Single-Electron Transfer Living Radical Polymerization (SET−LRP) of Methyl Methacrylate (MMA) with a Typical RAFT Agent as an Initiator

Mussel-inspired construction of thermo-responsive double-hydrophilic diblock copolymers-decorated reduced graphene oxide as effective catalyst supports for highly dispersed superfine Pd nanoparticles

Well-dispersed ultrafine palladium nanoparticles supported by reduced graphene oxide functionalized with catechol-terminated thermo-responsive block copolymer (PdNPs@BPrGO) were successfully constructed for highly efficient heterogeneous catalytic reduction. We first synthesized a novel temperature-responsive episulfide-containing double-hydrophilic diblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate-co-2,3-epithiopropyl methacrylate)-block-poly(N-isopropylacrylamide) (P(PEGMA-co-ETMA)-b-PNIPAM), through a reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing a chain-transfer agent with a catechol unit as the end group. The obtained block copolymers can be facilely anchored to the surface of GO via mussel-inspired chemistry. The PdNPs were loaded on GO decorated with block copolymer brushes (BPrGO) as a support via the in situ reduction of palladium precursors with the episulfide ligands of the block copolymer as a stabilizer. The resulting PdNPs@BPrGO nanohybrid catalyst had good water dispersibility and stability. Furthermore, a low dosage of PdNPs@BPrGO catalyst exhibited excellent catalytic performance in the reduction of methylene blue and nitrophenols. The performance was attributed to the ability of PdNPs@BPrGO to facilitate the diffusion of reactants compared to PdNPs@GO without polymer modification. PdNPs@BPrGO also possessed an interesting temperature-responsive catalytic property due to the reversible "coil-to-globule" phase transition behaviour of PNIPAM blocks onto the surface of catalyst. The PdNPs@BPrGO catalyst was successfully recovered and reused five times without any detectible loss in catalytic activity, demonstrating its great potential in a wide range of industrial catalytic applications.

Copolymerization of Phenylselenide-Substituted Maleimide with Styrene and Its Oxidative Elimination Behavior

Selenium-containing monomer monophenyl maleimide selenide (MSM) was synthesized and copolymerized with styrene (St) using reversible addition-fragmentation chain transfer (RAFT) polymerization. Copolymers with controlled molecular weight and narrow molecular weight distribution were obtained. The structure of the copolymer was characterized by nuclear magnetic resonance, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrum, Fourier transform infrared spectroscopy (FT-IR) and Ultraviolet⁻visible spectroscopy (UV-vis) spectroscopy. The copolymer can be oxidized by H₂O₂ to form carbon-carbon double bonds within the main chain due to the unique sensitivity of selenide groups in the presence of oxidants. Such structure changing resulted in an interesting concentration-related photoluminescence emission enhancement.

Metal Free Reversible-Deactivation Radical Polymerizations: Advances, Challenges, and Opportunities

A considerable amount of the worldwide industrial production of synthetic polymers is currently based on radical polymerization methods. The steadily increasing demand on high performance plastics and tailored polymers which serve specialized applications is driven by the development of new techniques to enable control of polymerization reactions on a molecular level. Contrary to conventional radical polymerization, reversible-deactivation radical polymerization (RDRP) techniques provide the possibility to prepare polymers with well-defined structures and functionalities. The review provides a comprehensive summary over the development of the three most important RDRP methods, which are nitroxide mediated radical polymerization, atom transfer radical polymerization and reversible addition fragmentation chain transfer polymerization. The focus thereby is set on the newest developments in transition metal free systems, which allow using these techniques for biological or biomedical applications. After each section selected examples from materials synthesis and application to biomedical materials are summarized.

Nanocellulose in green food packaging

The development of packaging materials with new functionalities and lower environmental impact is now an urgent need of our society. On one hand, the shelf-life extension of packaged products can be an answer to the exponential increase of worldwide demand for food. On the other hand, uncertainty of crude oil prices and reserves has imposed the necessity to find raw materials to replace oil-derived polymers. Additionally, consumers' awareness toward environmental issues increasingly pushes industries to look with renewed interest to "green" solutions. In response to these issues, numerous polymers have been exploited to develop biodegradable food packaging materials. Although the use of biopolymers has been limited due to their poor mechanical and barrier properties, these can be enhanced by adding reinforcing nanosized components to form nanocomposites. Cellulose is probably the most used and well-known renewable and sustainable raw material. The mechanical properties, reinforcing capabilities, abundance, low density, and biodegradability of nanosized cellulose make it an ideal candidate for polymer nanocomposites processing. Here we review the potential applications of cellulose based nanocomposites in food packaging materials, highlighting the several types of biopolymers with nanocellulose fillers that have been used to form bio-nanocomposite materials. The trends in nanocellulose packaging applications are also addressed.

RAFT Polymerization of Styrene and Maleimide in the Presence of Fluoroalcohol: Hydrogen Bonding Effects with Classical Alternating Copolymerization as Reference

The impacts of hydrogen bonding on polymerization behavior has been of interest for a long time; however, universality and in-depth understanding are still lacking. For the first time, the effect of hydrogen bonding on the classical alternating-type copolymerization of styrene and maleimide was explored. N-phenylmaleimide (N-PMI)/styrene was chosen as a model monomer pair in the presence of hydrogen bonding donor solvent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), which interacted with N-PMI via hydrogen bonding. Reversible addition-fragmentation chain transfer polymerization (RAFT) technique was used to guarantee the "living" polymerization and thus the homogeneity of chain compositions. In comparison with the polymerization in nonhydrogen bonding donor solvent (toluene), the copolymerization in HFIP exhibited a high rate and a slight deviation from alternating copolymerization tendency. The reactivity ratios of N-PMI and St were revealed to be 0.078 and 0.068, respectively, while the reactivity ratios in toluene were 0.026 and 0.050. These interesting results were reasonably explained by using computer simulations, wherein the steric repulsion and electron induction by the hydrogen bonding between HFIP and NPMI were revealed. This work first elucidated the hydrogen bonding interaction in the classical alternating-type copolymerization, which will enrich the research on hydrogen bonding-induced polymerizations.

Induction of supramolecular chirality by chiral solvation in achiral Azo polymers with different spacer lengths and push–pull electronic substituents: where will chiral induction appear?

Effects of achiral azobenzene polymers with different spacer lengths and push–pull electronic substituents on supramolecular chirality induced by chiral limonene are reported in detail.

Ex situ Cu(0) nanoparticle mediated SET-LRP of methyl methacrylate/styrene-methyl methacrylate in a biphasic toluene–water system

Cu(0) nanoparticles mediated SET-LRP of methyl methacrylate/styrene-methyl methacrylate in biphasic toluene–water system.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

Reversible Addition-Fragmentation Chain Transfer Polymerization of Acrylonitrile under Irradiation of Blue LED Light

Compared to unhealthy UV or γ-ray and high-energy-consumption thermal external stimuli, the promising light emitting diode (LED) external stimulus has some outstanding technological merits such as narrow wavelength distribution, low heat generation and energy consumption, and safety for human beings. In this work, a novel reversible addition-fragmentation transfer (RAFT) polymerization system for acrylonitrile (AN) was developed under the irradiation of blue LED light at room temperature, using 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) as a novel radical initiator and 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as the typical chain transfer agent. Well-defined polyacrylonitrile (PAN) with a controlled molecular weight and narrow molecular weight distribution was successfully synthesized. This strategy may provide another effective method for scientific researchers or the industrial community to synthesize a PAN-based precursor of carbon fibers.

Scaled down glass transition temperature in confined polymer nanofibers

Arrays of polymer nanostructures have been widely used in many novel devices and nanofabrication methods. The glass transition temperature, which is a key parameter influencing the long-term stability of polymer nanostructures, has not yet been systematically studied and well understood. Here we study this technological and fundamental issue with polymers of different values of molar mass M confined in nanocylinders of a varying diameter D. The glass transition temperature Tg loses its dependence on the molar mass for D ≲ 100 nm, a range in which the relative depression of Tg varies as D(-0.44). For higher cylinder diameters, Tg progressively recovers its dependence on the molar mass. This is quantitatively reproduced by a model based on an equilibrium interfacial excess of free volume, which needs to be created unless provided by the chain ends. Our findings suggest that the structural perturbations during nanofabrication may strongly affect the long-term stability of arrays of polymer nanostructures.

Grafting of functional methacrylate polymer brushes by photoinduced SET-LRP

The growth of polymer brushes from a variety of methacrylate monomers was accomplished using UV light as a polymerization trigger.

Cu(0)-mediated living radical polymerization: recent highlights and applications; a perspective

Cu(0)-mediated living radical polymerization or single electron transfer living radical polymerization (Cu(0)-mediated LRP or SET-LRP) is a versatile polymerization technique that has attracted considerable interest during the past few years for the facile preparation of advanced materials.

Zero valent metal/RAFT agent mediated CRP of functional monomers at room temperature: a promising catalyst system for CRP

A facile approach to synthesize GMA polymers using Fe(0)/RAFT agent mediated control radical polymerization.

Manganese(iii) acetylacetonate initiated RAFT polymerizations: an alternative and versatile RAFT initiator

Manganese(iii) acetylacetonate (Mn(acac)₃) was demonstrated to be a versatile and superior RAFT initiator for different kinds of monomers, RAFT agents and noticeably, for a wide range of temperatures.

Reversible deactivation radical polymerization in the presence of zero-valent metals: from components to precise polymerization

We highlight recent work from the advent of zero-valent metal-mediated RDRP looking at advances in its components and the synthesis of well-defined polymers.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.

End Group Reactions of RAFT-Prepared (Co)Polymers

This review highlights the chemistry of thiocarbonylthio groups with an emphasis on chemistry conducted at ω or α and ω chain-ends in copolymers prepared by reversible addition–fragmentation chain-transfer (RAFT) radical polymerization. We begin by giving a general overview of reactions associated with the thiocarbonylthio groups, followed by examples associated with macromolecular thiols.