Selective Postmodification of Copolymer Backbones Bearing Different Activated Esters with Disparate Reactivities

Thioether-Based Polymeric Micelles with Fine-Tuned Oxidation Sensitivities for Chemotherapeutic Drug Delivery

Oxidation-sensitive drug delivery systems (DDSs) have attracted attention due to the potential to improve efficacy and safety of chemotherapeutics. These systems are designed to release the payload in response to oxidative stress conditions, which are associated with many types of cancer. Despite extensive research on the development of oxidation-sensitive DDS, the lack of selectivity toward cancer cells over healthy cells remains a challenge. Here, we report the design and characterization of polymeric micelles containing thioether groups with varying oxidation sensitivities within the micellar core, which become hydrophilic upon thioether oxidation, leading to destabilization of the micellar structure. We first used the thioether model compounds, 3-methylthiopropylamide (TPAM), thiomorpholine amide (TMAM), and 4-(methylthio)benzylamide (TPhAM) to investigate the effect of the chemical structures of the thioethers on the oxidation by hydrogen peroxide (H₂O₂). TPAM shows the fastest oxidation, followed by TMAM and TPhAM, showing that the oxidation reaction of thioethers can be modulated by changing the substituent groups bound to the sulfur atom. We next prepared micelles containing these different thioether groups within the core (TP, TM, and TPh micelles). The micelles containing the thioether groups with a higher oxidation sensitivity were destabilized by H₂O₂ at a lower concentration. Micelle destabilization was also tested in human liver cancer (HepG2) cells and human umbilical vein endothelial cells (HUVECs). The TP micelles having the highest oxidation sensitivity were destabilized in both HepG2 cells and HUVECs, while the TPh micelles, which showed the lowest reactivity toward H₂O₂, were stable in these cell lines. The TM micelles possessing a moderate oxidation sensitivity were destabilized in HepG2 cells but were stable in HUVECs. Furthermore, the micelles were loaded with doxorubicin (Dox) to evaluate their potential in drug delivery applications. Among the micelles, the TM micelles loaded with Dox showed the enhanced relative toxicity in HepG2 cells over HUVECs. Therefore, our approach to fine-tune the oxidation sensitivity of the micelles has potential for improving therapeutic efficacy and safety of drugs in cancer treatment.

Elucidating Monomer Character of an Alkenyl Boronate through Radical Copolymerization Leads to Copolymer Synthesis beyond the Limitation of Copolymerizability by Side-Chain Replacement

Isopropenyl boronic acid pinacol ester (IPBpin) was used as a comonomer in radical polymerization with a wide range of common vinyl monomers for elucidation of the monomer character and syntheses of conventionally inaccessible copolymers via the replacement of the boron pendant. The study revealed that the boron-containing monomer is categorized into an electron-rich conjugated monomer, which was well consistent with the results of density functional theory (DFT)-based investigation. One of the thus obtained copolymers, the IPBpin-styrene copolymer, was successfully transformed into an α-methyl vinyl alcohol (MVA)-styrene counterpart via oxidation of the boron pendant. The copolymer cannot be synthesized even with the acetyl-protected monomer instead of IPBpin due to poor copolymerization ability based on the nonconjugated character.

Poly(2-isopropenyl-2-oxazoline) – a structural analogue to poly(vinyl azlactone) with Orthogonal Reactivity

A modular copolymer platform based on two oxazole derivatives is presented. Post-polymerisation modifications revealed the potential to selectively modify the individual side groups, providing access to functional copolymer libraries in the future.

Copolymerization of Pentafluorophenylmethacrylate with Hydrophilic Methacrylamide Monomers Induces Premature Hydrolytic Cleavage

Active ester polymers are commonly used for fast development of novel polymer libraries, but they require post-polymerization modification, which is not atom-efficient or economical. In order to more efficiently produce 2-hydroxypropyl methacrylamide (HPMAm) libraries, it would be advantageous to perform a direct copolymerization with active ester monomers. In this work, the synthesis of copolymer libraries of pentafluorophenyl methacrylate (PFPMA) and the hydrophilic monomer HPMAm is investigated. Surprisingly, HPMAm induces premature hydrolytic cleavage of PFPMA, which occurs during polymerization and depends on the HPMAm/PFPMA feed ratio. Copolymerization of PFPMA with N-isopropylmethacrylamide and the methacrylate monomers 2-hydroxypropylmethacrylate and N-isopropylmethacrylate reveals that the hydrolytic cleavage is promoted by copolymerization with methacrylamides only. By switching from a thermal- to a light-based initiator and lowering the reaction temperature, premature hydrolytic cleavage of PFPMA is avoided and allows direct copolymerization of HPMAm together with PFPMA to create polymer libraries for biomaterial screening.

Combinatorial approaches in post-polymerization modification for rational development of therapeutic delivery systems

The combinatorial polymer library approach has been proven to be effective for the optimization of therapeutic delivery systems. The library of polymers with chemical diversity has been synthesized by (i) polymerization of functionalized monomers or (ii) post-polymerization modification of reactive polymers. Most scientists have followed the first approach so far, and the second method has emerged as a versatile approach for combinatorial biomaterials discovery. This review focuses on the second approach, especially discussing the post-modifications that employ reactive polymers as templates for combinatorial synthesis of a library of functional polymers with distinct structural diversity or a combination of different functionalities. In this way, the functional polymers have a consistent chain length and distribution, which allows for systematic optimization of therapeutic delivery polymers for the efficient delivery of genes, small-molecule drugs, and protein therapeutics. In this review, the modification of representative reactive polymers for the delivery of different therapeutic payloads are summarized. The recent advances in rational design and optimization of therapeutic delivery systems based on reactive polymers are highlighted. This review ends with a summary of the current achievements and the prospect on future directions in applying the approach of post-polymerization modification of polymers to accelerate the development of therapeutic delivery systems.

STATEMENT OF SIGNIFICANCE

A strategy to rationally design and systematically optimize polymers for the efficient delivery of specific therapeutics is highly needed. The combinatorial polymer library approach could be an effective way to this end. The post-polymerization modification of reactive polymer precursors is applicable for the combinatorial synthesis of a library of functional polymers with distinct structural diversity across a consistent degree of polymerization. This allows for parallel comparison and systematic evaluation/optimization of functional polymers for efficient therapeutic delivery. This review summarizes the key elements of this combinatorial polymer synthesis approach realized by post-polymerization modification of reactive polymer precursors towards the development and identification of optimal polymers for the efficient delivery of therapeutic agents.

Spatially resolved photochemical coding of reversibly anchored cysteine-rich domains

We present a novel methodology to generate recodable surfaces using cysteine-rich domains (CRD) via a combination of photolithography and reversible covalently peptide-driven disulfide formation. Therefore, two 21mer CRD peptide derivatives were synthesized, one bearing an electron deficient fumarate group for immobilization via nitrile imine-ene mediated cycloaddition (NITEC) to a tetrazole-functional surface. Secondly, a bromine moiety is introduced to the CRD for analytic labelling purposes to detect surface encoding. The photolithography is conducted by selectively passivating the surface with a polyethylene glycol (PEG)-fumarate via NITEC using a photomask in a dotted pattern. Consecutively, the CRD-fumarate is immobilized via NITEC adjacent to the PEG-functional areas to the unaffected tetrazole covered surface layer. Subsequently, the CRD-bromide is covalently linked to the CRD-fumarate by forming disulfide bonds under mild reoxidative conditions in a buffer solution. The CRD-bromide is released from the surface upon reduction to recover the prior state of the surface without the bromine marker. The analysis of the CRD precursors is based on electrospray ionization mass spectrometry (ESI-MS). The surface analytics were carried out via time-of-flight secondary ion mass spectrometry (ToF-SIMS), unambiguously verifying the successful immobilization as well as coding and decoding of the CRD-bromide on the surface based on dynamically reversible disulfide bond formation.

Thiol-Reactive Star Polymers Display Enhanced Association with Distinct Human Blood Components

Directing nanoparticles to specific cell types using nonantibody-based methods is of increasing interest. Thiol-reactive nanoparticles can enhance the efficiency of cargo delivery into specific cells through interactions with cell-surface proteins. However, studies to date using this technique have been largely limited to immortalized cell lines or rodents, and the utility of this technology on primary human cells is unknown. Herein, we used RAFT polymerization to prepare pyridyl disulfide (PDS)-functionalized star polymers with a methoxy-poly(ethylene glycol) brush corona and a fluorescently labeled cross-linked core using an arm-first method. PDS star polymers were examined for their interaction with primary human blood components: six separate white blood cell subsets, as well as red blood cells and platelets. Compared with control star polymers, thiol-reactive nanoparticles displayed enhanced association with white blood cells at 37 °C, particularly the phagocytic monocyte, granulocyte, and dendritic cell subsets. Platelets associated with more PDS than control nanoparticles at both 37 °C and on ice, but they were not activated in the duration examined. Association with red blood cells was minor but still enhanced with PDS nanoparticles. Thiol-reactive nanoparticles represent a useful strategy to target primary human immune cell subsets for improved nanoparticle delivery.

Amine-Reactive Azlactone-Containing Nanofibers for the Immobilization and Patterning of New Functionality on Nanofiber-Based Scaffolds

We report the design of amine-reactive polymer nanofibers and nonwoven reactive nanofiber mats fabricated by the electrospinning of azlactone-functionalized polymers. We demonstrate that randomly oriented nanofibers fabricated using a random copolymer of methyl methacrylate and 2-vinyl-4,4-dimethylazlactone contain intact and reactive azlactone groups that can be used to introduce new chemical functionality and modulate important interfacial properties of these materials (e.g., wetting behaviors) by postfabrication treatment with primary amine-based nucleophiles. The facile and "click-like" nature of these reactions permits functionalization under mild conditions without substantial changes to nanofiber or mat morphologies. This approach also enables the patterning of new functionality on mat-coated surfaces by treatment with bulk solutions of primary amines or by using methods such as microcontact printing. Further, these reactive mats can also, themselves, be contact-transferred or "printed" onto secondary surfaces by pressing them into contact with other amine-functionalized objects. Finally, we demonstrate that functionalization with hydrophobic amines can increase the stability of these materials in aqueous environments and yield hydrophobic nanofiber scaffolds useful for the design of "slippery" liquid-infused materials. The approaches reported here enable the introduction of new properties to reactive polymer mats after fabrication and, thus, reduce the need to synthesize individual functional polymers prior to electrospinning to achieve new properties. The azlactone chemistry used here broadens the scope of reactions that can be used to functionalize polymer nanofibers and is likely to prove general. We anticipate that this approach can be used with a range of amines or other nucleophiles (e.g., alcohols or thiols) to design nanofibers and reactive nanofiber-based materials with new physical properties, surface features, and behaviors that may be difficult to achieve by the direct electrospinning of conventional materials or other functional polymers.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

Synthesis of Star Polymers by RAFT Polymerization as Versatile Nanoparticles for Biomedical Applications

The precise control of polymer chain architecture has been made possible by developments in polymer synthesis and conjugation chemistry. In particular, the synthesis of polymers in which at least three linear polymeric chains (or arms) are tethered to a central core has yielded a useful category of branched architecture, so-called star polymers. Fabrication of star polymers has traditionally been achieved using either a core-first technique or an arm-first approach. Recently, the ability to couple polymeric chain precursors onto a functionalized core via highly efficient coupling chemistry has provided a powerful new methodology for star synthesis. Star syntheses can be implemented using any of the living polymerization techniques using ionic or living radical intermediates. Consequently, there are innumerable routes to fabricate star polymers with varying chemical composition and arm numbers. In comparison with their linear counterparts, star polymers have unique characteristics such as low viscosity in solution, prolonged blood circulation, and high accumulation in tumour regions. These advantages mean that, far beyond their traditional application as rheology control agents, star polymers may also be useful in the medical and pharmaceutical sciences. In this account, we discuss recent advances made in our laboratory focused on star polymer research ranging from improvements in synthesis through to novel applications of the product materials. Specifically, we examine the core-first and arm-first preparation of stars using reversible addition–fragmentation chain transfer (RAFT) polymerization. Further, we also discuss several biomedical applications of the resulting star polymers, particularly those made by the arm-first protocol. Emphasis is given to applications in the emerging area of nanomedicine, in particular to the use of star polymers for controlled delivery of chemotherapeutic agents, protein inhibitors, signalling molecules, and siRNA. Finally, we examine possible future developments for the technology and suggest the further work required to enable clinical applications of these interesting materials.

Degradable Amine-Reactive Coatings Fabricated by the Covalent Layer-by-Layer Assembly of Poly(2-vinyl-4,4-dimethylazlactone) with Degradable Polyamine Building Blocks

We report the fabrication of reactive and degradable cross-linked polymer multilayers by the reactive/covalent layer-by-layer assembly of a non-degradable azlactone-functionalized polymer [poly(2-vinyl-4,4-dimethylazlactone), PVDMA] with hydrolytically or enzymatically degradable polyamine building blocks. Fabrication of multilayers using PVDMA and a hydrolytically degradable poly(β-amino ester) (PBAE) containing primary amine side chains yielded multilayers (∼100 nm thick) that degraded over ∼12 days in physiologically relevant media. Physicochemical characterization and studies on stable films fabricated using PVDMA and an analogous non-degradable poly(amidoamine) suggested that erosion occurred by chemical hydrolysis of backbone esters in the PBAE components of these assemblies. These degradable assemblies also contained residual amine-reactive azlactone functionality that could be used to impart new functionality to the coatings post-fabrication. Cross-linked multilayers fabricated using PVDMA and the enzymatically degradable polymer poly(l-lysine) were structurally stable for prolonged periods in physiological media, but degraded over ∼24 h when the enzyme trypsin was added. Past studies demonstrate that multilayers fabricated using PVDMA and non-degradable polyamines [e.g., poly(ethylenimine)] enable the design and patterning of useful nano/biointerfaces and other materials that are structurally stable in physiological media. The introduction of degradable functionality into PVDMA-based multilayers creates opportunities to exploit the reactivity of azlactone groups for the design of reactive materials and functional coatings that degrade or erode in environments that are relevant in biomedical, biotechnological, and environmental contexts. This "degradable building block" strategy should be general; we anticipate that this approach can also be extended to the design of amine-reactive multilayers that degrade upon exposure to specific chemical triggers, selective enzymes, or contact with cells by judicious design of the degradable polyamine building blocks used to fabricate the coatings.

Synthesis and properties of couplable ABCDE star copolymers by orthogonal CuAAC and Diels–Alder click reactions

Well-defined ABCDE star quintopolymers generated by a modular and orthogonal strategy could self-assemble into intriguing nanoobjects sensitive to thermal and pH stimuli.

Post polymer modification of polyethylenimine with citrate esters: selectivity and hydrophobicity

Hydrophobic modification of water soluble PEI with citrate esters is selective and increases log P_oct.

Hydrogen-Bonded Multifunctional Supramolecular Copolymers in Water

We have investigated the self-assembly in water of molecules having a single hydrophobic bis-urea domain linked to different hydrophilic functional side chains, i.e., bioactive peptidic residues and fluorescent cyanine dyes. By using a combination of spectroscopy, scattering, and microscopy techniques, we show that each one of these molecules can individually produce well-defined nanostructures such as twisted ribbons, two-dimensional plates, or branched fibers. Interestingly, when these monomers of different functionalities are mixed in an equimolar ratio, supramolecular copolymers are preferred to narcissistic segregation. Radiation scattering and imaging techniques demonstrate that one of the molecular units dictates the formation of a preferential nanostructure, and optical spectroscopies reveal the alternated nature of the copolymerization process. This work illustrates how social self-sorting in H-bond supramolecular polymers can give straightforward access to multifunctional supramolecular copolymers.

Nanoparticles based on star polymers as theranostic vectors: endosomal-triggered drug release combined with MRI sensitivity

Dual-functional star polymers (diameters 15 nm) are synthesized producing nanoparticles with excellent colloidal stability in both water and serum. The nanoparticles are built with aldehyde groups in the core and activated esters in the arms. The different reactivity of the two functional groups to sequentially react with different amino compounds is exploited; doxorubicin (DOX) and 1-(5-amino-3-aza-2-oxypentyl)-4,7,10-tris(tert-butoxycarbonylmethyl)-1,4,7,10-tetraazacyclododecane (DO3A-tBu-NH2 )-a chelating agent effective for the complexation of Gadolinium ions (Gd). The activated ester group is employed to attach the DO3A chelating agent, while the aldehyde groups are exploited for DOX conjugation, providing a controlled release mechanism for DOX in acidic environments. DOX/Gd-loaded nanoparticles are rapidly taken up by MCF-7 breast cancer cells, subsequently releasing DOX as demonstrated using in vitro fluorescence lifetime imaging microscopy (FLIM). Endosomal, DOX release is observed, using a phasor plot representation of the fluorescence lifetime data, showing an increase of native DOX with time. The MRI properties of the stars are assessed and the relaxivity of Gd loaded in stars is three times higher than conventional organic Gd/DO3A complexes. The DOX/Gd-conjugated nanoparticles yield a similar IC50 to native DOX for breast cancer cell lines, confirming that DOX integrity is conserved during nanoparticle attachment and release.

Aziridine in polymers: a strategy to functionalize polymers by ring-opening reaction of aziridine

Aziridine-containing polymers were synthesized, and post-modification of polymers was demonstrated through ring-opening reaction of aziridine.

Homopolymer bifunctionalization through sequential thiol–epoxy and esterification reactions: an optimization, quantification, and structural elucidation study

In this study, we probe various aspects of a post-polymerization double-modification strategy involving sequential thiol–epoxy and esterification reactions for the preparation of dual-functional homopolymers.

Galactose-functionalized polyHIPE scaffolds for use in routine three dimensional culture of mammalian hepatocytes

Three-dimensional (3D) cell culture is regarded as a more physiologically relevant method of growing cells in the laboratory compared to traditional monolayer cultures. Recently, the application of polystyrene-based scaffolds produced using polyHIPE technology (porous polymers derived from high internal phase emulsions) for routine 3D cell culture applications has generated very promising results in terms of improved replication of native cellular function in the laboratory. These materials, which are now available as commercial scaffolds, are superior to many other 3D cell substrates due to their high porosity, controllable morphology, and suitable mechanical strength. However, until now there have been no reports describing the surface-modification of these materials for enhanced cell adhesion and function. This study, therefore, describes the surface functionalization of these materials with galactose, a carbohydrate known to specifically bind to hepatocytes via the asialoglycoprotein receptor (ASGPR), to further improve hepatocyte adhesion and function when growing on the scaffold. We first modify a typical polystyrene-based polyHIPE to produce a cell culture scaffold carrying pendent activated-ester functionality. This was achieved via the incorporation of pentafluorophenyl acrylate (PFPA) into the initial styrene (STY) emulsion, which upon polymerization formed a polyHIPE with a porosity of 92% and an average void diameter of 33 μm. Histological analysis showed that this polyHIPE was a suitable 3D scaffold for hepatocyte cell culture. Galactose-functionalized scaffolds were then prepared by attaching 2'-aminoethyl-β-D-galactopyranoside to this PFPA functionalized polyHIPE via displacement of the labile pentafluorophenyl group, to yield scaffolds with approximately ca. 7-9% surface carbohydrate. Experiments with primary rat hepatocytes showed that cellular albumin synthesis was greatly enhanced during the initial adhesion/settlement period of cells on the galactose-functionalized material, suggesting that the surface carbohydrates are accessible and selective to cells entering the scaffold. This porous polymer scaffold could, therefore, have important application as a 3D scaffold that offers enhanced hepatocyte adhesion and functionality.