Hierarchical Self-Assembly of Amphiphilic Homopolymer into Unique Superstructures

Comparing C2=O and C2=S Barbiturates: Different Hydrogen-Bonding Patterns of Thiobarbiturates in Solution and the Solid State

Carbonyl-centered hydrogen bonds with various strength and geometries are often exploited in materials to embed dynamic and adaptive properties, with the use of thiocarbonyl groups as hydrogen-bonding acceptors remaining only scarcely investigated. We herein report a comparative study of C2=O and C2=S barbiturates in view of their differing hydrogen bonds, using the 5,5-disubstituted barbiturate B and the thiobarbiturate TB as model compounds. Owing to the different hydrogen-bonding strength and geometries of C2=O vs. C2=S, we postulate the formation of different hydrogen-bonding patterns in C2=S in comparison to the C2=O in conventional barbiturates. To study differences in their association in solution, we conducted concentration- and temperature-dependent NMR experiments to compare their association constants, Gibbs free energy of association ∆Gassn., and the coalescence behavior of the N-H‧‧‧S=C bonded assemblies. In Langmuir films, the introduction of C2=S suppressed 2D crystallization when comparing B and TB using Brewster angle microscopy, also revealing a significant deviation in morphology. When embedded into a hydrophobic polymer such as polyisobutylene, a largely different rheological behavior was observed for the barbiturate-bearing PB compared to the thiobarbiturate-bearing PTB polymers, indicative of a stronger hydrogen bonding in the thioanalogue PTB. We therefore prove that H-bonds, when affixed to a polymer, here the thiobarbiturate moieties in PTB, can reinforce the nonpolar PIB matrix even better, thus indicating the formation of stronger H-bonds among the thiobarbiturates in polymers in contrast to the effects observed in solution.

Regulating the morphology and size of homopolypeptide self-assemblies via selective solvents

It remains a great challenge to control the morphology and size of self-assembled homopolypeptide aggregates. In this work, rod-like micelles including spindles and cylinders were prepared by a solution self-assembly of poly(γ-benzyl-l-glutamate) (PBLG) homopolypeptides with different degrees of polymerization, in which their size was controlled precisely by tuning the ratio of water/methanol in selective cosolvents. The length of the rod-like micelles increased with an increasing amount of methanol in the selective cosolvents, which was confirmed using the combination of SEM, TEM and AFM. The self-assembly mechanism of PBLG in selective cosolvents was investigated by using complementary Fourier transform infrared (FT-IR), circular dichroism (CD) and low-field NMR analyses. It was found that the shrinkage and swelling of PBLG chains play important roles in the self-assembly process. The obtained results may provide a guideline for the study of regulating the assembled aggregate sizes.

Trending methods employed for polymerization induced self-assembly

Mother Nature produces a perfectly defined architecture that inspires researchers to make polymeric macromolecules for an array of functions. The present article describes recent development in the PISA to synthesize polymeric nano-objects.

Barbiturate derived amphiphilic homopolymers: synthesis, characterization, self-assembly and anticancer drug delivery

Aim: Our aim was to synthesis and characterization of amphiphilic norbornene-derived thiobarbiturate homopolymers (NDTH 1-4) for drug delivery. Methods: Ring-opening metathesis polymerization technique was used to prepare a series of homopolymers. The hydrophobicity is introduced by increasing the number of carbon chains ([-CH₂-]_n; n = 1, 2, 3 & 4) in between norbornene backbone and thiobarbiturate species. Results: These vesicular aggregates have been used as anticancer Doxorubicin drug delivery vehicles at the acidic (5.5) and physiological (7.4) pHs. Confocal laser-scanning microscopy has demonstrated that the drug-loaded vesicles are easily internalized into living cells. Conclusion: Amphiphilic norbornene-derived thiobarbiturate homopolymer assemblies showed efficient nanocarrier for effective anticancer drug delivery.

Nanobowls with controlled openings and interior holes driven by the synergy of hydrogen bonding and π-π interaction

Asymmetric nanoparticles such as nanobowls have promising potential in many fields due to their interior asymmetric cavities and specific concave structure. However, the fabrication of nanobowls and control over their openings and interior holes are still challenging. Herein we demonstrate a versatile strategy for preparing nanobowls with precisely controlled openings and interior holes based on the synergy of hydrogen bonding and π-π interaction of homopolymers. We designed and synthesized a series of amphiphilic homopolymers with an amino alcohol moiety and azobenzene pendant (poly(2-hydroxy-3-((4-(phenyldiazenyl)phenyl)amino)propyl methacrylate) (PHAzoMA)). The homopolymers can self-assemble into nanobowls due to the heterogeneous shrinkage of the preformed spheres. Upon increasing the molecular weight of the homopolymers from 10.1 to 76.9 kg mol-1, the sizes of the openings of nanobowls can be precisely controlled from 242 to 423 nm with a linear relationship as a result of the enhancement of the hydrogen bonding and π-π interaction between homopolymer chains. Overall, we have prepared finely controlled nanobowls by the synergy of non-covalent interactions such as hydrogen bonding and π-π interaction of polymers, which opens a new avenue for the preparation of asymmetric nanoparticles.

Synthesis of Norbornene Derived Helical Copolymer by Simple Molecular Marriage Approach to Produce Smart Nanocarrier

A novel library of norbornene derived helical copolymer has been synthesized through the coupling of two homopolymers via Molecular Marriage Approach. The helicity is governed by the non-covalent interactions like hydrogen bonding, π-π stacking and the influence of hydrophobic and hydrophilic motifs. The detailed characterization of the copolymer (Copoly 1) has been provided and the super structures are confirmed through dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The observed size of the aggregates was about 200 nm. The density functional theory (DFT) is favorably supported for the formation of proposed structure of Copoly 1. Circular dichroism (CD) measurement has confirmed the one handed helical structure of the copolymer. Reservoir capability of this pH responsive polymer (Copoly 1) to encapsulate anti-cancer drug doxorubicin (DOX) warrants its potential applications in the field of bio-medical sciences.

VR, Sathyan A, Shunmugam R. An efficient method to prepare a new class of regioregular graft copolymer via a click chemistry approach

Herein, we report the synthesis of a novel regioregular poly-norbornene anhydride-g-(3-hexyl thiophene) (PNBA-g-PHT) graft copolymer.

Self-assemblies of amphiphilic homopolymers: synthesis, morphology studies and biomedical applications

The need for a simplified access to supramolecular assemblies with enhanced tenability has led to the development of amphiphilic homopolymers (APHPs). This review highlights recent advances and future trends in APHP design, self-assembly, and biomedical applications.

Increased bioavailability of rifampicin from stimuli-responsive smart nano carrier

Stimuli responsive polymeric nanocarrier (RCOP-2) functionalized with frontline antituberculosis drug (Rifampicin) is demonstrated for sustained release. Bioavailability of Rifampicin is taken care of by conjugating this drug through a acylhydrazine linker to the polymeric backbone. The poly(ethylene glycol) structural motif is introduced in the copolymer architecture for water solubility. Releasing retinal along with Rifampicin is hypothesized to reduce the risk of side effects due to Rifampicin. The self-assembly of RCOP-2, due to the amphiphilicity present in the copolymer, is explored in detail. The pH responsiveness of RCOP-2 is demonstrated in mild acidic environment as well as in cell lines. The 4T cell line, due to its acidic nature, shows time-dependent cellular internalization. On the basis of the results, our unique design is expected to provide an increased bioavalaibility of Rifampicin with reduced side effects. From the flow cytometry results on A549 cell lines, it is clear that the newly designed copolymer RCOP-2 can internalize efficiently and serve as an effective Rifampicin delivery system.