Anomalous role change of tertiary amino and ester groups as hydrogen acceptors in eudragit E based solid dispersion depending on the concentration of naproxen

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

Advances in the development of amorphous solid dispersions: The role of polymeric carriers

Amorphous solid dispersion (ASD) is one of the most effective approaches for delivering poorly soluble drugs. In ASDs, polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level. To prepare the solid dispersions, there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations. Polymer selection is of great importance because it influences the stability, solubility and dissolution rates, manufacturing process, and bioavailability of the ASD. This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers, formulation designs and preparation methods. Furthermore, considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.

Formation of a Stable Co-Amorphous System for a Brick Dust Molecule by Utilizing Sodium Taurocholate with High Glass Transition Temperature

Brick dust molecules are usually poorly soluble in water and lipoidal components, making it difficult to formulate them in dosage forms that provide efficient pharmacological effects. A co-amorphous system is an effective strategy to resolve these issues. However, their glass transition temperatures (Tg) are relatively lower than those of polymeric amorphous solid dispersions, suggesting the instability of the co-amorphous system. This study aimed to formulate a stable co-amorphous system for brick dust molecules by utilizing sodium taurocholate (NaTC) with a higher Tg. A novel neuropeptide Y5 receptor antagonist (AntiY5R) and NaTC with Tg of 155 °C were used as the brick dust model and coformer, respectively. Ball milling formed a co-amorphous system for AntiY5R and NaTC (AntiY5R-NaTC) at various molar ratios. Deviation from the theoretical Tg value and peak shifts in Fourier-transform infrared spectroscopy indicated intermolecular interactions between AntiY5R and NaTC. AntiY5R-NaTC at equal molar ratios resulting in an 8.5-fold increase in AntiY5R solubility over its crystalline form. The co-amorphous system remained amorphous for 1 month at 25 °C and 40 °C. These results suggest that the co-amorphous system formed by utilizing NaTC as a coformer could stably maintain the amorphous state and enhance the solubility of brick dust molecules.

Microfluidic Particle Engineering of Hydrophobic Drug with Eudragit E100─Bridging the Amorphous and Crystalline Gap

Co-processing active pharmaceutical ingredients (APIs) with excipients is a promising particle engineering technique to improve the API physical properties, which can lead to more robust downstream drug product manufacturing and improved drug product attributes. Excipients provide control over critical API attributes like particle size and solid-state outcomes. Eudragit E100 is a widely used polymeric excipient to modulate drug release. Being cationic, it is primarily employed as a precipitation inhibitor to stabilize amorphous solid dispersions. In this work, we demonstrate how co-processing of E100 with naproxen (NPX) (a model hydrophobic API) into monodisperse emulsions via droplet microfluidics followed by solidification via solvent evaporation allows the facile fabrication of compact, monodisperse, and spherical particles with an expanded range of solid-state outcomes spanning from amorphous to crystalline forms. Low E100 concentrations (≤26% w/w) yield crystalline microparticles with a stable NPX polymorph distributed uniformly across the matrix at a high drug loading (∼89% w/w). Structurally, E100 incorporation reduces the size of primary particles comprising the co-processed microparticles in comparison to neat API microparticles made using the same technique and the as-received API powder. This reduction in primary particle size translates into an increased internal porosity of the co-processed microparticles, with specific surface area and pore volume ∼9 times higher than the neat API microparticles. These E100-enabled structural modifications result in faster drug release in acidic media compared to neat API microparticles. Additionally, E100-NPX microparticles have a significantly improved flowability compared to neat API microparticles and as-received API powder. Overall, this study demonstrates a facile microfluidics-based co-processing method that broadly expands the range of solid-state outcomes obtainable with E100 as an excipient, with multiscale control over the key attributes and performance of hydrophobic API-laden microparticles.

Design of Ternary Amorphous Solid Dispersions for Enhanced Dissolution of Drug Combinations

Using sulfamethoxazole (SMZ) and trimethoprim (TMP) as model drugs, we designed amorphous solid dispersions (ASDs) for the simultaneous solubility enhancement of two active pharmaceutical ingredients (APIs) by exploiting the drug-drug and drug-polymer interactions. In order to make this approach broadly applicable and over a wide dose range, a mixture of SMZ and TMP at weight ratios of 5:1 and 1:5 (w/w) were formulated into ternary ASDs. Depending on the dose ratio of the two drugs, the polymer used was either an aminoalkyl methacrylate copolymer (Eudragit, EDE) or polyacrylic acid. The drug-drug and drug-polymer interactions were characterized to be ionic by infrared and solid-state nuclear magnetic resonance spectroscopy. The interactions resulted in a substantial reduction in molecular mobility, evident from the increase in the structural relaxation time determined by dielectric spectroscopy. The drug-drug interaction resulted in ∼3 orders of magnitude reduction in molecular mobility. The addition of a polymer led to a further decrease in molecular mobility of up to 4 orders of magnitude. The strength of intermolecular interactions was also estimated from the glass transition temperatures of the ASDs obtained by differential scanning calorimetry. The strong intermolecular interactions yielded highly stable ASDs with no evidence of crystallization, both at elevated temperatures and under accelerated storage conditions (40 °C/75% relative humidity; 6 weeks). The dissolution performances of the ASDs were evaluated using the area under the curve (AUC) obtained from the concentration-time profiles under the non-sink condition. SMZ and TMP in their ternary ASDs, when compared with their crystalline counterparts, exhibited up to 6.4- and 4.6-fold increases in AUC, respectively. Importantly, the synchronized release of the two drugs was observed, a desirable attribute in synergistic formulations. A single-phase ternary ASD, stabilized by drug-drug and drug-polymer interactions, is likely responsible for the unique release profile.

Effect of Chemical Penetration Enhancer-Adhesive Interaction on Drug Release from Transdermal Patch: Mechanism Study Based on FT-IR Spectroscopy, 13C NMR Spectroscopy, and Molecular Simulation

Chemical penetration enhancers (CPEs) are commonly added into transdermal patches to impart improved skin permeation of drug. However, significant unexplained variability in drug release kinetics in transdermal patches is possible as a result of the addition of CPEs; investigations into the underlying mechanisms are still limited. In the present study, a diverse set of CPEs was employed to draw broad conclusions. Solubility parameters of CPEs and acrylate pressure-sensitive adhesive were calculated by molecular dynamics simulation and Fedors group contribution method to evaluate drug-adhesive miscibility. CPE-adhesive interaction was characterized by FT-IR study, ¹³C NMR spectroscopy, and molecular docking simulation. Results showed that release enhancement ratio (ER_R) of CPEs for zolmitriptan was rank ordered as isopropyl myristate > azone > Plurol Oleique^® CC497 > Span^® 80 > N-methylpyrrolidone > Transcutol^® P. It was found that solubility parameter difference (Δδ) between CPE and adhesive was negatively related with ER_R. It was proved that hydrogen bonding between CPE and adhesive would increase drug release rate, but only if the CPE showed good miscibility with adhesive. CPE like isopropyl myristate, which had good miscibility with adhesive, could decrease drug-adhesive interaction leading to the release of drug from adhesive.

Applicability of an Experimental Grade of Hydroxypropyl Methylcellulose Acetate Succinate as a Carrier for Formation of Solid Dispersion with Indomethacin

The transformation of a crystalline drug into an amorphous form is a promising way to enhance the oral bioavailability of poorly water-soluble drugs. Blending of a carrier, such as a hydrophilic polymer, with an amorphous drug is a widely used method to produce a solid dispersion and inhibit crystallization. This study investigates an experimental grade of hydroxypropyl methylcellulose acetate succinate, HPMCAS-MX (MX), as a solid dispersion carrier. Enhancement of thermal stability and reduction of the glass transition temperature (Tg) of MX compared with those of the conventional grade were evaluated through thermogravimetric analysis and differential scanning calorimetry (DSC). The formation of a homogeneous amorphous solid dispersion between MX and indomethacin was confirmed by X-ray powder diffraction analysis, DSC, and Raman mapping. It was observed that 10–30% MX did not act as an anti-plasticizer, but the utilization of >40% MX caused an increase in Tg and reduction of molecular mobility. This could be explained by a change in intermolecular interactions, inferred from infrared spectroscopy combined with principal component analysis. HPMCAS-MX exhibited similar performance to that of conventional-grade, HPMCAS-MG. Although HPMCAS-MX has thermal properties different from those of conventional-grade HPMCAS-MG, it retains its ability as a solid dispersion carrier.

The design and development of high drug loading amorphous solid dispersion for hot-melt extrusion platform

Amorphous solid dispersion (ASD) is a formulation strategy extensively used to enhance the bioavailability of poorly water soluble drugs. Despite this, they are limited by various factors such as limited drug loading, poor stability, drug-excipient miscibility and the choice of process platforms. In this work, we have developed a strategy for the manufacture of high drug loaded ASD (HDASD) using hot-melt extrusion (HME) based platform. Three drug-polymer combinations, indomethacin-Eudragit®E, naproxen-Eudragit®E and ibuprofen-Eudragit®E, were used as the model systems. The design spaces were predicted through Flory-Huggins based theory, and the selected HDASDs at pre-defined conditions were manufactured using HME and quench-cooled melt methods. These HDASD systems were also extensively characterised via small angle/wide angle x-ray scattering, differential scanning calorimetry, Infrared and Raman spectroscopy and atomic force microscopy. It was verified that HDASDs were successfully produced via HME platform at the pre-defined conditions, with maximum drug loadings of 0.65, 0.70 and 0.60 w/w for drug indomethacin, ibuprofen and naproxen respectively. Enhanced physical stability was further confirmed by high humidity (95%RH) storage stability studies. Through this work, we have demonstrated that by the implementation of predictive thermodynamic modelling, HDASD formulation design can be integrated into the HME process design to ensure the desired quality of the final dosage form.

Quantum dots encapsulated with curcumin inhibit the growth of colon cancer, breast cancer and bacterial cells

Aim: To synthesize and examine the impact of free Eudragit^® RS 100 nanoparticles (LN01), Quantum dots curcumin-loaded Eudragit RS 100 nanoparticles (LN04), and un-encapsulated curcumin nanoparticles (LN06) on cancerous and bacterial cells. Materials & methods: The LN01, LN04, LN06 were synthesized and characterized by Fourier transform infrared, ζ potential, UV-Vis spectroscopy, transmission electron microscopy and scanning electron microscopy and their biological activities were evaluated. Results: LN04 profoundly inhibited the growth of colon (HCT-116) cancerous cells (10.64% cell viability) and breast cancer (MCF-7) cells (10.32% cell viability) with compared to LN01 and LN06. Normal cells (HEK-293) did not show any inhibition after treatments. In addition, LN04 show better inhibitory action on bacterial growth compared with LN01 and LN06. Conclusion: We suggest that LN04 selectively target cancerous and bacterial cells and therefore possess potential anticancer and antibacterial capabilities.

Intermolecular Interactions between Drugs and Aminoalkyl Methacrylate Copolymer in Solution to Enhance the Concentration of Poorly Water-Soluble Drugs

An aminoalkyl methacrylate copolymer, Eudragit^® E (EUD-E), has gained tremendous attention as a solid dispersion carrier because it efficiently stabilizes drugs in the amorphous state. Furthermore, EUD-E remarkably enhances drug dissolution in water. This review focuses on the interaction between drugs and EUD-E in solution, which contributes to the enhancement of drug concentration. Studies examining interactions between acidic drugs and EUD-E in organic solvents have revealed that the interaction occurs predominantly by electrostatic interaction, including hydrogen bonding and dipolar interactions. Other studies on interactions in aqueous solution found evidence for strong electrostatic interactions between acidic drugs and EUD-E in ion exchange experiments. ¹H-NMR studies using high-resolution magic-angle spinning, nuclear Overhauser effect spectroscopy, diffusion, and relaxation time measurements successfully identified the interaction site and strength in aqueous solution. Hydrophobic and ionic interactions occurred between drugs and EUD-E. The conformation of EUD-E, which was affected by the ionic strength and pH of the aqueous media, also influenced the interaction. The knowledge discussed in this review will be helpful in designing solid dispersion formulations with EUD-E, which will efficiently enhance drug concentration and subsequent absorption into the body.

The Investigation of Flory-Huggins Interaction Parameters for Amorphous Solid Dispersion Across the Entire Temperature and Composition Range

Amorphous solid dispersion (ASD) is one of the most promising enabling formulations featuring significant water solubility and bioavailability enhancements for biopharmaceutical classification system (BCS) class II and IV drugs. An accurate thermodynamic understanding of the ASD should be established for the ease of development of stable formulation with desired product performances. In this study, we report a first experimental approach combined with classic Flory–Huggins (F–H) modelling to understand the performances of ASD across the entire temperature and drug composition range. At low temperature and drug loading, water (moisture) was induced into the system to increase the mobility and accelerate the amorphous drug-amorphous polymer phase separation (AAPS). The binodal line indicating the boundary between one phase and AAPS of felodipine, PVPK15 and water ternary system was successfully measured, and the corresponding F–H interaction parameters (χ) for FD-PVPK15 binary system were derived. By combining dissolution/melting depression with AAPS approach, the relationship between temperature and drug loading with χ (Φ, T) for FD-PVPK15 system was modelled across the entire range as χ = 1.72 − 852/T + 5.17·Φ − 7.85·Φ². This empirical equation can provide better understanding and prediction for the miscibility and stability of drug-polymer ASD at all conditions.

Co-amorphous Formation Induced by Combination of Tranilast and Diphenhydramine Hydrochloride

In this study, we investigated the formation of a co-amorphous system of tranilast (TRL) and diphenhydramine hydrochloride (DPH), which are drugs used for treating allergies and inflammation. The crystallization from undercooled melts of the drugs and drug mixtures was evaluated by thermal analysis. Both drugs in the amorphous state underwent crystallization on heating, although the mixture remained in the amorphous state, indicating the formation of a co-amorphous system. The physicochemical properties of co-amorphous TRL-DPH prepared by the melting-cooling process were studied. The glass transition temperature of co-amorphous TRL-DPH deviated from the theoretical value. The enthalpy relaxation rate of the amorphous drugs, which reflected the molecular mobility, was reduced by the formation of a co-amorphous system. The intermolecular interactions between TRL and DPH in the co-amorphous system were measured by the change in the IR spectra. These results were consistent with the high physical stability. The co-amorphous sample remained in the amorphous state for over 30 days at 40°C, whereas the amorphous drugs showed rapid crystallization. Our findings demonstrate that TRL and DPH form a co-amorphous system, which dramatically decreases their crystallization without an excipient.

Design of acid-responsive polymeric nanoparticles for 7,3',4'-trihydroxyisoflavone topical administration

7,3',4'-Trihydroxyisoflavone (734THIF) is a secondary metabolite of daidzein and has been recently found to possess antioxidant, melanin inhibition, and skin cancer chemopreventive activities. However, the poor water solubility of 734THIF impedes its absorption and skin penetration and, therefore, limits its pharmacological effects when applied topically to the skin. We seek to use the nanoprecipitation method to prepare optimal eudragit E100 (EE)-polyvinyl alcohol (PVA)-loaded 734THIF nanoparticles (734N) to improve its physicochemical properties and thereby increase its water solubility, skin penetration, and biological activities. EE-PVA-loaded 734THIF nanoparticles (734N) were prepared, and their morphology and particle size were evaluated using a particle size analyzer and by electron microscopy. The drug loading and encapsulation efficiencies and in vitro solubility were determined using high-performance liquid chromatography. Hydrogen-bond formation was evaluated by (1)H-nuclear magnetic resonance and Fourier transform infrared spectroscopy, and crystalline-to-amorphous transformation was determined by differential scanning calorimetry and X-ray diffractometry. In vitro skin penetration was analyzed using fresh pig skin mounted on Franz diffusion cells, and cytotoxicity against human keratinocyte HaCaT cells was evaluated using the MTT assay. Antioxidant activity was determined by 2,2-diphenyl-1-picrylhydrazyl-free radical scavenging ability. EE-PVA-loaded 734THIF nanoparticles showed good drug loading and encapsulation efficiencies and were characterized by improved physicochemical properties, including reduction in particle size, amorphous transformation, and intermolecular hydrogen-bond formation. This is associated with increased water solubility and enhanced in vitro skin penetration, with no cytotoxicity toward HaCaT cells. In addition, 734THIF nanoparticles retained their antioxidant activity. In conclusion, 734THIF nanoparticles are characterized by improved physicochemical properties, increased water solubility, and enhanced skin penetration, and these may have potential use in the future as a topical delivery formulation for the treatment of skin diseases.