Mechanism of Cyclic Ester Polymerization Initiated with Tin(II) Octoate. 2. Macromolecules Fitted with Tin(II) Alkoxide Species Observed Directly in MALDI−TOF Spectra

Comparison of three elements (In, Sn, and Sb) in the same period as catalysts in the ring-opening polymerization of l-lactide: from amorphous to semicrystalline polyesters

The ring-opening polymerization (ROP) of l-lactide (l-LA) is the main method for synthesizing poly(l-lactide) (PLLA), in which choosing the catalyst is one of the most important parameters. In this work, we focused on the systematic study of catalysts based on p-block elements from period 5, such as indium(iii), tin(ii), tin(iv) and antimony(iii) acetates, which displayed contrasting performances influenced by the oxidation state of the metal center. Analysis of the obtained oligomers by different techniques, including nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), polarized optical microscopy (POM) and matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF), revealed the selectivity of each catalyst toward the ROP of l-LA. Tin(ii) acetate showed the best performance, making it the best catalyst of this series for synthesizing PLLA. Indium(iii) and tin(ii) acetates induced an amorphous and semicrystalline polyester, respectively. The kinetic study evidenced the excellent performance of tin(ii) acetate in the ROP of l-LA. This catalyst reached high conversions in a quarter of the total reaction time, positioning it as the most catalytically active of the selected p-block acetate catalysts. Finally, the coordination-insertion mechanism by the catalyst in the initiation step was corroborated through the development of a mechanistic study applying the density functional theory (DFT).

Dynamic Aliphatic Polyester Elastomers Crosslinked with Aliphatic Dianhydrides

Chemically crosslinked elastomers are a class of polymeric materials with properties that render them useful as adhesives, sealants, and in other engineering applications. Poly(γ-methyl-ε-caprolactone) (PγMCL) is a hydrolytically degradable and compostable aliphatic polyester that can be biosourced and exhibits competitive mechanical properties to traditional elastomers when chemically crosslinked. A typical limitation of chemically crosslinked elastomers is that they cannot be reprocessed; however, the incorporation of dynamic covalent bonds can allow for bonds to reversibly break and reform under an external stimulus, usually heat. In this work, we study the dynamic behavior and mechanical properties of PγMCL elastomers synthesized from aliphatic dianhydride crosslinkers. The crosslinked elastomers in this work were synthesized using the commercially available crosslinkers, 1,2,4,5-cyclohexanetetracarboxylic dianhydride, and 1,2,3,4-cyclobutanetetracarboxylic dianhydride and three-arm hydroxy-telechelic PγMCL star polymers. Stress relaxation experiments on the crosslinked networks showed an Arrhenius dependence of viscosity with temperature with an activation energy of 118 ± 8 kJ/mol, which agrees well with the activation energy of transesterification exchange chemistry obtained from small molecule model studies. Dynamic mechanical thermal analysis and rheological experiments confirmed the dynamic nature of the networks and provided insight into the mechanism of exchange (i.e., associative or dissociative). Tensile testing showed that these materials can exhibit high strains at break and low Young's moduli, characteristic of soft and strong elastomers. By controlling the exchange chemistry and understanding the effect of macromolecular structure on mechanical properties, we prepared the high-performance elastomers that can be potentially reprocessed at moderately elevated temperatures.

Organocatalyzed ring-opening reactions of γ-carbonyl-substituted ε-caprolactones

Side-chain-functionalized aliphatic polyesters are promising as functional biodegradable polymers. We have investigated ring-opening reactions of γ-carbonyl-substituted ε-caprolactones (gCCLs) to obtain poly(ε-caprolactone) (PCL) analogues. Organic catalysts and Sn(Oct)2 often used for the ring-opening polymerization (ROP) of ε-caprolactone (CL) have been explored to find the conditions for the formation of polymeric products of gCCLs. We confirmed the consumption of gCCLs in all catalyzed reactions. However, chain propagation hardly occurs, as the propagating species are preferentially transformed to α-substituted five-membered lactones when the substituents are linked by ester or not sterically hindered. Intramolecular cyclization to form thermodynamically stable five-membered lactones releases alcohols and amines, serving as nucleophiles for the subsequent ring opening of other gCCLs. Thus, apparent chain reactions are realized for continuous consumption of gCCLs. The reaction preference remains unchanged independent of the catalysts, although the reactions of the amide-linked gCCLs by acidic catalysts are slightly mitigated. Finally, copolymerization of CL and a gCCL catalyzed by diphenyl phosphate has been investigated, which enables the chain propagation reaction to yield the linear oligomers of PCL analogues containing up to 16 mol% of gCCL units. This study contributes to understanding the chemistry of ring-opening reactions of substituted lactones for designing functional degradable polymers.

Chemical Recycling of Commercial Poly(l-lactic acid) to l-Lactide Using a High-Performance Sn(II)/Alcohol Catalyst System

Poly(l-lactic acid) (PLLA) is a leading commercial polymer produced from biomass, showing useful properties for plastics and fiber applications; after use, it is compostable. One area for improvement is postconsumer waste PLLA chemical recycling to monomer (CRM), i.e., the formation of l-lactide (l-LA) from waste plastic. This process is currently feasible at high reaction temperatures and shows low catalytic activity accompanied, in some cases, by side reactions, including epimerization. Here, a commercial Sn(II) catalyst, applied with nonvolatile commercial alcohol, enables highly efficient CRM of PLLA to yield l-LA in excellent yield and purity (92% yield, >99% l-LA from theoretical max.). The depolymerization is performed using neat polymer films at low temperatures (160 °C) under a nitrogen flow or vacuum. The chemical recycling operates with outstanding activity, achieving turnover frequencies which are up to 3000× higher than previously excellent catalysts and applied at loadings up to 6000× lower than previously leading catalysts. The catalyst system achieves a TOF = 3000 h-1 at 0.01 mol % or 1:10,000 catalyst:PLLA loading. The depolymerization of waste PLLA plastic packaging (coffee cup lids) produces pure l-LA in excellent yield and selectivity. The new catalyst system (Sn + alcohol) can itself be recycled four times in different PLLA "batch degradations" and maintains its high catalytic productivity, activity, and selectivity.

pH Effect on Particle Aggregation of Vanillin End-Capped Polylactides Bearing a Hydrophilic Group Connected by a Cyclic Acetal Moiety

To enhance the pH-responsiveness of poly(lactic acid) (PLA) particles, desired vanillin acetal-based initiators were synthesized and functional PLA was initiated at the chain end. PLLA-V6-OEG₃ particles were prepared using polymers with various M_n values of 2400-4800 g/mol. PLLA-V6-OEG₃ was appropriated to achieve a pH-responsive behavior under physiological conditions within 3 min via the six-membered ring diol-ketone acetal. Moreover, it was found that the polymer chain length (M_n) influenced the aggregation rate. TiO₂ was selected as the blending agent to improve the aggregation rate. The PLLA-V6-OEG₃ blended with TiO₂ was found to accelerate the aggregation rate compared with that without TiO₂, and the best ratio of polymer/TiO₂ was 1:1. To study the effect of the chain end for stereocomplex polylactide (SC-PLA) particles, PLLA-V6-OEG₄ and PDLA-V6-OEG₄ were successfully synthesized. The obtained results of SC-PLA particle aggregation implied that the types of chain end and the molecular weight of polymer could influence the aggregation rate. The SC-V6-OEG₄ blended with TiO₂ could not make our target to aggregate under physiological conditions within 3 min. This study motivated us to control the particle aggregation rate under physiological conditions for applying as a target drug carrier which is significantly influenced by not only the molecular weight but also the hydrophilicity of the chain-end as well as the number of acetal bonds.

Ring-opening polymerization of lactides and ε-caprolactone catalyzed by Zn(II) aryl carboxylate complexes supported by 4-pyridinyl schiff base ligands

Synthesis and catalytic studies of aryl carboxylate Zn (II) complexes is reported. Reaction of substituted (E)-N-phenyl-1-(pyridin-4-yl)methanimine with a methanolic solution of Zn(CH3COO)2 and substituted aryl carboxylate co-ligands gave heteroleptic Zn(II) complexes; [Zn(C6H5COO)2(L1)]2 (1), [Zn(C7H7COO)2(L1)]2 (2), [Zn (4-F-C6H4COO)2(L1)]2 (3), [Zn(C6H5COO)2(L2)]2 (4), [Zn(C7H7COO)2(L2)]2 (5), [Zn (4-F-C6H4COO)2(L2)]2 (6), [Zn(C6H5COO)2(L3)]2 (7), [Zn(C7H7COO)2(L3)]2 (8), [Zn (4-F-C6H4COO)2(L3)]2 (9). The molecular structures of complexes 1 and 4 are dinuclear with the zinc atom in complex 1 adopting a distorted trigonal bipyramidal geometry in a bi-metallacycle while complex 4 is square pyramidal where all four benzoate ligands bridge the zinc metals in a paddle wheel arrangement. All complexes successfully initiated mass/bulk ring-opening polymerization (ROP) of ϵ-caprolactone (ϵ-CL) and lactides (LAs) monomers with or without alcohol co-initiators at elevated temperatures. Complexes 1, 4 and 6 containing the unsubstituted benzoate co-ligands were the most active in their triad; with complex 4 being the most active (k app) of 0.3450 h-1. The physicochemical properties of the polymerization products of l-lactide and rac-lactide in toluene revealed melting temperatures (Tm) between 116.58 °C and 188.03 °C, and decomposition temperatures between 278.78 °C and 331.32 °C suggestive of an isotactic PLA with a metal capped end.

Syntheses of polylactides by means of tin catalysts

Reaction mechanisms and synthetic methods used for the preparation of homo- and copolylactides based on tin(ii) and tin(iv) catalysts are reviewed.

Organocatalytic Ring-Opening Polymerization of ε-Caprolactone Using bis(N-(N'-butylimidazolium)alkane Dicationic Ionic Liquids as the Metal-Free Catalysts: Polymer Synthesis, Kinetics and DFT Mechanistic Study

In this work, we successfully synthesized high thermal stable 1,n-bis(N-(N′-butylimidazolium)alkane bishexafluorophosphates (1,n-bis[Bim][PF₆], n = 4, 6, 8, and 10) catalysts in 55–70% yields from imidazole which were applied as non-toxic DILs catalysts with 1-butanol as initiator for the bulk ROP of ε-caprolactone (CL) in the varied ratio of CL/nBuOH/1,4-bis[Bim][PF₆] from 200/1.0/0.25–4.0 to 700/1.0/0.25–4.0 by mol%. The result found that the optimal ratio of CL/nBuOH/1,4-bis[Bim][PF₆] 400/1.0/0.5 mol% at 120 °C for 72 h led to the polymerization conversions higher than 95%, with the molecular weight (M_w) of PCL 20,130 g mol⁻¹ (Đ~1.80). The polymerization rate of CL increased with the decreasing linker chain length of ionic liquids. Moreover, the mechanistic study was investigated by DFT using B3LYP (6–31G(d,p)) as basis set. The most plausible mechanism included the stepwise and coordination insertion in which the alkoxide insertion step is the rate-determining step.

Ring-opening polymerization of ε-caprolactone initiated by tin(II) octoate/n-hexanol: DSC isoconversional kinetics analysis and polymer synthesis

The kinetics of ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) initiated by 1.0, 1.5 and 2.0 mol% of stannous(II) octoate/n-hexanol (Sn(Oct)₂/n-HexOH) wase successfully studied by non-isothermal differential scanning calorimetry (DSC) at heating rates of 5, 10, 15 and 20 °C/min. The DSC polymerization kinetic parameters of ε-CL were calculated using differential (Friedman) and integral isoconversional methods (Kissinger-Akahira-Sunose, KAS). The average activation energy (E_a ) values obtained from Friedman and KAS methods were in the range of 64.9-70.5 kJ/mol and 64.9-80.4 kJ/mol, respectively. The values of frequency factor (A) were determined from model fitting method using Avrami-Erofeev reaction model. The average values of A for the ROP of ε-CL initiated by 1.0, 1.5 and 2.0 mol% of Sn(Oct)₂/n-HexOH (1:2) were 7.3x10⁷, 2.8x10⁶ and 1.2x10⁶ min^-1, respectively. From kinetics studied, the polymerization rate of ε-CL increased with increasing initiator concentration. The performance of Sn(Oct)₂/n-HexOH in the synthesis of poly(ε-caprolactone) (PCL) was investigated by bulk polymerization at temperatures of 140, 160 and 180 °C. Sn(Oct)₂/n-HexOH (1:2) could produce high number average molecular weight ( M n ‾ = 9.0 × 10⁴ g/mol) and %yield (89%) of PCL in a short period of time at Sn(Oct)₂ concentration of 0.1 mol% and temperature of 160°C. The mechanism of the ROP of ε-CL with Sn(Oct)₂/n-HexOH was proposed through the coordination-insertion mechanism.

Robust Guanidine Metal Catalysts for the Ring-Opening Polymerization of Lactide under Industrially Relevant Conditions

The increasing awareness of sustainability has led to enormous growth of the demand for bio-based and biodegradable polymers such as poly(lactide) (PLA). In industry, polymerization of lactide is currently carried out using tin catalysts (e. g., tin(II) ethyl hexanoate, Sn(Oct)₂ ). Since the catalyst remains in the polymer, it can accumulate in the soil or in the human body after degradation and cause damage due to its toxicity. Therefore, a search for a suitable substitute for this catalyst has been going on for decades. Guanidine metal complexes prove to be excellent catalysts in the polymerization of lactide. They are not only convincing because of their activity and the synthesis of high molar mass polymers, but also show a high robustness against high temperatures, oxidation as well as residual protic impurities in the monomer. Herein, key zinc and iron guanidine complexes are discussed with respect to their apparent rate constant (k_app ) and rate constant of propagation (k_p ), produced molar masses and the mechanism involved.

Synthesis and synthetic mechanism of Polylactic acid

At present, Polylactic acid (PLA) is one of the most used biodegradable polyesters. The good properties and its biodegradability make that PLA can replace the fossil fuel derived polymers in different applications. PLA can be synthesized by using different methodologies. Among them, the most widely used forms on an industrial scale are the direct polycondensation of Lactic acid and the ring-opening polymerization of cyclic Lactide. The final properties of the obtained PLA are dependent on the used stereoisomers of the raw materials (Lactic acid and/or Lactide) and the conditions employed to polymerize them. Therefore, the comprehension of the synthetic mechanism of PLA is crucial to control the stereoregularity of PLA, which in turn results in an improvement of the polymer properties. So, distinct mechanisms for the synthesis of PLA by ring-opening polymerization using different catalysts systems (organometallic catalysts, cationic catalyst, organic catalyst, bifunctional catalysts) are examined in this review.

Ionic liquid-functionalized LDH as catalytic-initiating nanoparticles for microwave-activated ring opening polymerization of ε-caprolactone

Layered double hydroxides with ionic liquid as highly active catalytic-initiating system for microwave-assisted ring opening polymerization of ε-caprolactone.

Amides as Non-polymerizable Catalytic Adjuncts Enable the Ring-Opening Polymerization of Lactide With Ferrous Acetate Under Mild Conditions

Sn-based catalysts are effective in the ring-opening polymerization (ROP) but are toxic. Fe(OAc)₂ used as an alternative catalyst is suitable for the ROP of lactide only at higher temperatures (>170°C), associated with racemization. In the ROP of ester and amide group containing morpholinediones with Fe(OAc)₂ to polydepsipeptides at 135°C, ester bonds were selectively opened. Here, it was hypothesized that ROP of lactones is possible with Fe(OAc)₂ when amides are present in the reactions mixture as Fe-ligands could increase the solubility and activity of the metal catalytic center. The ROP of lactide in the melt with Fe(OAc)₂ is possible at temperatures as low as 105°C, in the presence of N-ethylacetamide or N-methylbenzamide as non-polymerizable catalytic adjuncts (NPCA), with high conversion (up to 99 mol%) and yield (up to 88 mol%). Polydispersities of polylactide decreased with decreasing reaction temperature to ≤ 1.1. NMR as well as polarimetric studies showed that no racemization occurred at reaction temperatures ≤145°C. A kinetic study demonstrated a living chain-growth mechanism. MALDI analysis revealed that no side reactions (e.g., cyclization) occurred, though transesterification took place.

Investigating the structural chemistry of organotin(IV) compounds: recent advances

Organotin(IV) compounds have been considered for their outstanding industrial, medical and specific applications in the synthesis of various types of chemical compounds. In this review, we have focused on the structural chemistry of organotin(IV) compounds, including coordination chemistry, the effect of structure on reactions, bond formations from the perspective of structure and investigation of the structure of organotin(IV) compounds in different phases. The structural chemistry of organotin(IV) compounds is subject to interest due to their major impact on predicting the properties and drumming up support for pushing back the frontiers of synthesis of organotin(IV) compounds with advanced properties.

Dialkylaluminum 2-substituted 6,6-dimethylcyclopentylpyridin-7-oxylates toward structural-differentiation of the ring-opening polymerization of ε-caprolactone and l-lactides

Herein, a series of dialkylaluminum 2-substituted 6,6-dimethylcyclopentyl pyridin-7-oxylates Al1-Al7 were synthesized and characterized by 1H- and 13C-NMR spectroscopy and elemental analysis. The molecular structure of Al3 was proven to be a dimer of an aluminum complex. These aluminum complexes could efficiently initiate the ring-opening polymerization (ROP) of ε-caprolactone (CL), and the structural differentiations of the resultant PCL were strongly dependent on the amount of BnOH (PhCH2OH) used. In the absence of BnOH, the resultant PCL showed a cyclic structure, whereas BnO-capped linear PCL was obtained in the presence of >2.0 equivalents of BnOH; the resultant PCL was a mixture of linear and cyclic PCLs in the presence of 1.0 equivalent of BnOH. Moreover, these aluminum complexes exhibited high efficiency towards the ROP of l-lactide (LLA); however, the activities were lower than those for the ROP of ε-CL. Without BnOH, the resultant PLLA showed a highly linear structure with the alkyl-end group from aluminum complexes; on the other hand, PLLA displayed a major cyclic structure and minor BnO-capped linear PLLA if 1.0 equivalent of BnOH was employed, and the percentage of BnO-capped linear PLLA was increased by increasing the amount of BnOH.

Synthesis of biodegradable and biorenewable polylactides initiated by aluminum complexes bearing m-xylylenediamine derivatives via the ring-opening polymerization of lactides

Aluminum complexes derived from m-xylylenediamine were synthesized and investigated as initiators for l-lactide and rac-lactide polymerization.

Organotin-bridged ionic liquid as a solvent-free, leaching-resistive catalyst for ring opening polymerization of ε-caprolactone

An easy synthesis provides a monoalkyltin trichloride grafted onto an ionic liquid. The catalyst paves the way to nontoxic biologically relevant materials.

Heterogeneous catalysts based on built-in N-heterocyclic carbenes with high removability, recoverability and reusability for ring-opening polymerization of cyclic esters

Both activity and reusability are critical issues for developing new generation metal-free catalytic systems.

Alkali metal complex-mediated ring-opening polymerization of rac-LA, ε-caprolactone, and δ-valerolactone

Catalytic ring opening polymerization (ROP) of rac-lactide, ε-caprolactone, and δ-valerolactone using alkali metal (Li, Na, K) complexes as competent catalysts are reported.

Living Ring-Opening Polymerization of O-Carboxyanhydrides: The Search for Catalysts

Biodegradable poly(α-hydroxy acids) can be synthesized by means of ring-opening polymerization (ROP) of O-carboxyanhydrides (OCAs). Numerous catalysts have been developed to control the living polymerization of OCAs. Here we review the rationale for the use of OCA, the desirable features for and important attributes of catalysts for the ROP of OCAs, and specific examples that have been developed.

Bulk Modification of Poly(lactide) (PLA) via Copolymerization with Poly(propylene glycol) Diglycidylether (PPGDGE)

Copolymers of l-lactide and poly(propylene glycol) diglycidyl ether (PPGDGE₃₈₀) were synthesized by ring opening polymerization (ROP). Stannous octoate was used as the catalyst and 1-dodecanol as the initiator. The effect of the variables on the thermal properties of the copolymers was investigated by differential scanning calorimetry (DSC). Contact angle measurements were made in order to study the wettability of the synthesized copolymers. The copolymers differed widely in their physical characteristics, ranging from weak elastomers to tougher thermoplastics, according to the ratio of l-lactide and PPGDGE₃₈₀. The results showed that the copolymers were more hydrophilic than neat Poly(lactide) (PLA) and the monomer ratio had a strong influence on the hydrophilic properties.

Biocompatible Nanobioglass Reinforced Poly(ε-Caprolactone) Composites Synthesized via In Situ Ring Opening Polymerization

Poly(ε-caprolactone) (PCL) is a bioresorbable synthetic polyester widely studied as a biomaterial for tissue engineering and controlled release applications, but its low bioactivity and weak mechanical performance limits its applications. In this work, nanosized bioglasses with two different compositions (SiO₂–CaO and SiO₂–CaO–P₂O₅) were synthesized with a hydrothermal method, and each one was used as filler in the preparation of PCL nanocomposites via the in situ ring opening polymerization of ε-caprolactone. The effect of the addition of 0.5, 1 and 2.5 wt % of the nanofillers on the molecular weight, structural, mechanical and thermal properties of the polymer nanocomposites, as well as on their enzymatic hydrolysis rate, bioactivity and biocompatibility was systematically investigated. All nanocomposites exhibited higher molecular weight values in comparison with neat PCL, and mechanical properties were enhanced for the 0.5 and 1 wt % filler content, which was attributed to extensive interactions between the filler and the matrix, proving the superiority of in situ polymerization over solution mixing and melt compounding. Both bioglasses accelerated the enzymatic degradation of PCL and induced bioactivity, since apatite was formed on the surface of the nanocomposites after soaking in simulated body fluid. Finally, all samples were biocompatible as Wharton jelly-derived mesenchymal stem cells (WJ-MSCs) attached and proliferated on their surfaces.

Metallic organophosphate catalyzed bulk ring-opening polymerization

Metallic organophosphates have catalyzed the bulk ring-opening polymerization of cyclic esters and cyclic carbonates through a bifunctional mode.

Catalytic Hydroxylation of Polyethylenes

Polyolefins account for 60% of global plastic consumption, but many potential applications of polyolefins require that their properties, such as compatibility with polar polymers, adhesion, gas permeability, and surface wetting, be improved. A strategy to overcome these deficiencies would involve the introduction of polar functionalities onto the polymer chain. Here, we describe the Ni-catalyzed hydroxylation of polyethylenes (LDPE, HDPE, and LLDPE) in the presence of ^m CPBA as an oxidant. Studies with cycloalkanes and pure, long-chain alkanes were conducted to assess precisely the selectivity of the reaction and the degree to which potential C-C bond cleavage of a radical intermediate occurs. Among the nickel catalysts we tested, [Ni(Me₄Phen)₃](BPh₄)₂ (Me₄Phen = 3,4,7,8,-tetramethyl-1,10-phenanthroline) reacted with the highest turnover number (TON) for hydroxylation of cyclohexane and the highest selectivity for the formation of cyclohexanol over cyclohexanone (TON, 5560; cyclohexanol/(cyclohexanone + ε-caprolactone) ratio, 10.5). The oxidation of n-octadecane occurred at the secondary C-H bonds with 15.5:1 selectivity for formation of an alcohol over a ketone and 660 TON. Consistent with these data, the hydroxylation of various polyethylene materials by the combination of [Ni(Me₄Phen)₃](BPh₄)₂ and ^m CPBA led to the introduction of 2.0 to 5.5 functional groups (alcohol, ketone, alkyl chloride) per 100 monomer units with up to 88% selectivity for formation of alcohols over ketones or chloride. In contrast to more classical radical functionalizations of polyethylene, this catalytic process occurred without significant modification of the molecular weight of the polymer that would result from chain cleavage or cross-linking. Thus, the resulting materials are new compositions in which hydroxyl groups are located along the main chain of commercial, high molecular weight LDPE, HDPE, and LLDPE materials. These hydroxylated polyethylenes have improved wetting properties and serve as macroinitiators to synthesize graft polycaprolactones that compatibilize polyethylene-polycaprolactone blends.