Convenient Synthesis of Green Diisoindolodithienylpyrromethene−Dialkynyl Borane Dyes

Red-to-Near-Infrared Emitting PyrrolylBODIPY Dyes: Synthesis, Photophysical Properties and Bioimaging Application

Near-infrared (NIR) fluorophores with characteristics such as deep tissue penetration, minimal damage to the biological samples, and low background interference, are highly sought-after materials for in vivo and deep-tissue fluorescence imaging. Herein, series of 3-pyrrolylBODIPY derivatives and 3,5-dipyrrolylBODIPY derivatives have been prepared by a facile regioselective nucleophilic aromatic substitution reaction (S_N Ar) on 3,5-halogenated BODIPY derivatives (3,5-dibromo or 2,3,5,6-tetrachloroBODIPYs) with pyrroles. The installation of a pyrrolic unit onto the 3-position of the BODIPY chromophore leads to a dramatic red shift of both the absorption (up to 160 nm) and the emission (up to 260 nm) in these resultant 3-pyrrolylBODIPYs with respect to that of the BODIPY chromophore. Their further 5-positional functionalization provides a facile way to fine tune their photophysical properties, and these resulting dipyrrolylBODIPYs and functionalized pyrrolylBODIPYs show strong absorption in the deep red-to-NIR regions (595-684 nm) and intense NIR fluorescence emission (650-715 nm) in dichloromethane. To demonstrate the applicability of these functionalized pyrrolylBODIPYs as NIR fluorescent probes for cell imaging, pyrrolylBODIPY 6 a containing mitochondrion-targeting butyltriphenylphosphonium cationic species was also prepared. It selectively localized in mitochondria of HeLa cells, with low cytotoxicity and intense deep red fluorescence emission.

New luminescent tetracoordinate boron complexes: an in-depth experimental and theoretical characterisation and their application in OLEDs

New luminescent 2-iminopyrrolyl boron complexes with different BX2 moieties are extensively studied via complementary experimental and theoretical methodologies, including application in OLEDs.

Synthesis and Functions of Oligomeric and Multidentate Dipyrrin Derivatives and their Complexes

The dipyrrin–metal complexes and especially the boron complex 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) have recently attracted considerable attention because of their interesting properties and possible applications. We have developed two unique and useful ways to extend versatility and usefulness of the dipyrrin complexes. The first one is the linear and macrocyclic oligomerization of the BODIPY units. These arrangements of the B–F moieties of the oligomerized BODIPY units provide sophisticated functions, such as unique recognition ability toward cationic guest, associated with changes in the photophysical properties by utilizing unprecedented interactions between the B–F and a cationic species. The second one is introduction of additional ligating moieties into the dipyrrin skeleton. The multidentate N2Ox dipyrrin ligands thus obtained form a variety of complexes with 13 and 14 group elements, which are difficult to synthesize using the original N2 dipyrrin derivatives. Interestingly, these unique complexes exhibit novel structures, properties, and functions such as guest recognition, stimuli-responsive structural conversion, switching of the optical properties, excellent stability of the neutral radicals, etc. We believe that these multifunctional dipyrrin complexes will advance the basic chemistry of the dipyrrin complexes and develop their applications in the materials and medicinal chemistry fields.

1 Introduction

2 Linear Oligomers of Boron–Dipyrrin Complexes

3 Cyclic Oligomers of Boron–Dipyrrin Complexes

4 A Cyclic Oligomer of Zinc–Dipyrrin Complexes

5 Group 13 Element Complexes of N2Ox Dipyrrins

6 Chiral N2 and N2Ox Dipyrrin Complexes

7 Group 14 Element Complexes of N2O2 Dipyrrins

8 Other N2O2 Dipyrrin Complexes with Unique Properties and Functions

9 Conclusion

Anchoring BODIPY photosensitizers enable pan-microbial photoinactivation

Photodynamic antimicrobial chemotherapy (PACT) is an effective strategy to inactivate pathogenic and resistant microbes. However, pan-microbial photoinactivation has hardly achieved. In this manuscript, we built anti-microbial PSs based on 2,6-diiodo-1,3,5,7-tetramethyl BODIPY (2I-BDP) using anchoring strategy through modifications on boron atom with bis-cationic moieties. With appropriate bis-cationic anchoring, we could achieve effective PACT for pan-microbial photoinactivation via straight forward modifications. Our studies suggested that integration of an efficient photosensitizer, good amphiphilicity, as well as tight interaction with microbial membrane could be essential for effective PACT.

Synthesis of structured polysiloxazanes via a Piers-Rubinsztajn reaction

A series of siloxazanes were successfully prepared by a Piers-Rubinsztajn reaction between methoxydisilazanes and the corresponding hydrosilanes. Polysiloxazanes with narrow dispersion were also synthesized from methoxydisilazanes and Si-H terminated oligosiloxanes. The possible interaction mechanism between tris(pentafluorophenyl)borane and the methoxydisilazane was investigated.

Recent advances in the synthesis of [a]-benzo-fused BODIPY fluorophores

This feature article summarizes the different strategies for the synthesis of [a]-benzo-fused BODIPYs that have been reported in the literature until 2018. These π-extended BODIPYs are promising fluorophores for bio-imaging and organic photovoltaic applications due to both their attractive photophysical properties in the near-infrared area and their higher (photo)chemical stability compared to conventional bis-styryl derivatives. The four main strategies described in this review can be used to access either directly the expected [a]-benzo-fused BODIPYs or through the di-/tetra-hydroisoindole.

Five-State Rotary Nanoswitch

In our quest to develop artificial multistate devices, we synthesized the nanomechanical switch 1 that is characterized by a tetrahedral core equipped with four pending arms. The rotary arm with its azaterpyridine terminal is intramolecularly coordinated to a zinc(II) porphyrin station that is the terminus of another arm in 1. The two other arms carry identical sterically shielded phenanthroline stations. The 2-fold alternate addition of a copper(I) ion and [1,10]-phenanthroline (1 equiv each) results in the formation of five different switching states (State I→ State II→ State III→ State IV→ State V → State I), which force the toggling arm to move back and forth between the zinc(II) porphyrin and phenanthroline stations separated by a distance of 25 Å. All switching states constitute clean single species, except for State III, and thus are fully characterized by spectroscopic methods and elemental analysis. Finally, the initial state of nanoswitch was reset by addition of cyclam for complete removal of the copper(I) ions.

Unique photophysical properties of 9-styryl-1,2-dihydropyrrolo[3,4-β]indolizin-3-one and its efficient synthesis via direct C-H activation

A styryl Seoul-Fluor (SF) skeleton was rationally designed by introducing an olefin unit at the C-9 of 1,2-dihydropyrrolo[3,4-β]indolizin-3-one via regioselective direct C-H activation. We synthesized a series of styryl SF analogues, maintaining unique photophysical properties that can be systematically controlled by the electronic characteristics of the substituents, with an average bathochromic shift of 39 nm in emission maxima.

Rational Improvement of Molar Absorptivity Guided by Oscillator Strength: A Case Study with Furoindolizine-Based Core Skeleton

The rational improvement of photophysical properties can be highly valuable for the discovery of novel organic fluorophores. Using our new design strategy guided by the oscillator strength, we developed a series of full-color-tunable furoindolizine analogs with improved molar absorptivity through the fusion of a furan ring into the indolizine-based Seoul fluorophore. The excellent correlation between the computable values (oscillator strength and theoretical S0 -S1 energy gap) and photophysical properties (molar absorptivity and emission wavelength) confirmed the effectualness of our design strategy.

Functionalization of 3,5,8-trichlorinated BODIPY dyes

Catalytic hydrogenation of dibenzyl 5-dipyrroketone-2,9-dicarboxylates followed by decarboxylative iodination affords a 2,9-diiododipyrroketone which gives a 2,5,9-trichlorodipyrromethene hydrochloride after nucleophilic addition/elimination, with adventitious chloride to replace the two iodide groups. Treatment with BF3·Et2O gives a 3,5,8-trichloro-BODIPY that readily undergoes regioselective Stille coupling at the 8-position, or homo/mixed couplings at the 3,8- or 3,5- and 8-positions. Stepwise and controlled replacement of the 3,5- and 8-chlorine atoms using Stille reagents results in formation of a completely unsymmetrical trisubstituted BODIPY. Several examples of unsymmetrical BODIPYs were synthesized and characterized using this methodology. Structure features of new BODIPYs are discussed within the context of 14 new X-ray structures, and photophysical parameters of all new BODIPY compounds are reported and discussed.

NIR-fluorescent coumarin-fused BODIPY dyes with large Stokes shifts

A series of novel non-symmetrical coumarin-fused BODIPY dyes were synthesised. Their absorption and emission properties are strongly influenced by substitution in the coumarin moiety. Diethylamino-substituted dyes showed near-IR emission with large Stokes shifts (up to 144 nm) and good fluorescence quantum yields.

Ion responsive near-IR BODIPY dyes: two isomers, two different signals

Different responses of two isomeric tetrastyryl-BODIPY's were studied, shedding light on the path to near IR sensors for metal ions.

Long-wavelength, photostable, two-photon excitable BODIPY fluorophores readily modifiable for molecular probes

Near-infrared (NIR) fluorescent probes are increasingly popular in biological imaging and sensing, as long-wavelength (650-900 nm) excitation and emission have the advantages of minimum photodamage, deep tissue penetration, and minimum interference from autofluorescence in living systems. Here, a series of long-wavelength BODIPY dyes SPC, DC-SPC, DPC, and DC-DPC are synthesized conveniently and efficiently. They exhibit excellent photophysical properties in far red to near-infrared region, including large extinction coefficients, high fluorescence quantum yields, good photostability, and reasonable two-photon absorption cross section. Comparison of single-molecular imaging confirms that DPC is a much more efficient and more photostable NIR fluorophore than the commonly used Cy5. Also importantly, two kinds of convenient functionalization sites have been reserved: the aryl iodide for organometallic couplings and the terminal alkyne groups for click reactions. Further derivatives DC-SPC-PPh3 exhibit specificity to localize in mitochondria. The introduction of triphenylphosphonium (TPP) moieties mediates its hydrophilic-lipophilic balance and makes DC-SPC-PPh3 appropriate for cell labeling. Their long-wavelength emission at ∼650 nm can efficiently avoid the spectral crosstalk with other probes emitting in the visible light region. Superior photostability, low cytotoxicity, and two-photon excitable properties demonstrate its utility as a standard colocalizing agent to estimate the other probes' local distribution.

Highly sensitive NH3 detection based on organic field-effect transistors with tris(pentafluorophenyl)borane as receptor

We have increased organic field-effect transistor (OFET) NH(3) response using tris(pentafluorophenyl)borane (TPFB) as a receptor. OFETs with this additive could detect concentrations of 450 ppb v/v, with a limit of detection of 350 ppb, the highest sensitivity reported to date for semiconductor films; in comparison, when triphenylmethane (TPM) or triphenylborane (TFB) was used as an additive, no obvious improvement in the sensitivity was observed. These OFETs also showed considerable selectivity with respect to common organic vapors and stability toward storage. Furthermore, excellent memory of exposure was achieved by keeping the exposed devices in a sealed container stored at -30 °C, the first such capability demonstrated with OFETs.