Hydrogen-Bonding-Driven Complexation of Polystyrene-block-poly(ethylene oxide) Micelles with Poly(acrylic acid)

Structural Evolution of a Polystyrene-Block-Poly(Ethylene Oxide) Block Copolymer in Tetrahydrofuran/Water Cosolvents

This study aims to quantitatively investigate the effect of water content on the self-assembly behavior of polystyrene-block-poly(ethylene oxide) (PS-b-PEO) in tetrahydrofuran/water cosolvents by small-angle X-ray scattering. PS-b-PEO chains preferentially form fractal aggregates at a dilute concentration in neat tetrahydrofuran (THF). By adding a small amount of water into THF, PS-b-PEO forms gelled networks. The gelled networks have correlated inhomogeneities, which were generated through mesophase separation. These gelled networks are not present when PS-b-PEO is dissolved in THF/methanol and THF/ethanol cosolvents. The substitution of water with 12 M HCl reduces the viscosity of the gelled networks. Those results indicate that the gelled networks of PS-b-PEO need hydrogen bonds formed from surrounding water molecules to be bridging agents, which connect different PEO block chains together. Upon increasing the water content in THF/water cosolvents, dispersed micelles with a core-shell conformation or aggregated micelles preferentially coexist with fractal aggregates.

Micellization of Polystyrene-b-Polyglycidol in Dioxane and Water/Dioxane Solutions

In this work, the self-assembly of a series of amphiphilic polystyrene-b-polyglycidol (PS-b-PGL) diblock copolymers in dioxane and dioxane/water mixtures is presented. The PS-b-PGL have an average degree of polymerization (DP) of PS block equal to 29 units and varied degrees of polymerization for the glycidol segments with DPs of 13, 42, 69 and 117. In dioxane, amphiphilic diblock copolymers form micelles with the hydrophilic PGL placed in the core. Critical micelle concentration (CMC) was determined based on the intensity of scattered light vs. concentration. The micelle size was measured by dynamic light scattering and transmission electron microscopy. Also, the behaviour of the copolymer was studied in water/dioxane solutions by following the changes of scattered light intensity with the addition of water to the system. Critical water content (CWC) of the studied systems decreased as the initial PS-b-PGL concentration in dioxane increased. This process was accompanied by a decrease in the size of aggregate formed. For a given initial copolymer concentration, the size of copolymer aggregates decreased linearly with increasing the length of the PGL block

Polymer-guided assembly of inorganic nanoparticles

The self-assembly of inorganic nanoparticles is of great importance in realizing their enormous potentials for broad applications due to the advanced collective properties of nanoparticle ensembles. Various molecular ligands (e.g., small molecules, DNAs, proteins, and polymers) have been used to assist the organization of inorganic nanoparticles into functional structures at different hierarchical levels. Among others, polymers are particularly attractive for use in nanoparticle assembly, because of the complex architectures and rich functionalities of assembled structures enabled by polymers. Polymer-guided assembly of nanoparticles has emerged as a powerful route to fabricate functional materials with desired mechanical, optical, electronic or magnetic properties for a broad range of applications such as sensing, nanomedicine, catalysis, energy storage/conversion, data storage, electronics and photonics. In this review article, we summarize recent advances in the polymer-guided self-assembly of inorganic nanoparticles in both bulk thin films and solution, with an emphasis on the role of polymers in the assembly process and functions of resulting nanostructures. Precise control over the location/arrangement, interparticle interaction, and packing of inorganic nanoparticles at various scales are highlighted.

Core–shell polymeric nanoparticles comprising BODIPY and fluorescein as ultra-bright ratiometric fluorescent pH sensors

Ultra-bright pH-sensitive fluorescent nanoparticles, including BODIPY in their core and fluorescein in their shell, are synthesized. They contain more than 2500 fluorophores and exhibit a linear fluorescence response between pH 5.5 and 7.5.

Tunable Pickering Emulsions with Environmentally Responsive Hairy Silica Nanoparticles

Surface modification of the nanoparticles using surface anchoring of amphiphilic polymers offers considerable scope for the design of a wide range of brush-coated hybrid nanoparticles with tunable surface wettability that may serve as new class of efficient Pickering emulsifiers. In the present study, we prepared mixed polymer brush-coated nanoparticles by grafting ABC miktoarm star terpolymers consisting of poly(ethylene glycol), polystyrene, and poly[(3-triisopropyloxysilyl)propyl methacrylate] (μ-PEG-b-PS-b-PIPSMA) on the surface of silica nanoparticles. The wettability of the as-prepared nanoparticles can be precisely tuned by a change of solvent or host-guest complexation. ¹H NMR result confirmed that such wettability change is due to the reorganization of the polymer chain at the grafted layer. We show that this behavior can be used for stabilization and switching between water-in-oil (W/O) and oil-in-water (O/W) emulsions. For hairy particles initially dispersed in oil, W/O emulsions were always obtained with collapsed PEG chains and mobile PS chains at the grafted layer. However, initially dispersing the hairy particles in water resulted in O/W emulsions with collapsed PS chains and mobile PEG chains. When a good solvent for both PS and PEG blocks such as toluene was used, W/O emulsions were always obtained no matter where the hairy particles were dispersed. The wettability of the mixed polymer brush-coated silica particles can also be tuned by host-guest complexation between PEG block and α-CD. More importantly, our result showed that surprisingly the resultant mixed brush-coated hairy nanoparticles can be employed for the one-step production of O/W/O multiple emulsions that are not attainable from conventional Pickering emulsifiers. The functionalized hairy silica nanoparticles at the oil-water interface can be further linked together utilizing poly(acrylic acid) as the reversible linker to form supramolecular colloidosomes, which show pH-dependent release of cargo.

Rational controlled morphological transitions in the self-assembled multi-headed giant surfactants in solution

A series of PS-POSS based giant surfactants can self-assemble into vesicles, cylindrical and spherical micelles in solution controlled by the different number and topology of POSS groups.

Fluorescent core–shell nanoparticles and nanocapsules using comb-like macromolecular RAFT agents: synthesis and functionalization thereof

Ultra-bright fluorescent nanoparticles with comb-like shells based on PEG and acrylic acid were obtained in water using an additive-free miniemulsion polymerization process.

A reversible pH-modified fluorescence transition in block copolymer micelles enwrapped with a zinc(ii) fluorescent complex

pH-Modified luminescent micelles and films were prepared and show a reversible green and blue luminescent response to acidic and alkaline atmospheres, respectively.

Self-assembly concepts for multicompartment nanostructures

Compartmentalization is ubiquitous to many biological and artificial systems, be it for the separate storage of incompatible matter or to isolate transport processes. Advancements in the synthesis of sequential block copolymers offer a variety of tools to replicate natural design principles with tailor-made soft matter for the precise spatial separation of functionalities on multiple length scales. Here, we review recent trends in the self-assembly of amphiphilic block copolymers to multicompartment nanostructures (MCNs) under (semi-)dilute conditions, with special emphasis on ABC triblock terpolymers. The intrinsic immiscibility of connected blocks induces short-range repulsion into discrete nano-domains stabilized by a third, soluble block or molecular additive. Polymer blocks can be synthesized from an arsenal of functional monomers directing self-assembly through packing frustration or response to various fields. The mobility in solution further allows the manipulation of self-assembly processes into specific directions by clever choice of environmental conditions. This review focuses on practical concepts that direct self-assembly into predictable nanostructures, while narrowing particle dispersity with respect to size, shape and internal morphology. The growing understanding of underlying self-assembly mechanisms expands the number of experimental concepts providing the means to target and manipulate progressively complex superstructures.

Rayleigh Instability Induced Cylinder-to-Sphere Transition in Block Copolymer Micelles: Direct Visualization of the Kinetic Pathway

Direct visualization of morphological evolution remains extremely challenging despite its critical importance to understand the basic fundamentals behind the transition. Here we report on the detailed observation of a spontaneous cylinder-to-sphere morphological transformation of amphiphilic poly(2-vinylpyridine)-b-poly(ethylene oxide) (P2VP-b-PEO) diblock copolymer micelles in aqueous solution, which first provides experimental evidence that the fragmentation pathway is driven by Rayleigh instability showing the distinctive signatures during the transition. Owing to the instability of cylindrical micelles and the fluidity of micellar cores, our results show that the cylindrical micelles spontaneously undulate and transform into spherical micelles through distinct intermediate states, including undulated cylinders and pearl-necklace-like micelles with a perfect sinusoidal wave throughout the length. Moreover, the present system with transitional morphology is proved to be able to act as a model to encapsulate hydrophobic guests in the micellar cores, which displays a relatively sustained release behavior. The specific kinetic pathway provides new insight into the mechanism of block copolymer micellar morphological transition; meanwhile, the dynamic system might serve as a promising candidate for unique nanostructure design as well as contribute to the transition-coupled guest delivery and controlled release.

Polymer Complexation by Hydrogen Bonding at the Interface

Polymer complexes can form in the bulk and at interfaces. Polymer complex formation in the bulk has been studied for a long time. The recently developed layer-by-layer assembly technique well realizes polymer complexation at interfaces. The layer-by-layer assembly of polymers based on Coulomb forces or hydrogen bonding is a repeated complexation process conducted at a surface. This paper reviews both single (once only) and repeatable interfacial complexation by hydrogen bonding, the available hydrogen bonding pairs for complexation, the thermodynamics and kinetics of complexation, and construction schemes.

Thermo, pH and reduction responsive coaggregates comprising AB2C2 star terpolymers for multi-triggered release of doxorubicin

Novel disulfide-linked PEG(PCL)₂(PNIPAM)₂ and PEG(PCL)₂(PAA)₂ star terpolymers were synthesized and coassembled into mixed micelles or vesicles for multi-triggered drug release.

Effect of selective solvent on the aggregate behavior of the mixed Langmuir monolayers of PS-b-PEO and PS-b-PMMA

An interesting way to control morphology evolution in the mixed LB films was performed by mainly using a selective spreading solvent. Furthermore, a peculiar hysteresis phenomenon in the polymeric Langmuir monolayers is reported.

Synthesis of poly(acrylic acid) (PAA) modified Pluronic P123 copolymers for pH-stimulated release of doxorubicin

Pluronic P123 was chain-extended at their terminal groups using atom transfer radical polymerization to form poly(acrylic acid) (PAA) tails and obtain the PAA-b-P123-b-PAA (P123-PAA) copolymer. The incorporation of PAA had the effect of increasing the carrier's drug loading capacity of an anti-cancer drug, Doxorubicin (DOX), and also allowed for pH-controlled release of the drug. Drug release assays showed that up to 60% of DOX cargo could be retained in the DOX/P123-PAA complex for 3 days at normal physiological pH (7.4). This was then followed by a secondary burst release of DOX when the environment became more acidic (pH 5). Therefore, it was possible that the more acidic physiological environment of tumor sites could be used to trigger an accelerated release of DOX from the drug carriers. The material was demonstrated for potential application in the delivery of cationic drugs for cancer treatment.