Neutron Reflectivity Study of Free-End Distribution in Polymer Brushes

The structure of polymer brushes: the transition from dilute to dense systems: a computer simulation study

Monodisperse polymer brushes were studied by means of Monte Carlo simulations. A coarse-grained model of a polymer brush was designed and the Cooperative Motion Algorithm was employed to model the polymerization process 'grafted from' and to study the structure of a brush immersed in a good solvent. The structure of brushes was determined as a function of the chain length and the grafting density. The influence of these parameters on the scaling properties of the brush was presented and discussed. A thorough analysis of the distribution of concentrations of the polymer segments and the distribution of chain free ends was also carried out. The analysis of the depth of penetration of the low molecular weight solvent into the brush area showed that the main factor determining the penetration is the grafting density. Good agreement between the simulation results and theoretical predictions is observed, especially for longer chains and higher grafting density. The origin of small quantitative differences between the simulation and theoretical results is discussed.

Polymer Brush Coating and Adhesion Technology at Scale

Creating strong joints between dissimilar materials for high-performance hybrid products places high demands on modern adhesives. Traditionally, adhesion relies on the compatibility between surfaces, often requiring the use of primers and thick bonding layers to achieve stable joints. The coatings of polymer brushes enable the compatibilization of material surfaces through precise control over surface chemistry, facilitating strong adhesion through a nanometer-thin layer. Here, we give a detailed account of our research on adhesion promoted by polymer brushes along with examples from industrial applications. We discuss two fundamentally different adhesive mechanisms of polymer brushes, namely (1) physical bonding via entanglement and (2) chemical bonding. The former mechanism is demonstrated by e.g., the strong bonding between poly(methyl methacrylate) (PMMA) brush coated stainless steel and bulk PMMA, while the latter is shown by e.g., the improved adhesion between silicone and titanium substrates, functionalized by a hydrosilane-modified poly(hydroxyethyl methacrylate) (PHEMA) brush. This review establishes that the clever design of polymer brushes can facilitate strong bonding between metals and various polymer materials or compatibilize fillers or nanoparticles with otherwise incompatible polymeric matrices. To realize the full potential of polymer brush functionalized materials, we discuss the progress in the synthesis of polymer brushes under ambient and scalable industrial conditions, and present recent developments in atom transfer radical polymerization for the large-scale production of brush-modified materials.

Neutron reflectivity for soft matter

Specular neutron reflectivity is a technique enabling the measurement of coherent neutron scattering length density profile perpendicular to the plane of a surface or interface, and thereby the profile of chemical composition. The characteristic sizes that are probed range from around 5Å up 5000 Å. It is a scattering technique that averages information over the entire surface and it is therefore not possible to obtain information on correlations in the plane of the interface. The specific properties of neutrons (possibility of tuning the contrast by isotopic substitution, negligible absorption, low energy of the incident neutrons) makes it particularly interesting in the fields of soft matter and biophysics. This course is composed of three parts describing respectively its principle, the experimental aspects (diffractometers, samples), and some scientific examples of neutron reflectometry focusing on the use of contrast variation to probe polymeric systems.

Design of binary polymer brushes with tuneable functionality

Using coarse grained molecular dynamics simulations, we study how functionalized binary brushes may be used to create surfaces whose functionality can be tuned. Our model brushes consist of a mixture of nonresponsive polymers with functionalized responsive polymers. The functional groups switch from an exposed to a hidden state when the conformations of the responsive polymers change from extended to collapsed. We investigate quantitatively which sets of brush parameters result in optimal switching in functionality, by analyzing to which extent the brush conformation allows an external object to interact with the functional groups. It is demonstrated that brushes with species of comparable polymer lengths, or with longer responsive polymers than nonresponsive polymers, can show significant differences in their functionality. In the latter case, either the fraction of responsive polymers or the total grafting density has to be reduced. Among these possibilities, a reduction of the fraction of responsive polymers is shown to be most effective.

Enzyme immobilization on protein-resistant PNIPAAm brushes: impact of biotin linker length on enzyme amount and catalytic activity

Thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes with terminal click functionality can be used to selectively immobilize enzymes. Exploiting their inherent protein-repellent and thus non-fouling properties, surfaces with specific bioactivity can be created in this way. This report describes the functionalization of alkyne-PNIPAAm brushes with two biotin linkers of different poly(ethylene glycol) (PEG) spacer length via click chemistry and the subsequent immobilization of streptavidin-conjugated horseradish peroxidase (SA-HRP) by the strong interaction between biotin and streptavidin. Spectroscopic ellipsometry is used to quantify the biotin and the SA-HRP amount on the PNIPAAm brushes. Enzyme activities are determined by UV‑vis spectroscopy. A better accessibility to the alkyne-functionalized chain ends for the short biotin-PEG₃ linker leads to a higher biotin amount on these PNIPAAm brushes, which in turn results in higher SA‑HRP amounts on biotin-PEG₃-modified brushes in the swollen (20 °C) and collapsed state (37 °C) compared to biotin-PEG₂₃-modified ones. For both linkers, an increased immobilization temperature leads to higher SA-HRP amounts due to an enhanced reaction kinetics and mobility. All immobilized SA-HRP amounts are in range of 81-98% monolayer coverage, except for SA-HRP immobilized on biotin-PEG₂₃-modified PNIPAAm brushes at 20 °C, exhibiting only 43% monolayer coverage. A high mobility of the biotin linker combined with a low surface loading of SA-HRP is found to be beneficial for the activity of SA-HRP. Hence, the highest specific activity as measured by HRP-catalyzed 3,3´,5,5´‑tetramethylbenzidine (TMB) oxidation is found for a low SA-HRP amount on biotin-PEG₂₃-modified brushes.

Efficient and Tunable Three-Dimensional Functionalization of Fully Zwitterionic Antifouling Surface Coatings

To enhance the sensitivity and selectivity of surface-based (bio)sensors, it is of crucial importance to diminish background signals that arise from the nonspecific binding of biomolecules, so-called biofouling. Zwitterionic polymer brushes have been shown to be excellent antifouling materials. However, for sensing purposes, antifouling does not suffice but needs to be combined with the possibility to efficiently modify the brush with recognition units. So far this has been achieved only at the expense of either antifouling properties or binding capacity. Herein we present a conceptually new approach by integrating both characteristics into a single tailor-made monomer: a novel sulfobetaine-based zwitterionic monomer equipped with a clickable azide moiety. Copolymerization of this monomer with a well-established standard sulfobetaine monomer results in highly antifouling surface coatings with a large yet tunable number of clickable groups present throughout the entire brush. Subsequent functionalization of the azido brushes via widely used strain-promoted alkyne azide click reactions yields fully zwitterionic 3D-functionalized coatings with a recognition unit of choice that can be tailored for any specific application. Here we show a proof of principle with biotin-functionalized brushes on Si₃N₄ that combine excellent antifouling properties with specific avidin binding from a protein mixture. The signal-to-noise ratio is significantly improved over that of traditional chain-end modification of sulfobetaine polymer brushes, even if the azide content is lowered to 1%. This therefore offers a viable approach to the development of biosensors with greatly enhanced performance on any surface.