General Strategy for Making CO2-Switchable Polymers

Gas-Responsive and Gas-Releasing Polymer Assemblies

In order to explore the unique physiological roles of gas signaling molecules and gasotransmitters in vivo, chemists have engineered a variety of gas-responsive polymers that can monitor their changes in cellular milieu, and gas-releasing polymers that can orchestrate the release of gases. These have advanced their potential applications in the field of bio-imaging, nanodelivery, and theranostics. Since these polymers are of different chain structures and properties, the morphology of their assemblies will manifest distinct transitions after responding to gas or releasing gas. In this review, we summarize the fundamental design rationale of gas-responsive and gas-releasing polymers in structure and their controlled transition in self-assembled morphology and function, as well as present some perspectives in this prosperous field. Emerging challenges faced for the future research are also discussed.

Development and Applications of CO2-Responsive Gels in CO2 Flooding and Geological Storage

Gel systems are widely used as plugging materials in the oil and gas industry. Gas channeling can be mitigated by reducing the heterogeneity of the formation and the mobility ratio of CO2 to crude oil. Cracks and other CO2 leaking pathways can be plugged during the geological storage of CO2 to increase the storage stability. By adding CO2-responsive groups to the classic polymer gel's molecular chain, CO2 responsive gel is able to seal and recognize CO2 in the formation while maintaining the superior performance of traditional polymer gel. The application of CO2 responsive gels in oil and gas production is still in the stage of laboratory testing on the whole. To actually achieve the commercial application of CO2 responsive gels in the oil and gas industry, it is imperative to thoroughly understand the CO2 responsive mechanisms of the various types of CO2 responsive gels, as well as the advantages and drawbacks of the gels and the direction of future development prospects. This work provides an overview of the research progress and response mechanisms of various types of CO2 responsive groups and CO2 responsive gels. Studies of the CO2 responsive gel development, injectivity, and plugging performance are comprehensively reviewed and summarized. The shortcomings of the existing CO2 responsive gels system are discussed and the paths for future CO2 responsive gel development are suggested.

CO2-responsive gels

CO₂-responsive materials undergo a change in chemical or physical properties in response to the introduction or removal of CO₂. The use of CO₂ as a stimulus is advantageous as it is abundant, benign, inexpensive, and it does not accumulate in a system. Many CO₂-responsive materials have already been explored including polymers, latexes, surfactants, and catalysts. As a sub-set of CO₂-responsive polymers, the study of CO₂-responsive gels (insoluble, cross-linked polymers) is a unique discipline due to the unique set of changes in the gels brought about by CO₂ such as swelling or a transformed morphology. In the past 15 years, CO₂-responsive gels and self-assembled gels have been investigated for a variety of emerging potential applications, reported in 90 peer-reviewed publications. The two most widely exploited properties include the control of flow (fluids) via CO₂-triggered aggregation and their capacity for reversible CO₂ absorption-desorption, leading to applications in Enhanced Oil Recovery (EOR) and CO₂ sequestration, respectively. In this paper, we review the preparation, properties, and applications of these CO₂-responsive gels, broadly classified by particle size as nanogels, microgels, aerogels, and macrogels. We have included a section on CO₂-induced self-assembled gels (including poly(ionic liquid) gels).

Hydrophobically-enhanced "on water" cycloaddition of CO2 to long-chain terminal epoxides

Long-chain cyclic carbonates (LC-CC) are attractive building blocks and non-ionic surfactants. We demonstrate a convenient methodology to prepare LC-CC in miniemulsions of epoxide droplets in water. The pre-organization and confinement of the reagents from H-bond and hydrophobic interactions allow the target process to proceed at mild temperatures under atmospheric CO₂.

Electrical Response of Poly(N-[3-(dimethylamino)Propyl] Methacrylamide) to CO2 at a Long Exposure Period

Amine-functionalized polymers (AFPs) are able to react with carbon dioxide (CO₂) and are therefore useful in CO₂ capture and sensing. To develop AFP-based CO₂ sensors, it is critical to examine their electrical responses to CO₂ over long periods of time, so that the device can be used consistently for measuring CO₂ concentration. To this end, we synthesized poly(N-[3-(dimethylamino)propyl] methacrylamide) (pDMAPMAm) by free radical polymerization and tested its ability to behave as a CO₂-responsive polymer in a transducer. The electrical response of this polymer to CO₂ upon long exposure times was measured in both the aqueous and solid phases. Direct current resistance measurement tests on pDMAPMAm films printed along with the silver electrodes in the presence of CO₂ at various concentrations reveal a two-region electrical response. Upon continuous exposure to different CO₂ flow rates (at a constant pressure of 0.2 MPa), the resistance first decreased over time, reaching a minimum, followed by a gradual increase with further exposure to CO₂. A similar trend is observed when CO₂ is introduced to an aqueous solution of pDMAPMAm. The in situ monitoring of pH suggests that the change in resistance of pDMAPMAm can be attributed to the protonation of tertiary amine groups in the presence of CO₂. This two-region response of pDMAPMAm is based on a proton-hopping mechanism and a change in the number of free amines when pDMAPMAm is exposed to various levels of CO₂.

CO2 Capture and Low-Temperature Release by Poly(aminoethyl methacrylate) and Derivatives

Poly(aminoethyl methacrylate) (PAEMA), poly(ethylene oxide)-block-(aminoethyl methacrylate) (PEO-PAEMA), and their guanidinylated derivates, poly(guanidine ethyl methacrylate) (PGEMA) and poly(ethylene oxide)-block-(guanidine ethyl methacrylate) (PEO-PGEMA), were prepared to study their capabilities for CO₂ adsorption and release. The polymers of different forms or degree of guanidinylation were thoroughly characterized, and their interaction with CO₂ was studied by NMR and calorimetry. The extent and kinetics of adsorption and desorption of N₂ and CO₂ were investigated by thermogravimetry under controlled gas atmospheres. The materials did not adsorb N₂, whereas CO₂ could be reversibly adsorbed at room temperature and released by an elevated temperature. The most promising polymer was PGEMA with a guanidinylation degree of 7% showing a CO₂ adsorption capacity of 2.4 mmol/g at room temperature and a desorption temperature of 72 °C. The study also revealed relations between the polymer chemical composition and CO₂ adsorption and release characteristics that are useful in future formulations for CO₂ adsorbent polymer materials.

Dual Gas-responsive Fluorescent Diblock Copolymer Synthesized via RAFT Polymerization

Stimulus-responsive polymers with luminescence properties have a wide range of applications in the fields of controlled drug release, fluorescent probes, and biological stents. In this paper, carbon dioxide (CO₂)/oxygen (O₂) dual-responsive fluorescent diblock copolymers were synthesized by the reversible addition-fragmentation chain transfer (RAFT) polymerization method with two fluorescent monomers synthesized as its luminescence source, DEAEMA (CO₂ responsive monomer) and tFMA (O₂ responsive monomer). An experimental study demonstrated that the synthesized stimulus-responsive fluorescent polymer had a high sensitivity to CO₂; the double-responsive fluorescent diblock copolymer could form and achieve the reversal of polymer micelles in the aqueous solution when it was sequentially subjected to the introduction of CO₂ and O₂.

Preparation of amphiphilic copolymers via base-catalyzed hydrolysis of quaternized poly[2-(dimethylamino)ethyl methacrylate]

The multi-stimuli-responsiveness of tertiary amine-containing polyacrylates makes them highly attractive for use in a wide range of applications. In the last decade, poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) has received exceptionally large attention...

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Preparation of a Novel CO2-Responsive Polymer/Multiwall Carbon Nanotube Composite

A CO2-responsive composite of multiwall carbon nanotube (MWCNT) coated with polydopamine (PDA) and polydimethylamino-ethyl methacrylate (PDMAEMA) was prepared. The PDA was first self-polymerized on the surface of carbon nanotube. 2-bromoisobutyryl bromide (BiBB) was then immobilized by PDA and then initiated the ATRP of DMAEMA on the carbon nanotube surface. The resulting composite was characterized by Fourier-transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The CO2-responsive test was performed by bubbling CO2 into the mixture of MWCNT-PDA-PDMAEMA composite in water. A well-dispersed solution was obtained and the UV-Vis transmittance decreased dramatically. This is attributed to the reaction between PDMAEMA and CO2. The formation of ammonium bicarbonates on the surface of carbon nanotubes leads to the separation of nanotube bundles. This process can be reversed as the removal of CO2 by bubbling N2.

Phototunable Cloud Point Temperatures Stemming from Cyclic Topology: Synthesis and Thermal Phase Transition Behavior of Cyclic Poly(N-acryloylsarcosine methyl ester)

Cyclic polymers possess distinct properties compared with their linear counterparts, such as smaller hydrodynamic volume, lower viscosity, and higher glass-transition temperature, etc. To explore the impact of the cyclic topology on the thermo-induced phase transition behavior of poly(N-acryloylsarcosine methyl ester) (PNASME), the anthracene-terminated telechelic PNASMEs are synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of monomer NASME using a bifunctional chain transfer agent (CTA) with two anthryl groups. Subsequently, cyclic PNASMEs are prepared via UV-induced cyclization under 365 nm UV. There are considerable increases (up to 50 °C) for the cloud point temperatures (T_cp s) of cyclic PNASMEs compared with the linear counterparts. In view of the increment, the T_cp of PNASME is tuned by varying the cyclic/linear ratio (the molar ratio between cyclic PNASME and linear PNASME in the product) with different irradiation time.

A novel photochemical sensor based on quinoline-functionalized phenazine derivatives for multiple substrate detection

A novel photochemical sensor based on quinoline-functionalized phenazine derivatives for highly sensitive detection of multiple substrates (l-Arg, CO₂, and pH) was designed and synthesized.

Salt-Enhanced CO2-Responsiveness of Microgels

Here, we report a distinct mechanism for harnessing CO₂-responsiveness through enhancing CO₂ capture ability. The finding is demonstrated on the microgels that are composed of oligo(ethylene glycol) and sulfonate moieties. Laser light scattering studies on dilute aqueous dispersion of these microgels indicated a low CO₂-responsivity, which can be significantly enhanced by adding NaCl and other salts. This salt-enhanced CO₂-responsiveness of microgels can be elucidated by the antipolyelectrolyte behavior and its superposition of forming cross-links physically with CO₂ as an intermediate. Further results of the filtration experiments on microgel translocation through pores suggest the feasibility of the explanation. The finding is also supported by the CO₂ capture-release experiments on the dispersion, which can reversibly absorb and desorb CO₂.

A CO2-gated anodic aluminum oxide based nanocomposite membrane for de-emulsification

A carbon-dioxide-responsive organic-inorganic nanocomposite membrane based on a through-hole anodic aluminum oxide (AAO) template was constructed. The composite was prepared via a surface-initiated reversible addition-fragmentation chain-transfer (SI-RAFT) polymerization strategy to achieve the grafting of poly(methyl methacrylate-co-2-(diethylamino)ethyl methacrylate) brushes on the AAO membrane. The grafted polymer chain length could be controlled based on the feed ratio between the free chain transfer agent (CTA) and reactive monomer, e.g., methyl methacrylate and 2-(diethylamino)ethyl methacrylate, resulting in a membrane that features adjustable water permeability. Importantly, the membrane pore size and surface wettability could be switched from hydrophobic to hydrophilic upon the introduction of carbon dioxide and nitrogen gases. This allowed for the nanocomposite membrane to be utilized for controlled water flux and oil/water emulsion separation. The simple fabrication methodology as well as sustainable gaseous stimulus will be useful for the construction of future smart membranes.

Increasing cell density/decreasing cell size to produce microcellular and nanocellular thermoplastic foams: A review

Nowadays, polymeric foams have attracted particular attention in scientific and industrial societies due to their unique properties, such as high strength to weight ratio, excellent thermal and sound insulation, and low cost. Researchers have shown that the extraordinary properties of polymeric foams such as superior thermal insulation, can be achieved by increasing the cell density/decreasing the cell size. In this regard, firstly, the most important foaming processes, i.e. batch, extrusion, and injection molding are studied in the present research. Then, cell nucleation stage as the most crucial phenomenon for achieving high cell density/small cell size is investigated in detail. In the next step, the most important researches in the field of polymeric foams are introduced in which the largest cell densities/smallest cell sizes have been achieved. The investigations show that the most remarkable results (highest cell densities/smallest cell sizes) belong to the batch process. Also, the use of nucleating agents, increasing the solubility of blowing agent into the polymer, and the use of nanoparticles are the most efficient solutions to achieve microcellular and nanocellular structures.

CO2-Gas-Responsive Liquid Marble

Liquid marbles were prepared using a water droplet and nonprotonated hydrophobic poly(2-N,N-diisopropylaminoethyl methacrylate) (PDiPAEMA) powder. Although the nonprotonated PDiPAEMA was hydrophobic, PDiPAEMA became hydrophilic because of the protonation of the pendant tertiary amino groups under acidic conditions. Therefore, liquid marbles stabilized with PDiPAEMA powder could float on a neutral to basic water surface, but they immediately disintegrated on an acidic water surface. Furthermore, the liquid marbles floating on the water surface disintegrated in response to CO₂ gas because the water became acidic as a result of carbonic acid formation.

A CO2-responsive smart fluid based on supramolecular assembly structures varying reversibly from vesicles to wormlike micelles

CO2-responsive smart fluids have been widely investigated in the past decade. In this article, we reported a CO2-responsive smart fluid based on supramolecular assembly structures varying from vesicles to wormlike micelles. Firstly, oleic acid and 3-dimethylaminopropylamine reacted to form a single-chain weak cationic surfactant with a tertiary amine head group, N-[3-(dimethylamino)propyl]oleamide (NDPO). Then, 1,3-dibromopropane was used as the spacer to react with NDPO to form a gemini cationic surfactant, trimethylene α,ω-bis(oleate amide propyl dimethyl ammonium bromide) (GCS). By controlling the feed ratio of 1,3-dibromopropane and NDPO, we found that the mixtures of GCS and NDPO with the molar ratio of 7 : 3 approximately could form vesicles in aqueous solution by supramolecular self-assembly. After bubbling CO2, the tertiary amine of NDPO was protonated. The packing parameter of the mixed surfactants reduced accordingly, accompanied by the transition of aggregates from vesicles to wormlike micelles. As a result, the zero-shear viscosity of the solution increased by more than four orders in magnitude. When the solid content of GCS/NPDO mixtures was higher than 5 wt% in solution, the sample treated by CO2 behaved as a gel over a wide frequency range with shear-thinning and self-healing properties. In addition, the sol-gel transition could be repeatedly and reversibly switched by cyclically bubbling CO2 and N2. Our effort may provide a new strategy for the design of CO2-responsive smart fluids, fostering their use in a range of applications such as in enhanced oil recovery.

CO2-triggered reversible phase transfer of graphene quantum dots for visible light-promoted amine oxidation

Carbon dots, emerging as novel photoluminescent nanomaterials, have attracted increasing attention for photocatalytic applications such as hydrogen evolution, carbon dioxide reduction, pollutant degradation and organic synthesis. However, the separation of carbon dots from the reaction system is always a cumbersome process, which may limit their applications in photocatalysis. Herein, we report the synthesis of a graphene quantum dot with CO2-switchable reversible phase transfer performance via a facile surface functionalization approach. The mechanism of this hydrophilicity and hydrophobicity alteration involves the protonation-deprotonation transformation and reversible formation of hydrophilic bicarbonate salts when CO2 is bubbled and removed. Then, the obtained graphene quantum dot was utilized as a visible-light photocatalyst for the oxidative coupling of amines. Our photocatalyst demonstrates excellent catalytic efficiency with both high reaction conversion and selectivity. Furthermore, the proposed graphene quantum dot could be recycled via a simple CO2 bubbling method.

Two-Way CO2-Responsive Polymer Particles with Controllable Amphiphilic Properties

Multiple stimuli-responsive amphiphilic block copolymers of poly(methacrylic acid) (PMAA) and poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) were used as emulsifiers to prepare two-way CO2 stimuli-responsive poly(methyl methacrylate) (PMMA) latex particles via aqueous emulsion polymerization. The polymerization at pH 2 and 50 °C produced mainly PDMAEMA-surfaced PMMA latex particles, whereas the polymerization at pH 12 and 50 °C produced mainly PMAA-surfaced particles. Both types of latex particles appeared to precipitate at higher pH values from the emulsifier of a longer PDMAEMA block length. The direction from precipitation to dispersion for PDMAEMA-surfaced particles or from dispersion to precipitation for PMAA-surfaced particles in response to CO2 bubbling of the pH 12 dispersion of particles depended on the PDMAEMA block length. Together, this study reveals that-by tuning the PDMAEMA block length in PMAA-b-PDMAEMA used as an emulsifier and polymerization at pH 2 or 12-PMMA latex particles can exhibit two-way CO2 responsiveness between dispersion and precipitation. Thus, due to their simple preparation and unique dual pH and CO2 responsiveness, these newly developed PMAA-b-PDMAEMA emulsifiers provide a highly efficient approach for the development of smart PMMA latex nanoparticles with desirable multifunctional properties.

Inverse Pickering Emulsion Stabilized by Binary Particles with Contrasting Characteristics and Functionality for Interfacial Biocatalysis

Water-in-oil (w/o) Pickering emulsions have received considerable attention in biphasic enzymatic catalysis for their advantages of good stability, large interfacial area, and ease of product separation. However, enzymes are commonly encapsulated in the interior of aqueous droplets, which inevitably increases the diffusional resistance to catalysis. Alternatively, enzymes are immobilized or trapped into Pickering stabilizers. Often, however, these approaches suffer from leaching and a decrease of enzyme activity during the chemical treatments. We report here a new Pickering interfacial biocatalysis platform with efficient enzyme encapsulation, binary particle composition, and high catalytic performance. Our approach is based on w/o Pickering emulsions stabilized by binary particles consisting of hard silica and soft, pH-responsive microgel particles. We demonstrate that pH-responsive microgels can simultaneously stabilize a w/o Pickering emulsion, encapsulate enzymes, and catalyze reactions at the water/oil interface. In addition, we show that the coordination with rigid silica nanoparticles as additional stabilizers markedly improves the emulsion structure and will provide a new avenue for the preparation of w/o Pickering emulsion and concept of biphasic catalysis.

Tuning catalysis of boronic acids in microgels by in situ reversible structural variations

The catalysis of boronic acids immobilized in polymer microgels can be modulated by bubbling with N₂/CO₂ gas, and in some cases by adding glucose, making their catalytic activity comparable or even superior to that of the corresponding free boronic acid monomers homogeneously dispersed in solutions and, more importantly, making these boronic-acid-containing polymer microgels able to catalyze alternate reactions that may extend the usefulness. This enhanced catalytic function of these boronic-acid-containing microgels as organoboron acid catalysts is plausibly achieved via in situ reversibly structural variations. Kinetic studies have been carried out on the model boronic-acid-catalyzed aza-Michael addition, aldol, amidation, and [4 + 2] cycloaddition reactions in order to better understand the catalytic process.

Carbon Dioxide and Nitrogen-Modulated Shape Transformation of Chitosan-Based Composite Nanogels

Chitosan/poly[N-(3-(dimethylamino)propyl)methacrylamide]/poly(acrylic acid) (CS/PDMAPMA/PAA) composite nanogels (CPACNGs) were fabricated in the solution of chitosan by surfactant-free emulsion polymerization. N-(3-(Dimethylamino)propyl)methacrylamide (DMAPMA) and acrylic acid (AA) were initiated by 2,2'-azobis-2-methyl-propanimidamide to graft from the backbone of chitosan. Nanogels were formed by noncovalent forces, including of hydrogen bonds, hydrophobic, and electrostatic interaction. Nanogels were characterized by transmission electron microscopy, scanning electron microscope dynamic light scattering, X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer spectra, and 1H NMR. Spherical nanoparticles were observed in the latex system. Nanogels exhibited an excellent CO2 responsivity and CO2/N2 reversible response and switchability and had a faster response rate. The morphological shape transformation of nanogels was modulated by bubbling with CO2 and N2. The responsive mechanism was explored by determining the pH and electrical conductivity. In addition, nanogels were successfully emulsified by bubbling with CO2, and then a phase transition was achieved by bubbling with N2 in the organic solvent/water mixture.

Multistimuli-Responsive Emulsifiers Based on Two-Way Amphiphilic Diblock Polymers

Diblock copolymers of poly(tert-butyl methacrylate) (PtBuMA) and poly(2-dimethylaminoethyl methacrylate) (PDMAEMA) of four different block lengths were prepared by sequential two-step reversible addition-fragmentation chain transfer radical polymerization, followed by hydrolysis of the PtBuMA blocks to obtain poly(methacrylic acid)-b-PDMAEMA (PMAA-b-PDMAEMA). The effect of the PDMAEMA block length on the multistimuli-responsive amphiphilic features of both types of diblock copolymers was investigated as CO2-switchable emulsifiers for emulsification/demulsification of n-octane (an oil) in water in response to CO2/N2 bubbling. The amphiphilicity of PtBuMA-b-PDMAEMA was switched on, and the amphiphilicity of PMAA-b-PDMAEMA was switched off by CO2 bubbling at pH 12 and 25 °C to achieve emulsification/demulsification. A longer PDMAEMA block length in PMAA-b-PDMAEMA conferred more sensitive CO2-responsive amphiphilicity but reduced the extent of recovery of emulsification ability on N2 bubbling. This newly developed diblock copolymer system could potentially serve as a "multifunctional surfactant" for CO2-switchable emulsification/demulsification of oil-in-water and water-in-oil mixtures.

A CO2-responsive hydrogel film for optical sensing of dissolved CO2

CO₂-monitoring plays an important role in medicine, environmental sciences, and food industries. Here, a new CO₂-responsive hydrogel film was fabricated from branched polyethyleneimine (BPEI) and partially oxidized dextran (PO-Dex) via layer-by-layer (LBL) assembly, based on the in situ Schiff base reaction between the two polymers. The swelling behaviours of the films were studied using Fabry-Perot fringes on their reflection spectra. Like ordinary hydrogels, the BPEI/PO-Dex films swell in water. In addition, they swell to a larger degree when CO₂ is introduced, due to the reaction between CO₂ and the amino groups in BPEI. The CO₂-induced swelling can be reported by the shift of the Fabry-Perot fringes on their reflection spectra; therefore, the BPEI/PO-Dex film can be used as an optical sensor for dissolved CO₂. In the new sensor, the BPEI/PO-Dex film acts as a CO₂-sensing material and Fabry-Perot cavity simultaneously. The introduction of ordered structure is no longer required. The response of the sensor to CO₂ is linear and reversible. Unlike other hydrogel-based sensors that suffer from a slow response, the new sensor can respond to CO₂ quickly, making it applicable for real-time, continuous monitoring of CO₂ levels in solution.

CO2-Responsive Cellulose Nanofibers Aerogels for Switchable Oil-Water Separation

Cellulose nanofibers (CNFs) aerogels with controllable surface wettability were prepared by grafting poly( N, N-dimethylamino-2-ethyl methacrylate) (PDMAEMA) polymer brushes via surface-initiated atom-transfer radical polymerization. After grafting PDMAEMA polymer, the surface of the aerogel was hydrophobic. However, in the presence of CO₂, the surface of the aerogel gradually changes from hydrophobic to hydrophilic. The porous structure and CO₂-responsiveness of PDMAEMA brushes within the CNFs aerogels allowed for the on-off switching of the oil-water mixture separation process. These CNFs aerogels were recyclable and displayed attractive separation efficiency for oil-water mixture and surfactant-stabilized emulsions. Furthermore, the switchable surface wettability holds an advantage of avoiding oil-fouling, which will greatly improve its recyclability.