mmol/g) compared to the commercial AHA ammonium-type (Tokuyama Co., Japan) membranes. An azo dye with aldehyde functionality was covalently attached to PAH through hydrazone linkage, and the dye labeled PAH exhibited colorimetric sensing ability for base and acids up to micromolar concentration. The swelling of the PAH based hydrogel varied in the range 4-450% depending on the pH and temperature of the medium. The hydrogels gradually released 30% of the original encapsulated dye in a period of 200 h. PAH-hydroxy naphthaldehyde conjugate released 75% of the original loading in ∼11 days at 37 °C and pH 5.0 through cleavage of the -CONHN═C- linkage. The study depicts the versatility of PAH as a precursor and inspires synthesis of a range of new materials based on PAH in the future.