Graphene nanopore with a self-integrated optical antenna

Atomically precise photothermal nanomachines

Interfacing molecular machines to inorganic nanoparticles can, in principle, lead to hybrid nanomachines with extended functions. Here we demonstrate a ligand engineering approach to develop atomically precise hybrid nanomachines by interfacing gold nanoclusters with tetraphenylethylene molecular rotors. When gold nanoclusters are irradiated with near-infrared light, the rotation of surface-decorated tetraphenylethylene moieties actively dissipates the absorbed energy to sustain the photothermal nanomachine with an intact structure and steady efficiency. Solid-state nuclear magnetic resonance and femtosecond transient absorption spectroscopy reveal that the photogenerated hot electrons are rapidly cooled down within picoseconds via electron-phonon coupling in the nanomachine. We find that the nanomachine remains structurally and functionally intact in mammalian cells and in vivo. A single dose of near-infrared irradiation can effectively ablate tumours without recurrence in tumour-bearing mice, which shows promise in the development of nanomachine-based theranostics.

Gold Nanorod Density-Dependent Label-Free Bacteria Sensing on a Flake-like 3D Graphene-Based Device by SERS

Surface-enhanced Raman spectroscopy (SERS) is an effective technique for biosensing, enabling label-free detection of biomolecules with enhanced sensitivity. There is a tremendous probability of signal failure in Raman frequencies because of the scattering of the Raman radiation in liquids, effective SERS improvement is required to reduce this issue when considering liquid specimens. We examined a liquid bacterial sample, investigating the electrostatic interactions of the bacterial samples with gold nanorods (AuNRs) and graphene. We established a voltage-gated 3D graphene functionalized with an AuNR-based device on the silicon substrate for SERS measurements when the applied voltage ranges from 0 to 3 V. Moreover, AuNRs density-susceptible bacterial sample analysis with varied concentrations of bacterial samples has also been described. Using bacterial SERS analysis, the bacterial components amide II (1555-1565 cm-1) and amide III (1250-1350 cm-1) have been discovered for both bacteria, Gram-positive, Listeria monocytogenes and Gram-negative, Salmonella typhi. Our fabricated device affords an interesting label-free, rapid, and reproducible bacterial sample analysis based on the density of the AuNRs when functionalizing flake-like 3D graphene, which can help facilitate label-free bacteria sensing platforms.

Fabrication of 1-octane sulphonic acid modified nanoporous graphene with tuned hydrophilicity for decontamination of industrial wastewater from organic and inorganic contaminants

This research work is based on the fabrication of a graphene oxide-based composite (GOBC) to remove the maximum number of contaminants from different industrial effluents. The GO was first intercalated with 1-octanesulphonic acid sodium salt and subjected to microwave irradiation to produce GOBC. Fixed-bed column tests and Jar-tests were performed for removal of the most harmful endocrine disrupting compounds (EDCs) such as bisphenol A, bisphenol S, endosulphan, beta-estradiol, dyes (methylene blue and violate) and toxic metal ions such as Pb²⁺, Li⁺, Ni²⁺, Co²⁺, Cr⁶⁺, Zn²⁺, Cd²⁺, Hg²⁺, Cu²⁺, and As⁵⁺via adsorption. The prepared material was thoroughly characterized for its unique functional and structural properties. The results obtained from Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller, scanning electron microscopy, Raman spectroscopy, water contact angle and X-ray diffraction analysis confirmed the successful preparation of GOBC using the proposed intercalation/microwave method. The water contact angle results showed decreased hydrophilicity of GOBC as compared to GO as the contact angle of GOBC (77.75°) was higher than that of GO (53.98°). The effects of main column parameters such as bed height, initial analyte concentration and solution flow rate were investigated. The results revealed that shorter breakthrough time, and high adsorption capacity were obtained at high flow rates of 1 mL min^-1, while longer breakthrough time and lower adsorption capacity were obtained at lower flow rates of 0.5 mL min^-1. The effect of bed depth on the breakthrough curve of analyte adsorption was a steep breakthrough curve; or a shorter breakthrough time occurring at lower bed height. The adsorption data obeyed the Yoon-Nelson and Thomas models very well. The adsorption capacity for BPA, BPS, endosulphan, beta-estradiol, methylene blue and violate was found to be 307, 305, 260, 290, 230 and 195 mg g^-1, respectively. The adsorption capacity of GOBC for toxic metal ions such as Pb²⁺, Li⁺, Ni²⁺, Co²⁺, Cr⁶⁺, Zn²⁺, Cd²⁺, Hg²⁺, Cu²⁺, and As⁵⁺ was found to be 156, 136, 126, 124, 118, 114, 82, 82, 72 and 72 mg g^-1, respectively with excellent kinetics. The adsorption data obtained using Jar-tests revealed that GOBC obeys a Langmuir isotherm and a pseudo second order kinetics model. The analysis of industrial wastewater samples showed good removal efficiency of GOBC.

Graphene nano-sieves by femtosecond laser irradiation

The formation of nano-pores in graphene crystal structure is alternative way to engineer its electronic properties, chemical reactivity, and surface interactions, enabling applications in technological fields such as sensing, energy and separation. The past few years, nano-perforation of graphene sheets has been accomplished by a variety of different methods suffering mainly from poor scalability and cost efficiency issues. In this work, we introduce an experimental protocol to engineer nanometer scale pores in CVD graphene membranes under ambient conditions, using low power ultra-short laser pulses and overcoming the drawbacks of other perforation techniques. Using Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) we visualized and quantified the nanopore network while Raman spectroscopy is utilized to correlate the nano-perforated area with the nanotopographic imaging. We suggest that Raman imaging provides the identification of nanoporous area and, in combination with AFM, we provide solid evidence for the reproducibility of the method, since under these experimental conditions, nanopores of a certain size distribution are formed.

Localized Nanopore Fabrication via Controlled Breakdown

Nanopore sensors provide a unique platform to detect individual nucleic acids, proteins, and other biomolecules without the need for fluorescent labeling or chemical modifications. Solid-state nanopores offer the potential to integrate nanopore sensing with other technologies such as field-effect transistors (FETs), optics, plasmonics, and microfluidics, thereby attracting attention to the development of commercial instruments for diagnostics and healthcare applications. Stable nanopores with ideal dimensions are particularly critical for nanopore sensors to be integrated into other sensing devices and provide a high signal-to-noise ratio. Nanopore fabrication, although having benefited largely from the development of sophisticated nanofabrication techniques, remains a challenge in terms of cost, time consumption and accessibility. One of the latest developed methods—controlled breakdown (CBD)—has made the nanopore technique broadly accessible, boosting the use of nanopore sensing in both fundamental research and biomedical applications. Many works have been developed to improve the efficiency and robustness of pore formation by CBD. However, nanopores formed by traditional CBD are randomly positioned in the membrane. To expand nanopore sensing to a wider biomedical application, controlling the localization of nanopores formed by CBD is essential. This article reviews the recent strategies to control the location of nanopores formed by CBD. We discuss the fundamental mechanism and the efforts of different approaches to confine the region of nanopore formation.

Plasmonic sensors based on graphene and graphene hybrid materials

The past decade has witnessed a rapid growth of graphene plasmonics and their applications in different fields. Compared with conventional plasmonic materials, graphene enables highly confined plasmons with much longer lifetimes. Moreover, graphene plasmons work in an extended wavelength range, i.e., mid-infrared and terahertz regime, overlapping with the fingerprints of most organic and biomolecules, and have broadened their applications towards plasmonic biological and chemical sensors. In this review, we discuss intrinsic plasmonic properties of graphene and strategies both for tuning graphene plasmons as well as achieving higher performance by integrating graphene with plasmonic nanostructures. Next, we survey applications of graphene and graphene-hybrid materials in biosensors, chemical sensors, optical sensors, and sensors in other fields. Lastly, we conclude this review by providing a brief outlook and challenges of the field. Through this review, we aim to provide an overall picture of graphene plasmonic sensing and to suggest future trends of development of graphene plasmonics.

DNA sequencing by Förster resonant energy transfer

We propose a new DNA sequencing concept based on nonradiative Förster resonant energy transfer (FRET) from a donor quantum dot (QD) to an acceptor molecule. The FRET mechanism combined with the nanopore-based DNA translocation is suggested as a novel concept for sequencing DNA molecules. A recently-developed hybrid quantum/classical method is employed, which uses time-dependent density functional theory and quasistatic finite difference time domain calculations. Due to the significant absorbance of DNA bases for photon energies higher than 4 eV, biocompatibility, and stability, we use Zinc-Oxide (ZnO) QD as a donor in the FRET mechanism. The most sensitivity for the proposed method to DNA is achieved for the Hoechst fluorescent-dye acceptor and 1 nm ZnO-QD. Results show that the insertion of each type of DNA nucleobases between the donor and acceptor changes the frequency of the emitted light from the acceptor molecule between 0.25 to 1.6 eV. The noise analysis shows that the method can determine any unknown DNA nucleobases if the signal-to-noise ratio is larger than 5 dB. The proposed concept and excellent results shed light on a new promising class of DNA sequencers.

Multi-resistive pulse sensor microfluidic device

Resistive pulse sensors have been used to characterise everything from whole cells to small molecules. Their integration into microfluidic devices has simplified sample handling whilst increasing throughput. Typically, these devices measure a limited size range, making them prone to blockages in complex sample matrixes. To prolong their life and facilitate their use, samples are often filtered or prepared to match the sample with the sensor diameter. Here, we advance our tuneable flow resistive pulse sensor which utilises additively manufactured parts. The sensor allows parts to be easily changed, washed and cleaned, its simplicity and versatility allow components from existing nanopore fabrication techniques such as glass pipettes to be integrated into a single device. This creates a multi-nanopore sensor that can simultaneously measure particles from 0.1 to 30 μm in diameter. The orientation and controlled fluid flow in the device allow the sensors to be placed in series, whereby smaller particles can be measured in the presence of larger ones without the risk of being blocked. We illustrate the concept of a multi-pore flow resistive pulse sensor, by combining an additively manufactured tuneable sensor, termed sensor 1, with a fixed nanopore sensor, termed sensor 2. Sensor 1 measures particles as small as 10 μm in diameter, whilst sensor 2 can be used to characterise particles as small as 100 nm, depending upon its dimensions. We illustrate the dual pore sensor by measuring 1 and 10 μm particles simultaneously.

Interband plasmon-enhanced optical absorption of DNA nucleobases through the graphene nanopore

We propose a novel, to the best of our knowledge, plasmonic-based methodology for the purpose of fast DNA sequencing. The interband surface plasmon resonance and field-enhancement properties of graphene nanopore in the presence of the DNA nucleobases are investigated using a hybrid quantum/classical method (HQCM), which employs time-dependent density functional theory and a quasistatic finite difference time domain approach. In the strong plasmonic-molecular coupling regime where the plasmon and DNA absorption frequencies are degenerated, the optical response of DNA molecule in the vicinity of the nanopore is enhanced. In contrast, when the plasmon and nucleobases resonances are detuned the distinct peaks and broadening of the molecular resonances represent the inherent properties of the nucleobase. Due to the different optical properties of DNA nucleobases in the ultraviolet (UV) region of light, the signal corresponding to the replacement of nucleobases in a DNA block can be determined by considering the differential absorbance. Results show the promising capability of the present mechanism for practical DNA sequencing.

Nanopores in Graphene and Other 2D Materials: A Decade's Journey toward Sequencing

Nanopore techniques offer a low-cost, label-free, and high-throughput platform that could be used in single-molecule biosensing and in particular DNA sequencing. Since 2010, graphene and other two-dimensional (2D) materials have attracted considerable attention as membranes for producing nanopore devices, owing to their subnanometer thickness that can in theory provide the highest possible spatial resolution of detection. Moreover, 2D materials can be electrically conductive, which potentially enables alternative measurement schemes relying on the transverse current across the membrane material itself and thereby extends the technical capability of traditional ionic current-based nanopore devices. In this review, we discuss key advances in experimental and computational research into DNA sensing with nanopores built from 2D materials, focusing on both the ionic current and transverse current measurement schemes. Challenges associated with the development of 2D material nanopores toward DNA sequencing are further analyzed, concentrating on lowering the noise levels, slowing down DNA translocation, and inhibiting DNA fluctuations inside the pores. Finally, we overview future directions of research that may expedite the emergence of proof-of-concept DNA sequencing with 2D material nanopores.

Nanopatterning of silicon via the near-field enhancement effect upon double-pulse femtosecond laser exposure

Utilizing the near-field enhancement effect of a polystyrene microsphere, direct ablation of nanohole arrays by a temporal-shaping femtosecond (fs) laser pulse is presented. The nanohole arrays, which are circular, regular, and free of cracks, were processed without extra post-processing, and their average diameter decreased gradually, as the double-pulse delay increased until 2500 fs. The simulated results by a plasma model and finite difference time domain solution demonstrate that the size decrease of the structure is attributed to the increase of the ablation threshold of silicon. Through fs laser near-field fabrication, the FWHM of nanoholes can be reduced to approximately 50 nm (λ/16) and even to 23 nm when using the second harmonic laser at a wavelength of 400 nm.

Nanopores in two-dimensional materials: accurate fabrication

Two-dimensional (2D) materials such as graphene and molybdenum disulfide have been demonstrated with a wide range of applications in electronic devices, chemical catalysis, single-molecule detection, and energy conversion. In the 2D materials, nanopores can be created, and the 2D nanoporous membranes possess many unique properties such as ultrathin thickness, high surface area, and excellent particle sieving capability, showing extraordinary promise in plenty of applications, such as sea water desalination, gas separation, and DNA sequencing. The performances of these membranes are mainly determined by the nanopore size, structure, and density, which, in turn, rely on the fabrication techniques of the nanopores. This review covers the important progress of nanopore fabrication in 2D materials and comprehensively compares these methods for the features of the introduced nanopores and their formation processes. Future perspectives are discussed on the opportunities and challenges in fabricating high-grade 2D nanopores.

Carbon Nanomaterials for Biomedical Application

The use of carbon-based nanomaterials (CNs) with outstanding properties has been rising in many scientific and industrial application fields. These CNs represent a tunable alternative for applications with biomolecules, which allow interactions in either covalent or noncovalent way. Diverse carbon-derived nanomaterial family exhibits unique features and has been widely exploited in various biomedical applications, including biosensing, diagnosis, cancer therapy, drug delivery, and tissue engineering. In this chapter, we aim to present an overview of CNs with a particular interest in intrinsic structural, electronic, and chemical properties. In particular, the detailed properties and features of CNs and its derivatives, including carbon nanotube (CNT), graphene, graphene oxide (GO), and reduced GO (rGO) are summarized. The interesting biomedical applications are also reviewed in order to offer an overview of the possible fields for scientific and industrial applications of CNs.

DNA nanotechnology assisted nanopore-based analysis

Nanopore technology is a promising label-free detection method. However, challenges exist for its further application in sequencing, clinical diagnostics and ultra-sensitive single molecule detection. The development of DNA nanotechnology nonetheless provides possible solutions to current obstacles hindering nanopore sensing technologies. In this review, we summarize recent relevant research contributing to efforts for developing nanopore methods associated with DNA nanotechnology. For example, DNA carriers can capture specific targets at pre-designed sites and escort them from nanopores at suitable speeds, thereby greatly enhancing capability and resolution for the detection of specific target molecules. In addition, DNA origami structures can be constructed to fulfill various design specifications and one-pot assembly reactions, thus serving as functional nanopores. Moreover, based on DNA strand displacement, nanopores can also be utilized to characterize the outputs of DNA computing and to develop programmable smart diagnostic nanodevices. In summary, DNA assembly-based nanopore research can pave the way for the realization of impactful biological detection and diagnostic platforms via single-biomolecule analysis.

Synthesis of nanoporous graphenes via decarboxylation reaction

Two new crystalline structures of nanoporous graphenes were synthesized via decarboxylation reaction and provided an ideal platform for oxygen evolution reaction.

Plasmonic Nanopores for Single-Molecule Detection and Manipulation: Toward Sequencing Applications

Solid-state nanopore-based sensors are promising platforms for next-generation sequencing technologies, featuring label-free single-molecule sensitivity, rapid detection, and low-cost manufacturing. In recent years, solid-state nanopores have been explored due to their miscellaneous fabrication methods and their use in a wide range of sensing applications. Here, we highlight a novel family of solid-state nanopores which have recently appeared, namely plasmonic nanopores. The use of plasmonic nanopores to engineer electromagnetic fields around a nanopore sensor allows for enhanced optical spectroscopies, local control over temperature, thermophoresis of molecules and ions to/from the sensor, and trapping of entities. This Mini Review offers a comprehensive understanding of the current state-of-the-art plasmonic nanopores for single-molecule detection and biomolecular sequencing applications and discusses the latest advances and future perspectives on plasmonic nanopore-based technologies.

The applications of nanopores in studies of proteins

Nanopores are a label-free platform with the ability to detect subtle changes in the activities of individual biomolecules under physiological conditions. Here, we comprehensively review the technological development of nanopores, focusing on their applications in studying the physicochemical properties and dynamic conformations of peptides, individual proteins, protein-protein complexes and protein-DNA complexes. This is followed by a brief discussion of the potential challenges that need to be overcome before the technology can be widely accepted by the scientific community. We believe that with continued refinement of the technology, significant understanding can be gained to help clarify the role of protein activities in the regulation of cellular physiology and pathogenesis.

Photothermally Enhanced Molecular Delivery and Cellular Positioning on Patterned Plasmonic Interfaces

Photothermal conversion effect of plasmonic nanostructures is considered as a promising technique for cellular and molecular manipulations owing to controllability of local temperature. Therefore, this technique has been extensively applied to biological studies such as controlling cellular behavior, delivery of biologics, and biomolecular detection. Herein, we propose a novel method for directed cell positioning and photothermally modulated molecular delivery to the cells using patterned plasmonic interfaces. Plasmonic substrates with gold nanorods (GNRs) and cell adhesion molecules fabricated by microcontact printing are optimized for cellular positioning on designated patterns. Through the photothermal conversion effect of GNRs on the pattern, we further demonstrate on-demand, light-induced delivery of drug molecules to the target cells. We expect that this approach will provide a new way to study single cellular behaviors and enhance molecular delivery to the target cells.

A potential sensing mechanism for DNA nucleobases by optical properties of GO and MoS2 Nanopores

We propose a new DNA sensing mechanism based on optical properties of graphene oxide (GO) and molybdenum disulphide (MoS2) nanopores. In this method, GO and MoS2 is utilized as quantum dot (QD) nanopore and DNA molecule translocate through the nanopore. A recently-developed hybrid quantum/classical method (HQCM) is employed which uses time-dependent density functional theory and quasi-static finite difference time domain approach. Due to good biocompatibility, stability and excitation wavelength dependent emission behavior of GO and MoS2 we use them as nanopore materials. The absorption and emission peaks wavelengths of GO and MoS2 nanopores are investigated in the presence of DNA nucleobases. The maximum sensitivity of the proposed method to DNA is achieved for the 2-nm GO nanopore. Results show that insertion of DNA nucleobases in the nanopore shifts the wavelength of the emitted light from GO or MoS2 nanopore up to 130 nm. The maximum value of the relative shift between two different nucleobases is achieved by the shift between cytosine (C) and thymine (T) nucleobases, ~111 nm for 2-nm GO nanopore. Results show that the proposed mechanism has a superior capability to be used in future DNA sequencers.

Label-Free Optical Detection of DNA Translocations through Plasmonic Nanopores

Solid-state nanopores are single-molecule sensors that hold great potential for rapid protein and nucleic-acid analysis. Despite their many opportunities, the conventional ionic current detection scheme that is at the heart of the sensor suffers inherent limitations. This scheme intrinsically couples signal strength to the driving voltage, requires the use of high-concentration electrolytes, suffers from capacitive noise, and impairs high-density sensor integration. Here, we propose a fundamentally different detection scheme based on the enhanced light transmission through a plasmonic nanopore. We demonstrate that translocations of single DNA molecules can be optically detected, without the need of any labeling, in the transmitted light intensity through an inverted-bowtie plasmonic nanopore. Characterization and the cross-correlation of the optical signals with their electrical counterparts verify the plasmonic basis of the optical signal. We demonstrate DNA translocation event detection in a regime of driving voltages and buffer conditions where traditional ionic current sensing fails. This label-free optical detection scheme offers opportunities to probe native DNA-protein interactions at physiological conditions.

Scalable fabrication of nanopores in membranes via thermal annealing of Au nanoparticles

Nanopores are promising candidates for versatile sensing of micro- and nanomaterials. However, the fabrication of isolated nanopores with optimal dimensions and distributions requires complex processes that involve the use of high-cost equipment. Herein, we report a scalable fabrication of isolated conical nanopores with adjustable dimensions and distribution densities on a Si₃N₄ membrane via thermal annealing of Au nanoparticles (AuNPs). The AuNP-dispersed solution was dropped and evaporated on the membrane, while the pH value and concentration of AuNPs controlled the zeta potential difference and the distribution density of the attached AuNPs. The optimized thermal annealing directly fabricated conical nanopores at the positions of the AuNPs because of the quasi-liquid state of the AuNPs and their interaction with the Si₃N₄ lattices. The 50, 100, and 200 nm AuNPs enabled one-step fabrication of 8-, 26-, and 63 nm nanopores, while the inter-distances and distribution densities were controllable over the membrane. The physicochemical analyses elucidated the underlying mechanisms of direct nanopore formation, and the precise adjustment of thermal annealing developed three unique nanopores that differently interacted with the AuNPs: (1) Au-residue-embedded nanopores, (2) isolated nanopores, and (3) nanopores with the remaining Au droplet. The AuNPs-driven fabrication of versatile nanopore membranes enables new applications for sensing and transporting small-scale materials.

Advanced Nanoscale Approaches to Single-(Bio)entity Sensing and Imaging

Individual (bio)chemical entities could show a very heterogeneous behaviour under the same conditions that could be relevant in many biological processes of significance in the life sciences. Conventional detection approaches are only able to detect the average response of an ensemble of entities and assume that all entities are identical. From this perspective, important information about the heterogeneities or rare (stochastic) events happening in individual entities would remain unseen. Some nanoscale tools present interesting physicochemical properties that enable the possibility to detect systems at the single-entity level, acquiring richer information than conventional methods. In this review, we introduce the foundations and the latest advances of several nanoscale approaches to sensing and imaging individual (bio)entities using nanoprobes, nanopores, nanoimpacts, nanoplasmonics and nanomachines. Several (bio)entities such as cells, proteins, nucleic acids, vesicles and viruses are specifically considered. These nanoscale approaches provide a wide and complete toolbox for the study of many biological systems at the single-entity level.

Hybrid plasmonic nanostructures based on controlled integration of MoS2 flakes on metallic nanoholes

Here, we propose an easy and robust strategy for the versatile preparation of hybrid plasmonic nanopores by means of controlled deposition of single flakes of MoS2 directly on top of metallic holes. The device is realized on silicon nitride membranes and can be further refined by TEM or FIB milling to achieve the passing of molecules or nanometric particles through a pore. Importantly, we show that the plasmonic enhancement provided by the nanohole is strongly accumulated in the 2D nanopore, thus representing an ideal system for single-molecule sensing and sequencing in a flow-through configuration. Here, we also demonstrate that the prepared 2D material can be decorated with metallic nanoparticles that can couple their resonance with the nanopore resonance to further enhance the electromagnetic field confinement at the nanoscale level. This method can be applied to any gold nanopore with a high level of reproducibility and parallelization; hence, it can pave the way to the next generation of solid-state nanopores with plasmonic functionalities. Moreover, the controlled/ordered integration of 2D materials on plasmonic nanostructures opens a pathway towards new investigation of the following: enhanced light emission; strong coupling from plasmonic hybrid structures; hot electron generation; and sensors in general based on 2D materials.

Integrating Sub-3 nm Plasmonic Gaps into Solid-State Nanopores

Plasmonic nanopores combine the advantages of nanopore sensing and surface plasmon resonances by introducing confined electromagnetic fields to a solid-state nanopore. Ultrasmall nanogaps between metallic nanoantennas can generate the extremely enhanced localized electromagnetic fields necessary for single-molecule optical sensing and manipulation. Challenges in fabrication, however, hamper the integration of such nanogaps into nanopores. Here, a top-down approach for integrating a plasmonic antenna with an ultrasmall nanogap into a solid-state nanopore is reported. Employing a two-step e-beam lithography process, the reproducible fabrication of nanogaps down to a sub-1 nm scale is demonstrated. Subsequently, nanopores are drilled through the 20 nm SiN membrane at the center of the nanogap using focused-electron-beam sculpting with a transmission electron microscope, at the expense of a slight gap expansion for the smallest gaps. Using this approach, sub-3 nm nanogaps can be readily fabricated on solid-state nanopores. The functionality of these plasmonic nanopores for single-molecule detection is shown by performing DNA translocations. These integrated devices can generate intense electromagnetic fields at the entrance of the nanopore and can be expected to find applications in nanopore-based single-molecule trapping and optical sensing.

Instrumentation for low noise nanopore-based ionic current recording under laser illumination

We describe a nanopore-based optofluidic instrument capable of performing low-noise ionic current recordings of individual biomolecules under laser illumination. In such systems, simultaneous optical measurements generally introduce significant parasitic noise in the electrical signal, which can severely reduce the instrument sensitivity, critically hindering the monitoring of single-molecule events in the ionic current traces. Here, we present design rules and describe simple adjustments to the experimental setup to mitigate the different noise sources encountered when integrating optical components to an electrical nanopore system. In particular, we address the contributions to the electrical noise spectra from illuminating the nanopore during ionic current recording and mitigate those effects through control of the illumination source and the use of a PDMS layer on the SiN_x membrane. We demonstrate the effectiveness of our noise minimization strategies by showing the detection of DNA translocation events during membrane illumination with a signal-to-noise ratio of ∼10 at 10 kHz bandwidth. The instrumental guidelines for noise minimization that we report are applicable to a wide range of nanopore-based optofluidic systems and offer the possibility of enhancing the quality of synchronous optical and electrical signals obtained during single-molecule nanopore-based analysis.

Fabrication of Subnanometer-Precision Nanopores in Hexagonal Boron Nitride

We demonstrate the fabrication of individual nanopores in hexagonal boron nitride (h-BN) with atomically precise control of the pore shape and size. Previous methods of pore production in other 2D materials typically create pores with irregular geometry and imprecise diameters. In contrast, other studies have shown that with careful control of electron irradiation, defects in h-BN grow with pristine zig-zag edges at quantized triangular sizes, but they have failed to demonstrate production and control of isolated defects. In this work, we combine these techniques to yield a method in which we can create individual size-quantized triangular nanopores through an h-BN sheet. The pores are created using the electron beam of a conventional transmission electron microscope; which can strip away multiple layers of h-BN exposing single-layer regions, introduce single vacancies, and preferentially grow vacancies only in the single-layer region. We further demonstrate how the geometry of these pores can be altered beyond triangular by changing beam conditions. Precisely size- and geometry-tuned nanopores could find application in molecular sensing, DNA sequencing, water desalination, and molecular separation.

Covalent Modification of Silicon Nitride Nanopore by Amphoteric Polylysine for Short DNA Detection

In this work, we demonstrate a chemical modification approach, by means of covalent-bonding amphoteric poly-l-lysine (PLL) on the interior nanopore surface, which could intensively protect the pore from etching when exposed in the electrolyte under various pH conditions (from pH 4 to 12). Nanopore was generated via simple current dielectric breakdown methodology, covalent modification was performed in three steps, and the functional nanopore was fully characterized in terms of chemical structure, hydrophilicity, and surface morphology. I-V curves were recorded under a broad range of pH stimuli to evaluate the stability of the chemical bonding layer; the plotted curves demonstrated that nanopore with a covalent bonding layer has good pH tolerance and showed apparent reversibility. In addition, we have also measured the conductance of modified nanopore with varied KCl concentration (from 0.1 mM to 1 M) at different pH conditions (pHs 5, 7, 9, and 11). The results suggested that the surface charge density does not fluctuate with variation in salt concentration, which inferred that the SiN _x nanopore was fully covered by PLL. Moreover, the PLL functionalized nanopore has realized the detection of single-stranded DNA homopolymer translocation under bias voltage of 500 mV, and the 20 nt homopolymers could be evidently differentiated in terms of the current amplitude and dwell time at pHs 5, 8, and 11.

Physical Model for Rapid and Accurate Determination of Nanopore Size via Conductance Measurement

Nanopores have been explored for various biochemical and nanoparticle analyses, primarily via characterizing the ionic current through the pores. At present, however, size determination for solid-state nanopores is experimentally tedious and theoretically unaccountable. Here, we establish a physical model by introducing an effective transport length, L_eff, that measures, for a symmetric nanopore, twice the distance from the center of the nanopore where the electric field is the highest to the point along the nanopore axis where the electric field falls to e^-1 of this maximum. By [Formula: see text], a simple expression S₀ = f (G, σ, h, β) is derived to algebraically correlate minimum nanopore cross-section area S₀ to nanopore conductance G, electrolyte conductivity σ, and membrane thickness h with β to denote pore shape that is determined by the pore fabrication technique. The model agrees excellently with experimental results for nanopores in graphene, single-layer MoS₂, and ultrathin SiN_x films. The generality of the model is verified by applying it to micrometer-size pores.

In-Plate and On-Plate Structural Control of Ultra-Stable Gold/Silver Bimetallic Nanoplates as Redox Catalysts, Nanobuilding Blocks, and Single-Nanoparticle Surface-Enhanced Raman Scattering Probes

Noble metal bimetallic nanomaterials have attracted a great deal of attention owing to the strong correlation between their morphology and chemical and physical properties. Even though the synthetic strategies for controlling the shapes of monometallic nanomaterials such as gold (Au) and silver (Ag) are well-developed, limited advances have been made with Au/Ag bimetallic nanomaterials to date. In this work, we demonstrate a highly complex in-plate and on-plate structural control of Au/Ag bimetallic nanoplates (Au/AgBNPLs) in contrast to conventional, simply structured, 1D and 2D, branched, and polyhedral nanomaterials. The polymer used in the synthesis of seeds plays a critical role in controlling the structure of the Au/AgBNPLs. The Au/AgBNPLs exhibit exceptionally high chemical stability against various chemical etchants and a versatile catalytic reactivity with biologically and environmentally relevant chemical species. Significantly, the reversible assembly formation of the Au/AgBNPLs is demonstrated by carrying out the surface-functionalization of the materials with thiol DNA, emphasizing the potential applications of the Au/AgBNPLs in various diagnostic and therapeutic purposes. Finally, the surface-enhanced Raman scattering (SERS) properties of the Au/AgBNPLs are experimentally and theoretically investigated, demonstrating a substantial potential of the Au/AgBNPLs as single-nanoparticle SERS probes. Electron microscopy, UV-vis spectroscopy, selected area electron diffraction (SAED), and energy-dispersive X-ray (EDX) spectroscopy are employed to analyze the structure and composition of the Au/AgBNPLs at the atomic level.

Nano-plasmonic-based structures for DNA sequencing

We propose novel nano-plasmonic-based structures for rapid sequencing of DNA molecules. The optical properties of DNA nucleotides have notable differences in the ultraviolet (UV) region of light. Using nanopore, bowtie, and bowtie-nanopore compound structures, probable application of the surface plasmon resonance (SPR) in DNA sequencing is investigated by employing the discrete dipole approximation method. The effects of different materials like chromium (Cr), aluminum (Al), rhodium (Rh), and graphene (Gr) are studied. We show that for Cr/Al/Gr/Rh, the nucleotide presented shifts the SPR spectra for the nanopore 1/29/5/34 to 14/39/15/67 nm, bowtie 8/2/49/38 to 31/20/79/55 nm, and bowtie-nanopore compound 25/77/5/16 to 80/80/22/39 nm. The Cr-based compound structure shows excellent sensitivity and selectivity which can make it a promising methodology for DNA sequencing.

Molecular Dynamics Simulation of DNA Capture and Transport in Heated Nanopores

The integration of local heat sources with solid-state nanopores offers new means for controlling the transmembrane transport of charged biomacromolecules. In the case of electrophoretic transport of DNA, recent experimental studies revealed unexpected temperature dependences of the DNA capture rate, the DNA translocation velocity, and the ionic current blockades produced by the presence of DNA in the nanopore. Here, we report the results of all-atom molecular dynamics simulations that elucidated the effect of temperature on the key microscopic processes governing electric field-driven transport of DNA through nanopores. Mimicking the experimental setup, we simulated the capture and subsequent translocation of short DNA duplexes through a locally heated nanopore at several temperatures and electrolyte conditions. The temperature dependence of ion mobility at the DNA surface was found to cause the dependence of the relative conductance blockades on temperature. To the first order, the effective force on DNA in the nanopore was found to be independent of temperature, despite a considerable reduction of solution viscosity. The temperature dependence of the solution viscosity was found to make DNA translocations faster for a uniformly heated system but not in the case of local heating that does not affect viscosity of solution surrounding the untranslocated part of the molecule. Increasing solution temperature was also found to reduce the lifetime of bonds formed between cations and DNA. Using a flow suppression algorithm, we were able to separate the effects of electro-osmotic flow and direct ion binding, finding the reduced durations of DNA-ion bonds to increase, albeit weakly, the effective force experienced by DNA in an electric field. Unexpectedly, our simulations revealed a considerable temperature dependence of solvent velocity at the DNA surface-slip velocity, an effect that can alter hydrodynamic coupling between the motion of DNA and the surrounding fluid.

Tuneable graphene nanopores for single biomolecule detection

Solid-state nanopores are promising candidates for next generation DNA and protein sequencing. However, once fabricated, such devices lack tuneability, which greatly restricts their biosensing capabilities. Here we propose a new class of solid-state graphene-based nanopore devices that exhibit a unique capability of self-tuneability, which is used to control their conductance, tuning it to levels comparable to the changes caused by the translocation of a single biomolecule, and hence, enabling high detection sensitivities. Our presented quantum simulation results suggest that the smallest amino acid, glycine, when present in water and in an aqueous saline solution can be detected with high sensitivity, up to a 90% change in conductance. Our results also suggest that passivating the device with nitrogen, making it an n-type device, greatly enhances its sensitivity, and makes it highly sensitive to not only the translocation of a single biomolecule, but more interestingly to intramolecular electrostatics within the biomolecule. Sensitive detection of the carboxyl group within the glycine molecule, which carries a charge equivalent to a single electron, is achieved with a conductance change that reaches as high as 99% when present in an aqueous saline solution. The presented findings suggest that tuneable graphene nanopores, with their capability of probing intramolecular electrostatics, could pave the way towards a new generation of single biomolecule detection devices.

Graphene nanodevices for DNA sequencing

Fast, cheap, and reliable DNA sequencing could be one of the most disruptive innovations of this decade, as it will pave the way for personalized medicine. In pursuit of such technology, a variety of nanotechnology-based approaches have been explored and established, including sequencing with nanopores. Owing to its unique structure and properties, graphene provides interesting opportunities for the development of a new sequencing technology. In recent years, a wide range of creative ideas for graphene sequencers have been theoretically proposed and the first experimental demonstrations have begun to appear. Here, we review the different approaches to using graphene nanodevices for DNA sequencing, which involve DNA passing through graphene nanopores, nanogaps, and nanoribbons, and the physisorption of DNA on graphene nanostructures. We discuss the advantages and problems of each of these key techniques, and provide a perspective on the use of graphene in future DNA sequencing technology.

Protein detection using tunable pores: resistive pulses and current rectification

We present the first comparison between assays that use resistive pulses or rectification ratios on a tunable pore platform. We compare their ability to quantify the cancer biomarker Vascular Endothelial Growth Factor (VEGF). The first assay measures the electrophoretic mobility of aptamer modified nanoparticles as they traverse the pore. By controlling the aptamer loading on the particle surface, and measuring the speed of each translocation event we are able to observe a change in velocity as low as 18 pM. A second non-particle assay exploits the current rectification properties of conical pores. We report the first use of Layer-by-Layer (LbL) assembly of polyelectrolytes onto the surface of the polyurethane pore. The current rectification ratios demonstrate the presence of the polymers, producing pH and ionic strength-dependent currents. The LbL assembly allows the facile immobilisation of DNA aptamers onto the pore allowing a specific dose response to VEGF. Monitoring changes to the current rectification allows for a rapid detection of 5 pM VEGF. Each assay format offers advantages in their setup and ease of preparation but comparable sensitivities.

Single molecule detection with graphene and other two-dimensional materials: nanopores and beyond

Graphene and other two dimensional (2D) materials are currently integrated into nanoscaled devices that may – one day – sequence genomes.

Graphene and other two dimensional (2D) materials are currently integrated into nanoscaled devices that may – one day – sequence genomes. The challenge to solve is conceptually straightforward: cut a sheet out of a 2D material and use the edge of the sheet to scan an unfolded biomolecule from head to tail. As the scan proceeds – and because 2D materials are atomically thin – the information provided by the edge might be used to identify different segments – ideally single nucleotides – in the biomolecular strand. So far, the most efficient approach was to drill a nano-sized pore in the sheet and use this pore as a channel to guide and detect individual molecules by measuring the electrochemical ionic current. Nanoscaled gaps between two electrodes in 2D materials recently emerged as powerful alternatives to nanopores. This article reviews the current status and prospects of integrating 2D materials in nanopores, nanogaps and similar devices for single molecule biosensing applications. We discuss the pros and cons, the challenges, and the latest achievements in the field. To achieve high-throughput sequencing with 2D materials, interdisciplinary research is essential.

Plasmonic Nanopores for Trapping, Controlling Displacement, and Sequencing of DNA

With the aim of developing a DNA sequencing methodology, we theoretically examine the feasibility of using nanoplasmonics to control the translocation of a DNA molecule through a solid-state nanopore and to read off sequence information using surface-enhanced Raman spectroscopy. Using molecular dynamics simulations, we show that high-intensity optical hot spots produced by a metallic nanostructure can arrest DNA translocation through a solid-state nanopore, thus providing a physical knob for controlling the DNA speed. Switching the plasmonic field on and off can displace the DNA molecule in discrete steps, sequentially exposing neighboring fragments of a DNA molecule to the pore as well as to the plasmonic hot spot. Surface-enhanced Raman scattering from the exposed DNA fragments contains information about their nucleotide composition, possibly allowing the identification of the nucleotide sequence of a DNA molecule transported through the hot spot. The principles of plasmonic nanopore sequencing can be extended to detection of DNA modifications and RNA characterization.

Holey Graphene as a Weed Barrier for Molecules

We demonstrate the use of "holey" graphene as a mask against molecular adsorption. Prepared porous graphene is transferred onto a Au{111} substrate, annealed, and then exposed to dilute solutions of 1-adamantanethiol. In the pores of the graphene lattice, we find islands of organized, self-assembled molecules. The bare Au in the pores can be regenerated by postdeposition annealing, and new molecules can be self-assembled in the exposed Au region. Graphene can serve as a robust, patternable mask against the deposition of self-assembled monolayers.

Mechanically Self-Assembled, Three-Dimensional Graphene-Gold Hybrid Nanostructures for Advanced Nanoplasmonic Sensors

Hybrid structures of graphene and metal nanoparticles (NPs) have been actively investigated as higher quality surface enhanced Raman spectroscopy (SERS) substrates. Compared with SERS substrates, which only contain metal NPs, the additional graphene layer provides structural, chemical, and optical advantages. However, the two-dimensional (2D) nature of graphene limits the fabrication of the hybrid structure of graphene and NPs to 2D. Introducing three-dimensionality to the hybrid structure would allow higher detection sensitivity of target analytes by utilizing the three-dimensional (3D) focal volume. Here, we report a mechanical self-assembly strategy to enable a new class of 3D crumpled graphene-gold (Au) NPs hybrid nanoplasmonic structures for SERS applications. We achieve a 3D crumpled graphene-Au NPs hybrid structure by the delamination and buckling of graphene on a thermally activated, shrinking polymer substrate. We also show the precise control and optimization of the size and spacing of integrated Au NPs on crumpled graphene and demonstrate the optimized NPs' size and spacing for higher SERS enhancement. The 3D crumpled graphene-Au NPs exhibits at least 1 order of magnitude higher SERS detection sensitivity than that of conventional, flat graphene-Au NPs. The hybrid structure is further adapted to arbitrary curvilinear structures for advanced, in situ, nonconventional, nanoplasmonic sensing applications. We believe that our approach shows a promising material platform for universally adaptable SERS substrate with high sensitivity.

Self-Aligned Plasmonic Nanopores by Optically Controlled Dielectric Breakdown

We present a novel cost-efficient method for the fabrication of high-quality self-aligned plasmonic nanopores by means of an optically controlled dielectric breakdown. Excitation of a plasmonic bowtie nanoantenna on a dielectric membrane localizes the high-voltage-driven breakdown of the membrane to the hotspot of the enhanced optical field, creating a nanopore that is automatically self-aligned to the plasmonic hotspot of the bowtie. We show that the approach provides precise control over the nanopore size and that these plasmonic nanopores can be used as single molecule DNA sensors with a performance matching that of TEM-drilled nanopores. The principle of optically controlled breakdown can also be used to fabricate nonplasmonic nanopores at a controlled position. Our novel fabrication process guarantees alignment of the nanopore with the optical hotspot of the nanoantenna, thus ensuring that pore-translocating biomolecules interact with the concentrated optical field that can be used for detection and manipulation of analytes.

Selectively Sized Graphene-Based Nanopores for in Situ Single Molecule Sensing

The use of nanopore biosensors is set to be extremely important in developing precise single molecule detectors and providing highly sensitive advanced analysis of biological molecules. The precise tailoring of nanopore size is a significant step toward achieving this, as it would allow for a nanopore to be tuned to a corresponding analyte. The work presented here details a methodology for selectively opening nanopores in real-time. The tunable nanopores on a quartz nanopipette platform are fabricated using the electroetching of a graphene-based membrane constructed from individual graphene nanoflakes (ø ∼30 nm). The device design allows for in situ opening of the graphene membrane, from fully closed to fully opened (ø ∼25 nm), a feature that has yet to be reported in the literature. The translocation of DNA is studied as the pore size is varied, allowing for subfeatures of DNA to be detected with slower DNA translocations at smaller pore sizes, and the ability to observe trends as the pore is opened. This approach opens the door to creating a device that can be target to detect specific analytes.

Enhanced photoluminescence from CdS with SiO2 nanopillar arrays

In this paper, the enhanced photoluminescence from CdS thin film with SiO₂ nanopillar array (NPA) was demonstrated. The CdS was prepared using chemical bath deposition in a solution bath containing CdSO₄, SC(NH₂)₂, and NH₄OH. The SiO₂ NPA was fabricated by the nanosphere lithography (NSL) techniques. The nanopillar is about 50 nm in diameter, and the height is 150 nm. As a result, the sample with NPA shows an obvious improvement of photoluminescence (PL), compared with the one without NPA. In addition, we also observed that the PL intensity is increased ~5 times if the active layer is deposited on the nanopillar arrays and covered by a thin metal film of Al. It is noteworthy that the enhancement of photoluminescence could be attributed to the roughness of the surface, the 2D photonic band gap (PBG) effect and the surface plasmon resonance (SPR) effects.

Temperature dependence of DNA translocations through solid-state nanopores

In order to gain a better physical understanding of DNA translocations through solid-state nanopores, we study the temperature dependence of λ-DNA translocations through 10 nm diameter silicon nitride nanopores, both experimentally and theoretically. The measured ionic conductance G, the DNA-induced ionic-conductance blockades [Formula: see text] and the event frequency Γ all increase with increasing temperature while the DNA translocation time τ decreases. G and [Formula: see text] are accurately described when bulk and surface conductances of the nanopore are considered and access resistance is incorporated appropriately. Viscous drag on the untranslocated part of the DNA coil is found to dominate the temperature dependence of the translocation times and the event rate is well described by a balance between diffusion and electrophoretic motion. The good fit between modeled and measured properties of DNA translocations through solid-state nanopores in this first comprehensive temperature study, suggest that our model captures the relevant physics of the process.

Precise attoliter temperature control of nanopore sensors using a nanoplasmonic bullseye

Targeted temperature control in nanopores is greatly important in further understanding biological molecules. Such control would extend the range of examinable molecules and facilitate advanced analysis, including the characterization of temperature-dependent molecule conformations. The work presented within details well-defined plasmonic gold bullseye and silicon nitride nanopore membranes. The bullseye nanoantennae are designed and optimized using simulations and theoretical calculations for interaction with 632.8 nm laser light. Laser heating was monitored experimentally through nanopore conductance measurements. The precise heating of nanopores is demonstrated while minimizing the accumulation of heat in the surrounding membrane material.