Voltage charging enhances ionic conductivity in gold nanotube membranes

Effect of Organic Cation Adsorption on Ion-Transport Selectivity in a Cation-Permselective Nanopore Membrane

A key knowledge gap in the emerging field of nanofluidics concerns how the ionic composition and ion-transport properties of a nanoconfined solution differ from those of a contacting bulk solution. We and others have been using potentiometric concentration cells, where a nanopore or nanotube membrane separates salt solutions of differing concentrations to explore this issue. The membranes studied contained a fixed pore/tube wall anionic charge, which ideally would prohibit anions and salt from entering the pore/tube-confined solution. We have been investigating experimental conditions that allow for this ideally permselective cation state to be achieved. Results of potentiometric investigations of a polymeric nanopore membrane (10 ± 2 nm-diameter pores) with anionic charge due to carbonate are presented here. While studies of this type have been reported using alkaline metal and alkaline earth cations, there have been no analogous studies using organic cations. This paper uses a homologous series of tetraalkylammonium ions to address this knowledge gap. The key result is that, in contrast to the inorganic cations, the ideal cation-permselective state could not be obtained under any experimental conditions for the organic cations. We propose that this is because these hydrophobic cations adsorb onto the polymeric pore walls. This makes ideality impossible because each adsorbed alkylammonium must bring a charge-balancing anion, Cl-, with it into the nanopore solution. The alkylammonium adsorption that occurred was confirmed and quantified by using surface contact angle measurements.

Influence of the Quantum Capacitance on Electrolyte Conductivity through Carbon Nanotubes

In recent experiments, unprecedentedly large values for the conductivity of electrolytes through carbon nanotubes (CNTs) have been measured, possibly owing to flow slip and a high pore surface charge density whose origin remains debated. Here, we model the coupling between the CNT quantum capacitance and the classical electrolyte-filled pore one and study how electrolyte transport is modulated when a gate voltage is applied to the CNT. Our work shows that under certain conditions the quantum capacitance is lower than the pore one due to the finite quasi-1D CNT electronic density of states and therefore controls the CNT surface charge density that dictates the confined electrolyte conductivity. The dependence of the computed surface charge and conductivity on reservoir salt concentration and gate voltage is thus intimately related to the electronic properties of the CNT. This approach provides key insight into why metallic CNTs have larger experimentally measured conductivities than semiconducting ones.

Modelling the Performance of Electrically Conductive Nanofiltration Membranes

Electrically conductive membranes are a class of stimuli-responsive materials, which allow the adjustment of selectivity for and the rejection of charged species by varying the surface potential. The electrical assistance provides a powerful tool for overcoming the selectivity-permeability trade-off due to its interaction with charged solutes, allowing the passage of neutral solvent molecules. In this work, a mathematical model for the nanofiltration of binary aqueous electrolytes by an electrically conductive membrane is proposed. The model takes into account the steric as well as Donnan exclusion of charged species due to the simultaneous presence of chemical and electronic surface charges. It is shown that the rejection reaches its minimum at the potential of zero charge (PZC), where the electronic and chemical charges compensate for each other. The rejection increases when the surface potential varies in positive and negative directions with respect to the PZC. The proposed model is successfully applied to a description of experimental data on the rejection of salts and anionic dyes by PANi-PSS/CNT and MXene/CNT nanofiltration membranes. The results provide new insights into the selectivity mechanisms of conductive membranes and can be employed to describe electrically enhanced nanofiltration processes.

Facile Synthesis and Environmental Applications of Noble Metal-Based Catalytic Membrane Reactors

Noble metal nanoparticle-loaded catalytic membrane reactors (CMRs) have emerged as a promising method for water decontamination. In this study, we proposed a convenient and green strategy to prepare gold nanoparticle (Au NPs)-loaded CMRs. First, the redox-active substrate membrane (CNT-MoS2) composed of carbon nanotube (CNT) and molybdenum disulfide (MoS2) was prepared by an impregnation method. Water-diluted Au(III) precursor (HAuCl4) was then spontaneously adsorbed on the CNT-MoS2 membrane only through filtration and reduced into Au(0) nanoparticles in situ, which involved a “adsorption–reduction” process between Au(III) and MoS2. The constructed CNT-MoS2@Au membrane demonstrated excellent catalytic activity and stability, where a complete 4-nitrophenol transformation can be obtained within a hydraulic residence time of <3.0 s. In addition, thanks to the electroactivity of CNT networks, the as-designed CMR could also be applied to the electrocatalytic reduction of bromate (>90%) at an applied voltage of −1 V. More importantly, by changing the precursors, one could further obtain the other noble metal-based CMR (e.g., CNT-MoS2@Pd) with superior (electro)catalytic activity. This study provided new insights for the rational design of high-performance CMRs toward various environmental applications.

The Ionic Composition and Chemistry of Nanopore-Confined Solutions

There is increasing interest in understanding the properties of solutions confined within nanotubes and synthetic or biological nanopores. How the ionic content of a nanopore-confined solution differs from that of a contacting bulk salt solution is of particular importance, for example, to water desalinization, industrial electrolysis, and all living systems. This paper explores ionic content, ionic interactions, and ion-transport properties of solutions confined within the 10 nm diameter pores of a synthetic polymer membrane. The membrane has a fixed negative pore-wall and surface charge due to ionizable carbonate groups. As a result, under some conditions, the nanopore-confined solution contains only cations and no anions or salt present in a contacting solution, ideal cation permselectivity. This anion- and salt-rejecting ability varies greatly with the cation of the salt, a result that is in contradiction to the prevailing model for permselectivity in nanopores. The extant model fails because it does not account for specific chemical interactions between the cation and the carbonate groups. The nature of these ion-selective interactions is discussed here.

Regional and functional division of functional elements of solid-state nanochannels for enhanced sensitivity and specificity of biosensing in complex matrices

Solid-state nanochannels (SSNs) provide a promising approach for biosensing due to the confinement of molecules inside, their great mechanical strength and diversified surface chemical properties; however, until now, their sensitivity and specificity have not satisfied the practical requirements of sensing applications, especially in complex matrices, i.e., media of diverse constitutions. Here, we report a protocol to achieve explicit regional and functional division of functional elements at the outer surface (FE_OS) and inner wall (FE_IW) of SSNs, which offers a nanochannel-based sensing platform with enhanced specificity and sensitivity. The protocol starts with the fabrication and characterization of the distribution of FE_OS and FE_IW. Then, the evaluation of the contributions of FE_OS and FE_IW to ionic gating is described; the FE_IW mainly regulate ionic gating, and the FE_OS can produce a synergistic effect. Finally, hydrophobic or highly charged FE_OS are applied to ward off interference molecules, non-target molecules that may affect the ionic signal of nanochannels, which decreases false signals and helps to achieve the highly specific ionic output in complex matrices. Compared with other methods currently available, this method will contribute to the fundamental understanding of substance transport in SSNs and provide high specificity and sensitivity in SSN-based analyses. The procedure takes 3-6 d to complete.

Glass/Au Composite Membranes with Gold Nanoparticles Synthesized inside Pores for Selective Ion Transport

Nanocomposite membranes have been actively developed in the last decade. The involvement of nanostructures can improve the permeability, selectivity, and anti-fouling properties of a membrane for improved filtration processes. In this work, we propose a novel type of ion-selective Glass/Au composite membrane based on porous glass (PG), which combines the advantages of porous media and promising selective properties. The latter are achieved by depositing gold nanoparticles into the membrane pores by the laser-induced liquid phase chemical deposition technique. Inside the pores, gold nanoparticles with an average diameter 25 nm were formed, which was confirmed by optical and microscopic studies. To study the transport and selective properties of the PG/Au composite membrane, the potentiometric method was applied. The uniform potential model was used to determine the surface charge from the experimental data. It was found that the formation of gold nanoparticles inside membrane pores leads to an increase in the surface charge from −2.75 mC/m² to −5.42 mC/m². The methods proposed in this work allow the creation of a whole family of composite materials based on porous glasses. In this case, conceptually, the synthesis of these materials will differ only in the selection of initial precursors.

The Effect of Voltage Charging on the Transport Properties of Gold Nanotube Membranes

Porous membranes are used in chemical separations and in many electrochemical processes and devices. Research on the transport properties of a unique class of porous membranes that contain monodisperse gold nanotubes traversing the entire membrane thickness is reviewed here. These gold nanotubes can act as conduits for ionic and molecular transports through the membrane. Because the tubes are electronically conductive, they can be electrochemically charged by applying a voltage to the membrane. How this "voltage charging" affects the transport properties of gold nanotube membranes is the subject of this Review. Experiments showing that voltage charging can be used to reversibly switch the membrane between ideally cation- and anion-transporting states are reviewed. Voltage charging can also be used to enhance the ionic conductivity of gold nanotube membranes. Finally, voltage charging to accomplish electroporation of living bacteria as they pass through gold nanotube membranes is reviewed.

Bioinspired smart asymmetric nanochannel membranes

Bioinspired smart asymmetric nanochannel membranes (BSANM) have been explored extensively to achieve the delicate ionic transport functions comparable to those of living organisms. The abiotic system exhibits superior stability and robustness, allowing for promising applications in many fields. In view of the abundance of research concerning BSANM in the past decade, herein, we present a systematic overview of the development of the state-of-the-art BSANM system. The discussion is focused on the construction methodologies based on raw materials with diverse dimensions (i.e. 0D, 1D, 2D, and bulk). A generic strategy for the design and construction of the BSANM system is proposed first and put into context with recent developments from homogeneous to heterogeneous nanochannel membranes. Then, the basic properties of the BSANM are introduced including selectivity, gating, and rectification, which are associated with the particular chemical and physical structures. Moreover, we summarized the practical applications of BSANM in energy conversion, biochemical sensing and other areas. In the end, some personal opinions on the future development of the BSANM are briefly illustrated. This review covers most of the related literature reported since 2010 and is intended to build up a broad and deep knowledge base that can provide a solid information source for the scientific community.

From Ion Current to Electroosmotic Flow Rectification in Asymmetric Nanopore Membranes

Asymmetrically shaped nanopores have been shown to rectify the ionic current flowing through pores in a fashion similar to a p-n junction in a solid-state diode. Such asymmetric nanopores include conical pores in polymeric membranes and pyramidal pores in mica membranes. We review here both theoretical and experimental aspects of this ion current rectification phenomenon. A simple intuitive model for rectification, stemming from previously published more quantitative models, is discussed. We also review experimental results on controlling the extent and sign of rectification. It was shown that ion current rectification produces a related rectification of electroosmotic flow (EOF) through asymmetric pore membranes. We review results that show how to measure and modulate this EOF rectification phenomenon. Finally, EOF rectification led to the development of an electroosmotic pump that works under alternating current (AC), as opposed to the currently available direct current EOF pumps. Experimental results on AC EOF rectification are reviewed, and advantages of using AC to drive EOF are discussed.

Low-Voltage Flow-Through Electroporation in Gold-Microtube Membranes

Electroporation is used to create pores within the membrane of living cells in order to deliver a substance, for example, a gene, into the cytoplasm. To achieve the high electric field gradients required to porate the membrane, current electroporation devices deliver voltage pulses in the kV range to the cell medium. We describe a new device based on gold-microtube membranes that can accomplish electroporation with voltage pulses that are orders of magnitude smaller, ≤5 V. This is possible because the voltage pulses are applied to the gold microtubes resulting in large electric field gradients down the length of the tubes. We used COMSOL simulations to calculate the electric field gradients, and these theoretical results were compared with known experimental values required to electroporate Escherichia coli. We developed two fluorescence-based methods to demonstrate successful electroporation of E. coli. The percentages of electroporated bacteria were found to be more than an order of magnitude higher than obtained with a commercial electroporator, although the voltage employed was 500 times lower. Furthermore, this microtube membrane device is flow through and is therefore capable of continuous, as opposed to batch-wise, electroporation and cell analysis. Cell throughput of >30 million cells per min, higher than any previously reported device, were obtained.

Theory of electrostatic phenomena in water-filled Pt nanopores

The emerging field of nanoprotonics is concerned with controlling proton distribution and transport in nanoporous media. These phenomena, dictated by the surface charging properties of the host medium, are of vital importance in porous electrodes for fuel cells, electrolysers, supercapacitors and nanofluidic devices. In this theoretical study, we explore the interplay of the metal charging relation with the proton density and oxygen reduction activity in a water-filled nanopore with walls made of platinum. We exploit a non-monotonic charging behavior derived from a refined structural model of the Pt-solution interface. This charging relation replaces the oversimplified linear relation that has been widely used in practical applications. The water-filled pore, with one opening interfacing with a polymer electrolyte membrane as a proton source, always possesses negative surface charge in the potential range of 0-1.0 V (RHE). Therefore, its proton conductivity can be several orders higher than that of pure water. We obtain an analytical expression for the oxygen reduction activity of the nanopore and parameterize it using the polarization data of an ionomer-free thin-film Pt electrode. The structure vs. performance relation of the water-filled Pt nanopore is examined.

Silicon Nitride Thin Films for Nanofluidic Device Fabrication

Silicon nitride is a ubiquitous and well-established nanofabrication material with a host of favourable properties for creating nanofluidic devices with a range of compelling designs that offer extraordinary discovery potential. Nanochannels formed between two thin silicon nitride windows can open up vistas for exploration by freeing transmission electron microscopy to interrogate static structures and structural dynamics in liquid-based samples. Nanopores present a strikingly different architecture—nanofluidic channels through a silicon nitride membrane—and are one of the most promising tools to emerge in biophysics and bioanalysis, offering outstanding capabilities for single molecule sensing. The constrained environments in such nanofluidic devices make surface chemistry a vital design and performance consideration. Silicon nitride has a rich and complex surface chemistry that, while too often formidable, can be tamed with new, robust surface functionalization approaches. We will explore how a simple structural element—a ∼100 nm-thick silicon nitride window—can be used to fabricate devices to wrest unprecedented insights from the nanoscale world. We will detail the intricacies of native silicon nitride surface chemistry, present surface chemical modification routes that leverage the richness of available surface moieties, and examine the effect of engineered chemical surface functionality on nanofluidic device character and performance.

Template Synthesis of Nanostructured Polymeric Membranes by Inkjet Printing

The fabrication of functional nanomaterials with complex structures has been serving great scientific and practical interests, but current fabrication and patterning methods are generally costly and laborious. Here, we introduce a versatile, reliable, and rapid method for fabricating nanostructured polymeric materials. The novel method is based on a combination of inkjet printing and template synthesis, and its utility and advantages in the fabrication of polymeric nanomaterials is demonstrated through three examples: the generation of polymeric nanotubes, nanowires, and thin films. Layer-by-layer-assembled nanotubes can be synthesized in a polycarbonate track-etched (PCTE) membrane by printing poly(allylamine hydrochloride) and poly(styrenesulfonate) sequentially. This sequential deposition of polyelectrolyte ink enables control over the surface charge within the nanotubes. By a simple change of the printing conditions, polymeric nanotubes or nanowires were prepared by printing poly(vinyl alcohol) in a PCTE template. In this case, the high-throughput nature of the method enables functional nanomaterials to be generated in under 3 min. Furthermore, we demonstrate that inkjet printing paired with template synthesis can be used to generate patterns comprised of chemically distinct nanomaterials. Thin polymeric films of layer-by-layer-assembled poly(allylamine hydrochloride) and poly(styrenesulfonate) are printed on a PCTE membrane. Track-etched membranes covered with the deposited thin films reject ions and can potentially be utilized as nanofiltration membranes. When the fabrication of these different classes of nanostructured materials is demonstrated, the advantages of pairing template synthesis with inkjet printing, which include fast and reliable deposition, judicious use of the deposited materials, and the ability to design chemically patterned surfaces, are highlighted.

Salt Pumping by Voltage-Gated Nanochannels

This Letter investigates voltage-gated nanochannels, where both the potential applied to the conductive membrane containing the channel (membrane potential) and the potential difference between the solutions at both sides of the membrane (transmembrane potential) are independently controlled. The predicted conductance characteristics of these fixed-potential channels dramatically differ from those of the widely studied fixed-charge nanochannels, in which the membrane is insulating and has a fixed surface charge density. The difference arises because the transmembrane potential induces an inhomogeneous charge distribution on the surface of fixed-potential nanochannels. This behavior, related to bipolar electrochemistry, has some interesting and unexpected consequences for ion transport. For example, continuously oscillating the transmembrane potential, while holding the membrane potential at the potential for which it has zero charge in equilibrium, creates fluxes of neutral salt (fluxes of anions and cations in the same direction and number) through the channel, which is an interesting phenomenon for desalination applications.