Processing and characterization of stable, pH-sensitive layer-by-layer modified colloidal quantum dots

Nanoparticles in Polyelectrolyte Multilayer Layer-by-Layer (LbL) Films and Capsules—Key Enabling Components of Hybrid Coatings

Originally regarded as auxiliary additives, nanoparticles have become important constituents of polyelectrolyte multilayers. They represent the key components to enhance mechanical properties, enable activation by laser light or ultrasound, construct anisotropic and multicompartment structures, and facilitate the development of novel sensors and movable particles. Here, we discuss an increasingly important role of inorganic nanoparticles in the layer-by-layer assembly—effectively leading to the construction of the so-called hybrid coatings. The principles of assembly are discussed together with the properties of nanoparticles and layer-by-layer polymeric assembly essential in building hybrid coatings. Applications and emerging trends in development of such novel materials are also identified.

Ultrasonic atomizer based development of pH sensor for real time analysis

Fluorescent pH biosensors have gained importance owing to their low cost utilization in real time monitoring of biological and food samples in comparison to conventional pH meters. The research reports a novel method of ultrasonic atomization for developing a fluorescent pH sensor for real-time analysis made of Fluorescein isothiocyanate (FITC)-dextran/FITC-dextran-Tris (2, 2'-bipyridyl) dichlororuthenium (II) hexahydrate as indicator and reference fluorophores, respectively. The process of ultrasonic atomization ensures formation of monodisperse dye immobilized alginate microspheres ensuring efficient pH sensing. The developed biosensor was tested on milk samples, which has a short life span and shows a significant fall in pH with time due to microbial spoilage. The proposed biosensor showed a linear range of pH 4-8 (R2 between 0.96-0.99 for different single/dual fluorophore biosensors) which suitably cover the pH of milk during the entire storage period and spoilage. The % recovery for predicted pH falls between 90-110% compared against standard pH meter, indicating a good accuracy of estimation and low turnaround time (10 min). Thus, real-time monitoring using fluorescent pH biosensor for milk samples may profoundly improve the economics of losses occurring in processing and storage with capability of in-package continuous quality assessment.

Hydrogel Microdomain Encapsulation of Stable Functionalized Silver Nanoparticles for SERS pH and Urea Sensing

Conceptual and commercial examples of implantable sensors have been limited to a relatively small number of target analytes, with a strong focus on glucose monitoring. Recently, surface-enhanced Raman spectroscopy (SERS) pH sensors were demonstrated to track acid-producing enzymatic reactions targeting specific analytes. We show here that SERS pH tracking in the basic regime is also possible, and can be used to monitor urea concentration. To accomplish this, we developed a hydrogel consisting of polyelectrolyte multilayer microcapsules containing a SERS-sensitive pH reporter (4-mercapopyridine capped silver nanoparticles modified with bovine serum albumin). This pH sensing material exhibited a sensitive Raman scattering response to a wide range of pH from 6.5-9.7. By incorporating urease into the hydrogel matrix, the new sensor was capable of distinguishing urea concentrations of 0, 0.1, 1, and 10 mM. We also found that bovine serum albumin (BSA) prevented severe aggregation of the nanoparticle-based pH sensor, which improved sensing range and sensitivity. Furthermore, BSA safeguarded the pH sensor during the encapsulation procedure. Together, the combination of materials represents a novel approach to enabling optical sensing of reactions that generate pH changes in the basic range.

Fabrication of Hybrid Nanostructures Based on Fe3O4 Nanoclusters as Theranostic Agents for Magnetic Resonance Imaging and Drug Delivery

Combining anticancer drugs with inorganic nanocrystals to construct multifunctional hybrid nanostructures has become a powerful tool for cancer treatment and tumor suppression. However, it remains a critical challenge to synthesize compact, multifunctional nanostructures with improved functionality and reproducibility. In this study, we report the fabrication of magnetite hybrid nanostructures employing Fe3O4 nanoparticles (NPs) to form multifunctional magnetite nanoclusters (NCs) by combining an oil-in-water microemulsion assembly and a layer-by-layer (LBL) method. The Fe3O4 NCs were firstly prepared via a microemulsion self-assembly technique. Then, polyelectrolyte layers composed of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) and doxorubicin hydrochloride (DOX) were capped on Fe3O4 NCs to construct the Fe3O4 NC/PAH/PSS/DOX hybrid nanostructures via LBL method. The as-prepared hybrid nanostructures loaded with DOX demonstrated the pH-responsive drug release and higher cytotoxicity towards human lung cancer (A549) cells in vitro and can serve as T2-weighted magnetic resonance imaging (MRI) contrast agents, which can significantly improve T2 relaxivity and lead to a better cellular MRI contrast effect. The loaded DOX emitting red signals under excitation with 490 nm are suitable for bioimaging applications. This work provides a novel strategy to build a Fe3O4-based multifunctional theranostic nanoplatform with T2-weighted MRI, fluorescence imaging, and drug delivery.

Surface Engineered Protein Nanoparticles With Hyaluronic Acid Based Multilayers For Targeted Delivery Of Anticancer Agents

Layer-by-layer (LbL) technique was employed to modify the surface of doxorubicin (Dox)-loaded bovine serum albumin (BSA) nanoparticles using hyaluronic acid (HA) to enable targeted delivery to overexpressed CD44 receptors in metastatic breast cancer cells. LbL technique offers a versatile approach to modify the surface of colloidal nanoparticles without any covalent modification. Dox-loaded BSA (Dox Ab) nanoparticles optimized for their size, zeta potential, and drug encapsulation efficiency were prepared by modified desolvation technique. The cellular uptake and cytotoxicity of the LbL coated Dox Ab nanoparticles were analyzed in CD44 overexpressing breast cancer cell line MDA-MB-231. Nanoparticles with HA as the final layer (Dox Ab HA) showed maximum cellular uptake in MDA-MB-231 cells owing to the CD44 receptor-mediated endocytosis and hence, exhibited more cytotoxicity as compared to free Dox. Further, luciferase-transfected MDA-MB-231 cells were used to induce tumor in BALB/c female nude mice to enable whole body tumor imaging. The mice were imaged before and after Dox treatment to visualize the tumor growth. The in vivo biodistribution of Dox Ab HA nanoparticles in nude mice showed maximum accumulation in tumor, and importantly, better tumor reduction in comparison with free Dox, thus paving the way for improved drug delivery into tumors.

Layer-by-layer modification of high surface curvature nanoparticles with weak polyelectrolytes using a multiphase solvent precipitation process

The layer-by-layer modification of ≈5 nm mercaptocarboxylic acid stabilized gold nanoparticles was studied in an effort to illustrate effective means to overcome practical issues in handling and performing surface modification of such extremely small materials. To accomplish this, each layer deposition cycle was separated into a multi-step process wherein solution pH was controlled in two distinct phases of polyelectrolyte adsorption and centrifugation. Additionally, a solvent precipitation step was introduced to make processing more amenable by concentrating the sample and exchanging solution pH before ultracentrifugation. The pH-dependent assembly on gold nanoparticles was assessed after each layer deposition cycle by monitoring the plasmon peak absorbance location, surface charge, and the percentage of nanoparticles recovered. The selection of solution pH during the adsorption phase was found to be a critical parameter to enhance particle recovery and maximize surface charge when coating with weak polyelectrolytes. One bilayer was deposited with a high yield and the modified particles exhibited enhanced colloidal stability across a broad pH range and increased ionic strength. These findings support the adoption of this multi-step processing approach as an effective and generalizable approach to improve stability of high surface curvature particles.

Sulfobetaine-Vinylimidazole Block Copolymers: A Robust Quantum Dot Surface Chemistry Expanding Bioimaging's Horizons

Long-term inspection of biological phenomena requires probes of elevated intra- and extracellular stability and target biospecificity. The high fluorescence and photostability of quantum dot (QD) nanoparticles contributed to foster their promise as bioimaging tools that could overcome limitations associated with traditional fluorophores. However, QDs' potential as a bioimaging platform relies upon a precise control over the surface chemistry modifications of these nano-objects. Here, a zwitterion-vinylimidazole block copolymer ligand was synthesized, which regroups all anchoring groups in one compact terminal block, while the rest of the chain is endowed with antifouling and bioconjugation moieties. By further application of an oriented bioconjugation approach with whole IgG antibodies, QD nanobioconjugates were obtained that display outstanding intra- and extracellular stability as well as biorecognition capacity. Imaging the internalization and intracellular dynamics of a transmembrane cell receptor, the CB1 brain cannabinoid receptor, both in HEK293 cells and in neurons, illustrates the breadth of potential applications of these nanoprobes.

A multifunctional polymer combining the imidazole and zwitterion motifs as a biocompatible compact coating for quantum dots

We introduce a set of multicoordinating imidazole- and zwitterion-based ligands suited for surface functionalization of quantum dots (QDs). The polymeric ligands are built using a one-step nucleophilic addition reaction between poly(isobutylene-alt-maleic anhydride) and distinct amine-containing functionalities. This has allowed us to introduce several imidazole anchoring groups along the polymer chain for tight coordination to the QD surface and a controllable number of zwitterion moieties for water solubilization. It has also permitted the introduction of reactive and biomolecular groups for further conjugation and targeting. The QDs capped with these new ligands exhibit excellent long-term colloidal stability over a broad range of pH, toward excess electrolyte, in cell-growth media, and in the presence of natural reducing agents such as glutathione. These QDs are also resistant to the oxidizing agent H2O2. More importantly, by the use of zwitterion moieties as the hydrophilic block, this polymer design provides QDs with a thin coating and compact overall dimensions. These QDs are easily self-assembled with full size proteins expressed with a polyhistidine tag via metal-histidine coordination. Additionally, the incorporation of amine groups allows covalent coupling of the QDs to the neurotransmitter dopamine. This yields redox-active QD platforms that can be used to track pH changes and detect Fe ions and cysteine through charge-transfer interactions. Finally, we found that QDs cap-exchanged with folic acid-functionalized ligands could effectively target cancer cells, where folate-receptor-mediated endocytosis of QDs into living cells was time- and concentration-dependent.

Photoligation of an amphiphilic polymer with mixed coordination provides compact and reactive quantum dots

We introduce a new set of multicoordinating polymers as ligands that combine two distinct metal-chelating groups, lipoic acid and imidazole, for the surface functionalization of QDs. These ligands combine the benefits of thiol and imidazole coordination to reduce issues of thiol oxidation and weak binding affinity of imidazole. The ligand design relies on the introduction of controllable numbers of lipoic acid and histamine anchors, along with hydrophilic moieties and reactive functionalities, onto a poly(isobutylene-alt-maleic anhydride) chain via a one-step nucleophilic addition reaction. We further demonstrate that this design is fully compatible with a novel and mild photoligation strategy to promote the in situ ligand exchange and phase transfer of hydrophobic QDs to aqueous media under borohydride-free conditions. Ligation with these polymers provides highly fluorescent QDs that exhibit great long-term colloidal stability over a wide range of conditions, including a broad pH range (3-13), storage at nanomolar concentration, under ambient conditions, in 100% growth media, and in the presence of competing agents with strong reducing property. We further show that incorporating reactive groups in the ligands permits covalent conjugation of fluorescent dye and redox-active dopamine to the QDs, producing fluorescent platforms where emission is controlled/tuned by Förster Resonance Energy Transfer (FRET) or pH-dependent charge transfer (CT) interactions. Finally, the polymer-coated QDs have been coupled to cell-penetrating peptides to facilitate intracellular uptake, while subsequent cytotoxicity tests show no apparent decrease in cell viability.

Sustained drug release from an ultrathin hydrogel film

We reported a facile strategy to prepare a camptothecin-loaded ultrathin hydrogel film, which showed a sustained release of camptothecin in PBS.

Direct synthesis of highly stable nitrogen rich carbon dots toward white light emission

Here we report a single step, rapid synthetic strategy for white light emitting nitrogen rich carbon dots (NCDs) under a range of excitation wavelengths by carbonizing ethylenediamine using P₂O₅ and water.

Preparation of multi-shell structured fluorescent composite nanoparticles for ultrasensitive human procalcitonin detection

In this paper, we reported the preparation of carboxyl functionalized quantum dots (QDs)-embedded silica nanoparticles by combining layer-by-layer (LbL) self-assembly technique and a multi-layer protection method.