Synthesis and Stabilization of Novel Aliphatic Polycarbonate from Renewable Resource

High-Glass-Transition Polyesters Produced with Phthalic Anhydride and Epoxides by Ring-Opening Copolymerization (ROCOP)

Polyesters with a high glass transition temperature above 130 °C were obtained from limonene oxide (LO) or vinylcyclohexene oxide (VCHO) and phthalic anhydride (PA) in the presence of commercial salen-type complexes with different metals-Cr, Al, and Mn-as catalysts in combination with 4-(dimethylamino) pyridine (DMAP), bis-(triphenylphosphorydine) ammonium chloride (PPNCl), and bis-(triphenylphosphoranylidene)ammonium azide (PPNN₃) as cocatalysts via alternating ring-opening copolymerization (ROCOP). The effects of the time of precontact between the catalyst and cocatalyst and the polymerization time on the productivity, molar mass (M_w), and glass transition temperature (T_g) were evaluated. The polyesters were characterized by a molar mass (M_w) of up to 14.0 kg/mol, a narrow dispersity T_g of up to 136 °C, and low (<3 mol%) polyether units. For poly(LO-alt-PA) copolymers, biodegradation tests were performed according to ISO 14851 using the respirometric biochemical oxygen demand method. Moreover, the vinyl double bond present in the poly(LO-alt-PA) copolymer chain was functionalized using three different thiols, methyl-3-mercaptopropionate, isooctyl-3-mercaptopropionate, and butyl-3-mercaptopropionate, via a click chemistry reaction. The thermal properties of poly(LO-alt-PA), poly(VCHO-alt-PA) and thiol-modified poly(LO-alt-PA) copolymers were extensively studied by DSC and TGA. Some preliminary compression molding tests were also conducted.

Biodegradable polycarbonates from lignocellulose based 4-pentenoic acid and carbon dioxide

The production of biodegradable polycarbonate by copolymerizing CO₂ with epoxides has emerged as an effective method to utilize CO₂ in response to growing concerns about CO₂ emissions and plastic pollution. Previous studies have mainly focused on the preparation of CO₂-based polycarbonates from petrochemical-derived propylene oxide (PO) or cyclohexene oxide (CHO). However, to reduce dependence on fossil fuels, the development of 100% bio-based polymers has gained attention in polymer synthesis. Herein, we reported the synthesis of glycidyl 4-pentenoate (GPA) from lignocellulose based 4-pentenoic acid (4-PA), which was further copolymerized with CO₂ using a binary catalyst SalenCoCl/PPNCl to produce bio-based polycarbonates with vinyl side chains and molecular weights up to 17.1 kg/mol. Introducing a third monomer, PO, allows for the synthesis of the GPA/PO/CO₂ terpolymer, and the glass transition temperature (T _g) of the terpolymer can be adjusted from 2°C to 19°C by controlling the molar feeding ratio of GPA to PO from 7:3 to 3:7. Additionally, post-modification of the vinyl side chains enables the production of functional polycarbonates, providing a novel approach to the preparation of bio-based materials with diverse side chains and functions.

Aldehyde end-capped CO2-based polycarbonates: a green synthetic platform for site-specific functionalization

Aldehyde end-capped CO2-based polycarbonates were prepared to serve as a green platform for the construction of diverse functional polymers.

Catalytic, Kinetic, and Mechanistic Insights into the Fixation of CO2 with Epoxides Catalyzed by Phenol-Functionalized Phosphonium Salts

A series of hydroxy-functionalized phosphonium salts were studied as bifunctional catalysts for the conversion of CO2 with epoxides under mild and solvent-free conditions. The reaction in the presence of a phenol-based phosphonium iodide proceeded via a first order rection kinetic with respect to the substrate. Notably, in contrast to the aliphatic analogue, the phenol-based catalyst showed no product inhibition. The temperature dependence of the reaction rate was investigated, and the activation energy for the model reaction was determined from an Arrhenius-plot (Ea =39.6 kJ mol-1 ). The substrate scope was also evaluated. Under the optimized reaction conditions, 20 terminal epoxides were converted at room temperature to the corresponding cyclic carbonates, which were isolated in yields up to 99 %. The reaction is easily scalable and was performed on a scale up to 50 g substrate. Moreover, this method was applied in the synthesis of the antitussive agent dropropizine starting from epichlorohydrin and phenylpiperazine. Furthermore, DFT calculations were performed to rationalize the mechanism and the high efficiency of the phenol-based phosphonium iodide catalyst. The calculation confirmed the activation of the epoxide via hydrogen bonding for the iodide salt, which facilitates the ring-opening step. Notably, the effective Gibbs energy barrier regarding this step is 97 kJ mol-1 for the bromide and 72 kJ mol-1 for the iodide salt, which explains the difference in activity.

Integrated and Consolidated Review of Plastic Waste Management and Bio-Based Biodegradable Plastics: Challenges and Opportunities

Cumulative plastic production worldwide skyrocketed from about 2 million tonnes in 1950 to 8.3 billion tonnes in 2015, with 6.3 billion tonnes (76%) ending up as waste. Of that waste, 79% is either in landfills or the environment. The purpose of the review is to establish the current global status quo in the plastics industry and assess the sustainability of some bio-based biodegradable plastics. This integrative and consolidated review thus builds on previous studies that have focused either on one or a few of the aspects considered in this paper. Three broad items to strongly consider are: Biodegradable plastics and other alternatives are not always environmentally superior to fossil-based plastics; less investment has been made in plastic waste management than in plastics production; and there is no single solution to plastic waste management. Some strategies to push for include: increasing recycling rates, reclaiming plastic waste from the environment, and bans or using alternatives, which can lessen the negative impacts of fossil-based plastics. However, each one has its own challenges, and country-specific scientific evidence is necessary to justify any suggested solutions. In conclusion, governments from all countries and stakeholders should work to strengthen waste management infrastructure in low- and middle-income countries while extended producer responsibility (EPR) and deposit refund schemes (DPRs) are important add-ons to consider in plastic waste management, as they have been found to be effective in Australia, France, Germany, and Ecuador.

Tuning the thermoreversible temperature domain of PTMC-based networks with thermosensitive links concentration

In this work, thermoreversible poly(trimethylene carbonate) (PTMC) based networks with different crosslinking densities were obtained by Diels-Alder (DA) reaction between furan-functionalized PTMC precursors and a bismaleimide. Furan-grafted PTMC with various functionalities determined by ¹H-NMR analyses were prepared from telechelic PTMC oligomer, glycerol, 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI) and furfuryl alcohol. The formation of network structures by DA reaction between furan and maleimide groups were proved by Fourier-transform infrared spectroscopy (FT-IR). Although both exo and endo DA adduct forms exist, the thermally more stable exo form dominates. The thermoreversibility of networks was evidenced by FT-IR, solubility, differential scanning calorimetry (DSC) and rheology experiments at different temperatures. By increasing furan functionality or node concentration, denser and stiffer networks could be formed with higher Young's modulus and true stress at break in tensile tests, as well as higher crossover temperature, which indicates a nominal transition from elastic behavior to viscous state. The disruption of networks was found to occur in high temperature ranges from 130 to 160 °C, depending on their crosslinking density.

Carbonyl group and carbon dioxide activation by rare-earth-metal complexes

The rare-earth elements (Ln = Sc, Y, La-Lu) are widely used in stoichiometric and catalytic carbonyl group transformations. Sufficient availability, non-toxicity, high oxophilicity, tunable ion size/Lewis acidity and enhanced ligand exchangeability have been major driving factors for their successful implementation. Routinely employed reagents for stoichiometric carbonyl group transformations are divalent ytterbium and samarium compounds (e.g., ketone reduction), bimetallic CeCl3/LiR (C-C coupling), or ceric ammonium nitrate CAN (cyclic ketone oxidation). Rare-earth-metal triflates, and in particular Sc(OTf)3, are prominent examples of Lewis acid catalysts for versatile use in organic synthesis (e.g., Aldol and Michael reactions). Moreover, Ln(ii) and Ln(iii) complexes efficiently catalyze the (co)polymerization of carbonyl group-containing monomers including lactones, lactides, acrylates, and carbon dioxide. Featuring the most notorious greenhouse gas, CO2 is currently assessed as a cheap, abundant, and non-toxic C1 building block. Ln(iii) complexes are not only capable of efficient CO2 capture via reversible insertion but also of CO2 activation for catalytic conversions (copolymerization/cycloaddition with epoxides). This perspective focuses on structurally elucidated Ln complexes resulting from ketone or carbonyl derivative activation/insertion as well as carbon dioxide insertion products. The respective compounds will be sorted by structural motifs and, if applicable, details on reactivity and feasibility of catalytic reactions are presented. The article is subdivided in three parts: (i) donor and insertion products of ketones and aldehydes, (ii) redox-enhanced activation of carbonyl derivatives, and (iii) CO2 insertion/redox products and homogeneous catalytic conversion.

Ring-opening copolymerization (ROCOP): synthesis and properties of polyesters and polycarbonates

This feature article highlights the opportunities presented by ring-opening copolymerization (ROCOP) as a controlled route to prepare polyesters and polycarbonates.