Optimizing broadband terahertz modulation with hybrid graphene/metasurface structures

Broadband High Optical Transparent Intelligent Metasurface for Adaptive Electromagnetic Wave Manipulation

Intelligent metasurfaces have garnered widespread attention owing to their properties of sensing electromagnetic (EM) environments and multifunctional adaptive EM wave manipulation. However, intelligent metasurfaces with broadband high optical transparency have not been studied to date, and most of the previous intelligent metasurfaces lack an integrated design for their actuators and sensors, resulting in lower integration levels. This study proposes a novel intelligent metasurface with adaptive EM wave manipulation ability and high optical transparency from visible to infrared bands. This metasurface consists of a transparent and current-controlled reconfigurable metasurface as an actuator by integrating patterned vanadium dioxide (VO2) into metal-meshed resonant units, transparent broadband microstrip antenna as a sensor, recognition-and-feedback module, and actuator- and sensor-integrated design on the same substrate. The EM-regulating capability of the designed transparent intelligent metasurface is theoretically analyzed using the coupled mode theory, and a prototype metasurface device is fabricated for experimental verification. Simulation and experimental results demonstrate that the metasurface exhibits over 80% normalized transmittance from 380 to 5,000 nm and adaptive EM wave manipulation (reflective strong shielding function with a shielding efficiency of over 24 dB, high transmittance function with a transmission loss of 1.24 dB, and strong absorption function with an absorption of 97%) according to the EM wave power parameters without manual intervention. This study provides an avenue for transparent intelligent metasurfaces with extensive application prospects in areas such as intelligent optical windows, radar enclosures, and communication.

Angular-Dependent THz Modulator with Hybrid Metal-Graphene Metastructures

The coupling effects of surface plasmon resonance (SPR) from metamaterials induce variation in both the frequency and intensity of plasmonic modes. Here, we report an angular-dependent THz modulator with hybrid metal-graphene metastructures. The metastructures composed of the period gold split-rod arrays on top of a monolayer graphene, which show redshift modulation in the THz region with an increasing incident angle due to the strong out-of-plane magnetic flux introduced by the clockwise circular current at the oblique incidence. By utilizing graphene-based actively tunable conductor with ion-gel electrical gating, the THz transmission can be significantly modified. The modulation depth of the hybrid metal-graphene metastructure modulator can reach ~37.6% at 0.62 THz with a gate voltage of -3 V. The theoretical modeling of transmitted dependency on frequency and incident angle is demonstrated at different Fermi energies, which fits well with the experimental results. This hybrid device can offer a useful method for THz applications (such as angle sensors or angular-resolved spectroscopy), where angle-dependent modulation is needed.

Lightweight Machine-Learning Model for Efficient Design of Graphene-Based Microwave Metasurfaces for Versatile Absorption Performance

Graphene, as a widely used nanomaterial, has shown great flexibility in designing optically transparent microwave metasurfaces with broadband absorption. However, the design of graphene-based microwave metasurfaces relies on cumbersome parameter sweeping as well as the expertise of researchers. In this paper, we propose a machine-learning network which enables the forward prediction of reflection spectra and inverse design of versatile microwave absorbers. Techniques such as the normalization of input and transposed convolution layers are introduced in the machine-learning network to make the model lightweight and efficient. Particularly, the tunable conductivity of graphene enables a new degree in the intelligent design of metasurfaces. The inverse design system based on the optimization method is proposed for the versatile design of microwave absorbers. Representative cases are demonstrated, showing very promising performances on satisfying various absorption requirements. The proposed machine-learning network has significant potential for the intelligent design of graphene-based metasurfaces for various microwave applications.

Broadband radiation pressure on a small period diffractive film

The p-polarization component of radiation pressure force from an unpolarized blackbody light source is predicted by the use of a Maxwell equation solver for a right triangular prism grating of period 2 μm and refractive index 3.5. The transmitted and reflected angular scattering distributions are found to qualitatively agree with diffraction theory: At relatively short wavelengths the transmitted light is concentrated near the refraction angle, and reflected light is concentrated near the reflection angle. Owing to diffraction and multiple internal reflections, however, the spectral irradiance of transmitted and reflected light was found to significantly vary with wavelength. We found that the high value of the refractive index produced a large fraction of reflected light, thereby reducing the net transverse component of radiation pressure force. These results suggest that low index transmission gratings, anti-reflection coatings, optimized metasurface films, or reflection gratings should be explored for future solar sailing missions.

Recent Progress in Reconfigurable and Intelligent Metasurfaces: A Comprehensive Review of Tuning Mechanisms, Hardware Designs, and Applications

Intelligent metasurfaces have gained significant importance in recent years due to their ability to dynamically manipulate electromagnetic (EM) waves. Their multifunctional characteristics, realized by incorporating active elements into the metasurface designs, have huge potential in numerous novel devices and exciting applications. In this article, recent progress in the field of intelligent metasurfaces are reviewed, focusing particularly on tuning mechanisms, hardware designs, and applications. Reconfigurable and programmable metasurfaces, classified as space gradient, time modulated, and space-time modulated metasurfaces, are discussed. Then, reconfigurable intelligent surfaces (RISs) that can alter their wireless environments, and are considered as a promising technology for sixth-generation communication networks, are explored. Next, the recent progress made in simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) that can achieve full-space EM wave control are summarized. Finally, the perspective on the challenges and future directions of intelligent metasurfaces are presented.

Exploiting total internal reflection geometry for deep broadband terahertz modulation using a GaAs Schottky diode with integrated subwavelength metal microslits

We developed a GaAs Schottky diode with integrated periodic subwavelength metal microslits with total internal reflection (TIR) geometry to achieve deep broadband THz modulation at high frequency with low insertion loss. The non-resonant electric field enhancement effect in the subwavelength microslits intensifies the evanescent wave in TIR, which increases broadband absorbance of THz light signals by free carriers in the GaAs Schottky diode. Devices with various microslit spatial periods and gap widths were fabricated and measured. Among the devices, that with a microslit period of 10 µm and gap width of 2 µm produced ∼70% modulation depth at frequencies of 0.2 to 1.2 THz, while in the range of 0.25 to 0.4 THz, ∼90% modulation depth was achieved. By encapsulating the device in high refractive index material, ∼100% modulation depth was achieved in the range of 0.4 to 0.6 THz, the 3 dB bandwidth operational frequency was ∼160 kHz, and the insertion loss introduced by the device was less than 8 dB, which is much lower than existing metasurface-based THz modulators. In general, our first-generation device has improved modulation depth, operational bandwidth, insertion loss, and operational frequency. Optimization of the metal microslits, TIR geometry, and doped layer could further improve the performance of our design.

Graphene-based terahertz bias-driven negative-conductivity metasurface

A graphene-based terahertz negative-conductivity metasurface based on two types of unit cell structures is investigated under the control of an external bias voltage. Electrical characterization is conducted and verification is performed using a finite-difference time-domain (FDTD) and an optical-pump terahertz (THz)-probe system in terms of simulation and transient response analysis. Owing to the metal-like properties of graphene, a strong interaction between the metasurface and monolayer graphene yields a short-circuit effect, which considerably weakens the intensity of the resonance mode under passive conditions. Under active conditions, graphene, as an active load, actively induces a negative-conductivity effect, which enhances the THz transmission and recovers the resonance intensity gradually because of the weakening of the short-circuit effect. The resulting resonance frequency shows a blue shift. This study provides a reference value for combining graphene exhibiting the terahertz bias-driven negative-conductivity effect with metasurfaces and its corresponding applications in the future.

Programmable VO2 metasurface for terahertz wave beam steering

Programmable vanadium dioxide (VO₂) metasurface is proposed at THz frequencies. The insulating and metallic states of VO₂ can be switched via external electrical stimulation, resulting in the dynamical modulation of electromagnetic response. The voltages of different columns of the metasurface can be controlled by the field-programmable gate array, and thus the phase gradients are realized for THz beam steering. In 1-bit coding, we design periodic and nonperiodic 24 × 24 coding sequences, and achieve wide-angle beam scanning with the deflection angles from −60° to +60°. In 2-bit coding, we use two different meta-atoms to design 18 × 18 coding sequences. Compared with 1-bit coding, 2-bit coding has more degree of freedom to control the optical phase, and 3 dB diffraction efficiency is improved by generating a single deflection angle. The proposed programmable metasurfaces provide a promising platform for manipulating electromagnetic wave in 6G wireless communication.

•

The reversible phase-transition material VO₂ is integrated into the metasurface

•

Programmable VO₂ metasurfaces are proposed to achieve THz beam steering

•

Wide-angle beam scanning from −60° to +60° is realized in the digitalized metasurface

Tunable terahertz metasurface platform based on CVD graphene plasmonics

Graphene plasmonics provides a powerful means to extend the reach of metasurface technology to the terahertz spectral region, with the distinct advantage of active tunability. Here we introduce a comprehensive design platform for the development of THz metasurfaces capable of complex wavefront manipulation functionalities, based on ribbon-shaped graphene plasmonic resonators combined with metallic antennas on a vertical cavity. Importantly, this approach is compatible with the electrical characteristics of graphene grown by chemical vapor deposition (CVD), which can provide the required mm-scale dimensions unlike higher-mobility exfoliated samples. We present a single device structure that can be electrically reconfigured to enable multiple functionalities with practical performance metrics, including tunable beam steering and focusing with variable numerical aperture. These capabilities are promising for a significant impact in a wide range of THz technologies for sensing, imaging, and future wireless communications.

Full 360° Terahertz Dynamic Phase Modulation Based on Doubly Resonant Graphene-Metal Hybrid Metasurfaces

Dynamic phase modulation is vital for tuneable focusing, beaming, polarisation conversion and holography. However, it remains challenging to achieve full 360° dynamic phase modulation while maintaining high reflectance or transmittance based on metamaterials or metasurfaces in the terahertz regime. Here, we propose a doubly resonant graphene–metal hybrid metasurface to address this challenge. Simulation results show that by varying the graphene Fermi energy, the proposed metasurface with two shifting resonances is capable of providing dynamic phase modulation covering a range of 361° while maintaining relatively high reflectance above 20% at 1.05 THz. Based on the phase profile design, dynamically tuneable beam steering and focusing were numerically demonstrated. We expect that this work will advance the engineering of graphene metasurfaces for the dynamic manipulation of terahertz waves.

High-Quality Graphene-Based Tunable Absorber Based on Double-Side Coupled-Cavity Effect

Graphene-based devices have important applications attributed to their superior performance and flexible tunability in practice. In this paper, a new kind of absorber with monolayer graphene sandwiched between two layers of dielectric rings is proposed. Two peaks with almost complete absorption are realized. The mechanism is that the double-layer dielectric rings added to both sides of the graphene layer are equivalent to resonators, whose double-side coupled-cavity effect can make the incident electromagnetic wave highly localized in the upper and lower surfaces of graphene layer simultaneously, leading to significant enhancement in the absorption of graphene. Furthermore, the influence of geometrical parameters on absorption performance is investigated in detail. Also, the device can be actively manipulated after fabrication through varying the chemical potential of graphene. As a result, the frequency shifts of the two absorption peaks can reach as large as 2.82 THz/eV and 3.83 THz/eV, respectively. Such a device could be used as tunable absorbers and other functional devices, such as multichannel filters, chemical/biochemical modulators and sensors.

Polarization-Insensitive Broadband THz Absorber Based on Circular Graphene Patches

A polarization-insensitive broadband terahertz absorber based on single-layer graphene metasurface has been designed and simulated, in which the graphene metasurface is composed of isolated circular patches. After simulation and optimization, the absorption bandwidth of this absorber with more than 90% absorptance is up to 2 THz. The simulation results demonstrate that the broadband absorption can be achieved by combining the localized surface plasmon (LSP) resonances on the graphene patches and the resonances caused by the coupling between them. The absorption bandwidth can be changed by changing the chemical potential of graphene and the structural parameters. Due to the symmetrical configuration, the proposed absorber is completely insensitive to polarization and have the characteristics of wide angle oblique incidence that they can achieve broadband absorption with 70% absorptance in the range of incident angle from 0° to 50° for both TE and TM polarized waves. The flexible and simple design, polarization insensitive, wide-angle incident, broadband and high absorption properties make it possible for our proposed absorber to have promising applications in terahertz detection, imaging and cloaking objects.

Deep THz modulation at Fabry-Perot resonances using graphene in periodic microslits

Potential applications of terahertz (THz) radiation are constantly being investigated for high-speed communication due to its large bandwidth. For example, frequency hopping communication technology would benefit from the large bandwidth. To attach the information to the carrier wave, THz modulators with deep and stable modulation at different frequencies are crucial, yet are still lacking. Here a THz modulator, designed by integrating a non-resonant field enhancement effect of periodic metal microslits to assist a Fabry-Perot resonance structure (MS-FP) is proposed and demonstrated. New equations are developed to describe the superior performance of the novel design. The >95% modulation depth is achieved by a SiO₂/Si gated graphene device at 14 Fabry-Perot resonant frequencies across 1.4 THz bandwidth, outperforming the recently reported 75% modulation depth THz modulator with a similar Fabry-Perot structure.

Strong Terahertz Absorption of Monolayer Graphene Embedded into a Microcavity

Terahertz reflection behaviors of metallic-grating-dielectric-metal (MGDM) microcavity with a monolayer graphene embedded into the dielectric layer are theoretically investigated. A tunable wideband reflection dip at about the Fabry–Pérot resonant frequency of the structure is found. The reflectance at the dip frequency can be electrically tuned in the range of 96.5% and 8.8%. Because of the subwavelength distance between the metallic grating and the monolayer graphene, both of the evanescent grating slit waveguide modes and the evanescent Rayleigh modes play key roles in the strong absorption by the graphene layer. The dependence of reflection behaviors on the carrier scattering rate of graphene is analyzed. A prototype MGDM-graphene structure is fabricated to verify the theoretical analysis. Our investigations are helpful for the developments of electrically controlled terahertz modulators, switches, and reconfigurable antennas based on the MGDM-graphene structures.

Broadband Terahertz Near-Perfect Absorbers

Broadband terahertz (THz) absorbers are highly desired in detection, modulation, receiving, and imaging devices. We report the design and successful implementation of a novel broadband THz metasurface with a near-perfect absorption. Different from the traditional metal/dielectric/metal three-layer structures, the as-designed THz absorber has one more metal layer and a dielectric spacer on top, both of which are 200 nm thick. Although the total thickness increased by ∼7%, the near-perfect THz absorption band significantly broadened by 4×, achieving a broadband absorption of 270 GHz. Broadband, polarization-insensitive, and near-perfect THz absorptions were also observed over wide incident angles in these meta-absorbers, where the electric field and power loss were mainly concentrated in the additional thin dielectric layer. Such a broadband THz absorption was achieved through electromagnetic coupling between the top and middle metal layers and the resultant overlapping of the resonance frequencies. This strategy can be adapted to other spectrum-shaping devices.

Sensitive Terahertz Detection and Imaging Driven by the Photothermoelectric Effect in Ultrashort-Channel Black Phosphorus Devices

Terahertz (THz) photon detection is of particular appealing for myriad applications, but it still lags behind efficient manipulation with electronics and photonics due to the lack of a suitable principle satisfying both high sensitivity and fast response at room temperature. Here, a new strategy is proposed to overcome these limitations by exploring the photothermoelectric (PTE) effect in an ultrashort (down to 30 nm) channel with black phosphorus as a photoactive material. The preferential flow of hot carriers is enabled by the asymmetric Cr/Au and Ti/Au metallization with the titled-angle evaporation technique. Most intriguingly, orders of magnitude field-enhancement beyond the skin-depth limit and photon absorption across a broadband frequency can be achieved. The PTE detector has excellent sensitivity of 297 V W^-1, noise equivalent power less than 58 pW/Hz^0.5, and response time below 0.8 ms, which is superior to other thermal-based detectors at room temperature. A rigorous comparison with existing THz detectors, together with verification by further optical-pumping and imaging experiments, substantiates the importance of the localized field effect in the skin-depth limit. The results allow solid understanding on the role of PTE effect played in the THz photoresponse, opening up new opportunities for developing highly sensitive THz detectors for addressing targeted applications.

Dynamically tuning polarizations of electromagnetic fields based on hybrid skew-resonator-graphene meta-surfaces

We demonstrate the enhanced polarization modulation of electromagnetic fields through hybrid skew-ring-resonator-graphene meta-surfaces that can dynamically transform the linearly polarized waves into its cross-linearly polarized counterparts or the circularly polarized waves. Such a meta-surface consists of a grounded skew-ring resonator array inserted with a monolayer graphene sheet that controls the electromagnetic interactions between the skew-ring resonators and the ground. Especially, the reconfigurable characteristic of graphene enables the reflections to be capable of converting from the cross-linearly polarized fields to the circularly polarized waves by setting different Fermi energies with the same original co-linearly polarized incidence. Finally, we demonstrate that the bandwidth of the cross-polarization conversion would be greatly expanded when the monolayer graphene sheet is integrated with skew-bar-resonator meta-surfaces.

Nanoantenna enhanced terahertz interaction of biomolecules

Terahertz time-domain spectroscopy (THz-TDS) is a non-invasive, non-contact and label-free technique for biological and chemical sensing as THz-spectra are less energetic and lie in the characteristic vibration frequency regime of proteins and DNA molecules. However, THz-TDS is less sensitive for the detection of micro-organisms of size equal to or less than λ/100 (where, λ is the wavelength of the incident THz wave), and molecules in extremely low concentration solutions (like, a few femtomolar). After successful high-throughput fabrication of nanostructures, nanoantennas were found to be indispensable in enhancing the sensitivity of conventional THz-TDS. These nanostructures lead to strong THz field enhancement when in resonance with the absorption spectrum of absorptive molecules, causing significant changes in the magnitude of the transmission spectrum, therefore, enhancing the sensitivity and allowing the detection of molecules and biomaterials in extremely low concentration solutions. Herein, we review the recent developments in ultra-sensitive and selective nanogap biosensors. We have also provided an in-depth review of various high-throughput nanofabrication techniques. We also discussed the physics behind the field enhancements in the sub-skin depth as well as sub-nanometer sized nanogaps. We introduce finite-difference time-domain (FDTD) and molecular dynamics (MD) simulation tools to study THz biomolecular interactions. Finally, we provide a comprehensive account of nanoantenna enhanced sensing of viruses (like, H1N1) and biomolecules such as artificial sweeteners which are addictive and carcinogenic.

Surface Impedance of Metasurfaces/Graphene Hybrid Structures

Understanding and manipulation of surface impedance in graphene hybrid structure is a significant issue for applications of graphene-based optoelectronics devices. In order to achieve this purpose in the terahertz region, analytical expressions for the impedances of metasurface were derived, which allows us to easily understand the relationship between physical dimensions and impedance. Simulation results show an excellent agreement with the analytical predictions. In addition, we focus on the synthetic impedance when square patch and graphene sheet joined together, discuss the influence of the size of metasurface as well as chemical potentiality as for graphene on the synthetic impedance. Based on these results, a number of absorbers as well as optical devices can be designed that utilize impedance metasurfaces.

Giant dual-mode graphene-based terahertz modulator enabled by Fabry-Perot assisted multiple reflection

We report a high-performance terahertz (THz) modulator with dual operation mode. For the pulse operation mode, the proposed THz modulator has the advantage of high modulation depth (MD) and can operate in a broadband frequency range. We have experimentally achieved a MD larger than 90% for the fifth-order pulse THz echo at 0.8 THz, and the MD stays larger than 75% in a broadband frequency range larger than 1 THz, whereas, for the coherent operation mode, the Fabry-Perot (F-P) interference effect has been taken into consideration and a MD larger than 75% at 0.76 THz has also been realized.

Tunable/Reconfigurable Metasurfaces: Physics and Applications

Metasurfaces, ultrathin metamaterials constructed by planar meta-atoms with tailored electromagnetic (EM) responses, have attracted tremendous attention due to their exotic abilities to freely control EM waves. With active elements incorporated into metasurface designs, one can realize tunable and/or reconfigurable metadevices with functionalities controlled by external stimuli, opening a new platform to dynamically manipulate EM waves. In this article, we briefly review recent progress on tunable/reconfigurable metasurfaces, focusing on their working mechanisms and practical applications. We first describe available approaches, categorized into different classes based on external stimuli applied, to realize homogeneous tunable/reconfigurable metasurfaces, which can offer uniform manipulations on EM waves. We next summarize recent achievements on inhomogeneous tunable/reconfigurable metasurfaces with constitutional meta-atoms locally tuned by external knobs, which can dynamically control the wave-fronts of EM waves. We conclude this review by presenting our own perspectives on possible future directions and existing challenges in this fast developing field.

Strong polarization-dependent terahertz modulation of aligned Ag nanowires on Si substrate

Optically tunable, strong polarization-dependent transmission of terahertz pulses through aligned Ag nanowires on a Si substrate is demonstrated. Terahertz pulses primarily pass through the Ag nanowires and the transmittance is weakly dependent on the angle between the direction of polarization of the terahertz pulse and the direction of nanowire alignment. However, the transmission of a terahertz pulse through optically excited materials strongly depends on the polarization direction. The extinction ratio increases as the power of the pumping laser increases. The enhanced polarization dependency is explained by the redistribution of photocarriers, which accelerates the sintering effect along the direction of alignment of the Ag nanowires. The photocarrier redistribution effect is examined by the enhancement of terahertz emission from the sample. Oblique metal nanowires on Si could be utilized for designing optically tunable terahertz polarization modulators.

Electronically Tunable Perfect Absorption in Graphene

The demand for dynamically tunable light modulation in flat optics applications has grown in recent years. Graphene nanostructures have been extensively studied as means of creating large effective index tunability, motivated by theoretical predictions of the potential for unity absorption in resonantly excited graphene nanostructures. However, the poor radiative coupling to graphene plasmonic nanoresonators and low graphene carrier mobilities from imperfections in processed graphene samples have led to low modulation depths in experimental attempts at creating tunable absorption in graphene devices. Here we demonstrate electronically tunable perfect absorption in graphene, covering less than 10% of the surface area, by incorporating multiscale nanophotonic structures composed of a low-permittivity substrate and subwavelength noble metal plasmonic antennas to enhance the radiative coupling to deep subwavelength graphene nanoresonators. To design the structures, we devised a graphical method based on effective surface admittance, elucidating the origin of perfect absorption arising from critical coupling between radiation and graphene plasmonic modes. Experimental measurements reveal 96.9% absorption in the graphene plasmonic nanostructure at 1389 cm^-1, with an on/off modulation efficiency of 95.9% in reflection.

Reconfigurable metamaterials for terahertz wave manipulation

Reconfigurable metamaterials have emerged as promising platforms for manipulating the spectral and spatial properties of terahertz waves without being limited by the characteristics of naturally existing materials. Here, we present a comprehensive overview of various types of reconfigurable metamaterials that are utilized to manipulate the intensity, phase, polarization, and propagation direction of terahertz waves. We discuss various reconfiguration mechanisms based on optical, electrical, thermal, and mechanical stimuli while using semiconductors, superconductors, phase-change materials, graphene, and electromechanical structures. The advantages and disadvantages of different reconfigurable metamaterial designs in terms of modulation efficiency, modulation bandwidth, modulation speed, and system complexity are discussed in detail.

An Ultrafast Switchable Terahertz Polarization Modulator Based on III-V Semiconductor Nanowires

Progress in the terahertz (THz) region of the electromagnetic spectrum is undergoing major advances, with advanced THz sources and detectors being developed at a rapid pace. Yet, ultrafast THz communication is still to be realized, owing to the lack of practical and effective THz modulators. Here, we present a novel ultrafast active THz polarization modulator based on GaAs semiconductor nanowires arranged in a wire-grid configuration. We utilize an optical pump-terahertz probe spectroscopy system and vary the polarization of the optical pump beam to demonstrate ultrafast THz modulation with a switching time of less than 5 ps and a modulation depth of -8 dB. We achieve an extinction of over 13% and a dynamic range of -9 dB, comparable to microsecond-switchable graphene- and metamaterial-based THz modulators, and surpassing the performance of optically switchable carbon nanotube THz polarizers. We show a broad bandwidth for THz modulation between 0.1 and 4 THz. Thus, this work presents the first THz modulator which combines not only a large modulation depth but also a broad bandwidth and picosecond time resolution for THz intensity and phase modulation, making it an ideal candidate for ultrafast THz communication.

Microwave Study of Field-Effect Devices Based on Graphene/Aluminum Nitride/Graphene Structures

Metallic gate electrodes are often employed to control the conductivity of graphene based field effect devices. The lack of transparency of such electrodes in many optical applications is a key limiting factor. We demonstrate a working concept of a double layer graphene field effect device that utilizes a thin film of sputtered aluminum nitride as dielectric gate material. For this system, we show that the graphene resistance can be modified by a voltage between the two graphene layers. We study how a second gate voltage applied to the silicon back gate modifies the measured microwave transport data at around 8.7 GHz. As confirmed by numerical simulations based on the Boltzmann equation, this system resembles a parallel circuit of two graphene layers with different intrinsic doping levels. The obtained experimental results indicate that the graphene-aluminum nitride-graphene device concept presents a promising technology platform for terahertz- to- optical devices as well as radio-frequency acoustic devices where piezoelectricity in aluminum nitride can also be exploited.

Terahertz modulation induced by filament interaction

We experimentally demonstrated that nonlinear filament interaction could spectrally modulate terahertz (THz) radiation generated from asymmetric two-color filaments. It was the spatial plasma density modulation in plasma channels that induced the THz spectral modulation. As a result of optical manipulation of electron density in the filamentary plasma gratings, the proportion of high-frequency THz spectra increased, while that of low-frequency THz spectra decreased, indicating that the increase of free electron density in the filamentary plasma grating brought about THz frequency upshifts.

Enhanced infrared transmission through gold nanoslit arrays via surface plasmons in continuous graphene

Graphene is a monolayer plasmonic material that has been widely studied in the area of plasmonics and nanophotonics. Combining graphene with traditional plasmonic structures provides new opportunities and challenges. One particular application for nanostructured metals is enhanced optical transmission. However, extraordinary transmission (EOT) is known to have a frequency-selective performance due to size and periodicity of the nanohole arrays. Here, we propose to use a continuous graphene layer to enhance transmission through gold nanoslit arrays at mid-infrared (mid-IR) wavelengths. Although graphene absorbs 2.3% of light, by exciting surface plasmon polaritons (SPPs) at the graphene/gold nanoslit arrays interface, we have theoretically demonstrated enhanced infrared transmission over broad range of wavelengths in the mid-IR region. Our analyses of the effects of various structure parameters on the transmittance spectra shows that surface plasmon polaritons excited at the graphene/metal interface is responsible for enhanced transmission behavior. Moreover, calculated steady-state electric field distribution supports our predictions. Our work opens new directions to study 2D plasmonics using a continuous graphene film without the need of structuring it and also employs the broadband optical response of graphene to enable broadband extraordinary transmission enhancement.

Monolayer graphene sensing enabled by the strong Fano-resonant metasurface

Recent advances in graphene photonics reveal promising applications in the technologically important terahertz spectrum, where graphene-based active terahertz metamaterial modulators have been experimentally demonstrated. However, the sensitivity of the atomically thin graphene monolayer towards sharp Fano resonant terahertz metasurfaces remains unexplored. Here, we demonstrate thin-film sensing of the graphene monolayer with a high quality factor terahertz Fano resonance in metasurfaces consisting of a two-dimensional array of asymmetric resonators. A drastic change in the transmission amplitude of the Fano resonance was observed due to strong interactions between the monolayer graphene and the tightly confined electric fields in the capacitive gaps of the Fano resonator. The deep-subwavelength sensing of the atomically thin monolayer graphene further highlights the extreme sensitivity of the resonant electric field excited at the dark Fano resonance, allowing the detection of an analyte that is λ/1 000 000 thinner than the free space wavelength.

Terahertz Modulator based on Metamaterials integrated with Metal-Semiconductor-Metal Varactors

The terahertz (THz) band of the electromagnetic spectrum, with frequencies ranging from 300 GHz to 3 THz, has attracted wide interest in recent years owing to its potential applications in numerous areas. Significant progress has been made toward the development of devices capable of actively controlling terahertz waves; nonetheless, further advances in device functionality are necessary for employment of these devices in practical terahertz systems. Here, we demonstrate a low voltage, sharp switching terahertz modulator device based on metamaterials integrated with metal semiconductor metal (MSM) varactors, fabricated on an AlGaAs/InGaAs based heterostructure. By varying the applied voltage to the MSM-varactor located at the center of split ring resonator (SRR), the resonance frequency of the SRR-based metamaterial is altered. Upon varying the bias voltage from 0 V to 3 V, the resonance frequency exhibits a transition from 0.52 THz to 0.56 THz, resulting in a modulation depth of 45 percent with an insertion loss of 4.3 dB at 0.58 THz. This work demonstrates a new approach for realizing active terahertz devices with improved functionalities.

Broadband, Spectrally Flat, Graphene-based Terahertz Modulators

Advances in the efficient manipulation of terahertz waves are crucial for the further development of terahertz technology, promising applications in many diverse areas, such as biotechnology and spectroscopy, to name just a few. Due to its exceptional electronic and optical properties, graphene is a good candidate for terahertz electro-absorption modulators. However, graphene-based modulators demonstrated to date are limited in bandwidth due to Fabry-Perot oscillations in the modulators' substrate. Here, a novel method is demonstrated to design electrically controlled graphene-based modulators that can achieve broadband and spectrally flat modulation of terahertz beams. In our design, a graphene layer is sandwiched between a dielectric and a slightly doped substrate on a metal reflector. It is shown that the spectral dependence of the electric field intensity at the graphene layer can be dramatically modified by optimizing the structural parameters of the device. In this way, the electric field intensity can be spectrally flat and even compensate for the dispersion of the graphene conductivity, resulting in almost invariant absorption in a wide frequency range. Modulation depths up to 76% can be achieved within a fractional operational bandwidth of over 55%. It is expected that our modulator designs will enable the use of terahertz technology in applications requiring broadband operation.

Tunable Terahertz Hybrid Metal-Graphene Plasmons

We report here a new type of plasmon resonance that occurs when graphene is connected to a metal. These new plasmon modes offer the potential to incorporate a tunable plasmonic channel into a device with electrical contacts, a critical step toward practical graphene terahertz optoelectronics. Through theory and experiments, we demonstrate, for example, anomalously high resonant absorption or transmission when subwavelength graphene-filled apertures are introduced into an otherwise conductive layer. These tunable plasmon resonances are essential yet missing ingredients needed for terahertz filters, oscillators, detectors, and modulators.

Helicity multiplexed broadband metasurface holograms

Metasurfaces are engineered interfaces that contain a thin layer of plasmonic or dielectric nanostructures capable of manipulating light in a desirable manner. Advances in metasurfaces have led to various practical applications ranging from lensing to holography. Metasurface holograms that can be switched by the polarization state of incident light have been demonstrated for achieving polarization multiplexed functionalities. However, practical application of these devices has been limited by their capability for achieving high efficiency and high image quality. Here we experimentally demonstrate a helicity multiplexed metasurface hologram with high efficiency and good image fidelity over a broad range of frequencies. The metasurface hologram features the combination of two sets of hologram patterns operating with opposite incident helicities. Two symmetrically distributed off-axis images are interchangeable by controlling the helicity of the input light. The demonstrated helicity multiplexed metasurface hologram with its high performance opens avenues for future applications with functionality switchable optical devices.

Gbps terahertz external modulator based on a composite metamaterial with a double-channel heterostructure

The past few decades have witnessed a substantial increase in terahertz (THz) research. Utilizing THz waves to transmit communication and imaging data has created a high demand for phase and amplitude modulation. However, current active THz devices, including modulators and switches, still cannot meet THz system demands. Double-channel heterostructures, an alternative semiconductor system, can support nanoscale two-dimensional electron gases (2DEGs) with high carrier concentration and mobility and provide a new way to develop active THz devices. In this Letter, we present a composite metamaterial structure that combines an equivalent collective dipolar array with a double-channel heterostructure to obtain an effective, ultrafast, and all-electronic grid-controlled THz modulator. Electrical control allows for resonant mode conversion between two different dipolar resonances in the active device, which significantly improves the modulation speed and depth. This THz modulator is the first to achieve a 1 GHz modulation speed and 85% modulation depth during real-time dynamic tests. Moreover, a 1.19 rad phase shift was realized. A wireless free-space-modulation THz communication system based on this external THz modulator was tested using 0.2 Gbps eye patterns. Therefore, this active composite metamaterial modulator provides a basis for the development of effective and ultrafast dynamic devices for THz wireless communication and imaging systems.