Synthesis of Brush Copolymers Based on a Poly(1,4-butadiene) Backbone via the “Grafting From” Approach by ROMP and ATRP

Cobalt catalysed controlled copolymerization: an efficient approach to bifunctional polyisoprene with enhanced properties

Bifunctional polyisoprene with controlled molecular weight was obtained by coordination insertion polymerization.

Amphiphilic multicomponent molecular brushes

Multicomponent molecular brushes containing amphiphilic polymer moieties are promising objects of research of macromolecular chemistry. The development of stimulus-responsive systems sensitive to changes in environmental parameters, based on the molecular brushes, opens up new possibilities for their applications in medicine, biochemistry and microelectronics. The review presents the current understanding of the structures of main types of amphiphilic multicomponent brushes, depending on the chemical nature and type of coupling of the backbone and side chains. The approaches to the controlled synthesis of multicomponent molecular brushes of different architecture are analyzed. Self-assembly processes of multicomponent molecular brushes in selective solvents are considered.

The bibliography includes 259 references.

Grubbs' and Schrock's Catalysts, Ring Opening Metathesis Polymerization and Molecular Brushes-Synthesis, Characterization, Properties and Applications

In this review, molecular brushes and other macromolecular architectures bearing a bottlebrush segment where the main chain is synthesized by ring opening metathesis polymerization (ROMP) mediated by Mo or Ru metal complexes are considered. A brief review of metathesis and ROMP is presented in order to understand the problems and the solutions provided through the years. The synthetic strategies towards bottlebrush copolymers are demonstrated and each one discussed separately. The initiators/catalysts for the synthesis of the backbone with ROMP are discussed. Syntheses of molecular brushes are presented. The most interesting properties of the bottlebrushes are detailed. Finally, the applications studied by different groups are presented.

Preparation and property investigation of chain end functionalized cis-1,4 polybutadienes via de-polymerization and cross metathesis of cis-1,4 polybutadienes

The end-functional cis-1,4 polybutadiene displayed improved thermal stability and mechanistic properties.

Preparation of thermo-responsive graft copolymer by using a novel macro-RAFT agent and its application for drug delivery

A methodology to prepare thermo-responsive graft copolymer by using a novel macro-RAFT agent was proposed. The macro-RAFT agent with pendant dithioester (ZC(S)SR) was facilely prepared via the combination of RAFT polymerization and esterification reaction. By means of ZC(S)SR-initiated RAFT polymerization, the thermo-responsive graft copolymer consisting of poly(methyl methacrylate-co-hydroxylethyl methacrylate) (P(MMA-co-HEMA)) backbone and hydrophilic poly(N-isopropylacrylamide) (PNIPAAm) side chains was constructed through the "grafting from" approach. The chemical compositions and molecular weight distributions of the synthesized polymers were respectively characterized by (1)H nuclear magnetic resonance ((1)H NMR) and gel permeation chromatography (GPC). Self-assembly behavior of the amphiphilic graft copolymers (P(MMA-co-HEMA)-g-PNIPAAm) was studied by transmission electron microscopy (TEM), dynamic light scattering (DLS) and spectrofluorimeter. The critical micelle concentration (CMC) value was 0.052 mg mL(-1). These micelles have thermo-responsibility and a low critical solution temperature (LCST) of 33.5°C. Further investigation indicated that the guest molecule release property of these micelles, which can be well described by a first-order kinetic model, was significantly affected by temperature. Besides, the micelles exhibited excellent biocompatibility and cellular uptake property. Hence, these micelles are considered to have potential application in controlled drug delivery.

Efficient synthesis of narrowly dispersed amphiphilic double-brush copolymers through the polymerization reaction of macromonomer micelle emulsifiers at the oil–water interface

Narrowly dispersed amphiphilic PMA-g-PMMA/PDMA DBCs with high molecular weight were efficiently synthesized by Pickering emulsion template directed radical polymerization of macromonomer micelles.

Synthesis and characterization of brush-like multigraft copolymers PnBA-g-PMMA by a combination of emulsion AGET ATRP and emulsion polymerization

In this paper, poly(n-butyl acrylate)-g-poly(methyl methacrylate) multigraft copolymers were synthesized by macromonomer technique and miniemulsion copolymerization. The PMMA macromonomers were obtained by an activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) in emulsion system and subsequent allylation. Then the copolymerization of different macromonomers with nBA was carried out in miniemulsion system, obtaining multigraft copolymers with high molecular weight. The latex particles and distribution of emulsion AGET ATRP and miniemulsion copolymerization were characterized using laser light scattering. The molecular weight and polydispersity indices of macromonomers and multigraft copolymers were analyzed by gel permeation chromatography, and the number-average molecular weight range is 187,600-554,800 g/mol for PnBA-g-PMMA copolymers. In addition, the structural characteristics of macromonomer and brush-like copolymers were determined by infrared spectra and (1)H nuclear magnetic resonance spectroscopy. The thermal performance of brush-like copolymers were characterized by differential scanning calorimetry and thermogravimetric analysis. Atomic force microscopy results showed that the degree of microphase separation was varying with increasing PMMA content in PnBA-g-PMMA. The dynamic rheometer analysis revealed that multigraft copolymer with PMMA content of 31.4% exhibited good elastomeric properties to function as a TPE. These multigraft copolymers show a promising low cost and environmental friendly thermoplastic elastomer.

Synthesis and characterization of graft copolymers PnBA-g-PS by miniemulsion polymerization

PnBA-g-PS by emulsion AGET ATRP and miniemulsion polymerization.

A novel strategy to synthesize well-defined PS brushes on silica particles by combination of lithium–iodine exchange (LIE) and surface-initiated living anionic polymerization (SI-LAP)

SiO₂ particles coated by well-defined brushlike polystyrene are successfully prepared by the combination of lithium–iodine exchange and surface-initiated living anionic polymerization.

Silica nanoparticles functionalized via click chemistry and ATRP for enrichment of Pb(II) ion

Silica nanoparticles have been functionalized by click chemistry and atom transfer radical polymerization (ATRP) simultaneously. First, the silanized silica nanoparticles were modified with bromine end group, and then the azide group was grafted onto the surface via covalent coupling. 3-Bromopropyl propiolate was synthesized, and then the synthesized materials were used to react with azide-modified silica nanoparticles via copper-mediated click chemistry and bromine surface-initiated ATRP. Transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis were performed to characterize the functionalized silica nanoparticles. We investigated the enrichment efficiency of bare silica and poly(ethylene glycol) methacrylate (PEGMA)-functionalized silica nanoparticles in Pb(II) aqueous solution. The results demonstrated that PEGMA-functionalized silica nanoparticles can enrich Pb(II) more quickly than pristine silica nanoparticles within 1 h.

Core-clickable PEG-branch-azide bivalent-bottle-brush polymers by ROMP: grafting-through and clicking-to

The combination of highly efficient polymerizations with modular "click" coupling reactions has enabled the synthesis of a wide variety of novel nanoscopic structures. Here we demonstrate the facile synthesis of a new class of clickable, branched nanostructures, polyethylene glycol (PEG)-branch-azide bivalent-brush polymers, facilitated by "graft-through" ring-opening metathesis polymerization of a branched norbornene-PEG-chloride macromonomer followed by halide-azide exchange. The resulting bivalent-brush polymers possess azide groups at the core near a polynorbornene backbone with PEG chains extended into solution; the structure resembles a unimolecular micelle. We demonstrate copper-catalyzed azide-alkyne cycloaddition (CuAAC) "click-to" coupling of a photocleavable doxorubicin (DOX)-alkyne derivative to the azide core. The CuAAC coupling was quantitative across a wide range of nanoscopic sizes (∼6-∼50 nm); UV photolysis of the resulting DOX-loaded materials yielded free DOX that was therapeutically effective against human cancer cells.

Drug-loaded, bivalent-bottle-brush polymers by graft-through ROMP

Graft-through ring-opening metathesis polymerization (ROMP) using ruthenium N-heterocyclic carbene catalysts has enabled the synthesis of bottle-brush polymers with unprecedented ease and control. Here we report the first bivalent-brush polymers; these materials were prepared by graft-through ROMP of drug-loaded polyethylene-glycol (PEG) based macromonomers (MMs). Anticancer drugs doxorubicin (DOX) and camptothecin (CT) were attached to a norbornene-alkyne-PEG MM via a photocleavable linker. ROMP of either or both drug-loaded MMs generated brush homo- and co-polymers with low polydispersities and defined molecular weights. Release of free DOX and CT from these materials was initiated by exposure to 365 nm light. All of the CT and DOX polymers were at least 10-fold more toxic to human cancer cells after photoinitiated drug release while a copolymer carrying both CT and DOX displayed 30-fold increased toxicity upon irradiation. Graft-through ROMP of drug-loaded macromonomers provides a general method for the systematic study of structure-function relationships for stimuli-responsive polymers in biological systems.

Well-defined PMMA brush on silica particles fabricated by surface-initiated photopolymerization (SIPP)

The photochemical method is a convenient and simple way to synthesize the polymer brush on surface. We presented here a facile approach to fabricate PMMA brush on silica particles (SPs) by combination of self-assembly monolayer of hyperbranched polymeric thioxanthone (HPTX) and surface-initiated photopolymerization (SIPP). HPTX was immobilized on the surface of silica particles (SPs) through nucleophilic addition between amine and epoxy groups, and then initiated photopolymerization of MMA to generate PMMA brush on SPs at room temperature. The whole process was well-traced by FT-IR, TGA, SEM, and TEM. The results show that it is easy to create PMMA brushes of tunable thickness under UV irradiation. Especially, TEM images reveal the obvious formation of well-defined hybrid particles with SPs as the core and PMMA layers as the shell. The obtained hybrid particles can be implanted into PMMA matrix to produce PMMA composite with enhanced thermal and mechanical properties.