Synthesis of diethynyltriptycene-linked dipyridyl ligands

Triptycene-based Bis(benzimidazole) Carboxylate-Bridged Biomimetic Diiron(II) Complexes

A triptycene-based bis(benzimidazole) ester ligand, L3, was designed to enhance the electron donating ability of the heterocyclic nitrogen atoms relative to those of the first generation bis(benzoxazole) analogs, L1 and L2. A convergent synthesis of L3 was designed and executed. Three-component titration experiments using UV-visible spectroscopy revealed that the desired diiron(II) complex could be obtained with a 1:2:1 ratio of L3:Fe(OTf)2(MeCN)2:external carboxylate reactants. X-ray crystallographic studies of two diiron complexes derived in this manner from L3 revealed their formulas to be [Fe2L3(μ-OH)(μ-O2CR)(OTf)2], where R = 2,6-bis(p-tolyl)benzoate (7) or triphenylacetate (8). The structures are similar to that of a diiron complex derived from L1, [Fe2L1(μ-OH)(μ-O2CArTol)(OTf)2] (9) with a notable difference being that, in 7 and 8, the geometry at iron more closely resembles square-pyramidal than trigonal-bipyramidal. Mössbauer spectroscopic analyses of 7 and 8 indicate the presence of high-spin diiron(II) cores. These results demonstrate the importance of substituting benzimidazole for benzoxazole for assembling biomimetic diiron complexes with syn disposition of two N-donor ligands, as found in O2-activating carboxylate-bridged diiron centers in biology.

Evolution of strategies to prepare synthetic mimics of carboxylate-bridged diiron protein active sites

We present a comprehensive review of research conducted in our laboratory in pursuit of the long-term goal of reproducing the structures and reactivity of carboxylate-bridged diiron centers used in biology to activate dioxygen for the conversion of hydrocarbons to alcohols and related products. This article describes the evolution of strategies devised to achieve these goals and illustrates the challenges in getting there. Particular emphasis is placed on controlling the geometry and coordination environment of the diiron core, preventing formation of polynuclear iron clusters, maintaining the structural integrity of model complexes during reactions with dioxygen, and tuning the ligand framework to stabilize desired oxygenated diiron species. Studies of the various model systems have improved our understanding of the electronic and physical characteristics of carboxylate-bridged diiron units and their reactivity toward molecular oxygen and organic moieties. The principles and lessons that have emerged from these investigations will guide future efforts to develop more sophisticated diiron protein model complexes.

Toward functional carboxylate-bridged diiron protein mimics: achieving structural stability and conformational flexibility using a macrocylic ligand framework

A dinucleating macrocycle, H(2)PIM, containing phenoxylimine metal-binding units has been prepared. Reaction of H(2)PIM with [Fe(2)(Mes)(4)] (Mes = 2,4,6-trimethylphenyl) and sterically hindered carboxylic acids, Ph(3)CCO(2)H or Ar(Tol)CO(2)H (2,6-bis(p-tolyl)benzoic acid), afforded complexes [Fe(2)(PIM)(Ph(3)CCO(2))(2)] (1) and [Fe(2)(PIM)(Ar(Tol)CO(2))(2)] (2), respectively. X-ray diffraction studies revealed that these diiron(II) complexes closely mimic the active site structures of the hydroxylase components of bacterial multicomponent monooxygenases (BMMs), particularly the syn disposition of the nitrogen donor atoms and the bridging μ-η(1)η(2) and μ-η(1)η(1) modes of the carboxylate ligands at the diiron(II) centers. Cyclic voltammograms of 1 and 2 displayed quasi-reversible redox couples at +16 and +108 mV vs ferrocene/ferrocenium, respectively. Treatment of 2 with silver perchlorate afforded a silver(I)/iron(III) heterodimetallic complex, [Fe(2)(μ-OH)(2)(ClO(4))(2)(PIM)(Ar(Tol)CO(2))Ag] (3), which was structurally and spectroscopically characterized. Complexes 1 and 2 both react rapidly with dioxygen. Oxygenation of 1 afforded a (μ-hydroxo)diiron(III) complex [Fe(2)(μ-OH)(PIM)(Ph(3)CCO(2))(3)] (4), a hexa(μ-hydroxo)tetrairon(III) complex [Fe(4)(μ-OH)(6)(PIM)(2)(Ph(3)CCO(2))(2)] (5), and an unidentified iron(III) species. Oxygenation of 2 exclusively formed di(carboxylato)diiron(III) compounds, a testimony to the role of the macrocylic ligand in preserving the dinuclear iron center under oxidizing conditions. X-ray crystallographic and (57)Fe Mössbauer spectroscopic investigations indicated that 2 reacts with dioxygen to give a mixture of (μ-oxo)diiron(III) [Fe(2)(μ-O)(PIM)(Ar(Tol)CO(2))(2)] (6) and di(μ-hydroxo)diiron(III) [Fe(2)(μ-OH)(2)(PIM)(Ar(Tol)CO(2))(2)] (7) units in the same crystal lattice. Compounds 6 and 7 spontaneously convert to a tetrairon(III) complex, [Fe(4)(μ-OH)(6)(PIM)(2)(Ar(Tol)CO(2))(2)] (8), when treated with excess H(2)O.

Current challenges of modeling diiron enzyme active sites for dioxygen activation by biomimetic synthetic complexes

This tutorial review describes recent progress in modeling the active sites of carboxylate-rich non-heme diiron enzymes that activate dioxygen to carry out several key reactions in Nature. The chemistry of soluble methane monooxygenase, which catalyzes the selective oxidation of methane to methanol, is of particular interest for (bio)technological applications. Novel synthetic diiron complexes that mimic structural, and, to a lesser extent, functional features of these diiron enzymes are discussed. The chemistry of the enzymes is also briefly summarized. A particular focus of this review is on models that mimic characteristics of the diiron systems that were previously not emphasized, including systems that contain (i) aqua ligands, (ii) different substrates tethered to the ligand framework, (iii) dendrimers attached to carboxylates to mimic the protein environment, (iv) two N-donors in a syn-orientation with respect to the iron-iron vector, and (v) a N-rich ligand environment capable of accessing oxygenated high-valent diiron intermediates.

2-Phenoxypyridyl dinucleating ligands for assembly of diiron(II) complexes: efficient reactivity with O(2) to form (mu-Oxo)diiron(III) units

A series of 2-phenoxypyridyl and 2-phenoxyimino ligands, H(2)L(R,R') [2,2'-(5,5'-(1,2-phenylenebis(ethyne-2,1-diyl))bis(pyridine-5,2-diyl))diphenol, where R = H, Me, or t-Bu, and R' = H or Ph] and H(2)BIPS(Me,Ph) [(3,3'-(1E,1'E)-(3,3'-sulfonylbis(3,1-phenylene)bis(azan-1-yl-1-ylidene))bis(methan-1-yl-1-ylidene)bis(5-methylbiphenyl-2-ol)], were synthesized as platforms for nonheme diiron(II) protein model complexes. UV-vis spectrophotometric studies and preparative-scale reactions of L(R,R') or BIPS(Me,Ph), where L(R,R') and BIPS(Me,Ph) are the deprotonated forms of H(2)L(R,R') and H(2)BIPS(Me,Ph), respectively, with iron(II) revealed that the presence of sterically protective o-phenol substituents is necessary to obtain discrete dinuclear species. The reaction of L(Me,Ph) with iron(II) in tetrahydrofuran (THF) afforded the doubly bridged compound [Fe(2)(L(Me,Ph))(2)(THF)(3)] (1), which was characterized in the solid state by X-ray crystallography. A large internal cavity in this complex facilitates its rapid reaction with dioxygen, even at -50 degrees C, to produce the thermodynamically stable [Fe(2)(mu-O)(L(Me,Ph))(2)] (2) species. Reaction of (18)O(2) instead of (16)O(2) with 1 led to a shift in the Fe-O-Fe vibrational frequency from 833 to 798 cm(-1), confirming the presence of the (mu-oxo)diiron(III) core and molecular oxygen as the source of the bridging oxo group. The L(Me,Ph) ligand is robust toward oxidative decomposition and does not display any reversible redox activity.

Modeling the syn disposition of nitrogen donors in non-heme diiron enzymes. Synthesis, characterization, and hydrogen peroxide reactivity of diiron(III) complexes with the syn N-donor ligand H2BPG2DEV

In order to model the syn disposition of histidine residues in carboxylate-bridged non-heme diiron enzymes, we prepared a new dinucleating ligand, H(2)BPG(2)DEV, that provides this geometric feature. The ligand incorporates biologically relevant carboxylate functionalities, which have not been explored as extensively as nitrogen-only analogues. Three novel oxo-bridged diiron(III) complexes, [Fe(2)(mu-O)(H(2)O)(2)(BPG(2)DEV)](ClO(4))(2) (6), [Fe(2)(mu-O)(mu-O(2)CAr(iPrO))(BPG(2)DEV)](ClO(4)) (7), and [Fe(2)(mu-O)(mu-CO(3))(BPG(2)DEV)] (8), were prepared. Single-crystal X-ray structural characterization confirms that two pyridyl groups are bound syn with respect to the Fe-Fe vector in these compounds. The carbonato-bridged complex 8 forms quantitatively from 6 in a rapid reaction with gaseous CO(2) in organic solvents. A common maroon-colored intermediate (lambda(max) = 490 nm; epsilon = 1500 M(-1) cm(-1)) forms in reactions of 6, 7, or 8 with H(2)O(2) and NEt(3) in CH(3)CN/H(2)O solutions. Mass spectrometric analyses of this species, formed using (18)O-labeled H(2)O(2), indicate the presence of a peroxide ligand bound to the oxo-bridged diiron(III) center. The Mossbauer spectrum at 90 K of the EPR-silent intermediate exhibits a quadrupole doublet with delta = 0.58 mm/s and DeltaE(Q) = 0.58 mm/s. The isomer shift is typical for a peroxodiiron(III) species, but the quadrupole splitting parameter is unusually small compared to those of related complexes. These Mossbauer parameters are comparable to those observed for a peroxo intermediate formed in the reaction of reduced toluene/o-xylene monooxygenase hydroxylase with dioxygen. Resonance Raman studies reveal an unusually low-energy O-O stretching mode in the peroxo intermediate that is consistent with a short diiron distance. Although peroxodiiron(III) intermediates generated from 6, 7, and 8 are poor O-atom-transfer catalysts, they display highly efficient catalase activity, with turnover numbers up to 10,000. In contrast to hydrogen peroxide reactions of diiron(III) complexes that lack a dinucleating ligand, the intermediates generated here could be re-formed in significant quantities after a second addition of H(2)O(2), as observed spectroscopically and by mass spectrometry.

Synthesis and Characterization of a Ditriflate-Bridged, Diiron(II) Complex with Syn-N-Donor Ligands: [Fe(2)(μ-OTf)(2)(PIC(2)DET)(2)](BARF)(2)

The synthesis and characterization of the diiron(II) complex [Fe(2)(μ-OTf)(2)-(PIC(2)DET)(2)](BARF)(2) (2), where PIC(2)DET is a 2,3-diethynyltriptycene-linked dipicolinic methyl ester ligand, are described. The dication in 2, contains, [Fe(2)(μ-OTf)(2)(PIC(2)DET)(2)](2+) two symmetry-equivalent iron atoms with octahedral coordination geometries. Each metal ion has a N(2)O(4) atom donor set that includes four atoms from two picolinic ester N,O chelate rings, as well as two oxygen atoms from the bridging trifluoromethanesulfonate groups. The Fe(2)(μ-OTf)(2) core of 2 is stabilized by two PIC(2)DET ligands that bind the two metal ions in a head-to-head fashion, leading to an Fe···Fe distance of 5.173(1)Å. Molar conductivity data for 2 are consistent with Fe(2)(μ-OTf)(2)(PIC(2)DET)(2)](2+) retaining its identity in acetone solutions, where it behaves as a 2:1 electrolyte. (1)H NMR spectroscopic, solution (d(6)-acetone) and solid-state magnetic susceptibility data all indicate that the iron atoms of 2 are high-spin (S = 2). A fit of the magnetic data (2 - 300K) to a spin-only isotropic exchange Hamiltonian H = -2JS(1)·S(2) are consistent with weak antiferromagnetic coupling between the two iron atoms with J ~ -0.99(2) cm(-1) and g = 2.10(1).

Iron substitution for sodium in a carboxylate-bridged, heterodinuclear sodium-iron complex

The synthesis and structural characterization of the carboxylate-bridged, heterodinuclear iron-sodium complex [NaFe(PIC2DET)(mu-O2CTrp)3] (2), where PIC2DET (1) is a 2,3-diethynyltriptycene-linked dipicolinic methyl ester ligand and Trp is 9-triptycenyl, are described. The metal ions in 2 are bridged by three triptycene carboxylates with an Fe...Na distance of 3.181(2) A, and each is coordinated to a pyridine nitrogen and carbonyl oxygen atom of 1, forming two five-membered chelate rings. A linkage isomer in which Fe1 is bound by the other ester oxygen atom of 1 was identified by X-ray crystallographic analysis. Treatment of 2 with Fe(OTf)2.2MeCN resulted in substitution of sodium by iron(II) to give the cationic diiron(II) complex [Fe2(PIC2DET)(mu-O2CTrp)3][OTf] (3). This reaction was investigated by UV-vis, IR, MS, and stopped-flow spectroscopy. The substitution is first order with respect to 2 and zero order with respect to Fe(OTf)2.2MeCN (kobs = 21 +/- 2 s-1), consistent with a dissociative mechanism. A positive enthalpy of activation (DeltaH = 59 +/- 6 kJ mol-1) and negative entropy of activation (DeltaS = -20 +/- 6 J mol-1 K-1) were calculated from the temperature dependence of the rate-determining dissociation step.