ansa-Bis(fluorenyl)neodymium Catalysts for Cyclocopolymerization of Ethylene with Butadiene

Installing a Trigger to Upcycle High-Density Polyethylene

Creating C═C bonds as "weak" sites in the stable C-C chains of polyethylene (PE) is an appealing strategy to promote sustainable development of the polyolefin industry. Compared to methods, such as dehydrogenation and postpolymerization modification, the copolymerization of ethylene (E) and butadiene (BD) should be a convenient and direct approach to introduce C═C bonds in PE, whereas it encounters problems in controlling the composition and regularity of the copolymer due to the mismatched activities and mechanisms between the two monomers. Herein, we report by employing the amidinate gadolinium complex, controllable E/BD copolymerization was achieved, where BD was incorporated in the uniformly discrete 1,4 mode. The obtained copolymer possesses the same physical, mechanical, processing, and antioxygen (aging at 100 °C for 28 days) properties as commercial high-density-PE, which, strikingly, were degraded by C═C bonds into α,ω-telechelic oligomers with narrow distribution. These degraded functional products were transferred to compatibilizers via atom-transfer radical polymerization or immortal ring-opening polymerization, achieving upcycling.

Rare-Earth Metallocenes for Polymerization of Olefins and Conjugated Dienes: From Fundamental Studies to Olefin Block Copolymers

The various steps in the mechanism of olefin polymerizations mediated by neutral rare-earth metallocene complexes are discussed. The complexes are either trivalent hydride and alkyl rare-earth compounds or divalent metallocenes that are activated by the monomer via an oxidation step. The stereospecific polymerizations of conjugated dienes based on the association of a cationic metallocene complex and an alkylaluminum and the polymerization mechanism based on monomer insertion into an aluminum-carbon bond are also discussed. The exploitation of metallocene complexes for the copolymerization of olefins with conjugated dienes is the subject of a third part of this review. The synthesis of new elastomers called ethylene butadiene rubber (EBR) is highlighted. Finally, the use of rare-earth metallocenes in macromolecular engineering is detailed. This includes the synthesis of functional polyolefins and block copolymers including thermoplastic elastomers.

Nitriles as Functionalization and Coupling Agents for Polyolefins Obtained by Coordinative Chain Transfer Polymerization

Coordinative chain transfer polymerization (CCTP) of ethylene and its copolymerization with 1,3-butadiene is conducted in toluene at 80 °C using a combination of {(Me2Si(C13H8)2)Nd(μ-BH4)[(μ-BH4)Li(THF)]}2 (1) metal complex and various organomagnesium compounds used as chain transfer agents including n-butyl-n-octyl-magnesium (BOMAG), n-butyl-mesityl-magnesium (n-BuMgMes), n-butyl-magnesium chloride (n-BuMgCl), n-pentyl-magnesium bromide (n-C5H11MgBr), pentanediyl-1,5-di(magnesium bromide) (PDMB) and isobutyl-magnesium chloride (i-BuMgCl). Kinetics and performance in terms of control of the (co)polymerization are comparatively discussed particularly considering the presence of ether and the nature of the organomagnesium compounds employed. Taking advantage of the well-known reactivity between nitrile and molecular organomagnesium compounds, the functionalization of the chains is further carried out by deactivation of the polymerization medium with benzonitrile or methoxybenzonitrile compounds leading to ketone ω-functionalized chains. The success of the functionalizations is extended to coupling strategies using dinitrile reagents and to the functionalization of high molar mass ethylene butadiene rubber (EBR).

Multiblock Copolymers Based on Highly Crystalline Polyethylene and Soft Poly(ethylene-co-butadiene) Segments: Towards Polyolefin Thermoplastic Elastomers

Block copolymers based on polyethylene (PE) and ethylene butadiene rubber (EBR) were obtained by successive controlled coordinative chain transfer polymerization (CCTP) of a mixture of ethylene and butadiene (80/20) and pure ethylene. EBR-b-PE diblock copolymers were synthesized using the {Me2 Si(C13 H8 )2 Nd(BH4 )2 Li(THF)}2 complex in combination with n-butyl,n-octyl magnesium (BOMAG) used as both the alkylating and chain transfer agent (CTA). Triblock and multiblock copolymers featuring highly semi-crystalline PE hard segments and soft EBR segments were further obtained by the development of a bimetallic CTA, the pentanediyl-1,5-di(magnesium bromide) (PDMB). These new block copolymers undergo crystallization-driven organization into lamellar structures and exhibit a variety of mechanical properties, including excellent extensibility and elastic recovery in the case of triblock and multiblock copolymers.

Switch from Anionic Polymerization to Coordinative Chain Transfer Polymerization: A Valuable Strategy to Make Olefin Block Copolymers

Anionic polymerization of butadiene or/and styrene is performed with lithium initiators, functional or not. The polymer chains are subsequently transferred to magnesium. The resulting polymeryl-magnesium compounds were combined with {(Me₂ Si(C₁₃ H₈ )₂ )Nd(μ-BH₄ )[(μ-BH₄ )Li(THF)]}₂ metallocene complex to act as macromolecular chain transfer agents (macroCTAs) in coordinative chain transfer polymerization (CCTP) of ethylene (E) or its copolymerization (CCTcoP) with butadiene (B). Block copolymers were produced for the first time by this switch from anionic polymerization to CCTP. Hard and soft blocks such as PB, polystyrene (PS), poly(styrene-co-butadiene) (SBR) obtained by anionic polymerization and PE or poly(ethylene-co-butadiene) (EBR) produced by CCT(co)P were combined and the corresponding structures were characterized.

Design of selective divalent chain transfer agent for coordinative chain transfer polymerization of ethylene and its copolymerization with butadiene

PhMg(CH2)5MgPh and MesMg(CH2)5MgMes – divalent bis-metalated chain transfer agents (CTA) – were designed, synthesized and implemented in the polymerization of ethylene or the copolymerization of ethylene with butadiene mediated by...

Cyclopolymerizations: Synthetic Tools for the Precision Synthesis of Macromolecular Architectures

Monomers possessing two functionalities suitable for polymerization are often designed and utilized in syntheses directed to the formation of cross-linked macromolecules. In this review, we give an account of recent developments related to the use of such monomers in cyclopolymerization processes, in order to form linear, soluble macromolecules. These processes can be activated by means of radical, ionic, or transition-metal mediated chain-growth polymerization mechanisms, to achieve cyclic moieties of variable ring size which are embedded within the polymer backbone, driving and tuning peculiar physical properties of the resulting macromolecules. The two functionalities are covalently linked by a "tether", which can be appropriately designed in order to "imprint" elements of chemical information into the polymer backbone during the synthesis and, in some cases, be removed by postpolymerization reactions. The two functionalities can possess identical or even very different reactivities toward the polymerization mechanism involved; in the latter case, consequences and outcomes related to the sequence-controlled, precision synthesis of macromolecules have been demonstrated. Recent advances in new initiating systems and polymerization catalysts enabled the precision syntheses of polymers with regulated cyclic structures by highly regio- and/or stereoselective cyclopolymerization. Cyclopolymerizations involving double cyclization, ring-opening, or isomerization have been also developed, generating unique repeating structures, which can hardly be obtained by conventional polymerization methods.

Polyolefins, a Success Story

This paper reports the principal discoveries which have played a major role in the polyolefin field and have positioned polyolefins as the most produced plastics. The early development of polyolefins covering the production of LDPE (Low density polyethylene) at ICI (Imperial Chemical Industries) and the discovery of Phillips or Ziegler-Natta catalysts are highlighted in the first section. In the second part, the impact of the implementation of molecular catalysts on the research in polyolefins is discussed together with the most recent advances leading to high-performance tailor-made resins.

cis-1,4-Selective Copolymerization of Ethylene and Butadiene: A Compromise between Two Mechanisms

Introducing ethylene units into polybutadiene backbones is an approach to synthesize advanced rubber materials, which has been a research challenge because of distinct polymerization mechanisms of the two monomers. To date, only trans-1,4- and 1,2-regulated copolymers have been obtained. Herein, we reported the unprecedented cis-1,4 selective copolymerization of ethylene and butadiene by using the thiophene-fused cyclopentadienyl-ligated scandium complexes. The effects of the sterics and electronics of the catalytic precursors as well as the monomer loading mode on the activity and selectivity as well as the sequence lengths were investigated, and the mechanism was elucidated. Thus a novel ethylene-based rubber material possessing a high molecular weight, 80 % cis-1,4 regularity and a T_g =-94 °C without an obvious melting point owing to short polyethylene sequences even at its content up to 45 mol %, was isolated. This new rubber material exhibited excellent anti-flowing performance and strong tensile strength.