Supramolecular porphyrin polymers in solution and at the solid-liquid interface

Chiral diketopyrrolo[3,4-c]pyrrole-based oligothiophenes: Synthesis and characterization of aggregated states in solution and thin films

In this work, we synthesized a family of three structurally related chiral oligothiophenes containing a 1,4-diketo-3,6-diarylpyrrolo[3,4-c]pyrrole (DPP) unit as the central core; functionalized with the same (S)-3,7-dimethyl-1-octyl chains on the nitrogen atoms of lactam moieties, they only differ in the number of lateral thiophene units. The aggregation modes of these π-conjugated chiral systems were evaluated by means of UV-Vis absorption and ECD spectroscopies in conditions of solution aggregation (CHCl3 /MeOH mixtures) and as thin films, describing in particular the impact of the π-conjugation length on the chiroptical properties. Interestingly, we found that the variable number of thiophene units attached to the DPP core affects not only the propensity to aggregation but also the aggregates' helicity. ECD revealed information about the supramolecular arrangement of these molecules, that one would not obtain by using conventional optical spectroscopy and microscopy techniques. Thin film samples revealed very different aggregation modes with respect to solution aggregates, casting doubts on the common assumption that these latter may serve as simple models of the former ones.

Porphyrin-based supramolecular polymers

Porphyrin derivatives are ubiquitous in bio-organisms and are associated with proteins that play important biological roles, such as oxygen transport, photosynthesis, and catalysis. Porphyrins are very fascinating research objects for chemists, physicists, and biologists owing to their versatile chemical and physical properties. Porphyrin derivatives are actively used in various fields, such as molecular recognition, energy conversion, sensors, biomedicine, and catalysts. Porphyrin derivatives can be used as building blocks for supramolecular polymers because their primitive structures have C₄ symmetry, which allows for the symmetrical introduction of self-assembling motifs. This review describes the fabrication of porphyrin-based supramolecular polymers and novel discoveries in supramolecular polymer growth. First, we summarise the (i) design concepts, (ii) growth mechanism and (iii) analytical methods of porphyrin-based supramolecular polymers. Then, the examples of porphyrin-based supramolecular polymers formed by (iv) hydrogen bonding, (v) metal coordination-based interaction, (vi) host-guest complex formation, and (vii) others are summarised. Finally, (viii) applications and perspectives are discussed. Although supramolecular polymers, in a broad sense, can include either two-dimensional (2D) networks or three-dimensional (3D) porous polymer structures; this review mainly focuses on one-dimensional (1D) fibrous supramolecular polymer structures.

Helicity Modulation in NIR-Absorbing Porphyrin-Ryleneimides

Peripheral substitution of a π-extended porphyrin with bulky groups produces a curved chromophore with four helical stereogenic units. The curvature and stereochemistry of such porphyrins can be controlled by varying the substituents, coordinated metal ions, and apical ligands. In particular, when the achiral saddle-shaped free bases are treated with large metal ions, i.e., CdII or HgII , the resulting complexes convert to chiral propeller-like configurations. X-ray diffraction analyses show that apical coordination of a water molecule is sufficient to induce a notable bowl-like distortion of the cadmium complex, which however retains its chiral structure. For phenyl- and tolyl-substituted derivatives, the conversion is thermodynamically controlled, whereas complexes bearing bulky 4-(tert-butyl)phenyl groups transform into their chiral forms upon heating. In the latter case, the chiral Hg porphyrin was converted into the corresponding free base and other metal complexes without any loss of configurational purity, ultimately providing access to stable, enantiopure porphyrin propellers.

Solvent-directed formation of helically twisted stacking constructs via self-assembly of tris(phenylisoxazolyl)benzene dimers

Ureido-pyrimidinone (UPy)-appended tris(phenylisoxazolyl)benzenes were synthesized. The UPy moieties of the tris(phenylisoxazolyl)benzenes stably formed self-complementary dimers in solution. The dimers self-assembled to form helically twisted stacking constructs in a process driven by π-π stacking interactions of UPy dimer moieties and dipole-dipole interactions of isoxazole units. Strong association affinity was seen within the stacking constructs compared with the previously reported isoxazole derivatives owing to the auxiliary π-π stacking interaction. Notably, tris(phenylisoxazolyl)benzenes showed an environmentally responsive nature. The absorption bands, emission intensities, and sizes of ensembles depended significantly on the mixing ratio of CHCl₃ and methylcyclohexane (MCH). Additionally, sharp on-off switching phenomena were seen in their circular dichroism (CD) and circularly polarized luminescence (CPL) spectra in response to the mixing ratio of CHCl₃ and MCH. CD and CPL were activated only at a certain mixing ratio of CHCl₃/MCH, thus showing potential for the creation of molecular sensors.

Pathway Complexity in Supramolecular Porphyrin Self-Assembly at an Immiscible Liquid-Liquid Interface

Nanostructures that are inaccessible through spontaneous thermodynamic processes may be formed by supramolecular self-assembly under kinetic control. In the past decade, the dynamics of pathway complexity in self-assembly have been elucidated through kinetic models based on aggregate growth by sequential monomer association and dissociation. Immiscible liquid–liquid interfaces are an attractive platform to develop well-ordered self-assembled nanostructures, unattainable in bulk solution, due to the templating interaction of the interface with adsorbed molecules. Here, we report time-resolved in situ UV–vis spectroscopic observations of the self-assembly of zinc(II) meso-tetrakis(4-carboxyphenyl)porphyrin (ZnTPPc) at an immiscible aqueous–organic interface. We show that the kinetically favored metastable J-type nanostructures form quickly, but then transform into stable thermodynamically favored H-type nanostructures. Numerical modeling revealed two parallel and competing cooperative pathways leading to the different porphyrin nanostructures. These insights demonstrate that pathway complexity is not unique to self-assembly processes in bulk solution and is equally valid for interfacial self-assembly. Subsequently, the interfacial electrostatic environment was tuned using a kosmotropic anion (citrate) in order to influence the pathway selection. At high concentrations, interfacial nanostructure formation was forced completely down the kinetically favored pathway, and only J-type nanostructures were obtained. Furthermore, we found by atomic force microscopy and scanning electron microscopy that the J- and H-type nanostructures obtained at low and high citric acid concentrations, respectively, are morphologically distinct, which illustrates the pathway-dependent material properties.

A Porphyrin-Involved Benzene-1,3,5-Tricarboxamide Dendrimer (Por-BTA) as a Multifunctional Interface Material for Efficient and Stable Perovskite Solar Cells

Surface defects of perovskite films are the major sources of nonradiative recombination which limit the efficiency and stability of perovskite solar cells. Surface passivation represents one of the most efficient strategies to solve this problem. Herein, for the first time we designed a porphyrin-involved benzene-1,3,5-tricarboxamide dendrimer (Por-BTA) as a multifunctional interface material between the interface of the perovskite and the hole-transporting layer (spiro-OMeTAD) for the surface passivation of perovskite films. The results suggested that Por-BTA not only efficiently passivated the perovskite surface defects via the coordination of the exposed Pb²⁺ with the carbonyl unit and basic sites of pyrrole units in Por-BTA but also improved the interface contact and the charge transfer between the perovskite and spiro-OMeTAD ascribed to the strong intermolecular π-π stacking of Por-BTA. It was shown that the PSC devices with the Por-BTA treatment exhibited improved power conversion efficiency with the champion of 22.30% achieved (21.30% for the control devices), which is mainly attributed to the increased short-circuit current density and fill factor. Interestingly, the stability of moisture for the Por-BTA-treated device was also enhanced compared to those without the Por-BTA treatment. This work presents a promising direction toward the design of multifunctional organic molecules as the interface materials to improve the cell performance of PSCs.

1,1'-Bis(diphenylphosphino)ferrocene Platinum(II) Complexes as a Route to Functionalized Multiporphyrin Systems

In this study, the cationic complex [PtMe(Me₂SO)(dppf)]CF₃SO₃ (PtFc) (dppf = 1,1′-bis(diphenylphosphino)ferrocene) was exploited as a precursor to functionalize the multi-chromophoric system hexakis(pyridyl-porphyrinato)benzene (1). The final adduct [PtFc]₁₈-1, containing eighteen platinum(II) organometallic [PtMe(dppf)] fragments, was prepared and characterized through UV/Vis absorption, ³¹P{¹H}-NMR spectroscopy, and fluorescence emission. UV/vis and fluorescence titrations confirmed the coordination between the platinum(II) center and all the pyridyl moieties of the peripheral substituent groups of the porphyrin. The drop casting of diluted dichloromethane solution of [PtFc]₁₈-1 onto a glass surface afford micrometer-sized emissive porphyrin rings.

Solute-Solvent Interactions in Modern Physical Organic Chemistry: Supramolecular Polymers as a Muse

Interactions between solvents and solutes are a cornerstone of physical organic chemistry and have been the subject of investigations over the last century. In recent years, a renewed interest in fundamental aspects of solute-solvent interactions has been sparked in the field of supramolecular chemistry in general and that of supramolecular polymers in particular. Although solvent effects in supramolecular chemistry have been recognized for a long time, the unique opportunities that supramolecular polymers offer to gain insight into solute-solvent interactions have become clear relatively recently. The multiple interactions that hold the supramolecular polymeric structure together are similar in strength to those between solute and solvent. The cooperativity found in ordered supramolecular polymers leads to the possibility of amplifying these solute-solvent effects and will shed light on extremely subtle solvation phenomena. As a result, many exciting effects of solute-solvent interactions in modern physical organic chemistry can be studied using supramolecular polymers. Our aim is to put the recent progress into a historical context and provide avenues toward a more comprehensive understanding of solvents in multicomponent supramolecular systems.

Controlling J-Aggregates Formation and Chirality Induction through Demetallation of a Zinc(II) Water Soluble Porphyrin

Under acidic conditions and at high ionic strength, the zinc cation is removed from its metal complex with 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS₄) thus leading to the diacid free porphyrin, that subsequently self-organize into J-aggregates. The kinetics of the demetallation step and the successive supramolecular assembly formation have been investigated as a function of pH and ionic strength (controlled by adding ZnSO₄). The demetallation kinetics obey to a rate law that is first order in [ZnTPPS₄] and second order in [H⁺], according to literature, with k₂ = 5.5 ± 0.4 M⁻² s⁻¹ at 298 K (IS = 0.6 M, ZnSO₄). The aggregation process has been modeled according to an autocatalytic growth, where after the formation of a starting seed containing m porphyrin units, the rate evolves as a power of time. A complete analysis of the extinction time traces at various wavelengths allows extraction of the relevant kinetic parameters, showing that a trimer or tetramer should be involved in the rate-determining step of the aggregation. The extinction spectra of the J-aggregates evidence quite broad bands, suggesting an electronic coupling mechanism different to the usual Frenkel exciton coupling. Resonance light scattering intensity in the aggregated samples increases with increasing both [H⁺] and [ZnSO₄]. Symmetry breaking occurs in these samples and the J-aggregates show circular dichroism spectra with unusual bands. The asymmetry g-factor decreases in its absolute value with increasing the catalytic rate k_c, nulling and eventually switching the Cotton effect from negative to positive. Some inferences on the role exerted by zinc cations on the kinetics and structural features of these nanostructures have been discussed.

Preparation of cross-linked supramolecular polymers based on benzo-21-crown-7/secondary ammonium salt host-guest interactions

We found that TC7 not only self-assembles into one-dimensional supramolecular aggregates in chloroform, but also forms cross-linked supramolecular polymers via host-guest complexation between benzo-21-crown-7 and secondary ammonium salts. Compared with one-dimensional linear supramolecular polymers, soft and long viscous fibers were pulled out from a concentrated solution of cross-linked supramolecular polymers as a result of higher viscosity and lower diffusion coefficients.

Self-assembly of porphyrin hexamers via bidentate metal-ligand coordination

The supramolecular assembly of metal-porphyrin hexamers with bidentate ligands in chloroform solutions is demonstrated by UV/Vis and 1H NMR-titrations, and Small Angle Neutron Scattering (SANS) experiments. Titrations of zinc porphyrin hexamer Zn1 with 1,4-diazabicyclo[2,2,2]octane (DABCO) revealed that at a DABCO/Zn1 molar ratio of 3, intermolecular sandwich complexes are formed, which can be considered as "circular-shaped porphyrin ladders". These supramolecular complexes further aggregate into larger polymeric stacks, as a result of a combination of cooperativity effects, π-π stacking interactions, and chelate effects. The presence of rodlike assemblies in solution, formed by assembly of Zn1 and DABCO, is confirmed by SANS-experiments. Using a model for cylindrical assemblies, curve fitting calculations reveal that rods with an average length of 26 nm and a radius of 30-35 Å were formed, corresponding to columnar stacks of approximately 30 hexamer molecules. In contrast, the metal-free hexamer H21 did not form extended assemblies due to the absence of coordinative intermolecular interactions.

Supramolecular scaffolds enabling the controlled assembly of functional molecular units

To assemble functional molecular units into a desired structure while controlling positional and orientational order is a key technology for the development of high-performance organic materials that exhibit electronic, optoelectronic, biological and even dynamic functions. For this purpose, we cannot rely simply on the inherent self-assembly properties of the target functional molecular units, since it is difficult to predict, based solely on the molecular structure, what structure will be achieved upon assembly. To address this issue, it would be useful to employ molecular building blocks with self-assembly structures that can be clearly predicted and defined, to make target molecular units assemble into a desired structure. To date, various motifs of molecular assemblies, polymers, discrete and/or three-dimensional metal-organic complexes, nanoparticles and metal/metal oxide substrates have been developed to create materials with particular structures and dimensionalities. In this perspective, we define such assembly motifs as "supramolecular scaffolds". The structure of supramolecular scaffolds can be classified in terms of dimensionality, and they range in size from nano- to macroscopic scales. Functional molecular units, when attached to supramolecular scaffolds either covalently or non-covalently, can be assembled into specific structures, thus enabling the exploration of new properties, which cannot be achieved with the target molecular units alone. Through the classification and overview of reported examples, we shed new light on supramolecular scaffolds for the rational design of organic and polymeric materials.

Synthesis and Speciation-Dependent Properties of a Multimetallic Model Complex of NiSOD That Exhibits Unique Hydrogen-Bonding

The complex Na₃[{Ni^II(nmp)}₃S₃BTA^alk)] (1) (nmp^2- = deprotonated form of N-(2-mercaptoethyl)picolinamide; H₃S₃BTA^alk = N¹,N³,N⁵-tris(2-mercaptoethyl)benzene-1,3,5-tricarboxamide, where H = dissociable protons), supported by the thiolate-benzenetricarboxamide scaffold (S₃BTA^alk), has been synthesized as a trimetallic model of nickel-containing superoxide dismutase (NiSOD). X-ray absorption spectroscopy (XAS) and ¹H NMR measurements on 1 indicate that the Ni^II centers are square-planar with N₂S₂ coordination, and Ni-N and Ni-S distances of 1.95 and 2.16 Å, respectively. Additional evidence from IR indicates the presence of H-bonds in 1 from the approximately -200 cm^-1 shift in ν_NH from free ligand. The presence of H-bonds allows for speciation that is temperature-, concentration-, and solvent-dependent. In unbuffered water and at low temperature, a dimeric complex (1^A; λ = 410 nm) that aggregates through intermolecular NH···O═C bonds of BTA units is observed. Dissolution of 1 in pH 7.4 buffer or in unbuffered water at temperatures above 50 °C results in monomeric complex (1^M; λ = 367 nm) linked through intramolecular NH···S bonds. DFT computations indicate a low energy barrier between 1^A and 1^M with nearly identical frontier MOs and Ni-ligand metrics. Notably, 1^A and 1^M exhibit remarkable stability in protic solvents such as MeOH and H₂O, in stark contrast to monometallic [Ni^II(nmp)(SR)]^- complexes. The reactivity of 1 with excess O₂, H₂O₂, and O₂^•- is species-dependent. IR and UV-vis reveal that 1^A in MeOH reacts with excess O₂ to yield an S-bound sulfinate, but does not react with O₂^•-. In contrast, 1^M is stable to O₂ in pH 7.4 buffer, but reacts with O₂^•- to yield a putative [Ni^II(nmp)(O₂)]^- complex from release of the BTA-thiolate based on EPR.

Directing the Self-Assembly Behaviour of Porphyrin-Based Supramolecular Systems

The self-assembly behaviour of a library of tetra-amidated porphyrin molecules decorated with a variety of solubilizing wedges is investigated as dilute solutions in methylcyclohexane. Small changes in the solubilising wedge of the porphyrins resulted in different aggregated states, as evidenced by CD and UV/Vis absorption spectroscopy. The porphyrins form co-facially stacked H-aggregates, slip-stacked J-aggregates or a mixture of both. Detailed thermodynamic and kinetic analysis showed that in all cases the formation of J-aggregates proceeds via an isodesmic mechanism whereas H-aggregates are formed via a cooperative mechanism. It is shown that these aggregates assemble in a parallel pathway, in which both compete for the monomer, compared to a sequential pathway, in which one of the aggregates interconverts into the other. Interestingly, kinetic analysis of porphyrins that only form H-aggregates in thermodynamic equilibrium revealed that the competing pathway towards J-aggregates is operational in these systems as well. Our findings show that the balance between H- and J-aggregates depends on remarkably small changes in the architecture of the solubilising wedges.

Anisotropic Self-Assembly of Supramolecular Polymers and Plasmonic Nanoparticles at the Liquid-Liquid Interface

The study of supramolecular polymers in the bulk, in diluted solution, and at the solid-liquid interface has recently become a major topic of interest, going from fundamental aspects to applications in materials science. However, examples of supramolecular polymers at the liquid-liquid interface are mostly unexplored. Here, we describe the supramolecular polymerization of triarylamine molecules and their light-triggered organization at a chloroform-water interface. The resulting interfacial nematic layer of these 1D supramolecular polymers is further used as a template for the precise alignment of spherical gold nanoparticles coming from the water phase. These hybrid thin films are spontaneously formed in a single process, without chemical prefunctionalization of the metallic nanoparticles, and their ordering is improved by centrifugation. The resulting polymer chains and strings of nanoparticles can be co-aligned with high anisotropy over very large distances. By using a combination of experimental and theoretical investigations, we decipher the full sequence of this oriented self-assembly process. In such a highly anisotropic configuration, electron energy loss spectroscopy reveals that the self-assembled nanoparticles behave as plasmonic waveguides.

Effect of zinc cations on the kinetics of supramolecular assembly and the chirality of porphyrin J-aggregates

Dilute aqueous solutions of anionic meso-4-sulfonatophenyl-porphyrin (TPPS) extract zinc(ii) ions from glass or quartz surfaces at room temperature and efficiently form the corresponding metal complex (ZnTPPS). The partial or complete formation of ZnTPPS has been probed by UV/Vis spectroscopy and both static and time-resolved fluorescence. The source of zinc(ii) ions has been clearly identified through inductively coupled plasma optical emission spectrometry. The presence of increasing amounts of ZnTPPS slows down the rate of TPPS J-aggregate formation in acid solution. This influences the nucleation step and has a profound impact on the onset of chirality in these species. This evidence indicates the important role of this adventitious metal ion in the interpretation of various spectroscopic and kinetic data for the self-assembly of the TPPS porphyrin and provides some insights into controversial findings on their chirality. The use of this metal derivative as the starting compound for in situ formation of monomeric TPPS is suggested.

Mesoscopic helical architectures via self-assembly of porphyrin-based discotic systems

Mesoscopic super-helices with preferred helicity have been serendipitously formed via the self-assembly of electroactive extended core discotic molecules.

Supramolecular Helical Systems: Helical Assemblies of Small Molecules, Foldamers, and Polymers with Chiral Amplification and Their Functions

In this review, we describe the recent advances in supramolecular helical assemblies formed from chiral and achiral small molecules, oligomers (foldamers), and helical and nonhelical polymers from the viewpoints of their formations with unique chiral phenomena, such as amplification of chirality during the dynamic helically assembled processes, properties, and specific functionalities, some of which have not been observed in or achieved by biological systems. In addition, a brief historical overview of the helical assemblies of small molecules and remarkable progress in the synthesis of single-stranded and multistranded helical foldamers and polymers, their properties, structures, and functions, mainly since 2009, will also be described.

Investigation of the Aggregation Properties of a Chiral Porphyrin Bearing Citronellal Meso Substituent Groups

A new porphyrin bearing four R or S hydrogenated citronellal units directly bound to the meso positions of the porphyrin ring was synthesized and fully characterized through MALDI-TOF, NMR, UV/Vis absorption, and fluorescence emission spectroscopies. Both enantiomers exhibit a monomeric nature in a series of organic solvents. Acting on the polarity of the solvent, i.e., increasing the amount of water in mixture with acetone, aggregation occurs, as revealed by UV/Vis absorption, fluorescence emission, and resonance light scattering. The occurrence of both H- and J-type aggregates was suggested by fluorescence lifetime measurements. In contrast to the monomeric species, these aggregates exhibit CD spectra reflecting the chirality of the building blocks. AFM microscopy shows that micrometer ribbon-like structures form by the casting solution of these porphyrins in acetone/water onto a glass surface.

Nanoscale topography influences polymer surface diffusion

Using high-throughput single-molecule tracking, we studied the diffusion of poly(ethylene glycol) chains at the interface between water and a hydrophobic surface patterned with an array of hexagonally arranged nanopillars. Polymer molecules displayed anomalous diffusion; in particular, they exhibited intermittent motion (i.e., immobilization and "hopping") suggestive of continuous-time random walk (CTRW) behavior associated with desorption-mediated surface diffusion. The statistics of the molecular trajectories changed systematically on surfaces with pillars of increasing height, exhibiting motion that was increasingly subdiffusive and with longer waiting times between diffusive steps. The trajectories were well-described by kinetic Monte Carlo simulations of CTRW motion in the presence of randomly distributed permeable obstacles, where the permeability (the main undetermined parameter) was conceptually related to the obstacle height. These findings provide new insights into the mechanisms of interfacial transport in the presence of obstacles and on nanotopographically patterned surfaces.

Solution scattering studies of the hierarchical assembly of porphyrin trimers based on benzene triscarboxamide

The self-assembly of achiral and chiral porphyrin trimers based on benzene triscarboxamide in solution is studied with the help of NMR, FT-IR, UV-vis, and CD spectroscopy. These studies revealed that in apolar solvents the porphyrin trimers self-assembled in columnar stacks via a combination of hydrogen bonding and π-π stacking interactions. While the critical aggregation constant is about 0.2 mM in chloroform, aggregation already occurs at micromolar concentrations in n-hexane. Small angle neutron scattering (SANS) studies in chloroform, toluene, and n-hexane confirmed aggregation of the trimers into columnar stacks. In chloroform and n-hexane, but not in toluene, the trimers gelated the solvent. In chloroform the stacks of the achiral trimer were found to contain on average about 70 molecules, while in toluene the stacks were much smaller and contained on average 7-9 molecules. In n-hexane the SANS studies revealed that the chiral trimer formed a gel with an average mesh size of the transient network of chains of approximately 90 nm, with chains being built up from effective cylindrical aggregates with an average length of 20 nm.

Self-assembly: from amphiphiles to chromophores and beyond

Self-assembly has been recognised as a ubiquitous aspect of modern chemistry. Our understanding and applications of self-assembly are substantially based on what has been learned from biochemical systems. In this review, we describe various aspects of self-assembly commencing with an account of the soft structures that are available by assembly of surfactant amphiphiles, which are important scientific and industrial materials. Variation of molecular design using rules defined by surfactant self-assembly permits synthesis of functional nanostructures in solution and at surfaces while increasing the strength of intermolecular interactions through π-π stacking, metal cation coordination and/or hydrogen bonding leads to formation of highly complex bespoke nanostructured materials exemplified by DNA assemblies. We describe the origins of self-assembly involving aggregation of lipid amphiphiles and how this subject has been expanded to include other highly advanced chemical systems.

Tuning the chiroptical and morphological properties of steroidal-porphyrin aggregates: a mechanistic, structural, and MM investigation

The aggregation of a steroid-functionalised porphyrin derivative occurs with the formation of J-type chiral species. Spectroscopic and SEM studies indicate that the initial concentration of the macrocycle strongly influences the morphology of the final mesoscopic structures, as a consequence of a change in the mechanistic course of the self-assembly process. Fibrillar structures are obtained at low porphyrin concentration, whereas aggregates of globular shapes are formed on increasing the substrate concentration. Molecular mechanics investigations gave insights into the intimate nature of the driving forces that govern the self-assembly process, pointing out the importance of ring distortion, of intramolecular steroidal OH-π hydrogen bonds, as well as dispersion forces among the tetrapyrrolic platforms.

Revisiting urea-based gelators: strong solvent- and casting-microstructure dependencies and organogel processing using an alumina template

Microstructures obtained from simple gelators prove to be strongly solvent- and casting-dependent. For the first time, a membrane template was used to process a xerogel-type material.

Kinetic control of chirality in porphyrin J-aggregates

Detailed kinetic investigations demonstrate the fundamental role of kinetic parameters in the expression and transmission of chirality in supramolecular systems. The rate of the aggregation process leading to the formation of J-aggregates strongly affects the size of these nanoassemblies and the chiral induction.

Kinetically driven self-assembly of a binary solute mixture with controlled phase separation via electro-hydrodynamic flow of corona discharge

This feature article describes a new and facile process to fabricate a variety of thin films of non-volatile binary solute mixtures suitable for high performance organic electronic devices via electro-hydrodynamic flow of conventional corona discharge. Both Corona Discharge Coating (CDC) and a modified version of CDC, Scanning Corona Discharge Coating (SCDC), are based on utilizing directional electric flow, known as corona wind, of the charged uni-polar particles generated by corona discharge between a metallic needle and a bottom plate under a high electric field (5-10 kV cm(-1)). The electric flow rapidly spreads out the binary mixture solution on the bottom plate and subsequently forms a smooth and flat thin film in a large area within a few seconds. In the case of SCDC, the static movement of the bottom electrode on which a binary mixture solution is placed provides further control of thin film formation, giving rise to a film highly uniform over a large area. Interesting phase separation behaviors were observed including nanometer scale phase separation of a polymer-polymer binary mixture and vertical phase separation of a polymer-organic semiconductor mixture. Core-shell type phase separation of either polymer-polymer or polymer-colloidal nanoparticle binary mixtures was also developed with a periodically patterned microstructure when the relative location of the corona wind was controlled to a binary solution droplet on a substrate. We also demonstrate potential applications of thin functional films with controlled microstructures by corona coating to various organic electronic devices such as electroluminescent diodes, field effect transistors and non-volatile polymer memories.

Benzene-1,3,5-tricarboxamide: a versatile ordering moiety for supramolecular chemistry

After their first synthesis in 1915 by Curtius, benzene-1,3,5-tricarboxamides (BTAs) have become increasingly important in a wide range of scientific disciplines. Their simple structure and wide accessibility in combination with a detailed understanding of their supramolecular self-assembly behaviour allow full utilization of this versatile, supramolecular building block in applications ranging from nanotechnology to polymer processing and biomedical applications. While the opportunities in the former cases are connected to the self-assembly of BTAs into one-dimensional, nanometer-sized rod like structures stabilised by threefold H-bonding, their multivalent nature drives applications in the biomedical field. This review summarises the different types of BTAs that appeared in the recent literature and the applications they have been evaluated in. Currently, the first commercial applications of BTAs are emerging. The adaptable nature of this multipurpose building block promises a bright future.

Extremely strong self-assembly of a bimetallic salen complex visualized at the single-molecule level

A bis-Zn(salphen) structure shows extremely strong self-assembly both in solution as well as at the solid-liquid interface as evidenced by scanning tunneling microscopy, competitive UV-vis and fluorescence titrations, dynamic light scattering, and transmission electron microscopy. Density functional theory analysis on the Zn(2) complex rationalizes the very high stability of the self-assembled structures provoked by unusual oligomeric (Zn-O)(n) coordination motifs within the assembly. This coordination mode is strikingly different when compared with mononuclear Zn(salphen) analogues that form dimeric structures having a typical Zn(2)O(2) central unit. The high stability of the multinuclear structure therefore holds great promise for the development of stable self-assembled monolayers with potential for new opto-electronic materials.

Central metal ion determined self-assembly of intrinsically chiral porphyrins

The aggregation of a tetraaryl-porphyrin with chiral amide-containing side groups depends critically on the central metal ion in the tetrapyrrolic core, an effect shown dramatically in solution as well as in the gel formation by the compounds. In solution, the circular dichroism (CD) spectra of the metalloporphyrins show that they all aggregate to some degree, and in most cases the aggregates of the metal-containing species is more favored than the parent free-base porphyrin. The compound which shows the greatest optical activity is the zinc(II) porphyrin which forms a J-aggregate with large Cotton effects in the CD spectrum. Infrared spectroscopy revealed that this aggregate is favored by interaction of the amide oxygen atom with the zinc(II) ion at the core of the porphyrin. The other metalloporphyrins, containing divalent copper, cobalt, and palladium or manganese(III) acetate all show CD activity, and all but the cobalt compound form gels in hexane or cyclohexane. The morphology of the xerogels formed after evaporation of the solvent from these gels depend greatly on the metal ion, with only the copper porphyrin — which shows a clear H-aggregate in solution — having a fibrous morphology