Fluorescence photoactivation by ligand exchange around the boron center of a BODIPY chromophore

Synthesis and In Vitro Biocompatibility Studies of Novel Alkoxy 4,4-Difluoro-4-bora-3a,4a-diaza-s-indacenes

BODIPYs are bicyclic aromatic compounds with unique spectroscopic, photophysical, and chemical properties. This study aimed to find BODIPYs with characteristics biocompatible with human cell lines for possible use as imaging agents. Six BODIPY derivatives were synthesised with groups linked to boron, fluorine, phenol, or catechol, resulting in compounds with different physicochemical characteristics. NMR, absorption, and emission spectroscopy and mass spectrometry were subsequently used to characterise them. Afterwards, the biocompatibility of these compounds was evaluated using MTT, SRB, and cellular uptake assays in A549 and H1299 cell lines. Furthermore, a haemolysis assay was performed on human blood cells. To summarise the main results, BODIPYs 1 to 4 showed considerable fluorescence. In contrast, BODIPYs 5 and 6 showed very weak fluorescence, which could be related to the presence of the catechol group and its quenching properties. Regarding biocompatibility, all compounds had metabolic activity and viability above 80% and 70%, respectively. BODIPYs 3 and 6 presented the most consistent data, demonstrating good uptake and, in general, haemolytic activity below 25%. In conclusion, the cytotoxic effects of the compounds were not considerable, and the presence of cyclic alkoxides in BODIPYs 3 and 6 may introduce exciting features that should be highlighted for dual imaging for BODIPY 3 due to its fluorescence or for radioactive labelling in the case of both BODIPYs.

BODIPY derivatives as fluorescent reporters of molecular activities in living cells

Fluorescent compounds have become indispensable tools for imaging molecular activities in the living cell. 4,4-Difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is currently one of the most popular fluorescent reporters due to its unique photophysical properties. This review provides a general survey and presents a summary of recent advances in the development of new BODIPY-based cellular biomarkers and biosensors. The review starts with the consideration of the properties of BODIPY derivatives required for their application as cellular reporters. Then review provides examples of the design of sensors for different biologically important molecules, ions, membrane potential, temperature and viscosity defining the live cell status. Special attention is payed to BODPY-based phototransformable reporters.

The bibliography includes 339 references.

Wavelength dependent photochemistry of BODIPY-phenols and their applications in the fluorescent labeling of proteins

A series of BODIPY dyes were synthesized, that were at the 3, or 3 and 5 positions, substituted by photochemically reactive quinone methide (QM) precursor moieties. Fluorescence properties of the molecules were investigated and we demonstrated that the molecules undergo wavelength dependent photochemistry. Photodeamination to deliver QMs takes place only upon excitation to higher excited singlet states, showing unusual anti-Kasha photochemical reactivity. The findings were corroborated by TD-DFT computations. Laser flash photolysis experiments could not reveal QMs due to the low efficiency of their formation, but enabled the detection of phenoxyl radicals. The applicability of the molecules for the fluorescent labeling of bovine serum albumin as a model protein upon photoexcitation at 350 nm was demonstrated.

Synthesis of near-infrared absorbing and fluorescent bis(pyrrol-2-yl)squaraines and their halochromic properties

1,2-Squaraines (partially conjugated neutral structure) showed blue-shifted λmax compared to the corresponding 1,3-squaraines (fully conjugated zwitterionic structure) and the mono-protonated thiophene-fused 1,3-squaraine showed λmax at 1007 nm.

Porphyrin-Ryleneimide Hybrids: Low-Bandgap Acceptors in Energy-Transfer Cassettes

Energy-transfer cassettes consisting of naphthaleneimide-fused metalloporphyrin acceptors (M=Zn and Pd) and BODIPY donors have been designed and synthesized. These systems have rigid pseudo-tetrahedral structures with a donor-acceptor separation of ca. 17.5 Å. Spectroscopic investigations, including femtosecond transient absorption measurements, showed efficient excitation energy transfer (EET) occurring according to the Förster mechanism. Strong fluorescence of the donor units and significant spectral overlap of the donor and acceptor subunits are prerequisites for the efficient EET in these systems.

Optical writing and single molecule reading of photoactivatable and silver nanoparticle-enhanced fluorescence

We designed a hybrid nanoparticle-molecular system composed of silver nanostructures (AgNP) and a fluorogenic boron dipyrromethene (BODIPY) that can be selectively activated by UVA or UVC light in the presence of an appropriate photoacid generator (PAG). Light irradiation of the PAG encourages the release of p-toluenesulfonic, triflic or hydrobromic acid, any of which facilitate optical 'writing' by promoting the formation of a fluorescent species. Metal-enhanced fluorescence (MEF) by AgNP was achieved through rational design of the nano-molecular system in accordance with the principles of radiative decay engineering. In addition to increasing signal to noise, AgNP permitted shorter reaction times and low irradiance - all of which have important implications for applications of fluorescence activation in portable fluorescence patterning, bioimaging and super-resolution microscopy. Single molecule fluorescence microscopy provided unique insights into the MEF mechanism which were hidden by ensemble-averaged measurements, demonstrating that single molecule 'reading' is a valuable tool for characterizing particle-molecule interactions such as those responsible for the relative contributions of increased excitation and plasmophoric emission toward overall MEF. This work represents a step forward in the contemporary design of synergistic nano-molecular systems, and showcases the advantage of fusion between classic spectroscopic techniques and single molecule methods in terms of improved quantitative understanding of fluorophore-nanoparticle interactions, and how these interactions can be exploited to the fullest extent possible.

Labeling of Proteins by BODIPY-Quinone Methides Utilizing Anti-Kasha Photochemistry

A novel approach for the photolabeling of proteins by a BODIPY fluorophore is reported that is based on an anti-Kasha photochemical reaction from an upper singlet excited state (S_n) leading to the deamination of the BODIPY quinone methide precursor. On the other hand, the high photochemical stability of the dye upon excitation by visible light to S₁ allows for the selective fluorescence detection from the dye or dye-protein adduct, without concomitant bleaching or hydrolysis of the protein-dye adduct. Therefore, photolabeling and fluorescence monitoring can be uncoupled by using different excitation wavelengths. Combined theoretical and experimental studies by preparative irradiations, fluorescence, and laser flash photolysis fully disclose the photophysical properties of the dye and its anti-Kasha photochemical reactivity. The application of the dye was demonstrated on photolabeling of bovine serum albumin.

Rapid Excited-State Deactivation of BODIPY Derivatives by a Boron-Bound Catechol

The excited-state dynamics and energetics of a series of BODIPY-derived chromophores bound to a catechol at the boron position were investigated with a combination of static and time-resolved spectroscopy, electrochemistry, and density functional theory calculations. Compared with the difluoro-BODIPY-derived parent compounds, the addition of the catechol at the boron reduced the excited-state lifetime by three orders of magnitude. Deactivation of the excited state proceeded through an intermediate charge-transfer state accessed from the initial optically excited π* state in <1 ps. Despite differences in the structures of the BODIPY derivatives and absorption maxima that spanned the visible portion of the spectrum, all compounds exhibited the same, rapid, excited-state deactivation mechanism, suggesting the generality of the observed dynamics within this class of compounds.

Far-Red Photoactivatable BODIPYs for the Super-Resolution Imaging of Live Cells

The photoinduced disconnection of an oxazine heterocycle from a borondipyrromethene (BODIPY) chromophore activates bright far-red fluorescence. The high brightness of the product and the lack of autofluorescence in this spectral region allow its detection at the single-molecule level within the organelles of live cells. Indeed, these photoactivatable fluorophores localize in lysosomal compartments and remain covalently immobilized within these organelles. The suppression of diffusion allows the reiterative reconstruction of subdiffraction images and the visualization of the labeled organelles with excellent localization precision. Thus, the combination of photochemical, photophysical and structural properties designed into our fluorophores enable the visualization of live cells with a spatial resolution that is inaccessible to conventional fluorescence imaging.

A Photoactivatable Far-Red/Near-Infrared BODIPY To Monitor Cellular Dynamics in Vivo

A mechanism to photoactivate far-red/near-infrared fluorescence with infinite contrast and under mild visible illumination was designed around the photophysical properties of borondipyrromethene (BODIPY) dyes and the photochemical behavior of oxazine heterocycles. Specifically, the photoinduced and irreversible cleavage of an oxazine ring with a laser line at 405 nm extends the electronic conjugation of a BODIPY chromophore over a 3 H-indole auxochrome with a 2-(4-methoxyphenyl)ethenyl substituent in position 5. This structural transformation shifts bathochromically the main absorption band of the BODIPY component to allow the selective excitation of the photochemical product with a laser line of 633 nm and produce fluorescence between 600 and 850 nm. This combination of activation, excitation, and emission wavelengths permits the visualization of the cellular blastoderm of developing Drosophila melanogaster embryos with optimal contrast and essentially no autofluorescence from the biological specimen. Furthermore, the sequential acquisition of images, after the photoactivation event, enables the tracking of individual cells within the embryos in real time. Thus, our structural design and operating principles for the photoactivation of far-red/near-infrared fluorescence can evolve into invaluable probes to monitor cellular dynamics in vivo.

Spectral and physicochemical properties of difluoroboranyls containing N,N-dimethylamino group studied by solvatochromic methods

The solvatochromism of the dyes was analyzed based on the four-parameter scale including: polarizability (SP), dipolarity (SdP), acidity (SA) and basicity (SB) parameters by method proposed by Catalán. The change of solvent to more polar caused the red shift of absorption and fluorescence band position. The frequency shifts manifest the change in the dipole moment upon excitation. The ground-state dipole moment of the difluoroboranyls was estimated based on changes in molecular polarization with temperature. Moreover, the Stokes shifts were used to calculate the excited state dipole moments of the dyes. For the calculation, the ground-state dipole moments and Onsager cavity radius were also determined theoretically using density functional theory (DFT). The experimentally determined excited-state dipole moments for the compounds are higher than the corresponding ground-state values. The increase in the dipole moment is described in terms of the nature of the excited state.

Photochemical Barcodes

A photochemical strategy to encode fluorescence signals in vivo with spatial control was designed around the unique properties of a photoactivatable borondipyrromethene (BODIPY). The photoinduced disconnection of two oxazines, flanking a single BODIPY, in two consecutive steps produces a mixture of three emissive molecules with resolved fluorescence inside polymer beads. The relative amounts and emission intensities of the three fluorophores can be regulated precisely in each bead by adjusting the dose of activating photons to mark individual particles with distinct codes of fluorescence signals. The visible wavelengths and mild illumination sufficient to induce these transformations permit the photochemical barcoding of beads also in living nematodes. Different regions of the same animal can be labeled with distinct barcodes to allow the monitoring of their dynamics for long times with no toxic effects. Thus, our photochemical strategy for the generation of fluorescence barcodes can produce multiple and distinguishable labels in the same biological sample to enable the spatiotemporal tracking of, otherwise indistinguishable, targets.

N-BODIPYs Come into Play: Smart Dyes for Photonic Materials

N-BODIPYs (diaminoboron dipyrromethenes) are unveiled as a new family of BODIPY dyes with huge technological potential. Synthetic access to these systems has been gained through a judicious design focused on stabilizing the involved diaminoboron chelate. Once stabilized, the obtained N-BODIPYs retain the effective photophysical behavior exhibited by other boron-substituted BODIPYs, such as O-BODIPYs. However, key bonding features of nitrogen compared to those of oxygen (enhanced bond valence and different bond directionality) open up new possibilities for functionalizing BODIPYs, allowing an increase in the number of pendant moieties (from two in O-BODIPYs, up to four in N-BODIPYs) near the chromophore and, therefore, greater control of the photophysics. As a proof of concept, the following findings are discussed: (1) the low-cost and straightforward synthesis of a selected series of N-BODIPYs; (2) their outstanding photophysical properties compared to those of related effective dyes (excellent emission signatures, including fluorescence in the solid state; notable lasing capacities in the liquid phase and when doped into polymers; improved laser performance compared to the parent F-BODIPYs); (3) the versatility of the diaminoboron moiety in allowing the generation of multifunctionalized BODIPYs, permitting access to both symmetric and asymmetric dyes; (4) the capability of such versatility to finely modulate the dye photophysics towards different photonic applications, from lasing to chemosensing.

Thermally-Activated, Delayed Fluorescence in O,B,O- and N,B,O-Strapped Boron Dipyrromethene Derivatives

A small series of boron dipyrromethene (BODIPY) dyes has been synthesized whereby the boron atom is constrained in a five-membered ring formed from either o-dihydroxypyridine or o-aminophenol. In the latter case, the amino group has been converted into the corresponding amide derivative so as to curtail the possibility for light-induced charge transfer from strap to BODIPY. These compounds are weakly emissive in fluid solution but cleavage of the strap, by treatment with a photoacid generator, restores strong fluorescence. Surprisingly, the same compounds remain weakly fluorescent in a rigid glass at 80 K where light-induced charge transfer is most unlikely. In fluid solution, the fluorescence quantum yield increases with increasing temperature due to a thermally activated step but does not correlate with the thermodynamics for intramolecular charge transfer. It is proposed that the strap causes rupture of the potential energy surface for the excited state, creating traps that provide new routes by which the wave packet can return to the ground state. Access to the trap from the excited state is reversible, leading to the delayed emission. Analysis of the temperature dependent emission intensities allows estimation of the kinetic parameters associated with entering and leaving the trap.

Modulation of ICT probability in bi(polyarene)-based O-BODIPYs: towards the development of low-cost bright arene-BODIPY dyads

Bi(polyarene)-based O-BODIPYs, a valuable and tunable scaffold for photonics.

A Photoswitchable Fluorophore for the Real-Time Monitoring of Dynamic Events in Living Organisms

This study reports the synthesis of a photoactivatable fluorophore with optimal photochemical and photophysical properties for the real-time tracking of motion in vivo. The photoactivation mechanism designed into this particular compound permits the conversion of an emissive reactant into an emissive product with resolved fluorescence, under mild illumination conditions that are impossible to replicate with conventional switching schemes based on bleaching. Indeed, the supramolecular delivery of these photoswitchable probes into the cellular blastoderm of Drosophila melanogaster embryos allows the real-time visualization of translocating molecules with no detrimental effects on the developing organisms. Thus, this innovative mechanism for fluorescence photoactivation can evolve into a general chemical tool to monitor dynamic processes in living biological specimens.

Strategy to enhance solid-state fluorescence and aggregation-induced emission enhancement effect in pyrimidine boron complexes

The synthesis and the solution/solid-state fluorescence properties of pyrimidine-based monoboron complexes differing in terms of the substituents [either two fluorine atoms (BF2 complex) or two phenyl groups (BPh2 complex)] on the boron atom are reported herein. Unrestricted C-Ar intramolecular rotation in the non-, trifluoromethyl-, and cyano-substituted derivatives resulted in negligible fluorescence in solution. On the other hand, methoxy- and dimethylamino-substituted analogues caused the restriction of the C-Ar intramolecular rotation and consequently resulted in relatively strong fluorescence in solution. The non-, trifluoromethyl-, and cyano-substituted derivatives showed a pronounced aggregation-induced emission enhancement effect. Dimethylamino-substituted derivatives exhibited solvatochromism in the fluorescence spectra. Substitution with BPh2 effectively enhanced the fluorescence quantum yield compared to the corresponding BF2 complexes in the solid-state.