Ring-Opening Polymerization of Cyclic Monomers by Complexes Derived from Biocompatible Metals. Production of Poly(lactide), Poly(trimethylene carbonate), and Their Copolymers

Metal Complexes in the Synthesis of Biodegradable Polymers: Achievements and Prospects

This review describes recent advances in the synthesis of homopolymers of lactide and related cyclic esters via ring-opening polymerization (ROP) in the presence of metal complexes based on group 1, 2, 4, 12, 13 and 14 metals. Particular attention is paid to the influence of the initiator structure on the properties of the obtaining homo- and copolymers. Also, a separate chapter is devoted to the study of metal complexes in the synthesis of copolymers of lactide and lactones. This review highlights the efforts made over the last ten years or so, and shows how main-group metals have received increasing attention in the field of the polymerization of lactide and related cyclic esters.

Synthesis and Characterization of Functionalized Polylactides Containing Acetal Units

New functionalized lactide copolymers containing acetal units were prepared for the first time in a controlled manner that enabled the regulation of the number of reactive groups introduced into the polyester chain. The presence of functional groups in the copolymer backbone provided chemical modification sites, and the nature of the acetal unit affected the material degradability. First, paraformaldehyde was reacted with selected diols containing reactive pendant groups (3-allyloxypropane-1,2-diol and 3-chloropropane-1,2-diol), which was catalyzed by p-toluenesulfonic acid, to synthesize new cyclic acetals with different functionalities (allyl- or chloro-). In addition, using butane-1,4-diol, a nonfunctionalized seven-membered cyclic acetal (dioxepane) was obtained for comparative studies. In the next step, the prepared cyclic acetals were used for cationic copolymerization with lactide in the presence of glycol as an initiator and triflic acid as a catalyst. Different temperatures (-15, 2, and 30 °C) and copolymerization times (24, 48, 72, and 192 h) were investigated to produce copolyesters with variable contents of acetal units in the range of 5-27%. The copolymers' structure and molar masses were carefully investigated using 1H, 13C NMR, 2D NMR, and size-exclusion chromatography. Moreover, the ability of functionalized copolymers to perform post modifications was also proven by the reaction with sodium azide and propanethiol. Finally, we speculate that structurally diverse groups can be attached to the copolyester chain, fine-tuning the on-demand properties, which could rapidly expand the library of polylactide-based materials.

En Route to CO2-Based (a)Cyclic Carbonates and Polycarbonates from Alcohols Substrates by Direct and Indirect Approaches

This review is dedicated to the state-of-the art routes used for the synthesis of CO2-based (a)cyclic carbonates and polycarbonates from alcohol substrates, with an emphasis on their respective main advantages and limitations. The first section reviews the synthesis of organic carbonates such as dialkyl carbonates or cyclic carbonates from the carbonation of alcohols. Many different synthetic strategies have been reported (dehydrative condensation, the alkylation route, the “leaving group” strategy, the carbodiimide route, the protected alcohols route, etc.) with various substrates (mono-alcohols, diols, allyl alcohols, halohydrins, propargylic alcohols, etc.). The second section reviews the formation of polycarbonates via the direct copolymerization of CO2 with diols, as well as the ring-opening polymerization route. Finally, polycondensation processes involving CO2-based dimethyl and diphenyl carbonates with aliphatic and aromatic diols are described.

Stereoselective polymerization of rac-lactide catalyzed by zwitterionic calcium complexes

Two zwitterionic calcium complexes L¹CaN(SiMe₃)₂(THF) (1) and L²CaN(SiMe₃)₂ (2) via protolysis reaction were synthesized. At −75 °C, 1 gave a heterotactic sequence enriched polylactide, whilst 2 produced an isotactic sequence enriched polymer.

Conversion of dilute CO2 to cyclic carbonates at sub-atmospheric pressures by a simple indium catalyst

A simple indium halide with an ammonium salt catalyst can catalyze effectively the cycloaddition of epoxide and dilute CO₂. A detailed mechanistic investigation is conducted using kinetics, isotope labeling, and in situ NMR and IR experiments.

Synthesis of Biodegradable Polymers: A Review on the Use of Schiff-Base Metal Complexes as Catalysts for the Ring Opening Polymerization (ROP) of Cyclic Esters

This review describes the recent advances (from 2008 onwards) in the use of Schiff-base metal complexes as catalysts for the ring opening polymerization (ROP) of cyclic esters. The synthesis and structure of the metal complexes, as well as all aspects concerning the polymerization process and the characteristics of the polymers formed, will be discussed.

Alkaline Earth Metal-Mediated Highly Iso-selective Ring-Opening Polymerization of rac-Lactide

Alkaline earth (Ae) metal complexes of the aminophosphine borane ligand are highly active and iso-selective catalysts for the ring-opening polymerization (ROP) of rac-lactide (LA). The polymerization reactions are well controlled and produce polylactides with molecular weights that are precise and narrowly distributed. Kinetic studies reveal that the ROP of rac-LA catalyzed by all Ae metal complexes had a first-order dependency on LA concentration as well as catalyst concentration. A plausible reaction mechanism for Ae metal complex-mediated ROP of rac-LA is discussed, based on controlled kinetic experiments and molecular chain mobility.

Lithium, sodium, potassium and calcium amine-bis(phenolate) complexes in the ring-opening polymerization of rac-lactide

Compounds of Li, Na, K and Ca of a tetradentate amino-bis(phenolato) ligand were prepared. Bimetallic compounds formulated as M₂[L](THF)_n (where M = Na, n = 1 (1·THF) or Li, n = 1 (2·THF)) were synthesized via the reaction of H₂[L] (where [L] = 2-pyridylmethylamino-N,N-bis(2-methylene-4-methoxy-6-tert-butylphenolato) with sodium hydride or n-butyllithium, respectively, in THF. Monometallic complexes MH[L](THF)_n (where M = Na, n = 1 (3·THF), Li, n = 0 (4) and K, n = 0 (5)) were obtained by reaction of H₂[L] with MN(SiMe₃)₂ where M = Na, Li, or K. Calcium complex Ca[L](THF) (6·THF) was synthesized in two ways; reaction of Na₂[L] with calcium iodide in THF, and reaction of Ca[N(SiMe₃)₂]₂ with H₂[L] in toluene. Compounds 1-6 exhibit activity for rac-lactide polymerization under melt and solution conditions. Moderate control of polymer molecular weights was achieved in toluene, whereas polydisperse polymer was obtained under solvent free conditions. MALDI-TOF MS analysis of the polymer end groups revealed a predominantly cyclic nature for the polylactides.

Amido rare-earth(iii) and Ca(ii) complexes coordinated by tridentate amidinate ligands: synthesis, structure, and catalytic activity in the ring-opening polymerization of rac-lactide and ε-caprolactone

Y(iii), Sm(iii) and Ca(ii) monoamido complexes coordinated by tridentate amidinate ligand were synthesized and evaluated as initiators of ring-opening polymerization of rac-lactide and ε-caprolactone.

Hydroamination of isocyanates and isothiocyanates by alkaline earth metal initiators supported by a bulky iminopyrrolyl ligand

Synthesis of heteroleptic and homoleptic alkaline earth metal complexes supported by bulky bis-iminopyrrolyl ligands are reported. The catalytic hydroamination of isocyanates and isothiocyanates with aryl amines using calcium complex is presented.

Redox-switchable ring-opening polymerization by tridentate ONN-type titanium and zirconium catalysts

A study designed to ascertain the impact that ligand symmetry, number of redox-active moieties, and identity of the active metal center have on the catalytic ring-opening polymerization performance of redox-switchable catalysts.

Aluminum complexes with Schiff base bridged bis(indolyl) ligands: synthesis, structure, and catalytic activity for polymerization of rac-lactide

A series of Schiff base bridged bis(indolyl) ligands were developed for aluminum chemistry. The reactions of AlEt3 or AlMe3 with the Schiff base bridged bis(indolyl) proligands R1(-N[double bond, length as m-dash]CHC8H5NH)2 (R1 = -CH2CH2- (H2L1); -CH2CH2CH2- (H2L2); -CH2CMe2CH2- (H2L3); rac-Cy (H2L4); and R,R-Cy (H2L5)) were studied leading to the synthesis of a series of aluminum alkyl complexes L1AlEt (1)-L5AlEt (5) and L3AlMe (3b) in good yields, while the reaction of H2L3 with Al(OiPr)3 gave the aluminum alkoxide complex L3AlOiPr (3a). These aluminum complexes were characterized by spectroscopic methods and elemental analyses. The solid state structures of the aluminum complexes 1-5 and 3a were confirmed by the X-ray diffraction study. X-ray analyses revealed that the aluminum centre in these complexes is five-coordinated. The coordination geometry is between square pyramidal and trigonal bipyramidal. In the presence of 1 equiv. of isopropanol, the aluminum alkyl complexes exhibited notable activity towards the ring-opening polymerization of rac-lactide at 70 °C in toluene, with good control over molecular weights and dispersities. The substituents and the length of the bridging part between the two Schiff base nitrogen atoms have an influence on either the tacticity of isolated polymers or the rate of polymerization. The kinetics of complex L3AlOiPr (3a) in C6D6 was also investigated, and the experimental results revealed that the rate of polymerization was first-order with respect to rac-lactide.

Group 4 permethylindenyl complexes for the polymerisation of l-, d- and rac-lactide monomers

A series of well-defined group 4 permethylindenyl complexes have been prepared and fully characterised by NMR spectroscopy and X-ray crystallography. Me2SB(Cp,I*)ZrCl2 ({(η5-C9Me6)Me2Si(η5-C5H4)}ZrCl2; 1), Me2SB(CpMe,I*)ZrCl2 ({(η5-C9Me6)Me2Si(η5-C5H3Me)}ZrCl2; 2), Me2SB(Cp,I*)HfCl2 (3) and Z-Me2SB(Cp,I*)ZrCl(O-2,6-Me-C6H3) (4) were investigated as initiators for the ring-opening polymerisation (ROP) of l-, d- and rac-lactide monomers in the presence of benzyl alcohol. 1-4 displayed second order dependence on monomer concentration and produced isotactic and heterotactic (Pr = 0.81) polylactides for the polymerisation of l-, d- and rac-lactide respectively. The effects of temperature, catalyst concentration, co-initiator concentration, solvent and scale were studied. At 80 °C, with two equivalents of benzyl alcohol, 4 was the most active initiator for the ROP of l-, d- and rac-lactide (kobs = 6.39, 6.38 and 5.89 M-1 h-1 respectively). The polylactides were characterised by NMR spectroscopy, GPC and MALDI-TOF mass spectrometry.

Investigation of a zirconium compound for redox switchable ring opening polymerization

Redox switchable catalysis with a ferrocene Schiff base zirconium complex allowed the synthesis of diblock and triblock copolymers.

Highly active rare-earth metal catalysts for heteroselective ring-opening polymerization of racemic lactide

Rare-earth metal complexes usually exhibit high activities in the ring-opening polymerization (ROP) of lactide, yet only a few scandium complexes have shown satisfactory activity. Herein, we report the synthesis of a series of chiral anilido-oxazoline-supported scandium and yttrium complexes that exhibit high activity in the ROP of racemic lactide (rac-LA). Complexes La-f-Ln(CH2SiMe3)2THF (La-f = 2-(2,6-R2PhN)-phenyl-4-(S)-R'-oxazoline; for 1a-f: L = La-f, Ln = Sc; for 2a-d: L = La-d, Ln = Y) were synthesized via the convenient one-pot reaction of Ln(CH2SiMe3)3(THF)2 (Ln = Sc, Y) with the corresponding proligands. The crystal structures of 1a, 1d, 1e, and 1f were isostructural, adopting a distorted trigonal bipyramidal configuration. Sc complexes 1 showed outstanding activity in the ROP of rac-LA with heteroselectivity. TOFs of up to 720 h-1 and 2910 h-1 were obtained in THF at room temperature and toluene at 60 °C, respectively. To our knowledge, these are the highest activities reported for Sc systems. Y complexes 2 showed higher activity and heteroselectivity than the Sc complexes, with TOFs of up to 1176 h-1 in THF at room temperature. Compared with the ortho-substituent on the anilido moiety, the bulky substituent at the chiral center of the oxazoline ring had a greater effect on controlling the heteroselectivity.

Advances in the use of CO2 as a renewable feedstock for the synthesis of polymers

Carbon dioxide offers an accessible, cheap and renewable carbon feedstock for synthesis. Current interest in the area of carbon dioxide valorisation aims at new, emerging technologies that are able to provide new opportunities to turn a waste into value. Polymers are among the most widely produced chemicals in the world greatly affecting the quality of life. However, there are growing concerns about the lack of reuse of the majority of the consumer plastics and their after-life disposal resulting in an increasing demand for sustainable alternatives. New monomers and polymers that can address these issues are therefore warranted, and merging polymer synthesis with the recycling of carbon dioxide offers a tangible route to transition towards a circular economy. Here, an overview of the most relevant and recent approaches to CO2-based monomers and polymers are highlighted with particular emphasis on the transformation routes used and their involved manifolds.

Alkaline earth metal complexes stabilized by amidine and guanidine ligands: synthesis, structure and their catalytic activity towards polymerization of rac-lactide

A series of amidine ligands RAmDIPP (R is backbone substituent, R = 2-methylpyridine (HL1), N,N,2-trimethylaniline (HL2), N,N-dimethylpropan-1-amine (HL3); DIPP (2,6-diisopropylphenyl) is N substituent) and a (Z)-1,1-diethyl-2,3-bis(2-methoxyphenyl)guanidine ligand (HL4) have been synthesized. Reaction of HL1-HL4 with Ca[N(SiHMe2)2](THF) or Ca[N(SiMe3)2](THF)2, respectively, afforded complexes 1-8 (1: [L1AmDIPPCa(SiHMe2)2]2, 2: L1AmDIPPCaN(SiMe3)2·(THF)2, 3: L2AmDIPPCaN(SiHMe2)2·(THF)2, 4: L2AmDIPPCaN(SiMe3)2·(THF), 5: L3AmDIPPCaN(SiHMe2)2·(THF)2, 6: L3AmDIPPCaN(SiMe3)2·(THF)2, 7: [L4CaN(SiHMe2)2]2, 8: [L4CaN(SiMe3)2]2). All the complexes were well-defined by NMR spectrum analyses and the molecular structures of 3 and 5-8 were further determined by single crystal X-ray diffraction analyses. In combination with an excess of PhOH as the chain transfer agent, complexes 1-8 catalyzed immortal ring-opening polymerization of rac-lactide in a controlled manner and exhibited moderate catalytic activity at room temperature. The end-group fidelity of the resultant polymer was certified by NMR and MALDI-TOF mass spectra.

Effect of the Configuration of a Bulky Aluminum Initiator on the Structure of Copolymers of l,l-Lactide with Symmetric Comonomer Trimethylene Carbonate

The effect of configuration of an asymmetric bulky initiator 2,2′-[1,1′-binaphtyl-2,2′-diyl- bis-(nitrylomethilidyne)]diphenoxy aluminum isopropoxide (Ini) on structure of copolymer of asymmetric monomer l,l-lactide (Lac) with symmetric comonomer trimethylene carbonate (Tmc) was studied using polarimetry, dilatometry, Size Exclusion Chromatography (SEC), and Carbon Nuclear Magnetic Resonance (¹³C NMR). When the S-enantiomer of Ini was used the distribution in copolymer chains at the beginning of polymerization is statistical, with alternacy tendency, changing next through a gradient region to homoblocks of Tmc. However, when R-Ini was used, the product formed was a gradient oligoblock one, with Tmc blocks prevailing at the beginning, changing to Lac blocks dominating at the end part of chains. Initiation of copolymerization with the mixture of both initiator enantiomers (S:R = 6:94) gave a multiblock copolymer of similar features but shorter blocks. Analysis of copolymerization progress required complex analysis of dilatometric data, assuming different molar volume contraction coefficients for units located in different triads. Comonomer reactivity ratios of studied copolymerizations were determined.

Preparation of multiblock copolymers via step-wise addition of l-lactide and trimethylene carbonate

The synthesis of up to pentablock copolymers from various combinations of l-lactide and trimethylene carbonate was accomplished using a dinuclear zinc complex, and the physical, thermal, and mechanical properties of the resulting copolymers evaluated.

Poly(l-lactide) (PLA) is a bioderived and biodegradable polymer that has limited applications due to its hard and brittle nature. Incorporation of 1,3-trimethylene carbonate into PLA, in a block copolymer fashion, improves the mechanical properties, while retaining the biodegradability of the polymer, and broadens its range of applications. However, the preparation of 1,3-trimethylene carbonate (TMC)/l-lactide (LA) copolymers beyond diblock and triblock structures has not been reported, with explanations focusing mostly on thermodynamic reasons that impede the copolymerization of TMC after lactide. We discuss the preparation of multiblock copolymers via the ring opening polymerization (ROP) of LA and TMC, in a step-wise addition, by a ferrocene-chelating heteroscorpionate zinc complex, {[fc(PPh₂)(BH[(3,5-Me)₂pz]₂)]Zn(μ-OCH₂Ph)}₂ ([(fc^P,B)Zn(μ-OCH₂Ph)]₂, fc = 1,1′-ferrocenediyl, pz = pyrazole). The synthesis of up to pentablock copolymers, from various combinations of LA and TMC, was accomplished and the physical, thermal, and mechanical properties of the resulting copolymers evaluated.

Amido Ca(ii) complexes supported by Schiff base ligands for catalytic cross-dehydrogenative coupling of amines with silanes

Heteroleptic Ca(ii) amides coordinated by multidentate phenolato ligands proved to be efficient catalysts for catalytic cross-dehydrogenative coupling of amines with silanes.

One-pot copolymerization of epoxides/carbon dioxide and lactide using a ternary catalyst system

A PLA/PPC multiblock copolymer was prepared using a novel ternary catalytic system that proceeds via an intermolecular chain transfer mechanism.

Functional Polycarbonate of a d-Glucal-Derived Bicyclic Carbonate via Organocatalytic Ring-Opening Polymerization

Herein, we demonstrate the synthesis of a bicyclic carbonate monomer of a d-glucal derivative, which originated from the natural product d-glucose, in an efficient three-step procedure and its ring-opening polymerization (ROP), initiated by 4-methylbenzyl alcohol, via organocatalysis. The ROP behavior was studied as a function of time, catalyst type, and catalyst concentration by using size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Using a cocatalyst system of 1,8-diazabicyclo[5.4.0]undec-7-ene and 1-(3,5-bis(trifluoromethyl)phenyl)-3-cyclohexyl-2-thiourea (5 mol %) afforded poly(d-glucal-carbonate) (PGCC) with almost complete monomer conversion (ca. 99%) within 1 min, as analyzed by ¹H NMR spectroscopy, and a monomodal SEC trace with dispersity of 1.13. The resulting PGCCs exhibited amorphous characteristics with a relatively high glass transition temperature at ca. 69 °C and onset decomposition temperature at ca. 190 °C, as analyzed by differential scanning calorimetry and thermogravimetric analysis, respectively. This new type of potentially degradable polymer system represents a reactive functional polymer architecture.

Crown ether complexes of potassium quinolin-8-olates: synthesis, characterization and catalysis toward the ring-opening polymerization of rac-lactide

Crown ether complexes of potassium quinolin-8-olates were synthesized and demonstrated to catalyze the stereoselective polymerization of rac-lactide.

Chlorophyll a crude extract: efficient photo-degradable photocatalyst for PET-RAFT polymerization

This work demonstrates use of spinach extracts for living radical polymerization bypassing catalyst synthesis/purification, degassing and catalyst removal procedures.