Single-walled carbon nanotubes template the one-dimensional ordering of a polythiophene derivative

Dispersion of Single-Walled Carbon Nanotubes by Aromatic Cyclic Schiff Bases via Non-Covalent Interactions

One of the challenging issues that hinders the application of single-walled carbon nanotubes (SWCNTs) is the poor solubility and the inevitable formation of bundles. Efforts still need to be made towards solving the problem. Herein, we report a non-covalent strategy to disperse aggregated SWCNTs by aromatic cyclic Schiff bases assisted by ultrasonic techniques. The aromatic cyclic Schiff base (OMM) was synthesized via Schiff base reactions, and the molecular structure was determined by ATR-FT-IR, solid-state 13C-NMR, and HRMS. Although the yielded product showed poor solubility in aqueous solution and organic solvents, it could interact with and disperse the aggregated SWCNTs in dimethyl formamide (DMF) under the condition of ultrasound. UV-vis-NIR, FL, Raman spectra, AFM, and TEM, along with computer simulations, provide evidence for the interactions between OMM molecules and SWCNTs and the dispersion thereof. The semiconductive (7,5), (8,6), (12,1), and (9,7)-SWCNTs expressed a preference for dissolution. The capability of dispersion is contributed by π-π, C-H·π, and lone pair (lp)·π interactions between OMM and SWCNTs based on the simulated results. The present non-covalent strategy could provide inspiration for preparing organic cyclic compounds as dispersants for SWCNTs and then facilitate their further utilization.

Anisotropic Photoluminescence of Poly(3-hexyl thiophene) and Their Composites with Single-Walled Carbon Nanotubes Highly Separated in Metallic and Semiconducting Tubes

In this work, the effect of the single-walled carbon nanotubes (SWNTs) as the mixtures of metallic and semiconducting tubes (M + S-SWNTs) as well as highly separated semiconducting (S-SWNTs) and metallic (M-SWNTs) tubes on the photoluminescence (PL) of poly(3-hexyl thiophene) (P3HT) was reported. Two methods were used to prepare such composites, that is, the chemical interaction of the two constituents and the electrochemical polymerization of the 3-hexyl thiophene onto the rough Au supports modified with carbon nanotubes (CNTs). The measurements of the anisotropic PL of these composites have highlighted a significant diminution of the angle of the binding of the P3HT films electrochemical synthetized onto Au electrodes covered with M + S-SWNTs. This change was attributed to metallic tubes, as was demonstrated using the anisotropic PL measurements carried out on the P3HT/M-SWNTs and P3HT/S-SWNTs composites. Small variations in the angle of the binding were reported in the case of the composites prepared by chemical interaction of the two constituents. The proposed mechanism to explain this behavior took into account the functionalization process of CNTs with P3HT. The experimental arguments of the functionalization process of CNTs with P3HT were shown by the UV-VIS-NIR and FTIR spectroscopy as well as surface-enhanced Raman scattering (SERS). A PL quenching process of P3HT induced both in the presence of S-SWNTs and M-SWNTs was reported, too. This process origins in the various de-excitation pathways which can be developed considering the energy levels diagram of the two constituents of each studied composite.

DNA-Assisted Dispersion of Carbon Nanotubes and Comparison with Other Dispersing Agents

Separation and sorting of pristine carbon nanotubes (CNTs) from bundle geometry is a very challenging task due to the insoluble and nondispersive nature of CNTs in aqueous medium. Recently, many studies have been performed to address this problem using various organic and inorganic solutions, surfactant molecules, and biomolecules as dispersing agents. Recent experimental studies have reported the DNA to be highly efficient in dispersing CNTs from bundle geometry. However, there is no microscopic study and also quantitative estimation of the dispersion efficiency of the DNA. Using all-atom molecular dynamics simulation, we study the structure and stability of single-stranded DNA (ssDNA)-single-walled carbon nanotube (SWNT) (6,5) complex. To quantify the dispersion efficiency of various DNA sequences, we perform potential of mean forces (PMF) calculation between two bare SWNTs as well ssDNA-wrapped CNTs for different base sequences. From the PMF calculation, we find the PMF between two bare (6,5) SWNTs to be approximately -29 kcal/mol. For the ssDNA-wrapped SWNTs, the PMF reduces significantly and becomes repulsive. In the presence of ssDNA of different polynucleotide bases (A, T, G, and C), we present a microscopic picture of the ssDNA-SWNT (6,5) complex and also a quantitative estimate of the interaction strength between nanotubes from PMF calculation. From PMF, we show the sequence of dispersion efficiency for four different nucleic bases to be T > A > C > G. We have also presented a comparison of the dispersion efficiencies of ssDNA, flavin mononucleotide surfactant, and poly(amidoamine) (PAMAM) dendrimer by comparing their respective PMF values.

Dendrimer assisted dispersion of carbon nanotubes: a molecular dynamics study

Various unique physical, chemical, mechanical and electronic properties of carbon nanotubes (CNTs) make them very useful materials for diverse potential application in many fields. Experimentally synthesized CNTs are generally found in bundle geometry with a mixture of different chiralities and present a unique challenge to separate them. In this paper we have proposed the PAMAM dendrimer to be an ideal candidate for this separation. To estimate the efficiency of the dendrimer for the dispersion of CNTs from the bundle geometry, we have calculated potential of mean forces (PMF). Our PMF study of two dendrimer-wrapped CNTs shows lesser binding affinity compared to the two bare CNTs. PMF study shows that the binding affinity decreases for non-protonated dendrimer, and for the protonated case the interaction is fully repulsive in nature. For both the non-protonated as well as protonated cases, the PMF increases gradually with increasing dendrimer generations from 2 to 4 compared to the bare PMF. We have performed PMF calculations with (6,5) and (6,6) chirality to study the chirality dependence of PMF. Our study shows that the PMFs between two (6,5) and two (6,6) CNTs respectively are ∼-29 kcal mol^-1 and ∼-27 kcal mol^-1. Calculated PMF for protonated dendrimer-wrapped chiral CNTs is more compared to the protonated dendrimer-wrapped armchair CNTs for all the generations studied. However, for non-protonated dendrimer-wrapped CNTs, such chirality dependence is not very prominent. Our study suggests that the dispersion efficiency of the protonated dendrimer is more compared to the non-protonated dendrimer and can be used as an effective dispersing agent for the dispersion of CNTs from the bundle geometry.

Composite films of poly(3-hexylthiophene) grafted single-walled carbon nanotubes for electrochemical detection of metal ions

In this study, we prepared electrochemically active films of poly(3-hexylthiophene) grafted single-walled carbon nanotubes (SWNT-g-P3HT) by using a modified vacuum-assisted deposition approach, in which a SWNT-g-P3HT composite layer of various thicknesses was deposited on the top of a thin SWNT layer. Measurement of the optical and electrical properties of the SWNT-g-P3HT composite films demonstrated that the thickness of the SWNT-g-P3HT composite films was controllable. The data of transmission electron microscope observation and Raman spectroscopy indicated that the covalent grafting of P3HT onto the surfaces of SWNTs resulted in intimate and stable connectivity between the two components in the SWNT-g-P3HT composite. Capitalizing on these unique features, we successfully developed a new class of electrochemical sensors that used the SWNT-g-P3HT composite films deposited on an indium-tin oxide substrate as an electrochemical electrode for detection of metal ions. Significantly, such a SWNT-g-P3HT composite electrode showed advantages in selective, quantitative, and more sensitive detection of Ag(+) ions.

25th anniversary article: carbon nanotube- and graphene-based transparent conductive films for optoelectronic devices

Carbon nanotube (CNT)- and graphene (G)-based transparent conductive films (TCFs) are two promising alternatives for commonly-used indium tin oxide-based TCFs for future flexible optoelectronic devices. This review comprehensively summarizes recent progress in the fabrication, properties, modification, patterning, and integration of CNT- and G-TCFs into optoelectronic devices. Their potential applications and challenges in optoelectronic devices, such as organic photovoltaic cells, organic light emitting diodes and touch panels, are discussed in detail. More importantly, their key characteristics and advantages for use in these devices are compared. Despite many challenges, CNT- and G-TCFs have demonstrated great potential in various optoelectronic devices and have already been used for some products like touch panels of smartphones. This illustrates the significant opportunities for the industrial use of CNTs and graphene, and hence pushes nanoscience and nanotechnology one step towards practical applications.

Polyvinylferrocene for noncovalent dispersion and redox-controlled precipitation of carbon nanotubes in nonaqueous media

We report noncovalent dispersion of carbon nanotubes (CNTs) in organic liquids with extremely high loading (∼2 mg mL(-1)) using polyvinylferrocene (PVF). In contrast to common dispersants, PVF does not contain any conjugated structures or ionic moieties. PVF is also shown to be effective in controlling nanotube dispersion and reprecipitation because it exhibits redox-switchable affinity for solvents, while maintaining stable physical attachment to CNTs during redox transformation. This switchability provides a novel approach to creating CNT-functionalized surfaces. The material systems described here offer new opportunities for applications of CNTs in nonaqueous media, such as nanotube-polymer composites and organic liquid-based optical limiters, and expand the means of tailoring nanotube dispersion behavior via external stimuli, with potential applications in switching devices. The PVF/CNT hybrid system with enhanced redox response of ferrocene may also find applications in high-performance biosensors and pseudocapacitors.

Mechanochemistry of fullerenes and related materials

The low or lack of solubility of fullerenes, carbon nanotubes and graphene/graphite in organic solvents and water severely hampers the study of their chemical functionalizations and practical applications. Covalent and noncovalent functionalizations of fullerenes and related materials via mechanochemistry seem appealing to tackle these problems. In this review article, we provide a comprehensive coverage on the mechanochemical reactions of fullerenes, carbon nanotubes and graphite, including dimerizations and trimerizations, nucleophilic additions, 1,3-dipolar cycloadditions, Diels-Alder reactions, [2 + 1] cycloadditions of carbenes and nitrenes, radical additions, oxidations, etc. It is intriguing to find that some reactions of fullerenes can only proceed under solvent-free conditions or undergo different reaction pathways from those of the liquid-phase counterparts to generate completely different products. We also present the application of the mechanical milling technique to complex formation, nanocomposite formation and enhanced hydrogen storage of carbon-related materials.

Unzipped multiwalled carbon nanotube oxide/multiwalled carbon nanotube hybrids for polymer reinforcement

Multiwalled carbon nanotubes (MWNTs) have been widely used as nanofillers for polymer reinforcement. However, it has been restricted by the limited available interface area of MWNTs in the polymer matrices. Oxidation unzipping of MWNTs is an effective way to solve this problem. The unzipped multiwalled carbon nanotube oxides (UMCNOs) exhibit excellent enhancement effect with low weight fractions, but agglomeration of UMCNOs at a relatively higher loading still hampered the mechanical reinforcement of polymer composites. In this paper, we interestingly found that the dispersion of UMCNOs in polymer matrices can be significantly improved with the combination of pristine MWNTs. The hybrids of MWNTs and UMCNOs (U/Ms) can be easily obtained by adding the pristine MWNTs into the UMCNOs aqueous dispersion, followed by sonication. With a π-stacking interaction, the UMCNOs were attached onto the outwalls of MWNTs. The morphologies and structure of the U/Ms were characterized by several measurements. The mechanical testing of the resultant poly(vinyl alcohol) (PVA)-based composites demonstrated that the U/Ms can be used as ideal reinforcing fillers. Compared to PVA, the yield strength and Young's modulus of U/M-PVA composites with a loading of 0.7 wt % of the U/Ms approached ∼145.8 MPa and 6.9 GPa, respectively, which are increases of ∼107.4% and ∼122.5%, respectively. The results of tensile tests demonstrated that the reinforcement effect of U/Ms is superior to the individual UMCNOs and MWNTs, because of the synergistic interaction of UMCNOs and MWNTs.

Effect of side-chain structure of rigid polyimide dispersant on mechanical properties of single-walled carbon nanotube/cyanate ester composite

Three kinds of polymer, polyimide without side-chain (PI), polyimide-graft-glyceryl 4-nonylphenyl ether (PI-GNE), and polyimide-graft-bisphenol A diglyceryl acrylate (PI-BDA), have been synthesized and used to disperse single-walled carbon nanotubes (SWNTs) and to improve the interfacial bonding between SWNTs and cyanate ester (CE) matrix. Visual observation, UV-vis-near-IR (UV-vis-NIR) spectra, and atomic force microscopy (AFM) images show that both PI-GNE and PI-BDA are highly effective at dispersing and debundling SWNTs in DMF, whereas PI is less effective. Interaction between SWNTs and PI, PI-GNE or PI-BDA was confirmed by computer simulation and Raman spectra. A series of CE-based composite films reinforced with different loadings of SWNTs, SWNTs/PI, SWNTs/PI-GNE and SWNTs/PI-BDA were prepared by solution casting. It was found that, because of the unique side-chain structure of PI-BDA, SWNTs/PI-BDA disperse better in CE matrix than do SWNTs/PI-GNE, SWNTs/PI, and SWNTs. As a result, SWNTs/PI-BDA/CE composites have the greatest improvement in mechanical properties of the materials tested. These results imply that the choice of side-chain on a dispersant is very important to the dispersion of SWNTs in matrix and the filler/matrix interfacial adhesion, which are two key requirements for achieving effective reinforcement.

Ball-milling modification of single-walled carbon nanotubes: purification, cutting, and functionalization

Single-walled carbon nanotubes (SWNTs) can be successfully cut with relatively homogeneous sizes using a planetary mill. The optimized conditions produce highly dispersible SWNTs that can be efficiently functionalized in a variety of synthetic ways. As clearly shown by Raman spectroscopy, the milling/cutting procedure compares very favorably with the most common way of purifying SWNTs, namely, treatment with strong oxidizing acids. Moreover a similar milling process can be used to functionalize and cut pristine SWNTs by one-step nitrene chemistry.

'Supramolecular wrapping chemistry' by helix-forming polysaccharides: a powerful strategy for generating diverse polymeric nano-architectures

We have exploited novel supramolecular wrapping techniques by helix-forming polysaccharides, β-1,3-glucans, which have strong tendency to form regular helical structures on versatile nanomaterials in an induced-fit manner. This approach is totally different from that using the conventional interpolymer interactions seen in both natural and synthetic polymeric architectures, and therefore has potential to create novel polymeric architectures with diverse and unexpected functionalities. The wrapping by β-1,3-glucans enforces the entrapped guest polymer to adopt helical or twisted conformations through the convergent interpolymer interactions. On the contrary, the wrapping by chemically modified semi-artificial β-1,3-glucans can bestow the divergent self-assembling abilities on the entrapped guest polymer to create hierarchical polymeric architectures, where the polymer/β-1,3-glucan composite acts as a huge one-dimensional building block. Based on the established wrapping strategy, we have further extended the wrapping techniques toward the creation of three-dimensional polymeric architectures, in which the polymer/β-1,3-glucan composite behaves as a sort of amphiphilic block copolymers. The present wrapping system would open several paths to accelerate the development of the polymeric supramolecular assembly systems, giving the strong stimuli to the frontier of polysaccharide-based functional chemistry.

Evidence for high-efficiency exciton dissociation at polymer/single-walled carbon nanotube interfaces in planar nano-heterojunction photovoltaics

There is significant interest in combining carbon nanotubes with semiconducting polymers for photovoltaic applications because of potential advantages from smaller exciton transport lengths and enhanced charge separation. However, to date, bulk heterojunction (BHJ) devices have demonstrated relatively poor efficiencies, and little is understood about the polymer/nanotube junction. To investigate this interface, we fabricate a planar nano-heterojunction comprising well-isolated millimeter-long single-walled carbon nanotubes underneath a poly(3-hexylthiophene) (P3HT) layer. The resulting junctions display photovoltaic efficiencies per nanotube ranging from 3% to 3.82%, which exceed those of polymer/nanotube BHJs by a factor of 50-100. The increase is attributed to the absence of aggregate formation in this planar device geometry. It is shown that the polymer/nanotube interface itself is responsible for exciton dissociation. Typical open-circuit voltages are near 0.5 V with fill factors of 0.25-0.3, which are largely invariant with the number of nanotubes per device and P3HT thickness. A maximum efficiency is obtained for a 60 nm-thick P3HT layer, which is predicted by a Monte Carlo simulation that takes into account exciton generation, transport, recombination, and dissociation. This platform is promising for further understanding the potential role of polymer/nanotube interfaces for photovoltaic applications.

Flash nano-welding: investigation and control of the photothermal response of ultrathin bismuth sulfide nanowire films

Ultrathin Bi₂S₃ nanowires undergo a pronounced photothermal response to irradiation from a commercial camera flash. Controlled nano-welding was shown by using single walled carbon nanotube mats as an electrically and thermally conductive substrate. The resulting welded nanowire film is denser and has significantly lower resistance than unflashed bilayer films.

Phase transfer catalysts drive diverse organic solvent solubility of single-walled carbon nanotubes helically wrapped by ionic, semiconducting polymers

Use of phase transfer catalysts such as 18-crown-6 enables ionic, linear conjugated poly[2,6-{1,5-bis(3-propoxysulfonicacidsodiumsalt)}naphthylene]ethynylene (PNES) to efficiently disperse single-walled carbon nanotubes (SWNTs) in multiple organic solvents under standard ultrasonication methods. Steady-state electronic absorption spectroscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) reveal that these SWNT suspensions are composed almost exclusively of individualized tubes. High-resolution TEM and AFM data show that the interaction of PNES with SWNTs in both protic and aprotic organic solvents provides a self-assembled superstructure in which a PNES monolayer helically wraps the nanotube surface with periodic and constant morphology (observed helical pitch length = 10 ± 2 nm); time-dependent examination of these suspensions indicates that these structures persist in solution over periods that span at least several months. Pump-probe transient absorption spectroscopy reveals that the excited state lifetimes and exciton binding energies of these well-defined nanotube-semiconducting polymer hybrid structures remain unchanged relative to analogous benchmark data acquired previously for standard sodium dodecylsulfate (SDS)-SWNT suspensions, regardless of solvent. These results demonstrate that the use of phase transfer catalysts with ionic semiconducting polymers that helically wrap SWNTs provide well-defined structures that solubulize SWNTs in a wide range of organic solvents while preserving critical nanotube semiconducting and conducting properties.

Synthesis and spectroscopic characterization of solution processable highly ordered polythiophene-carbon nanotube nanohybrid structures

We report on the synthesis and spectroscopic study of a novel highly ordered nanohybrid structure consisting of a single-walled carbon nanotube (SWNT) coated with highly crystalline regio-regular poly(3-hexylthiophene) (rrP3HT) and discuss the applicability of the nanohybrids in organic photovoltaics. The use of a solvent extraction technique allows the nanohybrids to be produced with a high yield and high purity. We find evidence that the crystallinity of rrP3HT is enhanced in the presence of SWNTs, which introduces a reduced optical band gap and increased carrier mobility in the polymer. Study of the photoluminescence excitation spectra of the SWNTs reveals an efficient energy transfer of excitons created on the rrP3HT to the SWNTs. This energy transfer is expected to limit our ability to use the nanohybrids as a charge separating interface and can therefore explain the low efficiency of P3HT-SWNT solar cells produced to date. In addition, careful consideration of the energy transfer is necessary when attempting to improve state of the art polymer-fullerene photovoltaic devices with SWNTs in order to make use of their high charge carrier mobilities and increased rrP3HT crystallinity.

Polymer-assisted direct deposition of uniform carbon nanotube bundle networks for high performance transparent electrodes

Flexible transparent electrodes are crucial for touch screen, flat panel display, and solar cell technologies. While carbon nanotube network electrodes show promise, characteristically poor dispersion properties have limited their practicality. We report that addition of small amounts of conjugated polymer to nanotube dispersions enables straightforward fabrication of uniform network electrodes by spin-coating and simultaneous tuning of parameters such as bundle size and density. After treatment in thionyl chloride, electrodes have sheet resistances competitive with other reported carbon nanotube based transparent electrodes to date.