Importance of Critical Micellar Concentration for the Prediction of Solubility Enhancement in Biorelevant Media

Permeability of Olmesartan Medoxomil from Lipid Based and Suspension Formulations using an Optimized HDM-PAMPA Model

Hexadecane membrane-parallel artificial membrane permeability assay (HDM-PAMPA) is based on an artificial hexadecane membrane that separates the two compartments (donor and acceptor compartment). This model is used to predict the permeability of drugs in gastrointestinal tract and to simulate the passive absorption. In vivo behaviour of the drugs can be estimated with these systems in drug development studies. In our study we optimized HDM-PAMPA model to determine permeability of olmesartan medoxomil (OM) lipid based drug delivery system (OM-LBDDS). In order to prove that LBDDS formulation facilitates the weak permeability of OM, permeation rates were compared with the OM suspension formula (containing 0.25% v/w CMC). The experiment was performed on a 96-well MultiScreen® PAMPA filter plate (MAIPN4510). The permeability of olmesartan formulations from the donor to acceptor compartment separated by a HDM membrane were determined by the previous validated HPLC method. We created positive control series without coating hexadecane membrane to present the LBDDS and suspension formulation permeability from uncoated plates. The effective permeability constant (P_e) was calculated by the formula and improvement of permeability of OM-LBDDS formulation from hexadecane membrane was confirmed. On the contrary there was no permeation of OM-Suspension in the hexadecane coated plates. As a result, the intestinal permeability of OM-LBDDS was calculated to be at least 100 times more than the suspension. OM-Suspension permeation was only observed in the hexadecane uncoated positive control plates. This was also manifestation of HDM-PAMPA mimicking permeability of intestines because of its lipidic construction.

Ibuprofen molecular aggregation by direct back-face transmission steady-state fluorescence

Direct back-face transmission steady-state fluorescence was successfully applied to the study of aggregation of ibuprofen and ibuprofenate anion in solution taking advantage of its own fluorescence. The analysis of the experimental data involves the use of the differential reabsorption model to account for re-absorption phenomenon and the closed association model to describe aggregation. The fluorescence quantum yield of ibuprofenate increases when it aggregates in the presence of sodium, but it markedly decreases when 1-butyl-3-methylimidazolium is used as counterion. The proposed methodology allows the accurate determination of the critical aggregation concentrations and the mean aggregation numbers. Results were supported by complementary techniques such as time-resolved fluorescence, ¹H-NMR and small-angle neutron and X-ray scattering. The developed technique constitutes a promising strategy to characterize the aggregation of poorly fluorescent surfactants that aggregates at high concentrations and hence at high absorbance values, conditions in which the most common right-angle configuration for fluorescence acquisition is troublesome due to re-absorption.

Elucidating the Impact of Surfactants on the Performance of Dissolving Microneedle Array Patches

The need for biocompatible polymers capable of dissolving in the skin while exhibiting reasonable mechanical features and delivery efficiency limits the range of materials that could be utilized in fabricating dissolving microneedle array patches (MAPs). The incorporation of additives, such as surfactants, during microneedle fabrication might be an alternative solution to overcome the limited range of materials used in fabricating dissolving MAPs. However, there is a lacuna in the knowledge on the effect of surfactants on the manufacture and performance of dissolving MAPs. The current study explores the role of surfactants in the manufacture and performance of dissolving MAPs fabricated from poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) loaded with the model drugs, ibuprofen sodium and itraconazole. Three nonionic surfactants, Lutrol F108, Pluronic F88, and Tween 80, in solutions at varying concentrations (0.5, 1.0, and 2.0% w/w) were loaded into these dissolving MAPs. It was discovered that all of the dissolving MAPs that incorporated surfactant displayed a lower reduction in the microneedle height (≈10%) relative to the control formulation (≈20%) when subjected to a compressive force of 32 N. In addition, the incorporation of surfactants in some instances enhanced the insertion profile of these polymeric MAPs when evaluated using ex vivo neonatal porcine skin. The incorporation of surfactant into ibuprofen sodium-loaded dissolving MAPs improved the insertion depth of MAPs from 400 μm down to 600 μm. However, such enhancement was not apparent when the MAPs were loaded with the model hydrophobic drug, itraconazole. Skin deposition studies highlighted that the incorporation of surfactant enhanced the delivery efficiency of both model drugs, ibuprofen sodium and itraconazole. The incorporation of surfactant enhanced the amount of ibuprofen sodium delivered from 60.61% up to ≈75% with a majority of the drug being delivered across the skin and into the receptor compartment. On the other hand, when surfactants were added into MAPs loaded with the model hydrophobic drug itraconazole, we observed enhancement in intradermal delivery efficiency from 20% up to 30%, although this did not improve the delivery of the drug across the skin. This work highlights that the addition of nonionic surfactant is an alternative formulation strategy worth exploring to improve the performance and delivery efficiency of dissolving MAPs.

Binding of Inhibitors to BACE1 Affected by pH-Dependent Protonation: An Exploration from Multiple Replica Gaussian Accelerated Molecular Dynamics and MM-GBSA Calculations

To date, inhibiting the activity of β-amyloid cleaving enzyme 1 (BACE1) has been considered an efficient approach for treating Alzheimer's disease (AD). In the current work, multiple replica Gaussian accelerated molecular dynamics (MR-GaMD) simulations and the molecular mechanics general Born surface area (MM-GBSA) method were combined to investigate the effect of pH-dependent protonation on the binding of the inhibitors CS9, C6U, and 6WE to BACE1. Dynamic analyses based on the MR-GaMD trajectory show that pH-dependent protonation strongly affects the structural flexibility, correlated motions, and dynamic behavior of inhibitor-bound BACE1. According to the constructed free energy profiles, in the protonated state at low pH, inhibitor-bound BACE1 tends to populate at more conformations than in high pH. The binding free energies calculated by MM-GBSA suggest that inhibitors possess stronger binding abilities under the protonation conditions at high pH than under the protonation conditions at low pH. Moreover, pH-dependent protonation exerts a significant effect on the hydrogen bonding interactions of CS9, C6U, and 6WE to BACE1, which correspondingly alters the binding abilities of the three inhibitors to BACE1. Furthermore, in different protonated environments, three inhibitors share common interaction clusters and similar binding sites in BACE1, which are reliably used as efficient targets for the design of potent inhibitors of BACE1.

Determination of Critical Micelle Concentration from the Diffusion-Driven Dilution of Micellar Aqueous Mixtures

Micellization is a phenomenon of central importance in surfactant solutions. Here, we demonstrate that the diffusion-based spreading of the free boundary between a micellar aqueous solution and pure water yields a one-dimensional spatial profile of surfactant concentration that can be used to identify the critical micelle concentration, here denoted as C*. This can be achieved because dilution of micelles into water leads to their dissociation at a well-defined position along the concentration profile and an abrupt increase in the diffusion coefficient. Rayleigh interferometry was successfully employed to determine C* values for three well-known surfactants in water at 25 °C: Triton X-100 (TX-100), sodium dodecyl sulfate (SDS), and poly(oxyethylene)(4)Lauryl Ether (Brij-30). The dependence of C* on salt concentration was also characterized for TX-100 in the presence of Na₂SO₄, NaCl, and NaSCN. Accurate values of C* can be directly identified by visual inspection of the corresponding concentration-gradient profiles. To apply the method of least squares to experimental concentration profiles, a mathematical expression was derived from Fick's law and the pseudophase separation model of micellization with the inclusion of appropriate modifications. While Rayleigh interferometry was employed in our experiments, this approach can be extended to any experimental technique that yields one-dimensional profiles of surfactant concentration. Moreover, diffusion-driven surfactant disaggregation is precise, noninvasive, requires single-sample preparation, and applies to both nonionic and ionic surfactants. Thus, this work provides the foundation of diffusion-driven dilution methods, thereby representing a valuable addition to existing techniques for the determination of C*.

Affinity of Lipophilic Drugs to Mixed Lipid Aggregates in Simulated Gastrointestinal Fluids

Mixed lipid aggregates, comprising of bile salts and phospholipids, present in the small intestine assist in drug solubilization and subsequent drug dissolution and absorption through the intestinal epithelium. The increased variability in their levels, observed physiologically, may create challenges not only for in vivo bioavailability and bioequivalence studies, but also for in vitro bio-predictive studies as correlations between in vitro and in vivo data are not always successful. The current study investigated the impact of biorelevant dissolution media, with physiologically relevant sodium taurocholate and lecithin levels, on the apparent solubility and affinity of lipophilic compounds with a wide range of physicochemical properties (drug ionization, drug lipophilicity, molecular weight) to mixed lipid aggregates. Apparent solubility data in biorelevant dissolution media for the studied neutral drugs, weak bases and weak acids were compared against a phosphate buffer pH 6.5 in the absence of these lipidic components. Presence of mixed lipid aggregates enhanced the apparent solubility of the majority of compounds and the use of multivariate data analysis identified the significant parameters affecting drug affinity to mixed lipid aggregates based on the chemical class of the drug. For neutral drugs, increasing bile salt concentrations and/or drug lipophilicity resulted in greater enhancement in apparent solubility at 24-hr. For weak bases and weak acids, the effect of increasing bile salt levels on apparent solubility depended mostly on an interplay between drug lipophilicity and drug ionization.

Nitrone-Trolox conjugate as an inhibitor of lipid oxidation: Towards synergistic antioxidant effects

Free radical scavengers like α-phenyl-N-tert-butylnitrone (PBN) and 6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid (Trolox) have been widely used as protective agents in various biomimetic and biological models. A series of three amphiphilic Trolox and PBN derivatives have been designed by adding to those molecules a perfluorinated chain as well as a sugar group in order to render them amphiphilic. In this work, we have studied the interactions between these derivatives and lipid membranes to understand how they influence their ability to prevent membrane lipid oxidation. We showed the derivatives better inhibited the AAPH-induced oxidation of 1,2-dilinoleoyl-sn-glycero-3-phosphocholine (DLiPC) small unilamellar vesicles (SUVs) than the parent compounds. One of the derivatives, bearing both PBN and Trolox moieties on the same fluorinated carrier, exhibited a synergistic antioxidant effect by delaying the oxidation process. We next investigated the ability of the derivatives to interact with DLiPC membranes in order to better understand the differences observed regarding the antioxidant properties. Surface tension and fluorescence spectroscopy experiments revealed the derivatives exhibited the ability to form monolayers at the air/water interface and spontaneously penetrated lipid membranes, underlying pronounced hydrophobic properties in comparison to the parent compounds. We observed a correlation between the hydrophobic properties, the depth of penetration and the antioxidant properties and showed that the location of these derivatives in the membrane is a key parameter to rationalize their antioxidant efficiency. Molecular dynamics (MD) simulations supported the understanding of the mechanism of action, highlighting various key physical-chemical descriptors.

A lipophilic prodrug of Danshensu: preparation, characterization, and in vitro and in vivo evaluation

Danshensu [3-(3, 4-dihydroxyphenyl) lactic acid, DSS], one of the significant cardioprotective components, is extracted from the root of Salvia miltiorrhiza. In the present study, an ester prodrug of Danshensu (DSS), palmitoyl Danshensu (PDSS), was synthesized with the aim to improve its oral bioavailability and prolong its half-life. The in vitro experiments were carried out to evaluate the physicochemical properties and stability of PDSS. Although the solubility of PDSS in water was only 0.055 mg·mL^-1, its solubility in FaSSIF and FeSSIF reached 4.68 and 9.08 mg·mL^-1, respectively. Octanol-water partition coefficient (log P) was increased from -2.48 of DSS to 1.90 of PDSS. PDSS was relatively stable in the aqueous solution in pH range from 5.6 to 7.4. Furthermore, the pharmacokinetics in rats was evaluated after oral administration of PDSS and DSS. AUC and t_1/2 of PDSS were enhanced up to 9.8-fold and 2.2-fold, respectively, compared to that of DSS. C_max was 1.67 ± 0.11 μg·mL^-1 for PDSS and 0.81 ± 0.06 μg·mL^-1 for DSS. Thus, these results demonstrated that PDSS had much higher oral bioavailability and longer circulation time than its parent drug.

Study of interactions of mononucleotides with 1,4-dihydropyridine vesicles using NMR and ITC techniques

The possible binding site of mononucleotides is the phosphate group with important hydrophobic interactions between the mononucleotides and the alkyl chains of DHP derivatives.

Potent and Selective BACE-1 Peptide Inhibitors Lower Brain Aβ Levels Mediated by Brain Shuttle Transport

Therapeutic approaches to fight Alzheimer's disease include anti-Amyloidβ (Aβ) antibodies and secretase inhibitors. However, the blood-brain barrier (BBB) limits the brain exposure of biologics and the chemical space for small molecules to be BBB permeable. The Brain Shuttle (BS) technology is capable of shuttling large molecules into the brain. This allows for new types of therapeutic modalities engineered for optimal efficacy on the molecular target in the brain independent of brain penetrating properties. To this end, we designed BACE1 peptide inhibitors with varying lipid modifications with single-digit picomolar cellular potency. Secondly, we generated active-exosite peptides with structurally confirmed dual binding mode and improved potency. When fused to the BS via sortase coupling, these BACE1 inhibitors significantly reduced brain Aβ levels in mice after intravenous administration. In plasma, both BS and non-BS BACE1 inhibitor peptides induced a significant time- and dose-dependent decrease of Aβ. Our results demonstrate that the BS is essential for BACE1 peptide inhibitors to be efficacious in the brain and active-exosite design of BACE1 peptide inhibitors together with lipid modification may be of therapeutic relevance.

Investigation of the Dissolution Profile of Gliclazide Modified-Release Tablets Using Different Apparatuses and Dissolution Conditions

In the absence of an official dissolution method for modified-release tablets of gliclazide, dissolution parameters, such as apparatuses (1, 2, and 3), rotation speeds, pH, and composition of the dissolution medium were investigated. The results show that although the drug presents a pH-mediated solubility (pH 7.0 > 6.8 > 6.4 > 6.0 > 5.5 > 4.5), the in vitro release of the studied tablets was not dependent on this parameter, despite of the apparatus tested. On the other hand, the rotation speed demonstrated a greater influence (100 rpm >50 rpm). Using similar hydrodynamic conditions, the three different apparatuses were compared in pH 6.8 and provided the following trend: apparatus 1 at 100 rpm >2 at 50 rpm ≈3 at 10 dpm. As a complete, but slow release is expected from modified-release formulations, apparatus 2, in phosphate buffer pH 6.8 and 100 rpm, were selected as the optimized dissolution method. In comparison to apparatus 1 under the same conditions, the paddle avoids the stickiness of formulation excipients at the mesh of the basket, which could prejudice the release of gliclazide. Results obtained with biorelevant medium through the developed dissolution method were similar to the buffer solution pH 6.8. The application of the optimized method as a quality control test between two different brands of gliclazide modified-release tablets showed that both dissolution profiles were considered similar by the similarity factor (f2 = 51.8). The investigation of these dissolution profiles indicated a dissolution kinetic following first-order model.