Cationic Ring-Opening Polymerization of 2-Propyl-2-oxazolines: Understanding Structural Effects on Polymerization Behavior Based on Molecular Modeling

Mechanism of cationic ring-opening polymerisation of ε-caprolactone using metallocene/borate catalytic systems: a DFT and NCI study on chain initiation, propagation and termination

We present a comprehensive DFT investigation on the cationic ring-opening polymerisation (CROP) of ε-caprolactone (CL) using zirconocene/borate catalyst systems. All possible pathways of the interaction between cationic species [Cp2ZrMe+] and counteranions, [A-] = [MeB(C6F5)3]- and [B(C6F5)4]-, were examined during chain initiation, propagation, and termination steps. The calculations reveal an active chain-end mechanism with O-alkyl bond cleavage of the polymerisation. The catalytic performance of the two counteranions is found to be identical, and they influence the initial process through stabilisation of the cationic species via non-covalent interactions (NCI), with the [MeB(C6F5)3]- anion stabilising the catalyst-monomer complex more effectively than the [B(C6F5)4]- anion by 24.3 kJ mol-1. The first two propagations are likely the rate-determining step, with calculated free-energy barriers of 61.4-71.2 and 73.9-80.6 kJ mol-1 with and without the anions (A-), respectively. The presence of the counteranion significantly affects the third propagation rate, lowering the barriers up to 20 kJ mol-1. Comparison of the first termination and the third propagation shows that they are not competitive, with the termination being less facile. We also studied the initiation and propagation steps for the hafnocene catalyst and found that the Hf catalyst slightly favours the CL CROP in comparison to the Zr catalyst. Analysis of solvent and dispersion interaction demonstrates that both factors play an important role in the process. NCI analysis reveals weak (van der Waals) interactions at the contacts between the cationic species and the counteranions during the reaction course. Overall, our results offer insights into the structures and interactions involved in the polymerisation.

Computational evaluation of zirconocene catalysts for ε-caprolactone cationic ring-opening polymerization

This quantum chemical study presents the ligand effect and a structure-property relationship in the cationic ring-opening polymerization (CROP) of ε-caprolactone using zirconocene catalysts. We first examined the effects of catalyst structure on the initiation and chain propagation steps of the CROP process. A total of 54 catalyst structures were investigated to understand the influence of the ligand structure on the stability of the catalyst-monomer complex and polymerization activity. The properties of the catalysts were analyzed in terms of ancillary ligands, ligand substituents, and bridging units. Calculations showed that the polymerization follows a proposed cationic mechanism, with ring opening occurring via alkyl-bond cleavage. A correlation between complex stability and activation energy was also observed, with ligand substituents dominating in both steps. While the ancillary ligands directly affect the HOMO energy level, the bridges are mainly responsible for the catalyst geometries, resulting in reduced complex stability and higher activation energy for the propagation step. This study contributes to a better understanding of the structural characteristics of zirconocene catalysts, which offers guidance for improving CROP activities in lactone polymerization.

Poly(2-oxazoline)s as Stimuli-Responsive Materials for Biomedical Applications: Recent Developments of Polish Scientists

Poly(2-oxazoline)s are the synthetic polymers that are the products of the cationic ring-opening polymerization (CROP) of 2-oxazoline monomers. Due to their beneficial properties, from which biocompatibility, stealth behavior, high functionalization possibilities, low dispersity, stability, nonionic character, and solubility in water and organic solvents should be noted, they have found many applications and gained enormous interest from scientists. Additionally, with high versatility attainable through copolymerization or through post-polymerization modifications, this class of polymeric systems has been widely used as a polymeric platform for novel biomedical applications. The chemistry of polymers significant expanded into biomedical applications, in which polymeric networks can be successfully used in pharmaceutical development for tissue engineering, gene therapies, and also drug delivery systems. On the other hand, there is also a need to create ‘smart’ polymer biomaterials, responsive to the specified factor, that will be sensitive to various environmental stimuli. The commonly used stimuli-responsive biomedical materials are based mostly on temperature-, light-, magnetic-, electric-, and pH-responsive systems. Thus, creating selective and responsive materials that allow personalized treatment is in the interest of the scientific world. This review article focuses on recent discoveries by Polish scientists working in the field of stimuli-responsive poly(2-oxazoline)s, and their work is compared and contrasted with results reported by other world-renowned specialists.

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

An ε-caprolactone-derived 2-oxazoline inimer for the synthesis of graft copolymers

An inimer-like structure that consists of a 2-oxazoline ring for cationic ring opening polymerisation and a typical alpha-bromo ester initiator for Cu-RDRP has been synthesised using ε-Caprolactone as the starting material.

Fundamental Studies on Poly(2-oxazoline) Side Chain Isomers Using Tandem Mass Spectrometry and Ion Mobility-Mass Spectrometry

When polymer mixtures become increasingly complex, the conventional analysis techniques become insufficient for complete characterization. Mass spectrometric techniques can satisfy this increasing demand for detailed sample characterization. Even though isobaric polymers are indistinguishable using simple mass spectrometry (MS) analyses, more advanced techniques such as tandem MS (MS/MS) or ion mobility (IM) can be used. Here, we report proof of concept for characterizing isomeric polymers, namely poly(2-n-propyl-2-oxazoline) (Pn-PrOx) and poly(2-isopropyl-2-oxazoline) (Pi-PrOx), using MS/MS and IM-MS. Pi-PrOx ions lose in intensity at higher accelerating voltages than Pn-PrOx ions during collision-induced dissociation (CID) MS/MS experiments. A Pn/i-PrOx mixture could also be titrated using survival yield calculations of either precursor ions or cation ejection species. IM-MS yielded shape differences in the degree of polymerization (DP) regions showing the structural rearrangements. Combined MS techniques are thus able to identify and deconvolute the molar mass distributions of the two isomers in a mixture. Finally, the MS/MS and IM-MS behaviors are compared for interpretation. Graphical Abstract .

Cationic ring-opening polymerization of cyclic carbonates and lactones by group 4 metallocenes: A theoretical study on mechanism and ring-strain effects

Group 4 metallocene-mediated cationic ring-opening polymerizations of a series of lactones and cyclic carbonates, with different ring sizes ([Formula: see text]–8) have been theoretically studied. Using the “naked cation” approach in combination with density functional theory, the activated chain-end mechanism and the influence of transition metals, solvent and monomer ring size on the polymerizability were explored in detail. The results showed that the cationic metallocene–monomer complex, [catalyst][monomer][Formula: see text], is formed, generating cationic (carbocation ion) species responsible for polymer chain growth. We found that poor polymerizability of five-membered lactone and six-membered ring carbonate depends not only on the nature of the monomer ring size but also the relative stability of the complex, which was found to correlate well with the ring strain. Subsequently, several propagation steps take place through an SN2 reaction which involves ring opening of an active monomer, via alkyl–oxygen bond cleavage. Based on the computed activation energies of all metallocene systems, the first propagation was found to be the rate-determining step of the overall propagation and the hafnocene was found to be most active with the energy barrier of 17.6[Formula: see text]kcal/mol, followed by zirconocene (18.6[Formula: see text]kcal/mol) and titanocene (19.5[Formula: see text]kcal/mol), respectively. The mechanistic study may be applicable to the cationic ROP of lactides and other related monomers.

Poly(2-cycloalkyl-2-oxazoline)s: high melting temperature polymers solely based on Debye and Keesom van der Waals interactions

The synthesis of new 2-cycloalkyl-2-oxazoline monomers, namely 2-cyclobutyl (cBuOx), 2-cyclopentyl (cPentOx) and 2-cyclohexyl-2-oxazoline (cHexOx) is described. Polymers thereof are semi-crystalline and reveal unexpectedly high melting transitions.

Accelerated living cationic ring-opening polymerization of a methyl ester functionalized 2-oxazoline monomer

Kinetic studies on the homo- and copolymerization of 2-methoxycarboxyethyl-2-oxazoline with 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline is discussed.

Model-based design of the polymer microstructure: bridging the gap between polymer chemistry and engineering

A state-of-the-art review is presented on model-based design for next-generation polymer synthesis and modification.