Detecting single porphyrin molecules in a conically shaped synthetic nanopore

Recent advances of electrochemical and optical point-of-care biosensors for detecting neurotransmitter serotonin biomarkers

Since its discovery in 1984, the monoamine serotonin (5-HT) has been recognized for its critical role as a neuromodulator in both the central and peripheral nervous systems. Recent research reveals that serotonin also significantly influences various neuronal activities. Historically, it was believed that peripheral serotonin, produced by tryptophan hydroxylase in intestinal cells, functioned primarily as a hormone. However, new insights have expanded its known roles, necessitating advanced detection methods. Biosensors have emerged as indispensable tools in biomedical diagnostics, enabling the rapid and minimally invasive detection of target analytes with high spatial and temporal resolution. This review summarizes the progress made in the past decade in developing optical and electrochemical biosensors for serotonin detection. We evaluate various sensing strategies that optimize performance in terms of detection limits, sensitivity, and specificity. The study also explores recent innovations in biosensing technologies utilizing surface-modified electrodes with nanomaterials, including gold, graphite, carbon nanotubes, and metal oxide particles. Applications range from in vivo studies to chemical imaging and diagnostics, highlighting future prospects in the field.

Local electroneutrality breakdown for electrolytes within varying-section nanopores

We determine the local charge dynamics of a [Formula: see text] electrolyte embedded in a varying-section channel. By means of an expansion based on the length scale separation between the axial and transverse direction of the channel, we derive closed formulas for the local excess charge for both, dielectric and conducting walls, in 2D (planar geometry) as well as in 3D (cylindrical geometry). Our results show that, even at equilibrium, the local charge electroneutrality is broken whenever the section of the channel is not homogeneous for both dielectric and conducting walls as well as for 2D and 3D channels. Interestingly, even within our expansion, the local excess charge in the fluid can be comparable to the net charge on the walls. We critically discuss the onset of such local electroneutrality breakdown in particular with respect to the correction that it induces on the effective free energy profile experienced by tracer ions.

Elucidating the Shape of Current Transients in Electrochemical Resistive-Pulse Sensing of Single Liposomes

Electrochemical resistive-pulse (ERP) sensing with conductive carbon nanopipettes (CNPs) has recently been developed and employed for the detection of single liposomes and biological vesicles, and for the analysis of redox molecules contained in such vesicles. However, the origins of different shapes of current transients produced by the translocation of single vesicles through the CNP remain poorly understood. Herein, we report extensive finite-element simulations of both portions of an ERP transient, the current blockage by a vesicle approaching and passing through the pipet orifice and the faradaic current spike due to oxidation/reduction of redox species released from a vesicle on the carbon surface, for different values of parameters defining the geometry and dynamics of the vesicle/CNP system. The effects of the pipet geometry, surface charge, transport, vesicle trajectory, and collision location on the shape of current transients are investigated. The possibility of quantitative analysis of experimental ERP transients produced by translocations of liposomes and extracellular vesicles by fitting them to simulated curves is demonstrated. The developed theory can enable a more reliable interpretation of complicated ERP signals and characterization of the size and contents of single biological and artificial vesicles.

Closed Formula for Transport across Constrictions

In the last decade, the Fick-Jacobs approximation has been exploited to capture transport across constrictions. Here, we review the derivation of the Fick-Jacobs equation with particular emphasis on its linear response regime. We show that, for fore-aft symmetric channels, the flux of noninteracting systems is fully captured by its linear response regime. For this case, we derive a very simple formula that captures the correct trends and can be exploited as a simple tool to design experiments or simulations. Lastly, we show that higher-order corrections in the flux may appear for nonsymmetric channels.

Chiral Transport in Nanochannel Based Artificial Drug Transporters

The precise regulation of chiral drug transmembrane transport can be achieved through drug transporters in living organisms. However, implementing this process in vitro is still a formidable challenge due to the complexity of the biological systems that control drug enantiomeric transport. Herein, a facile and feasible strategy is employed to construct chiral L-tyrosine-modified nanochannels (L-Tyr nanochannels) based on polyethylene terephthalate film, which could enhance the chiral recognition of propranolol isomers (R-/S-PPL) for transmembrane transport. Moreover, conventional fluorescence spectroscopy, patch-clamp technology, laser scanning confocal microscopy, and picoammeter technology are employed to evaluate the performance of nanochannels. The results show that the L-Tyr nanochannel have better chiral selectivity for R-/S-PPL compared with the L-tryptophan (L-Trp) channel, and the chiral selectivity coefficient is improved by about 4.21-fold. Finally, a detailed theoretical analysis of the chirality selectivity mechanism is carried out. The findings would not only enrich the basic theory research related to chiral drug transmembrane transport, but also provide a new idea for constructing artificial channels to separate chiral drugs.

Gating with Charge Inversion to Control Ionic Transport in Nanopores

Multivalent ions modify the properties of the solid/liquid interfaces, and in some cases, they can even invert the polarity of surface charge, having large consequences for separation processes based on charge. The so-called charge inversion is observed as a switch from negative surface charge in monovalent salts, e.g., KCl, to effective positive surface charge in multivalent salts that is possible through a strong accumulation and correlation of the multivalent ions at the surface. It is not known yet, however, whether the density of the positive charge induced by charge inversion depends on the pore opening diameter, especially in extreme nanoconfinement. Here, we probe how the effective surface charge induced by charge inversion is influenced by the pore opening diameter using a series of nanopores with an opening between 4 and 25 nm placed in contact with trivalent chromium ions in tris(ethylenediamine)chromium(III) sulfate at different concentrations. Our results suggest that the effective positive charge density can indeed be modified by nanoconfinement to the extent that is dependent on the pore diameter, salt concentration, and applied voltage. In addition, the correlated ions can increase the transmembrane current in nanopores with an opening diameter down to 10 nm and cause a significant blockage of the current for narrower pores. The results provide guidelines to control ionic transport at the nanoscale with multivalent ions and demonstrate that in the same experimental conditions, differently sized pores in the same porous material can feature different surface charge density and possibly ion selectivity.

Dual-Nanopipettes for the Detection of Single Nanoparticles and Small Molecules

Nanopore sensing is blooming due to its label-free and high sensitivity features. As a novel nanopore, a droplet is formed at the orifice of a dual-nanopipette, which allows for the translocation of analytes through the two channels at a relatively low speed and the promotion of signal-to-noise ratio. However, nanopore sensing based on the principle of current blockage requires the pore size to be comparable to that of the single entity, which poses a huge challenge for the direct detection of small molecules. In this work, gold nanoparticles (Au NPs) modified with sulfhydryl poly(ethylene glycol) (PEG-SH) or aptamers were detected successfully. The size difference of Au NPs and the interaction between Au NPs and dual-nanopipettes could be distinguished sensitively. Furthermore, Au NPs modified with designed aptamers will produce different blocking current after capturing the corresponding small molecules (e.g., dopamine and serotonin). Even non-electroactive ions, such as potassium ions, can also be detected, which is difficult to sense based on redox reactions, and further illustrates that the change of surface properties of nanoparticles is responsible for the detection. This work expands the application of nanopipette sensing for Au NPs and provides a universal platform for the small-molecule detection, which has the potential application in biosensing.

Understanding and modelling the magnitude of the change in current of nanopore sensors

Nanopores are promising sensing devices that can be used for the detection of analytes at the single molecule level. It is of importance to understand and model the current response of a nanopore sensor for improving the sensitivity of the sensor, a better interpretation of the behaviours of different analytes in confined nanoscale spaces, and quantitative analysis of the properties of the targets. The current response of a nanopore sensor, usually called a resistive pulse, results from the change in nanopore resistance when an analyte translocates through the nanopore. This article reviews the theoretical models used for the calculation of the resistance of the nanopore, and the corresponding change in nanopore resistance due to a translocation event. Models focus on the resistance of the pore cavity region and the access region of the nanopore. The influence of the sizes, shapes and surface charges of the translocating species and the nanopore, as well as the trajectory that the analyte follows are also discussed. This review aims to give a general guidance to the audience for understanding the current response of a nanopore sensor and the application of this class of sensor to a broad range of species with the theoretical models.

Key Parameters That Determine the Magnitude of the Decrease in Current in Nanopore Blockade Sensors

Nanopore blockade sensors were developed to address the challenges of sensitivity and selectivity for conventional nanopore sensors. To date, the parameters affecting the current of the sensor have not been elucidated. Herein, the impacts of nanopore size and charge and the shape, size, surface charge, and aggregation state of magnetic nanoparticles were assessed. The sensor was tolerant to all parameters contrary to predictions from electronic or geometric arguments on the current change. Theoretical models showed the greater importance of the polymers around nanoparticles and the access resistance of nanopores to the current, when compared with translocation-based nanopore sensors. The signal magnitude was dominated by the change in access resistance of ∼4.25 MΩ for all parameters, resulting in a robust system. The findings provide understandings of changes in current when nanopores are blocked, like in RNA trapping or nanopore blockade sensors, and are important for designing sensors based on nanopore blockades.

Single-Molecule Binding Assay Using Nanopores and Dimeric NP Conjugates

The ability to measure biomarkers, both specifically and selectively at the single-molecule level in biological fluids, has the potential to transform the diagnosis, monitoring, and therapeutic intervention of diseases. The use of nanopores has been gaining prominence in this area, not only for sequencing but more recently in screening applications. The selectivity of nanopore sensing can be substantially improved with the use of labels, but substantial challenges remain, especially when trying to differentiate between bound from unbound targets. Here highly sensitive and selective molecular probes made from nanoparticles (NPs) that self-assemble and dimerize upon binding to a biological target are designed. It is shown that both single and paired NPs can be successfully resolved and detected at the single-molecule nanopore sensing and can be used for applications such as antigen/antibody detection and microRNA (miRNA) sequence analysis. It is expected that such technology will contribute significantly to developing highly sensitive and selective strategies for the diagnosis and screening of diseases without the need for sample processing or amplification while requiring minimal sample volume.

Conical Nanotubes Synthesized by Atomic Layer Deposition of Al2O3, TiO2, and SiO2 in Etched Ion-Track Nanochannels

Etched ion-track polycarbonate membranes with conical nanochannels of aspect ratios of ~3000 are coated with Al₂O₃, TiO₂, and SiO₂ thin films of thicknesses between 10 and 20 nm by atomic layer deposition (ALD). By combining ion-track technology and ALD, the fabrication of two kinds of functional structures with customized surfaces is presented: (i) arrays of free-standing conical nanotubes with controlled geometry and wall thickness, interesting for, e.g., drug delivery and surface wettability regulation, and (ii) single nanochannel membranes with inorganic surfaces and adjustable isoelectric points for nanofluidic applications.

Nanodiagnostics: A review of the medical capabilities of nanopores

Modern diagnostics strive to be accurate, fast, and inexpensive in addition to properly identifying the presence of a disease, infection, or illness. Early diagnosis is key; catching a disease in its early stages can be the difference between fatality and treatment. The challenge with many diseases is that detectability of the disease scales with disease progression. Since single molecule sensors, e.g., nanopores, can sense biomolecules at low concentrations, they have the potential to become clinically relevant in many of today's medical settings. With nanopore-based sensing, lower volumes and concentrations are required for detection, enabling it to be clinically beneficial. Other advantages to using nanopores include that they are tunable to an enormous variety of molecules and boast low costs, and fabrication is scalable for manufacturing. We discuss previous reports and the potential for incorporating nanopores into the medical field for early diagnostics, therapeutic monitoring, and identifying relapse/recurrence.

Nanopore-Based Electrodes for Quinotrione Detection: Host-Guest-Induced Electrochemical Signal Switching

Nanopore-based detection techniques, with a wide range of transport properties, exhibit impressive selectivity and sensitivity for analytes. To expand the application of nanoporous sensors, real-time and fast detection of targets, all within a portable device, is highly desired for nanopore-based sensors. In addition, to improve the accuracy of the output signal, more appropriate readout methods also need to be explored. In this manuscript, we describe a nanopore-based electrode, regarded as NAC-P6-PC@AuE, prepared by coupling a pillararene-based nanoporous membrane with an electrochemical impedance measurement method. The fabricated device is demonstrated by exposing pillararene-based receptors to trace amounts of pesticide molecules. NAC-P6-PC@AuE devices exhibit distinguished selectivity to quinotrione, as well as the ability to quantify quinotrione with a limit of quantitation (LOQ) of 10 nM. The mechanism that allows sensing was verified using finite-element simulations and may be explained as host-guest-induced surface charge shielding, which influences the electrochemical response of probe molecules. The applications of this nanopore-based electrode may be extended toward other target molecules by decorating the nanopore surfaces with specifically chosen receptors.

Measuring trapped DNA at the liquid-air interface for enhanced single molecule sensing

Nanopore sensing is a promising tool with widespread application in single-molecule detection. Borosilicate glass nanopores are a viable alternative to other solid-state nanopores due to low noise and cost-efficient fabrication. For dielectric materials, including borosilicate glass, the capacitive noise is one of the major contributors to noise, which depends on the wall thickness and the surface area submerged in an ionic solution. Here, we investigated the root mean square (I_RMS) noise and ionic conductance for borosilicate nanopores in different depths (i.e., tip submersion depth) ranging from the solution surface (assumed to be zero) to 5000 μm. Our findings demonstrate a decrease in I_RMS noise as the pipette moves toward the surface. We further demonstrate that borosilicate nanopores can detect single lambda DNA (λ-DNA) molecules with a high signal-to noise ratio close to the liquid-air interface. Specifically, our results indicate a higher signal to noise ratio as the submersion depth is reduced owing to the reduced surface area and thus capacitive noise. Further, our experimental results show higher DNA capture frequency at the air-water interface due to a combined effect of evaporation and an evaporation-induced thermal gradient at the surface. Therefore, our findings demonstrate that borosilicate glass nanopores are suitable for studying interfacial concentration gradients of molecules, specifically DNA, with a higher signal to noise.

Transport of neutral and charged nanorods across varying-section channels

We study the dynamics of neutral and charged rods embedded in varying-section channels. By means of systematic approximations, we derive the dependence of the local diffusion coefficient on both the geometry and charge of the rods. This microscopic insight allows us to provide predictions for the permeability of varying-section channels to rods with diverse lengths, aspect ratios and charge. Our analysis shows that the dynamics of charged rods is sensitive to the geometry of the channel and that their transport can be controlled by tuning both the shape of the confining walls and the charge of the rod. Interestingly, we find that the channel permeability does not depend monotonically on the charge of the rod. This opens the possibility of a novel mechanism to separate charged rods.

Aptamer Conformational Change Enables Serotonin Biosensing with Nanopipettes

We report artificial nanopores in the form of quartz nanopipettes with ca. 10 nm orifices functionalized with molecular recognition elements termed aptamers that reversibly recognize serotonin with high specificity and selectivity. Nanoscale confinement of ion fluxes, analyte-specific aptamer conformational changes, and related surface charge variations enable serotonin sensing. We demonstrate detection of physiologically relevant serotonin amounts in complex environments such as neurobasal media, in which neurons are cultured in vitro. In addition to sensing in physiologically relevant matrices with high sensitivity (picomolar detection limits), we interrogate the detection mechanism via complementary techniques such as quartz crystal microbalance with dissipation monitoring and electrochemical impedance spectroscopy. Moreover, we provide a novel theoretical model for structure-switching aptamer-modified nanopipette systems that supports experimental findings. Validation of specific and selective small-molecule detection, in parallel with mechanistic investigations, demonstrates the potential of conformationally changing aptamer-modified nanopipettes as rapid, label-free, and translatable nanotools for diverse biological systems.

Effects of cone angle and length of nanopores on the resistive pulse quality

Resistive pulse sensing (RPS) has proved to be a viable method for the detection and characterization of micro and nano particles. Modern fabrication methods have introduced different nanopore geometries for resistive pulse sensors. In this paper, we have numerically studied the effects of membrane thickness and the pore's cone angle, as the main geometrical parameters, on the sensing performance of the nanopores used for nanoparticle detection in the resistive pulse sensing method. To compare the sensing performance, three resistive pulse quality parameters were investigated - sensitivity, pulse duration and pulse amplitude. The thorough investigation on the relations between the geometrical parameters and the pulse quality parameters produced several interesting results, which were categorized and summarized for different nanopore structures (as different nanopore platforms) enabling the readers to more effectively compare them with one another. The results revealed that large cone angle and low aspect ratio nanopores have higher pulse amplitude and sensitivity, but their low duration could be a challenge in the process of detecting the resistive pulse. In addition, our results show small variation in sensitivity and duration of large cone angle nanopores with respect to pore length change, which is explained using the effective length concept and the definition of electric field strength and length. The findings of the present work can be used in practical applications where choosing the optimal pore geometry is of crucial significance. Furthermore, the results provide several possible ways to improve the resistive pulse quality for better sensing performance.

Machine Learning to Improve the Sensing of Biomolecules by Conical Track-Etched Nanopore

Single nanopore is a powerful platform to detect, discriminate and identify biomacromolecules. Among the different devices, the conical nanopores obtained by the track-etched technique on a polymer film are stable and easy to functionalize. However, these advantages are hampered by their high aspect ratio that avoids the discrimination of similar samples. Using machine learning, we demonstrate an improved resolution so that it can identify short single- and double-stranded DNA (10- and 40-mers). We have characterized each current blockade event by the relative intensity, dwell time, surface area and both the right and left slope. We show an overlap of the relative current blockade amplitudes and dwell time distributions that prevents their identification. We define the different parameters that characterize the events as features and the type of DNA sample as the target. By applying support-vector machines to discriminate each sample, we show accuracy between 50% and 72% by using two features that distinctly classify the data points. Finally, we achieved an increased accuracy (up to 82%) when five features were implemented.

Wafer-level fabrication of individual solid-state nanopores for sensing single DNAs

For biomolecule sensing purposes a solid-state nanopore platform based on silicon has certain advantages as compared to nanopores on other substrates such as graphene, silicon nitride, silicon oxide etc Capitalizing on the developed CMOS technology, nanopores on silicon are scalable without any requirement for additional processing, the devices are low cost and the process can be repeatable with a high yield. One of the essential requirements in biomolecule sensing is the ability of the nanopore to interact with the analyte. In this work, we present a method for processing high aspect ratio, single nanopores in the range of 10-30 nm in diameter and approximately 700 nm in length on a silicon-on-insulator (SOI) wafer. The presented method of manufacturing the high aspect ratio individual nanopores combines optical lithography and anisotropic KOH etching with a final electrochemical etching step to form the nanopores and is repeatable and can be processed in batches. We demonstrate electrical detection of dsDNA translocation, where the characteristic time of the process is in the millisecond range. We also analyse the translocation parameters and correlate the enhanced length of the nanopore to a longer translocation time as compared to other substrates.

The double life of conductive nanopipette: a nanopore and an electrochemical nanosensor

The continuing interest in nanoscale research has spurred the development of nanosensors for liquid phase measurements. These include nanopore-based sensors typically employed for detecting nanoscale objects, such as nanoparticles, vesicles and biomolecules, and electrochemical nanosensors suitable for identification and quantitative analysis of redox active molecules. In this Perspective, we discuss conductive nanopipettes (CNP) that can combine the advantages of single entity sensitivity of nanopore detection with high selectivity and capacity for quantitative analysis offered by electrochemical sensors. Additionally, the small physical size and needle-like shape of a CNP enables its use as a tip in the scanning electrochemical microscope (SECM), thus, facilitating precise positioning and localized measurements in biological systems.

Self-supporting hybrid silica membranes with controlled porous architectures

Transferrable, self-supporting membranes with controlled and ordered pore architectures have been developed for potential applications in the fields of filtration, sensing, separation and catalysis.

Peptide Nanocarriers for Detection of Heavy Metal Ions Using Resistive Pulse Sensing

The use of nanocarriers within resistive pulse sensing facilitates the detection and quantification of analytes. To date the field has been dominated by polyionic carriers or nanomaterials. Together they combine the recognition elements of a ligand with a stable support, facilitating the sample handling, analysis times, and multiplex detection. Here we develop the use of peptide-functionalized superparamagnetic nanocarriers to extract and quantify metal ions in solution. The interaction between nickel and the peptide ligand is measured as a change in translocation velocity of the carrier. The magnitude of change is proportional to the concentration of the metal ions in solution. Unlike DNA aptamers where a change in the tertiary structure and the folding of the polyanionic backbone influences the carrier velocity, the peptides here had a lower net charge under the assay conditions. To try and enhance the signal we engineered charged groups within the peptide to explore the effects on the signal. In all cases the metal ion binding dominated the velocity of the carrier. The assay was shown to work across 3 orders of magnitude and can detect Ni²⁺ in the presence of some other heavy metal ions. We demonstrate this by quantifying Ni²⁺ in both tap and pond water. The work allows for future multiplexed sensing strategies using both peptides and DNA aptamers in resistive pulse sensors.

Observing Transient Bipolar Electrochemical Coupling on Single Nanoparticles Translocating through a Nanopore

We report the observation of transient bipolar electrochemical coupling on freely moving 40 nm silver nanoparticles. The use of an asymmetric nanoelectrochemical environment at the nanopore orifice, for example, an acid inside the pipette and halide ions in the bulk, enabled us to observe unusually large current blockages of single Ag nanoparticles. We attribute these current blockages to the formation of H₂ nanobubbles on the surface of Ag nanoparticles due to the coupled faradaic reactions, in which the reduction of protons and water is coupled to the oxidation of Ag and water under potentials higher than 1 V. The appearance of large current blockages was strongly dependent on the applied voltage and the choice of anions in the bulk solution. The correlation between large current blockages with the oxidation of Ag nanoparticles and their nanopore translocation was further supported by simultaneous fluorescence and electric recordings. This study demonstrates that transient bipolar electrochemistry can take place on small metal nanoparticles below 50 nm when they pass through nanopores where the electric field is highly localized. The use of a nanopore and the resistive-pulse sensing method to study transient bipolar electrochemistry of nanoparticles may be extended to future studies in ultrafast electrochemistry, nanocatalyst screening, and gas nucleation on nanoparticles.

FIB-Milled Quartz Nanopores in a Sealed Nanopipette

We report the use of laser-pulled quartz nanopipettes as a new platform for microfabricated nanopores. A quartz nanopipette is prepared on a laser puller and sealed closed prior to focused-ion beam (FIB) milling. A quartz nanopore can then be FIB-milled into the side walls of the sealed pipette and used to analyze single nanoparticles. This method is fast, reproducible and creates nearly cylindrical nanopores in ultrathin quartz walls with controllable diameter down to 66 nm. Both pore size and wall thickness can be readily controlled in the FIB milling process by adjusting milling parameters and milling at different locations along the pipette walls. FIB-milled quartz nanopores combine the advantages of the pipette pores and silicon chip-based membrane pores into one device while avoiding many of the challenges of two popular nanopore devices. First, they can be used as a handheld probe device like a quartz pipette. Second, the use of an ultrathin quartz membrane gives them superior electric property enabling low noise recording at a higher bandwidth and a highly focused sensing zone located at a farther distance away from the highly restricted tip region. The inner and outer diameters of the resulting pore can be precisely measured using scanning electron microscopy (SEM). As an application, FIB-milled side nanopores are used to study translocation of polystyrene nanoparticles. In addition to studying the dependence of translocation time on the pore length, we demonstrate detection of nanoparticles in parallel nanopores of different lengths and use finite-element simulation to confirm the identity of the two resulting populations. Our results show that FIB-milled side nanopores are a useful platform for future analytical applications like studying nanoparticle translocation dynamics.

Scalable fabrication of sub-10 nm polymer nanopores for DNA analysis

We present the first fabrication of sub-10 nm nanopores in freestanding polymer membranes via a simple, cost-effective, high-throughput but deterministic fabrication method. Nanopores in the range of 10 nm were initially produced via a single-step nanoimprinting process, which was further reduced to sub-10 nm pores via a post-NIL polymer reflow process. The low shrinkage rate of 2.7 nm/min obtained under the conditions used for the reflow process was the key to achieving sub-10 nm pores with a controllable pore size. The fabricated SU-8 nanopore membranes were successfully employed for transient current measurements during the translocation of DNA molecules through the nanopores.

Scalable fabrication of nanopores in membranes via thermal annealing of Au nanoparticles

Nanopores are promising candidates for versatile sensing of micro- and nanomaterials. However, the fabrication of isolated nanopores with optimal dimensions and distributions requires complex processes that involve the use of high-cost equipment. Herein, we report a scalable fabrication of isolated conical nanopores with adjustable dimensions and distribution densities on a Si₃N₄ membrane via thermal annealing of Au nanoparticles (AuNPs). The AuNP-dispersed solution was dropped and evaporated on the membrane, while the pH value and concentration of AuNPs controlled the zeta potential difference and the distribution density of the attached AuNPs. The optimized thermal annealing directly fabricated conical nanopores at the positions of the AuNPs because of the quasi-liquid state of the AuNPs and their interaction with the Si₃N₄ lattices. The 50, 100, and 200 nm AuNPs enabled one-step fabrication of 8-, 26-, and 63 nm nanopores, while the inter-distances and distribution densities were controllable over the membrane. The physicochemical analyses elucidated the underlying mechanisms of direct nanopore formation, and the precise adjustment of thermal annealing developed three unique nanopores that differently interacted with the AuNPs: (1) Au-residue-embedded nanopores, (2) isolated nanopores, and (3) nanopores with the remaining Au droplet. The AuNPs-driven fabrication of versatile nanopore membranes enables new applications for sensing and transporting small-scale materials.

Nanopore label-free detection of single-nucleotide deletion in Baxα/BaxΔ2

Baxα, a key tumor suppressor gene, will not be expressed correctly as a result of single nucleotide mutation in its microsatellite region; Instead, BaxΔ2, an isoform of Baxα, is often produced. In addition, lack of the exon 2 due to an alternative splicing, BaxΔ2 has the same sequence as Baxα except single base deletion from eight continuous guanines (G8) to G7. Most of the currently available methods for Bax∆2 detection are inefficient and time-consuming, and/or require the use of labels or dyes. In this work, we reported a label-free nanopore sensing strategy to differentiate between Baxα and BaxΔ2 with a DNA polymer as a molecular probe based on alternative spliced sequences. Two DNA molecules were designed to selectively detect Baxα and BaxΔ2, respectively. The method was rapid, accurate, and highly sensitive: picomolar concentrations of target nucleic acids could be detected in minutes. Our developed simple and fast nanopore-based detection strategy is not only useful for distinguishing between Baxα and Bax∆2, but also provides a useful tool for detection of other single-base mutations in genetic diagnosis.

Emerging tools for studying single entity electrochemistry

Electrochemistry studies charge transfer and related processes at various microscopic structures (atomic steps, islands, pits and kinks on electrodes), and mesoscopic materials (nanoparticles, nanowires, viruses, vesicles and cells) made by nature and humans, involving ions and molecules. The traditional approach measures averaged electrochemical quantities of a large ensemble of these individual entities, including the microstructures, mesoscopic materials, ions and molecules. There is a need to develop tools to study single entities because a real system is usually heterogeneous, e.g., containing nanoparticles with different sizes and shapes. Even in the case of "homogeneous" molecules, they bind to different microscopic structures of an electrode, assume different conformations and fluctuate over time, leading to heterogeneous reactions. Here we highlight some emerging tools for studying single entity electrochemistry, discuss their strengths and weaknesses, and provide personal views on the need for tools with new capabilities for further advancing single entity electrochemistry.

Label-Free Detection of DNA Mutations by Nanopore Analysis

Cancers are caused by mutations to genes that regulate cell normal functions. The capability to rapid and reliable detection of specific target gene variations can facilitate early disease detection and diagnosis and also enables personalized treatment of cancer. Most of the currently available methods for DNA mutation detection are time-consuming and/or require the use of labels or sophisticated instruments. In this work, we reported a label-free enzymatic reaction-based nanopore sensing strategy to detect DNA mutations, including base substitution, deletion, and insertion. The method was rapid and highly sensitive with a detection limit of 4.8 nM in a 10 min electrical recording. Furthermore, the nanopore assay could differentiate among perfect match, one mismatch, and two mismatches. In addition, simulated serum samples were successfully analyzed. Our developed nanopore-based DNA mutation detection strategy should find useful application in genetic diagnosis.

Collision and Coalescence of Single Attoliter Oil Droplets on a Pipet Nanopore

We describe the use of a quartz pipet nanopore to study the collision and coalescence of individual emulsion oil droplets and their subsequent nanopore translocation. Collision and coalescence of single toluene droplets at a nanopore orifice are driven primarily by electroosmosis and electrophoresis and lead to the fast growth of a trapped oil droplet. This results in a stepwise current response due to the coalesced oil droplet increasing its volume and its ability to partially block the nanopore's ionic current, allowing us to use the resistive-pulse method to resolve single droplet collisions. Further growth of the trapped oil droplet leads to a complete blockage of the nanopore and a nearly 100% current decay. The trapped oil droplet shows enormous mechanical stability at lower voltages and stays in its trapped status for hundreds of seconds. An increased voltage can be used to drive the trapped droplet into the pipet pore within several milliseconds. Simultaneous fluorescence imaging and amperometry were performed to examine droplet collision, coalescence, and translocation, further confirming the proposed mechanism of droplet-nanopore interaction. Moreover, we demonstrate the unique ability to perform fast voltammetric measurements on a nanopore-supported attoliter oil droplet and study its voltage-driven ion transfer processes.

Atomistic and continuum scale modeling of functionalized graphyne membranes for water desalination

Recent theoretical and experimental studies reported ultra-high water permeability and salt rejection in nanoporous single-layer graphene. However, creating and controlling the size and distribution of nanometer-scale pores pose significant challenges to application of these membranes for water desalination. Graphyne and hydrogenated graphyne have tremendous potential as ultra-permeable membranes for desalination and wastewater reclamation due to their uniform pore-distribution, atomic thickness and mechano-chemical stability. Using molecular dynamics (MD) simulations and upscale continuum analysis, the desalination performance of bare and hydrogenated α-graphyne and γ-{2,3,4}-graphyne membranes is evaluated as a function of pore size, pore geometry, chemical functionalization and applied pressure. MD simulations show that pores ranging from 20 to 50 Ų reject in excess of 90% of the ions for pressures up to 1 GPa. Water permeability is found to range up to 85 L cm^-2 day^-1 MPa^-1, which is up to three orders of magnitude larger than commercial seawater reverse osmosis (RO) membranes and up to ten times that of nanoporous graphene. Pore chemistry, functionalization and geometry are shown to play a critical role in modulating the water flux, and these observations are explained by water velocity, density, and energy barriers in the pores. The atomistic scale investigations are complemented by upscale continuum analysis to examine the performance of these membranes in application to cross-flow RO systems. This upscale analysis, however, shows that the significant increase in permeability, observed from MD simulations, does not fully translate to current RO systems due to transport limitations. Nevertheless, upscale calculations predict that the higher permeability of graphyne membranes would allow up to six times higher permeate recovery or up to 6% less energy consumption as compared to thin-film composite membranes at currently accessible operating conditions. Significantly higher energy savings and permeate recovery can be achieved if higher feed-flow rates can be realized.

Single Nanochannel-Aptamer-Based Biosensor for Ultrasensitive and Selective Cocaine Detection

Ultrasensitive and selective detection of molecules at nano or sub-nanomolar level is very important for many areas such as early diagnosis and drug testing. Herein, we report a high-sensitive cocaine sensor based on a single nanochannel coupled with DNA aptamers. The single nanochannel-aptamer-based biosensor can recognize cocaine molecules with an excellent sensitivity and good selectivity. A linear relationship between target cocaine concentration and output ionic current is obtained in a wide concentration range of cocaine from 1 nM to 10 μM. The cocaine sensor also shows a detection limit down to 1 nM. This study provides a new avenue to develop new nanochannel-aptamer-based biosensors for rapid and ultratrace detection of a variety of illicit drugs.

Three-Dimensional Super-resolution Imaging of Single Nanoparticles Delivered by Pipettes

Controlled three-dimensional positioning of nanoparticles is achieved by delivering single fluorescent nanoparticles from a nanopipette and capturing them at well-defined regions of an electrified substrate. To control the position of single nanoparticles, the force of the pressure-driven flow from the pipette is balanced by the attractive electrostatic force at the substrate, providing a strategy by which nanoparticle trajectories can be manipulated in real time. To visualize nanoparticle motion, a resistive-pulse electrochemical setup is coupled with an optical microscope, and nanoparticle trajectories are tracked in three dimensions using super-resolution fluorescence imaging to obtain positional information with precision in the tens of nanometers. As the particles approach the substrate, the diffusion kinetics are analyzed and reveal either subdiffusive (hindered) or superdiffusive (directed) motion depending on the electric field at the substrate and the pressure-driven flow from the pipette. By balancing the effects of the forces exerted on the particle by the pressure and electric fields, controlled, real-time manipulation of single nanoparticle trajectories is achieved. The developed approach has implications for a variety of applications such as surface patterning and drug delivery using colloidal nanoparticles.

Sequence-Specific Detection of MicroRNAs Related to Clear Cell Renal Cell Carcinoma at fM Concentration by an Electroosmotically Driven Nanopore-Based Device

MicroRNAs (miRs) are small noncoding RNAs that play a critical role in gene regulation. Recently, traces of cancer-related miRs have been identified in body fluids, which make them remarkable noninvasive biomarkers. In this study, a new nanopore-based detection scheme utilizing a borosilicate micropipette and an assay of complementary γ-peptide nucleic acid (γ-PNA) probes conjugated to polystyrene beads have been reported for the detection of miR-204 and miR-210 related to the clear cell Renal Cell Carcinoma (ccRCC). Electroosmotic flow (EOF) is induced as the driving force to transport PNA-beads harboring target miRs to the tip of the pore (sensing zone), which results in pore blockades with unique and easily distinguishable serrated shape electrical signals. The concentration detection limit is investigated to be 1 and 10 fM for miR-204 and miR-210, respectively. The EOF transport mechanism enables highly sensitive detection of molecules with low surface charge density with 97.6% detection accuracy compared to the conventional electrophoretically driven methods. Furthermore, resistive-pulse experiments are conducted to study the correlation of the particles' surface charge density with their translocation time and verify the detection principle.

Resistive-pulse and rectification sensing with glass and carbon nanopipettes

Along with more prevalent solid-state nanopores, glass or quartz nanopipettes have found applications in resistive-pulse and rectification sensing. Their advantages include the ease of fabrication, small physical size and needle-like geometry, rendering them useful for local measurements in small spaces and delivery of nanoparticles/biomolecules. Carbon nanopipettes fabricated by depositing a thin carbon layer on the inner wall of a quartz pipette provide additional means for detecting electroactive species and fine-tuning the current rectification properties. In this paper, we discuss the fundamentals of resistive-pulse sensing with nanopipettes and our recent studies of current rectification in carbon pipettes.

Ultra-sensitive detection of ibuprofen (IBP) by electrochemical aptasensor using the dendrimer-quantum dot (Den-QD) bioconjugate as an immobilization platform with special features

This study describes a high-performance electrochemical aptasensor which is employed to detect Ibuprofen (IBP) as a painkiller drug by using a novel platform as an integrated sensing interface. In order to make the aptasensor, the Den-QD bioconjugate was immobilized on the surface of a GC electrode and followed the Apt was incubated on this surface. The incubation of the IBP on the aptasensor surface and the formation of the Apt/IBP complex, led to a hindered electron transfer reaction on the sensing surface, which decreased the peak current of the redox probe. Under the optimum condition, the assay had two dynamic ranges with a detection limit down to 333fM. The developed aptasensor reliably detects IBP in a real sample. Our results demonstrated that the proposed strategy has many advantages and the Den-QD bioconjugate may become a promising nanocomposite for the electrochemical sensing applications.