Serial silver clusters biomineralized by one peptide

The roles of templates consisting of amino acids in the synthesis and application of gold nanoclusters

Gold nanoclusters (AuNCs) with low toxicity, high photostability, and facile synthesis have attracted great attention. The ligand is of great significance in stabilizing AuNCs and regulating their properties. Ligands consisting of amino acids (proteins and peptides) are an ideal template for synthesizing applicative AuNCs due to their inherent bioactivity, biocompatibility, and accessibility. In this review, we summarize the correlation of the template consisting of amino acids with the properties of AuNCs by analyzing different peptide sequences. The selection of amino acids can regulate the fluorescence excitation/emission and intensity, size, cell uptake, and light absorption. By analyzing the role played by AuNCs stabilized by proteins and peptides in the application, universal rules and detailed performances of sensors, antibacterial agents, therapeutic reagents, and light absorbers are reviewed. This review can guide the template design and application of AuNCs when selecting proteins and peptides as ligands.

Facile preparation of dihydrolipoic acid-stabilized red-emitting silver nanoclusters as a sensitive fluorometric probe for sulfide ions detection

In this work, we report a smartphone-integrated paper-based sensor for the determination of sulfide ions (S2-) using water-soluble dihydrolipoic acid stabilized silver nanoclusters (DHLA-AgNCs) as a nanoprobe. The optical properties of red emitting fluorescent DHLA-AgNCs was confirmed by UV-visible, steady state flourometric spectroscopic studies. The HR-TEM analysis revealed that the morphology of DHLA-AgNCs was quasi spherical with a grain size of ∼ 5.2 nm. The DHLA-AgNCs exhibited bright red luminescence with strong emission band centered at 650 nm upon the excitation at 420 nm. The excellent fluorescence property of DHLA-AgNCs was further utilized for fluorometric determination of S2- ions. The DHLA-AgNCs can be effectively quenched by increasing concentration of S2- ions owing to the formation of Ag2S complex. The DHLA-AgNCs probe could detect S2- ions preferentially even in the presence of other possible interfering anions with a limit of detection of 32.71 nM. In addition, the proposed technique was effectively used to detect S2- ions in environmental water samples such as tap and drinking water. The detect S2- ions detection was assay and showed good agree compared with the conventional methylene blue approach and showed comparable results. Moreover, a smartphone-paper-based detection assay was developed using the DHLA-AgNCs probe for highly selective and sensitive determination of S2- ions.

Water-Soluble Chiral Ag29 Clusters Protected by Monothiol N-Acetyl-(S)-penicillamine Synthesized in One Pot

Despite significant advances in atomically precise Au clusters with chirality, Ag clusters with the relevant features are still less explored. In this study, we report successful synthesis of chiral Ag29 clusters protected by water-soluble monothiol in one pot, which is carried out by reducing Ag ions in the presence of N-acetyl-(S)-penicillamine (S-NAP) and triphenylphosphine (TPP) at 10 °C, yielding the Ag29(S-NAP)24 cluster. The obtained cluster is isolable as a solid-state powder. Optical absorption of Ag29(S-NAP)24 is almost identical with that of Ag29(R-DHLA)12, where DHLA denotes α-dihydrolipoic acid, and magnetic circular dichroism (MCD) results support the similarity of their electronic structures. The anisotropy factor of Ag29(S-NAP)24 is comparable to or larger than that of Ag29(R-DHLA)12, suggesting that the surface shell structure of Ag29(S-NAP)24 is inherently chiral, as has been observed for Ag29(R-DHLA)12. Then the use of enantiopure NAP would preferentially lead to a one-handed atomic arrangement in the clusters.

Green Synthesis of Antimicrobial Peptide-Protected Silver Nanoclusters with Regulated Antibacterial Behavior

The antibacterial system based on the silver element has been a very promising antibacterial material. However, the antibacterial activity of silver nanomaterials largely depends on their chemical composition and physical properties. Herein, we prepared ultrasmall silver nanoclusters by directly reducing silver ions with antimicrobial peptide in a green way. The positively charged peptide ligands drove the silver nanoclusters binding to bacteria by electrostatic attraction. Contrary to the large-sized silver nanomaterials, the ultrasmall silver nanoclusters were able to rapidly penetrate bacteria membranes via strong hydrophobic association, significantly promoting the generation of reactive oxygen species, and the subsequent high oxidative stress led to bacterial death. Moreover, the silver nanoclusters with antibacterial peptide ligand exhibited good stability, low cytotoxicity, and long-term antibacterial activity. Besides, synergistic enhancement of silver nanoclusters on antibacterial activity was observed. Therefore, the silver nanoclusters conjugated with the antimicrobial peptide can act as a synergistic antibacterial agent, in which their bio-interactions with bacteria have been regulated to achieve a rapid, long-lasting, and broad-spectrum antibacterial effect.

Peptide-metal nanohybrids (PMN): Promising entities for combating neurological maladies

Nanotherapeutics are gaining traction in the modern scenario because of their unique and distinct properties which separate them from macro materials. Among the nanoparticles, metal NPs (MNPs) have gained importance due to their distinct physicochemical and biological characteristics. Peptides also exhibit several important functions in humans. Different peptides have received approval as pharmaceuticals, and clinical trials have been commenced for several peptides. Peptides are also used as targeting ligands. Considering all the advantages offered by these two entities, the conjugation of MNPs with peptides has emerged as a potential strategy for achieving successful targeting, diagnosis, and therapy of various neurological pathologies.

Dual-Functional Capping Agent-Mediated Transformation of Silver Nanotriangles to Silver Nanoclusters for Dual-Mode Biosensing

The localized surface plasmon resonance (LSPR) property, depending on the structure (morphology and assembly) of nanoparticles, is very sensitive to the environmental fluctuation. Retaining the colorimetric effect derived from the LSPR property while introducing new optical properties (such as fluorescence) that provide supplementary information is an effective means to improve the controllability in structures and reproducibility in optical properties. DNA as a green and low-cost etching agent has been demonstrated to effectively control the morphology and optical properties (the blue shift of the LSPR peak) of the plasmonic nanoparticles. Herein, taking silver nanotriangles (AgNTs) as a proof of concept, we report a novel strategy to induce precisely tunable LSPR and fluorescence-composited dual-mode signals by using mono-DNA first as an etching agent for etching the morphology of AgNTs and later as a template for synthesizing fluorescent silver nanoclusters (AgNCs). In addition, common templates for synthesizing AgNCs, such as l-glutathione and bovine serum albumin, were demonstrated to have the capability to serve as etching agents. More importantly, these biomolecules as dual-functional capping agents (etching agents and templates) follow the size-dependent rule: as the size of the thiolated biomolecule increases, the blue shift of the LSPR peak increases; at the same time, the fluorescence intensity increases. The enzyme that can change the molecular weight (size) of the biomolecular substrates (DNA, peptides, and proteins) through an enzymatic cleavage reaction was explored to regulate the LSPR and fluorescent properties of the resulting nanoparticles (by etching of AgNTs and synthesis of AgNCs), achieving excellent performance in detection of cancer-related proteases. This study can be expanded to other biopolymers to impact both fundamental nanoscience and applications and provide powerful new tools for bioanalytical biosensors and nanomedicine.

Biomimetic mineralization based on self-assembling peptides

Biomimetic science has attracted great interest in the fields of chemistry, biology, materials science, and energy. Biomimetic mineralization is the process of synthesizing inorganic minerals under the control of organic molecules or biomolecules under mild conditions. Peptides are the motifs that constitute proteins, and can self-assemble into various hierarchical structures and show a high affinity for inorganic substances. Therefore, peptides can be used as building blocks for the synthesis of functional biomimetic materials. With the participation of peptides, the morphology, size, and composition of mineralized materials can be controlled precisely. Peptides not only provide well-defined templates for the nucleation and growth of inorganic nanomaterials but also have the potential to confer inorganic nanomaterials with high catalytic efficiency, selectivity, and biotherapeutic functions. In this review, we systematically summarize research progress in the formation mechanism, nanostructural manipulation, and applications of peptide-templated mineralized materials. These can further inspire researchers to design structurally complex and functionalized biomimetic materials with great promising applications.

One-Step Synthesis of Peptide-Gold Nanoclusters with Tunable Fluorescence and Enhanced Gene Delivery Efficiency

In this study, peptide-gold nanoclusters with tunable fluorescence were prepared by a simple "one-pot" method, which were used for gene localization and delivery in vivo to achieve efficient intracellular colocalization, uptake, and transfection. The efficiency of pDNA transfection was up to 70.6%, and there was no obvious cytotoxicity. This study proves that the simple-composition and bio-friendly peptide-gold nanoclusters are promising gene delivery carriers and can provide a powerful theoretical and experimental basis for the application of peptide-metal nanocomplexes in gene delivery and other biomedicine fields.

A fluorimetric test strip with suppressed "Coffee Ring Effect" for selective mercury ion analysis

Nowadays, test strips are widely applied, but their use is mostly limited to the qualitative or half-quantitative analysis of targets. The main reason for their limited use is the "Coffee Ring Effect" (CRE) of probe materials, which leads to a heterogeneous probe distribution and poor testing reproducibility and sensitivity. In the present work, a fluorescent test strip was fabricated with a suppressed CRE of silver nanocluster (AgNC) probes coated by gelatin (Gel) under vacuum-aided fast lyophilization. Uniform and stable deposition of AgNC probes was achieved onto the test strips with a high loading capacity. The AgNCs displayed specific responses to Hg²⁺ ions, allowing sensitive and quantitative analysis in the linear concentration ranges from 0.20 to 50000 nM with a limit of detection of 0.10 nM. Given the advantages of rapid and facile preparation, CRE suppression, high biocompatibility, and cost-effectiveness, such a fabrication protocol may pave the way for the design of various test strips-based devices for point-of-care analytical applications in the fields of environmental monitoring, food quality analysis, and clinical diagnostics.

Advancements in cell membrane camouflaged nanoparticles: A bioinspired platform for cancer therapy

The idea of employing natural cell membranes as a coating medium for nanoparticles (NPs) endows man-made vectors with natural capabilities and benefits. In addition to retaining the physicochemical characteristics of the NPs, the biomimetic NPs also have the functionality of source cell membranes. It has emerged as a promising approach to enhancing the properties of NPs for drug delivery, immune evasion, imaging, cancer-targeting, and phototherapy sensitivity. Several studies have been reported with a multitude of approaches to reengineering the surface of NPs using biological membranes. Owing to their low immunogenicity and intriguing biomimetic properties, cell-membrane-based biohybrid delivery systems have recently gained a lot of interest as therapeutic delivery systems. This review summarises different kinds of biomimetic NPs reported so far, their fabrication aspects, and their application in the biomedical field. Finally, it briefs on the latest advances available in this biohybrid concept.

Nanoarrays-propped in situ photoelectrochemical system for microRNA detection

The exploitation of accurate and robust photoelectrochemical (PEC) approaches in whole biosensing community counts on the smooth electrons transport and delicate biological design. An aptasensor using depositional rutile titanium dioxide/bismuth vanadate nanoarrays (TiO₂/BiVO₄ NAs) as photoanode generator and strand-displacement model as nucleic acid frame was developed for microRNA-155 (miRNA-155) detection root in original idea. Photoanode was fabricated via a three-step overlayer deposition procedure including hydrothermal method, electrodeposition and ion beam sputtering. With a sufficient dense of oriented arrays, it provided a solid substrate and fast electronic kinetics reaction during host-guest recognition. In situ yielding electron donors were integrated into the PEC system to provide the most accurate quantitative analysis. The nanoarrays-triggered PEC platform opens another potential perspective in biosensing.

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

Qualitative and Quantitative Analysis of Tumor Cell Invasion Using Au Clusters

Tumor invasion/metastasis is still the major cause of death in cancer patients. Membrane type-1 matrix metalloproteinase (MT1-MMP) is directly related to tumor invasion/metastasis. To accurately and quickly distinguish the risk of invasion/metastasis of primary tumor cells, it is urgent to develop a simple and precise quantitative method to distinguish the expression level of MT1-MMP. In this work, we have constructed red fluorescent Au clusters with peroxidase-like properties that could specifically bind to MT1-MMP on human cervical cancer cells. After MT1-MMP was labelled with Au clusters, we could visually see red fluorescence of MT1-MMP on cervical cancer cells via fluorescence microscopy and catalytic color imaging using an ordinary optical microscope. The constructed Au clusters contained 26 Au atoms; thus, the amount of MT1-MMP on cervical cancer cells could be accurately quantified using inductively coupled plasma mass spectrometry (ICP-MS). More importantly, the invasion/metastasis capabilities of the cervical cancer Siha, Caski and Hela cells with different MT1-MMP amounts could be accurately distinguished by fluorescence/catalysis qualitative imaging and ICP-MS quantitative analysis. This method of qualitative/quantitative analysis of tumor-associated proteins on cancer cells has great potential for accurately diagnosing aggressive tumor cells and assessment of their invasion/metastasis risk.

Recent advances in templated synthesis of metal nanoclusters and their applications in biosensing, bioimaging and theranostics

As a kind of promising nanomaterials, metal nanoclusters (MNCs) generally composed of several to hundreds of metal atoms have received increasing interest owing to their unique properties, such as ultrasmall size (<2 nm), fascinating physical and chemical properties, and so on. Recently, template-assisted synthesis of MNCs (e.g., Au, Ag, Cu, Pt and Cd) has attracted extensive attention in biological fields. Up to now, various templates (e.g., dendrimers, polymers, DNAs, proteins and peptides) with different configurations and spaces have been applied to prepare MNCs with the advantages of facile preparation, controllable size, good water-solubility and biocompatibility. Herein, we focus on the recent advances in the template-assisted synthesis of MNCs, including the templates used to synthesize MNCs, and their applications in biosensing, bioimaging, and disease theranostics. Finally, the challenges and future perspectives of template-assisted synthesized MNCs are highlighted. We believe that this review could not only arouse more interest in MNCs but also promote their further development and applications by presenting the recent advances in this area to researchers from various fields, such as chemistry, material science, physiology, biomedicine, and so on.

Catalytic Nanomaterials toward Atomic Levels for Biomedical Applications: From Metal Clusters to Single-Atom Catalysts

Single-atom catalysts (SACs) featuring the complete atomic utilization of metal, high-efficient catalytic activity, superior selectivity, and excellent stability have been emerged as a frontier in the catalytic field. Recently, increasing interests have been drawn to apply SACs in biomedical fields for enzyme-mimic catalysis and disease therapy. To fulfill the demand of precision and personalized medicine, precisely engineering the structure and active site toward atomic levels is a trend for nanomedicines, promoting the evolution of metal-based biomedical nanomaterials, particularly biocatalytic nanomaterials, from nanoparticles to clusters and now to SACs. This review outlines the syntheses, characterizations, and catalytic mechanisms of metal clusters and SACs, with a focus on their biomedical applications including biosensing, antibacterial therapy, and cancer therapy, as well as an emphasis on their in vivo biological safeties. Challenges and future perspectives are ultimately prospected for SACs in diverse biomedical applications.

Recent Advances in Bio-Templated Metallic Nanomaterial Synthesis and Electrocatalytic Applications

Developing metallic nanocatalysts with high reaction activity, selectivity and practical durability is a promising and active subfield in electrocatalysis. In the classical "bottom-up" approach to synthesize stable nanomaterials by chemical reduction, stabilizing additives such as polymers or organic surfactants must be present to cap the nanoparticle to prevent material bulk aggregation. In recent years, biological systems have emerged as green alternatives to support the uncoated inorganic components. One key advantage of biological templates is their inherent ability to produce nanostructures with controllable composition, facet, size and morphology under ecologically friendly synthetic conditions, which are difficult to achieve with traditional inorganic synthesis. In addition, through genetic engineering or bioconjugation, bio-templates can provide numerous possibilities for surface functionalization to incorporate specific binding sites for the target metals. Therefore, in bio-templated systems, the electrocatalytic performance of the formed nanocatalyst can be tuned by precisely controlling the material surface chemistry. With controlled improvements in size, morphology, facet exposure, surface area and electron conductivity, bio-inspired nanomaterials often exhibit enhanced catalytic activity towards electrode reactions. In this Review, recent research developments are presented in bio-approaches for metallic nanomaterial synthesis and their applications in electrocatalysis for sustainable energy storage and conversion systems.

A new fluorescence method for detection of famotidine based on polyethyleneimine-templated Ag nanoclusters

A rapid, simple, inexpensive fluorescence analysis method for determination of famotidine based on polyethyleneimine (PEI)-capped Ag nanoclusters (PEI-Ag NCs) was developed. The study showed that addition of famotidine could cause efficient quenching of PEI-Ag NC fluorescence, as the presence of famotidine could cause aggregation of Ag NCs and quench its fluorescence. The sensitivity and selectivity of the method were investigated and experimental conditions such as buffer type, pH, temperature, and reaction time were optimized. Under optimized conditions, the results showed a linear profile from 3.7 × 10^-8 to 3.7 × 10^-5 mol/L, and had a detection limit of 1.6 × 10^-9 mol/L (S/N = 3).

Establishing empirical design rules of nucleic acid templates for the synthesis of silver nanoclusters with tunable photoluminescence and functionalities towards targeted bioimaging applications

DNA-templated silver nanoclusters (AgNCs) are an emerging class of ultrasmall (<2 nm) fluorophores with increasing popularity for bioimaging due to their facile synthesis and tunable emission color. However, design rules correlating different nucleotide sequences with the photoemission properties of AgNCs are still largely unknown, preventing the rational design of DNA templates to fine-tune the emission color, brightness and functionalities of AgNCs for any targeted applications. Herein, we report a systematic investigation to understand the empirical influences of the four basic DNA nucleotides on AgNC synthesis and their effects on photoluminescence properties. After establishing the importance of nucleotide-Ag+ binding and AgNC encapsulation within DNA tetraplex structures, we then determined the unique attributes of each individual nucleobase using different combinations of systematically varied DNA templates. Using the empirical design rules established herein, we were able to predict the photoluminescence behaviours of AgNCs templated by complex aptamer sequences with specific binding affinity to human cancer cells, and to deliberately control their emission color by rational modifications of the DNA template sequences for targeted bioimaging. Our empirical findings from this systematic experimentation can contribute towards the rational design of DNA sequences to customise the photoluminescence properties and biofunctionalities of DNA-protected AgNCs towards multicolour targeted bioimaging applications.

Comparative study of gold and silver interactions with amino acids and nucleobases

Metal nanoclusters (NCs) have gained much attention in the last decade. In solution, metal nanoclusters can be stabilized by proteins, and, thus, exhibit many advantages in biocatalysis, biosensing, and bioimaging. In spite of much progress in the synthesis of polypeptide-stabilized gold (Au) clusters, their structure, as well as amino acid-cluster and amino acid-Au+ interactions, remain poorly understood. It is not entirely clear which amino acid (AA) residues and sites in the protein are preferred for binding. The understanding of NC-protein interactions and how they evolve in the polypeptide templates is the key to designing Au NCs. In this work, binding of gold ion Au+ and diatomic neutral gold nanocluster Au2 with a full set of α-proteinogenic amino acids is studied using Density Functional Theory (DFT) and the ab initio RI-MP2 method in order to find the preferred sites of gold interaction in proteins. We demonstrated that the interaction of gold cations and clusters with protonated and deprotonated amino acid residues do not differ greatly. The binding affinity of AAs to the Au2 cluster increases in the following order: Cys(-H+) > Asp(-H+) > Tyr(-H+) > Glu(-H+) > Arg > Gln, His, Met ≫ Asn, Pro, Trp > Lys, Tyr, Phe > His(+H+) > Asp > Lys(+H+) > Glu, Leu > Arg(+H+) > Ile, Val, Ala > Thr, Ser > Gly, Cys, which agrees with the available experimental data that gold cluster synthesis occurs in a wide range of pH - amino acid residues with different protonation states are involved in this process. The significant difference in the binding energy of metal atoms with nucleobases and amino acids apparently means that unlike on DNA templates, neutral metal atoms are strongly bound to amino acid residues and can't freely diffuse in a polypeptide globula. This fact allows one to conclude that formation of metal NCs in proteins occurs through the nucleation of reduced Au atoms bound to the neighboring amino acid residues, and the flexibility of the amino acid residue side-chains and protein chain as a whole plays a significant role in this process.

Chitosan-stabilized silver nanoclusters with luminescent, photothermal and antibacterial properties

The aim of this paper is to achieve in situ photochemical synthesis of silver nanoclusters (AgNCs) stabilized by the multiple-amine groups of chitosan (Ch@AgNCs) with luminescent and photothermal properties. Ch@AgNCs were obtained by applying a fast and simple methodology previously described by our group. Direct functionalization of AgNCs with chitosan template provided new nanohybrids directly in water solution, both in the presence or absence of oxygen. The formation of hybrid AgNCs could be monitored by the rapid increase of the absorption and emission maximum band with light irradiation time. New Ch@AgNCs not only present photoluminescent properties but also photothermal properties when irradiated with near infrared light (NIR), transducing efficiently NIR into heat and increasing the temperature of the medium up to 23 °C. The chitosan polymeric shell associated to AgNCs works as a protective support stabilizing the metal cores, facilitating the storage of nanohybrids and preserving luminescent, photothermal and bactericide properties.

Intramolecular Photoelectrochemical System Using Tyrosine-Modified Antibody-Targeted Peptide as Electron Donor for Detection of Biomarkers

An intramolecular photoelectrochemical (PEC) system is designed from the novel electron donor YYYHWRGWV (Y3-H) peptide ligand for the first time. The bifunctional nonapeptide cannot only rely on the HWRGWV sequence as a site-oriented immobilizer to recognize the crystallizable fragment (Fc) domains of the antibody but also acts as electron donors for PEC generation via three tyrosine (Y) of the N-terminal. The Bi₂WO₆/AgInS₂ heterojunction with a significant visible-light absorption is utilized as a photoelectric generator, and the motivation is ascribed to a proven proposition, namely, that short-wavelength illuminant radiates proteins, causing a decline in bioactivity of immune protein. An innovative biosensor is fabricated using the above strategies for the detection of CYFRA21-1, a biomarker of squamous cell lung carcinoma. This sort of PEC-based sensing platform shows convincing experimental data and could be an effective candidate for clinical application in the future due to their extremely skillful conception.

Temperature dependent molecular fluorescence of [Agm]n+ quantum clusters stabilized by phosphate glass networks

Molecule like silver quantum clusters ([Agm]n+ QCs) exhibit an ultrasmall size confinement resulting in efficient broadband fluorescence. However, free [Agm]n+ QCs are also chemically active, so their stabilization is required for practical applications. We report in this work a phosphate oxyfluoride glass network enabled stabilization strategy of [Agm]n+ QCs. A series of silver-doped P2O5-ZnF2-xAg glasses were prepared by a conventional melt-and-quench method. The NMR and XPS results reveal that two types of [P(O,F)4] tetrahedrons (Q1, Q2) form chain structures and Zn(iv) connects [P(O,F)4] chains into a 3-dimension network in the glasses. The frameworks with limited void spaces were designed to restrict the polymerization degree, m, of [Agm]n+ QCs; the negatively charged tetrahedrons were designed to restrict the charge, n, of [Agm]n+ QCs. Through optical and mass spectroscopy studies, silver quantum clusters, [Ag2]2+ and [Ag4]2+, were identified to be charge compensated by [ZnO4] tetrahedrons and surrounded with [P(O,F)4] complex anions. The fluorescence thus gives high quantum efficiencies of 55.2% and 83.4%, for P2O5-ZnF2-xAg glass stabilized [Ag2]2+ and [Ag4]2+ QCs, respectively. This further reveals that the peak fixed fluorescence of [Ag2]2+ and [Ag4]2+ can be described by molecular fluorescence mechanisms. These are parity-allowed singlet-singlet transitions (S1 → S0), parity-forbidden triplet-singlet transitions (T1 → S0) and intersystem crossings between singlets (S1) and triplets (T1). The phonon coupled intersystem crossing between singlets (S1) and triplets (T1) determines the phosphate stabilized [Ag4]2+ QCs to exhibit a series of temperature dependent fluorescence behaviors. These include fluorescence intensity (at 50-200 K), intensity ratio (FIR) (at 50-200 K), peak shift (at 100-300 K) and lifetime (at 300-450 K) with maximum sensitivities of 1.27% K-1, 0.94% K-1, 0.29% K-1 and 0.41% K-1, respectively. Therefore, phosphate stabilized [Ag4]2+ QCs can be applied as temperature sensing probes, especially at low temperatures (10-300 K) and for color-based visualized temperature sensors.

Biomolecule conjugated metal nanoclusters: bio-inspiration strategies, targeted therapeutics, and diagnostics

To help those suffering from viral infections and cancers, scientists are exploring enhanced therapeutic methods via metal nanoclusters (MNCs).

Protein-protected gold/silver alloy nanoclusters in metal-enhanced singlet oxygen generation and their correlation with photoluminescence

Photoluminescent noble metal nanoclusters (NCs, core size <2 nm) have recently emerged as a new type of photosensitizers advantageous over conventional photosensitizers due to their high singlet oxygen (¹O₂) generation efficiency, excellent photostability and water solubility, as well as good biocompatibility for photodynamic therapy and bioimaging. However, no correlation has been established between the intrinsic ¹O₂ generation and photoluminescence properties of metal NCs with their size, composition, and concentration, which is important to customize the molecule-like properties of NCs for different applications. Herein, we report a systematic study to uncover the rational design of bimetallic NCs with controllable ¹O₂ generation efficiency by tuning their compositions through spontaneous galvanic displacement reaction. A series of ultrasmall gold/silver alloy nanoclusters (AuAgNCs) were synthesized by reacting bovine serum albumin (BSA) protein-protected Ag₁₃NCs (13 Ag atoms/cluster) with varying concentrations of gold precursor at room temperature. It was found that the ¹O₂ generation efficiency of the resultant BSA-protected AuAgNCs were inversely correlated to their photoluminescence intensity. Interestingly, plasmonic gold nanoparticles (>10 nm) were also formed simultaneously by photobleaching of the BSA-AuAgNCs, leading to significant metal enhancement effect to the ¹O₂ generation rate much higher (~45 times) than that of the monometallic BSA-Ag₁₃NC. This versatile two-for-one strategy to develop next generation metal-enhanced bimetallic NC photosensitizers in one pot opens up new opportunities in designing advanced hybrid nanomaterials with complementary and/or enhanced functionalities.

Synthetic Genetic Circuits for Self-Actuated Cellular Nanomaterial Fabrication Devices

Genetically controlled synthetic biosystems are being developed to create nanoscale materials. These biosystems are modeled on the natural ability of living cells to synthesize materials: many organisms have dedicated proteins that synthesize a wide range of hard tissues and solid materials, such as nanomagnets and biosilica. We designed an autonomous living material synthesizing system consisting of engineered cells with genetic circuits that synthesize nanomaterials. The circuits encode a nanomaterial precursor-sensing module (sensor) coupled with a materials synthesis module. The sensor detects the presence of cadmium, gold, or iron ions, and this detection triggers the synthesis of the related nanomaterial-nucleating extracellular matrix. We demonstrate that when engineered cells sense the availability of a precursor ion, they express the corresponding extracellular matrix to form the nanomaterials. This proof-of-concept study shows that endowing cells with synthetic genetic circuits enables nanomaterial synthesis and has the potential to be extended to the synthesis of a variety of nanomaterials and biomaterials using a green approach.

Hydroxyapatite Formation on Self-Assembling Peptides with Differing Secondary Structures and Their Selective Adsorption for Proteins

Self-assembling peptides have been employed as biotemplates for biomineralization, as the morphologies and sizes of the inorganic materials can be easily controlled. We synthesized two types of highly ordered self-assembling peptides with different secondary structures and investigated the effects of secondary structures on hydroxyapatite (HAp) biomineralization of peptide templates. All as-synthesized HAp-peptides have a selective protein adsorption capacity for basic protein (e.g., cytochrome c and lysozyme). Moreover, the selectivity was improved as peptide amounts increased. In particular, peptide-HAp templated on β-sheet peptides adsorbed more cytochrome c than peptide-HAp with α-helix structures, due to the greater than 2-times carboxyl group density at their surfaces. It can be expected that self-assembled peptide-templated HAp may be used as carriers for protein immobilization in biosensing and bioseparation applications and as enzyme-stabilizing agents.

A Simple Approach to Design Proteins for the Sustainable Synthesis of Metal Nanoclusters

Metal nanoclusters (NCs) are considered ideal nanomaterials for biological applications owing to their strong photoluminescence (PL), excellent photostability, and good biocompatibility. This study presents a simple and versatile strategy to design proteins, via incorporation of a di-histidine cluster coordination site, for the sustainable synthesis and stabilization of metal NCs with different metal composition. The resulting protein-stabilized metal NCs (Prot-NCs) of gold, silver, and copper are highly photoluminescent and photostable, have a long shelf life, and are stable under physiological conditions. The biocompatibility of the clusters was demonstrated in cell cultures in which Prot-NCs showed efficient cell internalization without affecting cell viability or losing luminescence. Moreover, the approach is translatable to other proteins to obtain Prot-NCs for various biomedical applications such as cell imaging or labeling.

Surface Dynamics and Ligand-Core Interactions of Quantum Sized Photoluminescent Gold Nanoclusters

Quantum-sized metallic clusters protected by biological ligands represent a new class of luminescent materials; yet the understanding of structural information and photoluminescence origin of these ultrasmall clusters remains a challenge. Herein we systematically study the surface ligand dynamics and ligand-metal core interactions of peptide-protected gold nanoclusters (AuNCs) with combined experimental characterizations and theoretical molecular simulations. We show that the peptide sequence plays an important role in determining the surface peptide structuring, interfacial water dynamics and ligand-Au core interaction, which can be tailored by controlling peptide acetylation, constituent amino acid electron donating/withdrawing capacity, aromaticity/hydrophobicity and by adjusting environmental pH. Specifically, emission enhancement is achieved through increasing the electron density of surface ligands in proximity to the Au core, discouraging photoinduced quenching, and by reducing the amount of surface-bound water molecules. These findings provide key design principles for understanding the surface dynamics of peptide-protected nanoparticles and maximizing the photoluminescence of metallic clusters through the exploitation of biologically relevant ligand properties.

Multiplexed electrochemical immunoassay for two immunoglobulin proteins based on Cd and Cu nanocrystals

Herein, a simple and feasible electrochemical immunosensing method for simultaneous voltammetric detection of two immunoglobulin proteins, human IgG (HIgG) and rabbit IgG (RIgG), was developed using two distinguishable signal-generation tags on the same electrode. The immunosensor was prepared by immobilizing two Fab antibody fragments on a gold electrode. After this, Cu and Cd nanocrystals, as nanotags, were synthesized and functionalized with identical detection antibodies. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) were employed to characterize the Cu and Cd nanocrystals. The covalently modified electrode with the Fab antibody fragments through the Au-thiolate bond (to dispel the non-specific adsorption) was investigated via scanning electron microscopy (SEM). After the sandwiched immunoreaction, the antibody-modified nanocrystals were captured on the immunosensor, which could be interrogated in pH 3.5 HCl using square-wave anodic stripping voltammetry. Experimental results also indicated that the multiplexed immunoassay enabled the simultaneous detection of HIgG and RIgG in a single run with the similar linear range from 0.01 to 10 ng mL^-1, and the limits of detection (LODs) towards two analytes could be as low as 3.4 pg mL^-1 (at 3σ). Acceptable assay results on precision, reproducibility, specificity, and method accuracy were also acquired. Importantly, the newly designed strategy avoided cross-talk and enzymatic introduction as compared to conventional electrochemical immunoassays, thus exhibiting a promising potential in clinical applications.

Peptide-Templated Gold Clusters as Enzyme-Like Catalyst Boost Intracellular Oxidative Pressure and Induce Tumor-Specific Cell Apoptosis

Anticancer metallodrugs that aim to physiological characters unique to tumor microenvironment are expected to combat drug tolerance and side-effects. Recently, owing to the fact that reactive oxygen species' is closely related to the development of tumors, people are committed to developing metallodrugs with the capacity of improving the level of reactive oxygen species level toinduce oxidative stress in cancer cells. Herein, we demonstrated that peptide templated gold clusters with atomic precision preferably catalyze the transformation of hydrogen peroxide into superoxide anion in oxidative pressure-type tumor cells. Firstly, we successfully constructed gold clusters by rationally designing peptide sequences which targets integrin ανβ₃ overexpressed on glioblastoma cells. The superoxide anion, radical derived from hydrogen peroxide and catalyzed by gold clusters, was confirmed in vitro under pseudo-physiological conditions. Then, kinetic parameters were evaluated to verify the catalytic properties of gold clusters. Furthermore, these peptide decorated clusters can serve as special enzyme-like catalyst to convert endogenous hydrogen peroxide into superoxide anion, elevated intracellular reactive oxygen species levels, lower mitochondrial membrane potential, damage biomacromolecules, and trigger tumor cell apoptosis consequently.

Aprotinin Encapsulated Gold Nanoclusters: A Fluorescent Bioprobe with Dynamic Nuclear Targeting and Selective Detection of Trypsin and Heavy Metal

Fluorescence imaging has currently emerged as one of the most frequently used noninvasive imaging technologies to selectively monitor biological processes in living systems. In past decades, gold nanoclusters (Au NCs) has received increasing attraction because of their intrinsic fluorescence and their inherent biocompatibility. As a stabilizing and reducing agent, an abundant, sustainable, and widely used polypeptide derived drug molecule, aprotinin (Ap), is selected for the synthesis of Au nanoclusters (Ap-Au NCs) due to characteristic bioactivity, excellent biocompatibility, biodegradability, and non-allergenic character. Herein, Ap encapsulated Au NCs with desirable red fluorescence was facilely produced for the first time, which were subsequently used for cell imaging and detection of various analytes. Much interestingly, dynamically subcellular targeting  from the cytoplasm to the nucleus in HeLa cells was observed. Besides, it has shown that, the selective and quantitative detection of trypsin has been established by using Ap-Au NCs. Finally, Ap-Au NCs were readily used for quantitative detection of mercury and copper. The photoluminescence of the Ap-Au NCs was quenched with the addition of the aforementioned analytes. This study not only  discusses a multifunctional nanomaterial  for cell imaging, dynamically nuclear targeting and biosensing, but also opens crucial insights on the integration of funtional biomolecule with metal nanoclusters intended for extensively biomedical applications.

Silk fibroin-derived peptide directed silver nanoclusters for cell imaging

Fluorescent silver nanoclusters (Ag NCs) that are capable of emitting green light have been synthesized using a peptide derived from the C terminal of silk fibroin heavy chain (CSH) via a one-pot, green, and facile synthesis method. The emission was also found to be stable at the excitation wavelength and the fluorescence quantum yield of Ag NCs was measured to be 1.1%. Matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) indicated the presence of a range of Ag species that correspond to Ag1, Ag2, Ag3 and Ag4. Transmission electron microscopic analyses suggested that the formed particles are uniform and well dispersive with an average diameter of 2.5 nm. The Ag NCs were successfully applied to cell imaging in murine preosteoblast MC3T3-E1 cells. Finally, Ag NCs observed by MTT exhibited distinct cytotoxicity at CSH-Ag NCs concentrations of 600 μM. Based on the concept of utilizing a functional peptide from nature, this study demonstrates a novel approach to fabricate aqueous metal nanoclusters for tracking applications in bioimaging.

Turning On/Off the Anti-Tumor Effect of the Au Cluster via Atomically Controlling Its Molecular Size

We reported two Au clusters with precisely controlled molecular size (Au₅Peptide₃ and Au₂₂Peptide₁₀) showing different antitumor effects. In vitro, both Au₅Peptide₃ and Au₂₂Peptide₁₀ were well taken up by human nasopharyngeal cancer cells (CNE1 cells). However, only Au₅Peptide₃ significantly induced CNE1 cell apoptosis. Further studies showed that CNE1 cells took up Au₅Peptide₃ (1.98 × 10^-15 mol/cell), and 9% of them entered mitochondria (0.186 × 10^-15 mol/cell). As a comparison, the uptake of Au₂₂Peptide₁₀ was only half the amount of Au₅Peptide₃ (1.11 × 10^-15 mol/cell), and only 1% of them entered mitochondria (0.016 × 10^-15 mol/cell). That gave 11.6-fold more Au₅Peptide₃ in mitochondria of CNE1 cells than Au₂₂Peptide₁₀. Further cell studies revealed that the antitumor effect may be due to the enrichment of Au₅Peptide₃ in mitochondria. Au₅Peptide₃ slightly decreased the Mcl-1 (antiapoptotic protein of mitochondria) and significantly increased the Puma (pro-apoptotic protein of mitochondria) expression level in CNE1 cells, which resulted in mitochondrial transmembrane potential change and triggered the caspase 9-caspase 3-PARP pathway to induce CNE1 cell apoptosis. In vivo, CNE1 tumor growth was significantly suppressed by Au₅Peptide₃ in the xenograft model after 3 weeks of intraperitoneal injection. The TUNEL and immuno-histochemical studies of tumor tissue verified that CNE1 cell apoptosis was mainly via the Puma and Mcl-1 apoptosis pathway in the xenograft model, which matched the aforementioned CNE1 cell studies in vitro. The discovery of Au₅ but not Au₂₂ suppressing tumor growth via the mitochondria target was a breakthrough in the nanomedical field, as this provided a robust approach to turn on/off the nanoparticles' medical properties via atomically controlling their sizes.

Quantitative Analysis of Multiple Proteins of Different Invasive Tumor Cell Lines at the Same Single-Cell Level

Tumor cell invasion is pivotal to the development, metastasis, and prognosis of tumors. It is reported that the invasive ability of tumor cells is mainly dependent on the expression levels of membrane type-1 matrix metalloproteinase (MT1-MMP) and integrin α_V β₃ proteins on cell membranes. To precisely distinguish between tumor cells with different invasive abilities, it is important to establish a highly sensitive and precise quantification method to differentiate the expression levels of MT1-MMP and integrin α_V β₃ in the same single tumor cell at the same time. Herein, two functional peptides to construct red-emissive Au₂₆ clusters and green-emissive Ag₁₂ clusters are reported. Moreover, the Au₂₆ clusters and Ag₁₂ clusters have the ability to specifically target MT1-MMP and integrin α_V β₃ , respectively, in the same single cell at the same time. By utilizing the fluorescent properties and metallic compositions of metal clusters, the MT1-MMP and integrin α_V β₃ levels of the more invasive SiHa cells or the less invasive HeLa cells are simultaneously and quantitatively differentiated via laser ablation inductively coupled plasma mass spectrometry. This method of quantitatively detecting multiple invasive proteins on the same cell is of great value for accurately diagnosing aggressive tumors and monitoring the invasiveness of these tumors.

Renal Clearable Ag Nanodots for in Vivo Computer Tomography Imaging and Photothermal Therapy

Albumin-stabilized Ag nanodots (ANDs) are prepared by a one-step biomineralization method. The highly crystallized nanodots have ultrasmall sizes (approximately 5.8 nm) and robust X-ray attenuation (5.7313 HU per mM Ag). The unlabeled ANDs are directly excreted from the body via the urine after in vivo X-ray computer tomography (CT) imaging application. ANDs could be used as CT imaging agents and effective photothermal therapy agents. Tumor growth inhibition reaches 90.2% after photothermal treatment with ANDs. ANDs are promising tools for in vivo CT imaging and clearable near-infrared-triggered theranostic agents.

Site-Specific Biomimetic Precision Chemistry of Bimodal Contrast Agent with Modular Peptides for Tumor-Targeted Imaging

Various biomimetic nanoparticles have been fabricated for cancer nanotheranostics with a diverse range of proteins. However, the operating mechanisms of these reactions are still unclear, especially on the interaction between metal ions and protein, the precise binding sites, and the existence format of nanoparticles. Assuming the shortening of the amino acids sequence into several, namely short peptides, it would be much easier to investigate the biomimetic reaction mechanism. In this study, a modular peptide, possessing Au³⁺ ion coordination motifs and a Gd³⁺ ion chelation sequence, is designed and synthesized. This peptide is experimentally found effective in site-specific biomimetic synthesis of paramagnetic fluorescent gold nanoclusters (pAuNCs) with a quantum yield of 6.8%, deep red emission at 676 nm, and potent relaxivity. The gel electrophoresis result declares that the two imaging motifs in pAuNCs are quite stable. In vivo fluorescence-magnetic resonance bimodal imaging show significant tumor enhancement by pAuNCs in tumor-bearing mice. In vivo biodistribution and toxicity studies reveal that pAuNCs can be gradually cleared from the body without damage. This study presents a modular peptide that can incubate multifunctional nanoparticles in a biomimetic fashion and hopefully provides a strategy for the investigation of the mechanism of protein-mediated biomimetic synthesis.

Design, fabrication, and biomedical applications of bioinspired peptide–inorganic nanomaterial hybrids

We presented the design, composition, and typical biomedical applications of bioinspired peptide–inorganic nanomaterial hybrids.