Photothermal-Responsive Single-Walled Carbon Nanotube-Based Ultrathin Membranes for On/Off Switchable Separation of Oil-in-Water Nanoemulsions

Bioinspired superwetting oil-water separation strategy: toward the era of openness

Bioinspired superwetting oil-water separation strategies have received significant attention for their potential in addressing global water scarcity and aquatic pollution challenges. Over the past two decades, the field has rapidly developed, reaching a pivotal phase of innovation in the oil-water separation process. However, many groundbreaking studies have not received extensive scientific recognition. In this review, we systematically examine the application of bioinspired superwetting materials for complex multiscale oil-water separation. We discuss the development of 2D membrane filtration and 3D sponge adsorption materials in confined spaces, summarizing the core separation mechanisms, key research findings, and the evolutionary logic of these materials. Additionally, we highlight emerging open-space separation strategies, emphasizing several novel dynamic separation devices of significant importance. We evaluate and compare the design concepts, separation principles, materials used, comprehensive performance, and existing challenges of these diverse strategies. Finally, we summarize these advantages, critical bottlenecks, and prospects of this field and propose potential solutions for real oil-water separation processes from a general perspective.

High-Performance Membranes Based on Spherical-Beaded Nanofibers and Nanoarchitectured Networks for Water-in-Oil Emulsion Separation

High-performance separation materials for oil-water emulsions are crucial to environmental protection and resource recovery; however, most existing fibrous separation materials are subject to large pore size and low porosity, resulting in limited separation performance. Herein, we create high-performance membranes consisting of spherical-beaded nanofibers and nanoarchitectured networks (nano-nets) using electrostatic spinning/netting technology, for water-in-oil emulsion separation. By manipulating the nonequilibrium stretching of jets, spherical-beaded nanofibers capable of generating a robust microelectric field are fabricated as scaffolds, on which charged droplets are induced to eject and phase separate to self-assemble nano-nets with small pores. Benefiting from 3D undulating networks with cavities originating from 2D nano-nets supported by 1D spherical-beaded nanofibers, the membranes exhibit under-oil superhydrophobicity (>152°), a striking separation performance with an efficiency of >99.2% and a flux of 5775 L m-2 h-1, together with wide pressure applicability, antifouling, and reusability. This work may open up new horizons in developing fibrous materials for separation and purification.

Self-standing membranes for separation: Achievements and opportunities

Supported membranes and mixed matrix membranes have a limitation of harming the mass transfer due to the incompatibility between the support layer or the matrix and the active components of the membrane. Self-standing membranes, which could structurally abandon the support layer, altogether avoid the adverse effect, thus greatly facilitating the transmembrane mass transfer process. However, the abandonment of the support layer also reduces the membrane's mechanical properties and formability. In this review, our emphasis will be on self-standing membranes within the realm of materials and separation engineering. We will explore the materials employed in the fabrication of self-standing membranes, highlighting their ability to simultaneously enhance membrane performance and promote self-standing characteristics. Additionally, we will delve into the diverse techniques utilized for crafting self-standing membranes, encompassing interfacial polymerization, filtration, solvent casting, Langmuir-Blodgett & layer-by-layer assembly, electrospinning, compression, etc. Throughout the discussion, the merits and drawbacks associated with each of these preparation methods were elucidated. We also provide a brief overview of the applications of self-standing membranes, including water purification, gas separation, organic solvent nanofiltration, electrochemistry, and membrane reactor, as well as a brief description of the general strategies for performance enhancement of self-standing membranes. Finally, the current status of self-standing membranes and the challenges they may encounter were discussed.

Scalable weaving of resilient membranes with on-demand superwettability for high-performance nanoemulsion separations

This study leverages the ancient craft of weaving to prepare membranes that can effectively treat oil/water mixtures, specifically challenging nanoemulsions. Drawing inspiration from the core-shell architecture of spider silk, we have engineered fibers, the fundamental building blocks for weaving membranes, that feature a mechanically robust core for tight weaving, coupled with a CO2-responsive shell that allows for on-demand wettability adjustments. Tightly weaving these fibers produces membranes with ideal pores, achieving over 99.6% separation efficiency for nanoemulsions with droplets as small as 20 nm. They offer high flux rates, on-demand self-cleaning, and can switch between sieving oil and water nanodroplets through simple CO2/N2 stimulation. Moreover, weaving can produce sufficiently large membranes (4800 cm2) to assemble a module that exhibits long-term stability and performance, surpassing state-of-the-art technologies for nanoemulsion separations, thus making industrial application a practical reality.

Recent advances in membrane technologies applied in oil-water separation

Effective treatment of oily wastewater, which is toxic and harmful and causes serious environmental pollution and health risks, has become an important research field. Membrane separation technology has emerged as a key area of investigation in oil-water separation research due to its high separation efficiency, low costs, and user-friendly operation. This review aims to report on the advances in the research of various types of separation membranes around emulsion permeance, separation efficiency, antifouling efficiency, and stimulus responsiveness. Meanwhile, the challenges encountered in oil-water separation membranes are examined, and potential research avenues are identified.

Porous lignin-based composites for oil/water separation: A review

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Improvement strategies for oil/water separation based on electrospun SiO2 nanofibers

Oil spills and oily effluents from industry and daily life pose a great threat to all organisms in the ecosystem, while aggravating the problem of water scarcity, which has developed into a global challenge. Therefore, the development of advanced materials and technologies for oil/water separation has become a focus of attention. One-dimensional (1D) SiO2 nanofibers (SNFs) have become one of the most widely used inorganic nanomaterials in the past due to their stable chemical properties, excellent biocompatibility, and high temperature resistance etc. Meanwhile, electrospinning technique, as an emerging technology for treating oil/water emulsions, electrospun SNFs on this basis also has a number of advantages such as adjustable wettability, diverse structure and good connectivity. This review provides a systematic overview of the research progress of electrospun SNFs in different aspects. In this review, we first introduce the basic principles of electrospun SNFs, then focus on the design structures of various SNFs, propose corresponding strategies for the property improvement of SNFs, also analyze and consider the applications of SNFs. Finally, the challenges faced by electrospun SNFs in the field of oil/water separation are analyzed, and the future directions of electrospun SNFs are summarized and prospected.

A comprehensive review on state-of-the-art antifouling super(wetting and anti-wetting) membranes for oily wastewater treatment

One of the most dangerous types of pollution to the environment is oily wastewater, which is produced from a number of industrial sources and can cause damage to the environment, people, and creatures. To overcome this issue, membrane technology as an advanced method has been considered for treating oily wastewater due to its stability, high removal efficiency, and simplicity in scaling up. Membrane fouling, or the accumulation of oil droplets at or within the membrane pores, compromises the efficiency of membrane separation and water flux. In the last decade, the fabrication of membranes with specific wettability to reduce fouling has received much consideration. The purpose of this article is to offer a literature overview of all fabricated anti-fouling super(wetting and anti-wetting) membranes for applicable membrane processes for the separation of immiscible and emulsified oil/water mixtures. In this review, we first explain membrane fouling and discuss methods for preventing it. Afterwards, in all membrane separation processes, including pressure-driven, gravity-driven, and thermal-driven, membranes based on the form and density of oil are categorized as oil-removing or water-removing with special wettability, and then their wettability modification with different materials is particularly discussed. Finally, the prospect of anti-fouling membrane fabrication in the future is presented.

Non-Stop Switching Separation of Superfine Solid/Liquid Dispersed Phases in Oil and Water Systems Using Polymer-Assisted Framework Fiber Membranes

Fabricating filtration membranes with wide applicability and high efficiency is always a challenge in the precise separation of small colloidal particles under mild conditions. For this purpose, a strategy mixing supramolecular framework fiber with polymer is adopted. The fibrous assembly in the gel state provides uniform nanopores for both channel and interception and controlled wettability for lyophilic/lyophobic switching. The used polymer fills the gaps between fiber assemblies and improves the mechanical property. The composite membrane shows both under-oil superhydrophobic and underwater superoleophobic nature, which allows the conversions via in situ modulation of joystick solvents. Based on surface wetting and size-sieving, ultrafine hard nanoparticles dispersing in both hydrophobic organic solvents and water are selectively sieved. In addition, on-demand separation of water-in-oil and oil-in-water microemulsions without and with surfactants as systems containing soft droplets are realized. The smallest cut-off size of ≈3 nm is achieved for both hard and soft emulsions, while separation efficiency maintains during sustained in situ reversible switches.

Scalable and switchable CO2-responsive membranes with high wettability for separation of various oil/water systems

Smart membranes with responsive wettability show promise for controllably separating oil/water mixtures, including immiscible oil-water mixtures and surfactant-stabilized oil/water emulsions. However, the membranes are challenged by unsatisfactory external stimuli, inadequate wettability responsiveness, difficulty in scalability and poor self-cleaning performance. Here, we develop a capillary force-driven confinement self-assembling strategy to construct a scalable and stable CO2-responsive membrane for the smart separation of various oil/water systems. In this process, the CO2-responsive copolymer can homogeneously adhere to the membrane surface by manipulating the capillary force, generating a membrane with a large area up to 3600 cm2 and excellent switching wettability between high hydrophobicity/underwater superoleophilicity and superhydrophilicity/underwater superoleophobicity under CO2/N2 stimulation. The membrane can be applied to various oil/water systems, including immiscible mixtures, surfactant-stabilized emulsions, multiphase emulsions and pollutant-containing emulsions, demonstrating high separation efficiency (>99.9%), recyclability, and self-cleaning performance. Due to robust separation properties coupled with the excellent scalability, the membrane shows great implications for smart liquid separation.

Special Superwetting Materials from Bioinspired to Intelligent Surface for On-Demand Oil/Water Separation: A Comprehensive Review

Since superwetting surfaces have emerged, on-demand oil/water separation materials serve as a new direction for meeting practical needs. This new separation mode uses a single porous material to allow oil-removing and water-removing to be achieved alternately. In this review, the fundamentals of wettability are systematically summarized in oil/water separation. Most importantly, the two states, bioinspired surface and intelligent surface, are summarized for on-demand oil/water separation. Specifically, bioinspired surfaces include micro/nanostructures, bioinspired chemistry, Janus-featured surfaces, and dual-superlyophobic surfaces that these superwetting materials can possess asymmetric wettability in one structure system or opposite underliquid wettability by prewetting. Furthermore, an intelligent surface can be adopted by various triggers such as pH, thermal and photo stimuli, etc., to control wettability for switchable oil/water separation reversibly, expressing a thought beyond nature to realize innovative oil/water separation by external stimuli. Remarkably, this review also discusses the advantages of all the materials mentioned above, expanding the separation scope from the on-demand oil/water mixtures to the multiphase immiscible liquid-liquid mixtures. Finally, the prospects of on-demand oil/water separation materials are also concluded.

Membranes for Oil/Water Separation: A Review

Recent advancements in separation and membrane technologies have shown a great potential in removing oil from wastewaters effectively. In addition, the capabilities have improved to fabricate membranes with tunable properties in terms of their wettability, permeability, antifouling, and mechanical properties that govern the treatment of oily wastewaters. Herein, authors have critically reviewed the literature on membrane technology for oil/water separation with a specific focus on: 1) membrane properties and characterization, 2) development of various materials (e.g., organic, inorganic, and hybrid membranes, and innovative materials), 3) membranes design (e.g., mixed matrix nanocomposite and multilayers), and 4) membrane fabrication techniques and surface modification techniques. The current challenges and future research directions in materials and fabrication techniques for membrane technology applications in oil/water separation are also highlighted. Thus, this review provides helpful guidance toward finding more effective, practical, and scalable solutions to tackle environmental pollution by oils.

Measurement of the Photothermal Conversion Efficiency of CNT Films Utilizing a Raman Spectrum

Because carbon nanotube (CNT) films have high photothermal conversion efficiency (PTCE), they have been widely used in bolometric and photothermoelectric photodetectors, seawater desalination, and cancer therapy. Here, we present a simple, quick, and non-destructive method to measure the PTCE of CNT films. According to the linear relationship between the Raman shift of the G⁺ peak and the temperature of a CNT, the offset of the G⁺ peak under varying excitation light power can characterize the changed temperature. Combining the simulation of the temperature distribution, the final value of the PTCE can be obtained. Finally, a CNT film with a high PTCE was chosen to be fabricated as a bolometric photodetector; a quite high responsivity (2 A W⁻¹ at 532 nm) of this device demonstrated the effectiveness of our method.

Ultrafast Response and Programmable Locomotion of Liquid/Vapor/Light-Driven Soft Multifunctional Actuators

External-stimuli-driven soft actuators overcome several limitations inherent in traditional mechanical-driven technology considering the coming age of flexible robots, which might face harsh working conditions and rigorous multifunctional requirements. However, how to achieve multi-external-stimuli response, fast speed, and precise control of the position and angle of the actuator, especially working in a toxic liquid or vapor environment, still requires long-term efforts. Here, we report a multi-external-stimuli-driven sandwich actuator with aligned carbon nanotubes as the constructive subject, which can respond to various types of liquids (organic solvents), vapor, and solar light. The actuator has an ultrafast response speed (<10 ms) and can accurately adjust the bending angle range from 0° to 180°. Through manipulating the stimuli positions, actuators can be wound into varied turns when simulating a flexible robotic arm. Hence, liquid/vapor/light-driven actuators are able to support diverse programmable motions, such as periodic blooming, gesture variations, caterpillar crawling, toxic surface evading, and bionic phototaxis. We believe that this multifunctional actuator is promising in supporting a complex scenario to complete a variety of tasks in the fields of healthcare, bioengineering, chip technology, and mobile sensors.

Research Progress of Graphene and Its Derivatives towards Exhaled Breath Analysis

The metabolic process of the human body produces a large number of gaseous biomarkers. The tracking and monitoring of certain diseases can be achieved through the detection of these markers. Due to the superior specific surface area, large functional groups, good optical transparency, conductivity and interlayer spacing, graphene, and its derivatives are widely used in gas sensing. Herein, the development of graphene and its derivatives in gas-phase biomarker detection was reviewed in terms of the detection principle and the latest detection methods and applications in several common gases, etc. Finally, we summarized the commonly used materials, preparation methods, response mechanisms for NO, NH₃, H₂S, and volatile organic gas VOCs, and other gas detection, and proposed the challenges and prospective applications in this field.

Robust zirconia ceramic membrane with exceptional performance for purifying nano-emulsion oily wastewater

While membrane-based oil-water separation has been widely explored, using conventional membranes to treat oily wastewaters remains practically challenging especially when such wastewaters contain more stable nano-sized oil droplets and are of high oil content, and harsh chemical conditions. Herein, we report a novel protocol of efficiently separating both synthetic and real oil nano-emulsions via specially designed robust zirconia membranes. The best-performing zirconia membrane, fabricated at low sintering temperature, has relatively uniform sub-100 nm pores and is underwater superoleophobic. Such zirconia membranes possess not only outstanding separation performance under long-term operation but robust structural stability at harsh conditions. At different cross-flow velocities, a combined model of intermediate pore blocking and cake filtration dominated membrane fouling behavior. Specifically, at high pH value (especially > pH_(IEP)), membrane fouling was effectively mitigated due to a dominant role of electrostatic repulsion interaction at membrane-oil interface. Compared with conventional and commercial ceramic membranes, our zirconia membrane is the first reported in literature that can effectively reject nano-sized oil droplets (∼18 nm) with over 99% rejection. Moreover, the zirconia membrane has also been challenged with real degreasing wastewater with very high oil content (∼4284 mg L^-1) and pH (∼12.4) and delivered consistently high separation performance over many operation cycles.

Switchable wettability of grain-stacked filter layers from polyurethane plastic waste for oil/water separation

HYPOTHESIS

Polyurethane plastic waste (PUPW), a port-abundant solid waste, is difficult to degrade naturally and poses a severe threat to the environment. Hence, the effective recycling of PUPW remains a challenge.

EXPERIMENTS

Herein, a strategy of converting PUPW into stacked oil/water filtration layer grain through a layer-by-layer (LBL) assembly process is investigated. Notably, such PU-based, grain-stacked, and switchable wettability of the oil/water filter layer is first reported.

FINDINGS

The grain-stacked filter layers are flexible for separating immiscible oil/water mixtures, water-in-oil emulsions (WOE), and oil-in-water emulsions (OWE) under gravity over 10 cycle-usages. They can withstand strong acid/alkali solutions (pH = 1-14) and salt solutions over 12 h. Besides, 100-times scale-up experiments have indicated that the obtained filter layers exhibit an upper to 98.2 % separation efficiency for 10 L real industrial oil/water emulsion in the 24 h continuous operation. The demulsification mechanism for emulsions is that the electrostatic interaction along with adsorption between emulsion droplets and grains leads to the uneven distribution of surfactants on the interface film of the emulsion droplets, increasing the probability of tiny droplets colliding and coalescing into large droplets to achieve oil/water separation. This work proposes an effective and economical method of abundant plastic waste for industrial-scale oil-water separation rather than just on the laboratory-scale.

Superhydrophilic and Photothermal Fe-TCPP Nanofibrous Membrane for Efficient Oil-in-Water Nanoemulsion Separation

Separation and purification of surfactant-stabilized oil-in-water nanoemulsions is a great environmental challenge. Membrane-based separation strategies are more effective over conventional methods in the treatment of nanoemulsion waste water. In this paper, we construct a superhydrophilic membrane by coating a thin photothermal-responsive iron tetrakis(4-carboxyphenyl)porphyrin (Fe-TCPP) nanofibrous metal organic framework (MOF) selective layer on a macroporous polyethersulfone membrane. The as-prepared membrane exhibits high separation performance of oil-in-water nanoemulsions with permeance of 46.4 L·m^-2·h^-1·bar^-1 and separation efficiency of 99%. It also demonstrates nice anti-oil/ionic-fouling property, good recyclability, and desirable stability. The high separation performance is accredited to the superhydrophilicity, highly charged surface, and nanometer pore sizes of the Fe-TCPP nanofibrous membrane. Due to the unique photothermal property of Fe-TCPP nanofibers, the permeance can be enhanced more than 50% by visible light without deteriorating the rejection. This photo-stimuli MOF-based thin-layer membrane offers great potential for the generation of point-of-use water treatment devices.

Recent Progress in Superhydrophilic Carbon-Based Composite Membranes for Oil/Water Emulsion Separation

The purification of stabilized oil/water emulsions is essential to meet the ever increasing demand for monitoring water in the environment, which has been addressed with superwetting carbon-based separation membranes. These include superhydrophilic carbon-based membranes whose progress in recent years and perspectives are reviewed in this paper. The membrane construction strategy is organized into four parts, vacuum-assisted self-assembly, sol-gel process, electrospinning, and vacuum-assisted filtration. In each section, the design strategies and their responding disadvantages have been comprehensively discussed. The challenges and prospects concerning the superhydrophilic carbon-based separation membranes for oily wastewater purification are also summarized to arouse researchers to carry out more studies.

Light-responsive and corrosion-resistant gas valve with non-thermal effective liquid-gating positional flow control

Safe and precise control of gas flow is one of the key factors to many physical and chemical processes, such as degassing, natural gas transportation, and gas sensor. In practical application, it is essential for the gas-involved physicochemical process to keep everything under control and safe, which significantly relies on the controllability, safety, and stability of their valves. Here we show a light-responsive and corrosion-resistant gas valve with non-thermal effective liquid-gating positional flow control under a constant pressure by incorporating dynamic gating liquid with light responsiveness of solid porous substrate. Our experimental and theoretical analysis reveal that the photoisomerization of azobenzene-based molecular photoswitches on the porous substrate enabled the gas valve to possess a light-responsive and reversible variation of substantial critical pressure of non-thermal effective gas flow switch. Moreover, the chemically inert gating liquid prevented the solid substrate from corrosion and, by combining with the high spatiotemporal resolution of light, the gas valve realizes a precisely positional open and close under a steady-state pressure. The application demonstrations in our results show the potentials of the new gas valve for bringing opportunities to many applications, such as gas-involved reaction control in microfluidics, soft actuators, and beyond.

Advanced Materials with Special Wettability toward Intelligent Oily Wastewater Remediation

Clean water resources are essential to our human society. Oil leakage has caused water contamination, which leads to serious shortage of clean water, environmental deterioration, and even increasing number of deaths. It is of great urgency to solve the oil-polluted water problems worldwide. Efficient oil/water separation, especially emulsified oil/water mixture separation, is widely used to mitigate water pollution issues. Recently, advanced materials with special wettability have been employed for oily wastewater remediation. Moreover, by endowing them with various intelligent functions, smart materials can effectively separate complex oil/water mixtures including extremely stable emulsions. In this review, oil/water separation mechanisms and various fabrication methods of special wettability separation materials are summarized. We highlight the special wettable materials with intelligent functions, including photocatalytic, self-healing, and switchable oil/water separation materials, which can achieve self-cleaning, self-healing, and efficient oily wastewater treatment. In each section, the acting mechanisms, fabricating technologies, representative studies, and separation efficiency are briefly introduced. Lastly, the challenges and outlook for oil/water separation based on the special wettability materials are discussed.

Fundamentals and applications of photo-thermal catalysis

Photo-thermal catalysis has recently emerged as an alternative route to drive chemical reactions using light as an energy source.

Robust Bifunctional Compressed Carbon Foam for Highly Effective Oil/Water Emulsion Separation

In this study, we report the pure compressed carbon foam (CCF) that offers a brand-new solution for separating emulsified oil/water mixtures. The CCF was fabricated by low-temperature carbonization of three-dimensional commercial melamine foam, which was then compressed without any further chemical modification. The CCF has amphiphilicity in air, underwater superoleophobicity, and underoil superhydrophobicity; therefore, it has been proved to be successfully utilized in highly emulsified oil-in-water and water-in-oil emulsions with excellent separation efficiencies, and it merely relies on gravity in the absence of external force. The CCF can also maintain its superwetting property under different harsh conditions, including strong acid, alkali, and salt solution conditions; this property offers great opportunities for widespread applications. Importantly, the CCF exhibits excellent permeability, separation efficiency, antifouling, and reusability performance. This novel CCF material has great potential application in handling oily wastewater owing to its low-cost raw materials, easily scaled-up preparation process, excellent antifouling property, and high separation capacity of materials.

Polydopamine-Incorporated Nanoformulations for Biomedical Applications

Polydopamine (PDA), a pigment in natural melanin, has attracted considerable attention because of its excellent optical properties, extraordinary adhesion, and good biocompatibility, which make it a promising material for application in energy, environmental, and biomedical fields. In this review, PDA-incorporated nanoformulations are focused for biomedical applications such as drug delivery, bioimaging, and tumor therapy. First, the recent advances in PDA-incorporated nanoformulations for drug delivery are discussed. Further, their application in boimaging, such as fluorescence imaging, photothermal imaging, and photoacoustic imaging, is reviewed. Next, their therapeutic applications, including chemotherapy, photodynamic therapy, photothermal therapy, and synergistic therapy are discussed. Finally, other biomedical applications of PDA-incorporated nanoformulations such as biosensing and clinical diagnosis are briefly presented. Finally, the biomedical applications of PDA-incorporated nanoformulations along with their prospects are summarized.

Dimensional Nanofillers in Mixed Matrix Membranes for Pervaporation Separations: A Review

Pervaporation (PV) has been an intriguing membrane technology for separating liquid mixtures since its commercialization in the 1980s. The design of highly permselective materials used in this respect has made significant improvements in separation properties, such as selectivity, permeability, and long-term stability. Mixed-matrix membranes (MMMs), featuring inorganic fillers dispersed in a polymer matrix to form an organic-inorganic hybrid, have opened up a new avenue to facilely obtain high-performance PV membranes. The combination of inorganic fillers in a polymer matrix endows high flexibility in designing the required separation properties of the membranes, in which various fillers provide specific functions correlated to the separation process. This review discusses recent advances in the use of nanofillers in PV MMMs categorized by dimensions including zero-, one-, two- and three-dimensional nanomaterials. Furthermore, the impact of the nanofillers on the polymer matrix is described to provide in-depth understanding of the structure-performance relationship. Finally, the applications of nanofillers in MMMs for PV separation are summarized.

Biomimetic and Superelastic Silica Nanofibrous Aerogels with Rechargeable Bactericidal Function for Antifouling Water Disinfection

Disinfecting drinking water in a reliable, sustainable, and affordable manner is a great challenge, especially for water contaminated with pathogenic microbes, and traditional water disinfection strategies still suffer from biofouling, irreversible depletion of disinfectants, and energy consumption. In this study, we developed biomimetic and superelastic skeletal-structured silica nanofibrous aerogels (SNAs) with rechargeable bactericidal and antifouling property via the combination of electrospun silica nanofibers and a functional Si-O-Si bonding network. The premise for our design is that the Si-O-Si network comprising rechargeable N-halamine moieties can provide the aerogels with structural stability yet durable bactericidal activity. The resulting aerogels exhibit intriguing properties of high porosity, superhydrophilicity, superelasticity, rechargeable chlorination capability (>4800 ppm), and exceptional bactericidal activity (99.9999%), enabling the aerogels to effectively disinfect the bacteria-contaminated water with ultrahigh flux (57 600 L m^-2 h^-1) and antifouling function. The synthesis of the SNAs opens pathways for exploring antibacterial and antifouling materials in a renewable and nanofibrous form.

Hierarchical structurized waste brick with opposite wettability for on-demand oil/water separation

Due to the variety of oily wastewater and complexity of separation system, it has put forward new challenge and requirement to separation materials for on-demand separation of various oil/water mixtures. Here, we reported a facile waste-to-resource strategy to rationally fabricate hierarchical ZnO nanopillars coating onto the surface of waste brick grains (ZnO/WBG) via simple physical process and in-situ growth technique. Specifically, the directly as-prepared ZnO/WBG possess superhydrophilic/underwater superoleophobic (UWSOB) properties and modified ZnO/WBG by organosilicon reagent possess quasi superhydrophobic/superoleophilic (SHOBI) properties. It is also worth noting that this discrete ZnO/WBG with opposite wettability can be accumulated into ZnO/WBG layer with numerous tortuous channel structure, making it feasible for on-demand separating various oil/water mixtures whether immiscible light- and heavy-oil/water mixtures or oil-in-water and water-in-oil emulsions. It has been demonstrated that the filter layers with opposite wettability exhibit high separation efficiency and flux, excellent chemical stability and admirable recyclability. Thus, this novel and cost-effective ZnO/WBG layer holds great promise for large-scale and versatile oil/water separation. Additionally, this work presents a sustainable perspective of effectively utilizing waste brick to construct workable functionalized materials with tremendous application potential, showing far-reaching value and significance in fundamental research and environmental protection.

Versatile Nanoplatforms with enhanced Photodynamic Therapy: Designs and Applications

As an emerging antitumor strategy, photodynamic therapy (PDT) has attracted intensive attention for the treatment of various malignant tumors owing to its noninvasive nature and high spatial selectivity in recent years. However, the therapeutic effect is unsatisfactory on some occasions due to the presence of some unfavorable factors including nonspecific accumulation of PS towards malignant tissues, the lack of endogenous oxygen in tumors, as well as the limited light penetration depth, further hampering practical application. To circumvent these limitations and improve real utilization efficiency, various enhanced strategies have been developed and explored during the past years. In this review, we give an overview of the state-of-the-art advances progress on versatile nanoplatforms for enhanced PDT considering the enhancement from targeting or responsive, chemical and physical effect. Specifically, these effects mainly include organelle-targeting function, tumor microenvironment responsive release photosensitizers (PS), self-sufficient O2 (affinity oxygen and generating oxygen), photocatalytic water splitting, X-rays light stimulate, surface plasmon resonance enhancement, and the improvement by resonance energy transfer. When utilizing these strategies to improve the therapeutic effect, the advantages and limitations are addressed. Finally, the challenges and prospective will be discussed and demonstrated for the future development of advanced PDT with enhanced efficacy.