Chain-end functionalized nanopatterned polymer brushes grown via in situ nitroxide free radical exchange

Surface-grafted polyacrylonitrile brushes with aggregation-induced emission properties

Polyacrylonitrile (PAN) brushes were grafted from silicon wafers by photoinduced ATRP and shown to exhibit aggregation-induced emission (AIE) properties.

Fluorescent Patterns by Selective Grafting of a Telechelic Polymer

The preparation of patterned ultrathin films (sub-10 nm) composed of end-anchored fluorescently labeled poly(methyl methacrylate) (PMMA) is presented. Telechelic PMMA was synthesized utilizing activator regenerated by electron transfer atom transfer radical polymerization and consecutively end-functionalized with alkynylated fluorescein by Cu-catalyzed azide-alkyne cycloaddition (CuAAC) "click" chemistry. The polymers were grafted via the α-carboxyl groups to silica or glass substrates pretreated with (3-aminopropyl)triethoxysilane (APTES). Patterned surfaces were prepared by inkjet printing of APTES onto glass substrates and selectively grafted with fluorescently end-labeled PMMA to obtain emissive arrays on the surface.

Ring-Expansion/Contraction Radical Crossover Reactions of Cyclic Alkoxyamines: A Mechanism for Ring Expansion-Controlled Radical Polymerization

Macrocyclic polymers present an important class of macromolecules, displaying the reduced radius of gyration or impossibility to entangle. A rare approach for their synthesis is the ring expansion-controlled radical "vinyl" polymerization, starting from a cyclic alkoxyamine. We here describe ring-expansion radical crossover reactions of cyclic alkoxyamines which run in parallel to chain-propagation reactions in the polymerization system. The radical crossover reactions extensively occurred at 105⁻125 °C, eventually producing high molecular weight polymers with multiple inherent dynamic covalent bonds (NOC bonds). A subsequent ring-contraction radical crossover reaction and the second ring-expansion radical crossover reaction are also described. The major products for the respective three stages were shown to possess cyclic morphologies by the molecular weight profiles and the residual ratios for the NOC bonds (φ in %). In particular, the high φ values ranging from ca. 80% to 98% were achieved for this cyclic alkoxyamine system. This result verifies the high availability of this system as a tool demonstrating the ring-expansion "vinyl" polymerization that allows them to produce macrocyclic polymers via a one-step vinyl polymerization.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Nanopatterned polymer brushes: conformation, fabrication and applications

Surfaces with end-grafted, nanopatterned polymer brushes that exhibit well-defined feature dimensions and controlled chemical and physical properties provide versatile platforms not only for investigation of nanoscale phenomena at biointerfaces, but also for the development of advanced devices relevant to biotechnology and electronics applications. In this review, we first give a brief introduction of scaling behavior of nanopatterned polymer brushes and then summarize recent progress in fabrication and application of nanopatterned polymer brushes. Specifically, we highlight applications of nanopatterned stimuli-responsive polymer brushes in the areas of biomedicine and biotechnology.

Selective patterning of gold surfaces by core/shell, semisoft hybrid nanoparticles

The generation of patterned surfaces with well-defined nano- and microdomains is demonstrated by attaching core/shell, semisoft nanoparticles with narrow size distribution to microdomains of a gold-coated silicon wafer. Near monodisperse nanoparticles are prepared using reversible addition-fragmentation chain transfer (RAFT) polymerization, initiated from a silica surface, to prepare a polystyrene shell around a silica core. The particles are then used as-prepared, or after aminolysis of the terminal thiocarbonyl group of the polystyrene shell, to give thiol-terminated nanoparticles. When gold-coated silicon wafers are immersed into very dilute suspensions of these particles (as low as 0.004 wt%), both types of particles are shown to adhere to the gold domains. The thiolated particles adhere selectively to the gold microdomains, allowing for microdomain patterning, while particles that contain the trithiocarbonate functionality lead to a much more even coverage of the gold surface with fewer particle aggregations.

Luminescence enhancement of pyrene/dispersant nanoarrays driven by the nanoscale spatial effect on mixing

This work presents a simple method to generate ordered chromophore/dispersant nanoarrays through a pore-filling process for a nanoporous polymer template to enhance chromophore luminescence. Fluorescence results combining with the morphological evolution examined by scanning probe microscopy reveal that the enhanced luminescence intensity reaches the maximum intensity as the nanopores of the template are completely filled by the chromophore/dispersant mixture. The variation is attributed to nanoscale spatial effect on the enhanced mixing efficiency of chromophore and dispersant, that is, the alleviation of self-quenching problem, as evidenced by the results of attenuated total reflection Fourier transform IR spectroscopy combining with grazing incident wide-angle X-ray diffraction. The enhanced luminescence of the chromophore/dispersant nanoarrays driven by the nanoscale spatial effect is highly promising for use in designing luminescent nanodevices.

Nitroxides: applications in synthesis and in polymer chemistry

This Review describes the application of nitroxides to synthesis and polymer chemistry. The synthesis and physical properties of nitroxides are discussed first. The largest section focuses on their application as stoichiometric and catalytic oxidants in organic synthesis. The oxidation of alcohols and carbanions, as well as oxidative C-C bond-forming reactions are presented along with other typical oxidative transformations. A section is also dedicated to the extensive use of nitroxides as trapping reagents for C-centered radicals in radical chemistry. Alkoxyamines derived from nitroxides are shown to be highly useful precursors of C-centered radicals in synthesis and also in polymer chemistry. The last section discusses the basics of nitroxide-mediated radical polymerization (NMP) and also highlights new developments in the synthesis of complex polymer architectures.

Ultrasmall structure fabrication via a facile size modification of nanoimprinted functional silsesquioxane features

We propose a simple and robust scheme for a precise and controlled fabrication of ultrasmall structures through the direct size modification (either reduction or increment) of functional nanoimprinted silsesquioxane (SSQ) patterns. The size modification of nanopatterned SSQ polymer features was achieved according to two different independent approaches. In the first approach, feature size was reduced by a simple heat-induced mass loss mechanism; in the second approach structure size increment was achieved by building multiple polymeric layers on top of imprinted patterns. The fabricated arrays follow the shape contour of the patterned structures so the original imprinted profile is preserved. The engineered capabilities were applied to produce high resolution stamps for nanoimprinting. These approaches free the need for sophisticated nanofabrication techniques and expensive facilities required for nanopatterning.

Programming nanostructures of polymer brushes by dip-pen nanodisplacement lithography (DNL)

We report a facile and versatile scanning probe based approach-dip-pen nanodisplacement lithography (DNL)--for manipulating nanostructures of polymer brushes. Nanostructured polymer brushes with sizes as small as 25 nm are made by DNL patterning of the initiator molecules and subsequent surface-initiated polymerization. Nanoconfinement effects including chain collapsing and spreading are observed in the nanopatterned polymer brushes. In addition to chemical structure, size, topography and shape, our approach can also readily program the grafting density, chain configuration, hierarchical structure and multiplexing of the polymer brushes, which allows for the realization of complex chemical surfaces.

Nanoimprint lithography for functional three-dimensional patterns

Nanoimprint lithography (NIL) is viewed as an alternative nanopatterning technique to traditional photolithography, allowing micrometer-scale and sub-hundred-nanometer resolution as well as three-dimensional structure fabrication. In this Research News article we highlight current activities towards the use of NIL in patterning active or functional materials, and the application of NIL in patterning materials that present both chemistry and structure/topography in the patterned structures, which provide scaffolds for subsequent manipulation. We discuss and give examples of the various materials and chemistries that have been used to create functional patterns and their implication in various fields as electronic and magnetic devices, optically relevant structures, biologically important surfaces, and 3D particles.

Direct patterning of intrinsically electron beam sensitive polymer brushes

The fabrication of patterned polymer brushes has attracted considerable attention as these structures can be exploited in devices on the nano- and microscale. Patterning of polymer brushes is typically a complex, multistep process. We report the direct patterning of poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(isobutyl methacrylate) (PIBMA), poly(neopentyl methacrylate) (PNPMA), and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) brushes in a single step by electron beam (e-beam) lithography, to obtain nanopatterned polymer brush surfaces. PMMA, PHEMA, PIBMA, PNPMA, and PTFEMA brushes were grown on silicon substrates via surface-initiated atom transfer radical polymerization. Surface analysis techniques including ellipsometry, contact angle goniometry, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the thickness, hydrophilicity, roughness, and chemical composition of the polymer brushes. Tapping-mode AFM imaging confirmed the successful electron beam patterning of these brushes. Using this direct patterning method, highly resolved nanostructured polymer brush patterns down to 50 nm lines were obtained. This direct patterning of brushes eliminates the need for complex lithographic schemes. The sensitivity of these polymer brushes toward direct patterning with e-beam was studied and compared. The sensitivity curves indicate that the structure of the e-beam degradable methacrylate polymer has a significant effect on the sensitivity of the polymer brush toward e-beam patterning. In particular, the effect of the chemical functionality at the beta-position to the carbonyl group on the polymer brush sensitivity toward direct patterning was studied using groups of varying size and polarity.

Development of a directly patterned low-surface-energy polymer brush in supercritical carbon dioxide

Carbon dioxide (CO2) is a sustainable solvent because it is nonflammable, exhibits a relatively low toxicity, and is naturally abundant. As a selective, nonpolar solvent, supercritical CO2 (scCO2) is an ideal fit for the development of low-surface-energy polymers. The development of directly patterned poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) brushes in scCO2 was investigated. PTFEMA, in particular, was selected over other fluorinated polymers because of its very high electron-beam (e-beam) sensitivity. PTFEMA brushes were grown on silicon substrates via controlled surface-initiated atom-transfer radical polymerization of TFEMA. Surface analysis techniques including ellipsometry, contact-angle goniometry, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy were used to characterize the thickness, hydrophilicity, roughness, and chemical composition of the polymer brushes. PTFEMA brushes were directly patterned in a single step using e-beam lithography and were processed in an environmentally benign scCO2 solvent. Tapping-mode AFM imaging confirmed the successful e-beam patterning and development of these brushes. The sensitivity of PTFEMA brushes toward direct patterning with the e-beam, followed by scCO2 development, was studied and compared to development in tetrahydrofuran solvent. Using this direct-patterning method, followed by dry development in scCO2, highly resolved nanostructured polymer brush lines down to 78 nm could be prepared. This method can be generalized to prepare fluorinated low-surface-energy polymer brush surfaces in a single step for various applications.

Fabrication of mixed self-assembled monolayers designed for avidin immobilization by irradiation promoted exchange reaction

An applicability of irradiation-promoted exchange reaction (IPER) to the fabrication of mixed self-assembled monolayers (SAMs) composed of the protein-repelling matrix and the moieties bearing binding sites for specific attachment of a target protein is demonstrated. As test systems, we took mixed films of oligoethylene glycol (OEG)-substituted alkanethiols (OEG-ATs) and biotin-substituted alkanethiols (BATs) on Au{111}. Such SAMs are suitable for the specific immobilization of avidin protein and its variants. The composition of the mixed OEG-AT/BAT SAMs could be precisely controlled by varying the irradiation dose, which is important prerequisite for the fabrication of the respective patterns by electron-beam lithography. While the general trend in the immobilization of avidin onto the mixed OEG-AT/BAT SAMs prepared by IPER was found to be consistent with the earlier reports regarding the analogous films fabricated by the coassembly method, the concentration of the BAT component in the mixed SAMs needed for the maximum surface coverage of the specific protein was found to be somewhat lower, and the maximum avidin coverage somewhat higher in the case of IPER as compared to the coassembly method. We ascribe these differences to the lack of phase segregation and better separation of the individual BAT species in the OEG-AT matrix in the case of IPER.

Polymer brushes on periodically nanopatterned surfaces

Structural properties of polymer brushes tethered on a periodically nanopatterned substrate are investigated by computer simulations. The substrate consists of an alternating succession of two different types of equal-width parallel stripes, and the polymers are end-tethered selectively on every second stripe. Three distinct morphologies of the nanopatterned brush have been identified, and their range of stability has been determined in terms of a single universal parameter that combines the grafting density, the polymer length, and the stripe width. We propose scaling relations for the average brush height and for the architectural properties of the outer surface of the nanopatterned brush under good solvent conditions. Our analysis provides guidelines for fabricating well-defined and tunable nanopatterned polymeric films.

Patterned layers of a semiconducting polymer via imprinting and microwave-assisted grafting

Enhancements in both the rate and extent of grafting of poly(9,9'-n-dihexyl fluorene) (PDHF) onto flat and nanopatterned crosslinked photopolymer films are described. Reactivity of the surfaces toward grafting via the Yamamoto-type Ni(0)-mediated coupling reaction is increased by synthesizing and incorporating 2,7-dibromo-9-fluorenyl methacrylate (DBFM, 2) as a new grafting agent. Varying the concentration of surface-embedded DBFM is shown to control both overall graft formation and fluorescence with a maximum thickness of up to 30 nm and peak emission at 407 nm for 40 wt% loading. In addition, microwave irradiation is introduced as an effective means to drive graft formation and thus allows fabrication of PDHF-functionalized surfaces in as little as 30 min. Both forms of improvement are extended to DBFM-embedded, nanocontact-molded features ranging in size from 100 microm to 100 nm in width and 60 nm in height. Microwave-assisted grafting from these patterned surfaces produces fluorescent features as imaged by optical microscopy and a corresponding increase in feature height as measured by atomic force microscopy.