Enantioselective Cascade Formal Reductive Insertion of Allylic Alcohols into the C(O)–C Bond of 1,3-Diketones: Ready Access to Synthetically Valuable 3-Alkylpentanol Units

Iron- and Organo-Catalyzed Borrowing Hydrogen for the Stereoselective Construction of Tetrahydropyrans

Stereocontrolled oxa-Michael additions are challenging, given the high reversibility of the process, which ultimately leads to racemization of the newly formed stereocenters. When iron-catalyzed borrowing hydrogen from allylic alcohols was combined with a stereocontrolled organocatalytic oxa-Michael addition, a wide array of chiral tetrahydropyrans were efficiently prepared. The reaction could be performed in a diastereoselective manner from pre-existing stereocenters or enantioselectively from achiral substrates. The key to success was the reactivity of the iron complex, which was selective for allylic alcohol dehydrogenation and irreversibly led the reaction to the final product.

Functional group tolerant hydrogen borrowing C-alkylation

Hydrogen borrowing is an attractive and sustainable strategy for carbon-carbon bond formation that enables alcohols to be used as alkylating reagents in place of alkyl halides. However, despite intensive efforts, limited functional group tolerance is observed in this methodology, which we hypothesize is due to the high temperatures and harsh basic conditions often employed. Here we demonstrate that room temperature and functional group tolerant hydrogen borrowing can be achieved with a simple iridium catalyst in the presence of substoichiometric base without an excess of reagents. Achieving high yields necessitates the application of anaerobic conditions to counteract the oxygen sensitivity of the catalytic iridium hydride intermediate, which otherwise leads to catalyst degradation. Substrates containing heteroatoms capable of complexing the catalyst exhibit limited room temperature reactivity, but the application of moderately higher temperatures enables extension to a broad range of medicinally relevant nitrogen rich heterocycles. These newly developed conditions allow alcohols possessing functional groups that were previously incompatible with hydrogen borrowing reactions to be employed.

Enantioconvergent transformations of secondary alcohols through borrowing hydrogen catalysis

Direct substitution of readily available alcohols is recognized as a key research area in green chemical synthesis. Starting from simple racemic secondary alcohols, the achievement of catalytic enantioconvergent transformations of the substrates will be highly desirable for efficient access to valuable enantiopure compounds. To accomplish such attractive yet challenging transformations, the strategy of the enantioconvergent borrowing hydrogen methodology has proven to be uniquely effective and versatile. This review aims to provide an overview of the impressive progress made on this topic of research that has only thrived in the past decade. In particular, the conversion of racemic secondary alcohols to enantioenriched chiral amines, N-heterocycles, higher-order alcohols and ketones will be discussed in detail.

Catalysis Driven Six-Step Synthesis of Apratoxin A Key Polyketide Fragment

Apratoxin A is a potent anticancer natural product whose key polyketide fragment constitutes a considerable challenge for organic synthesis, with five prior syntheses requiring 12 to 20 steps for its preparation. By combining different redox-economical catalytic stereoselective transformations, the key polyketide fragment could be rapidly prepared. Followed by a site-selective protection of the diol, this strategy enables the preparation of the apratoxin A fragment in only six steps, representing the shortest route to this polyketide.

Copper–cobalt coordination polymers and catalytic applications on borrowing hydrogen reactions

A porous copper–cobalt polymer was synthesized and achieved applications for the N-alkylation of sulfonamides with alcohols, and carboxamides with alcohols.

Organocatalytic Asymmetric Cascade Michael-acyl Transfer Reaction between 2-Fluoro-1,3-diketones and Unsaturated Thiazolones: Access to Fluorinated 4-Acyloxy Thiazoles

Quinine derived bifunctional urea catalyzed cascade Michael-acyl transfer reaction of 5-alkenyl thiazolones and monofluorinated β-diketones has been developed. The fluorine containing 4-acyloxy thiazoles were synthesized in high yields and good diastereo-and excellent enantioselectivities. Synthetic transformations, including synthesis of 4-hydroxy thiazoles, have been demonstrated.

Tandem Catalytic Indolization/Enantioconvergent Substitution of Alcohols by Borrowing Hydrogen to Access Tricyclic Indoles

An efficient tandem catalysis method is achieved for the direct conversion of alcohol-containing alkynyl anilines to valuable chiral 2,3-fused tricyclic indoles. This method relies on a tandem indolization followed by enantioconvergent substitution of alcohols via borrowing hydrogen to construct two rings in one step, enabled by relay and cooperative catalysis of a chiral iridium complex with a chiral phosphoric acid. Highly diastereoselective transformations of the tricyclic indole products also provide efficient access to a diverse array of complex polycyclic indoline compounds.

(Cyclopentadienone)iron Complexes: Synthesis, Mechanism and Applications in Organic Synthesis

(Cyclopentadienone)iron tricarbonyl complexes are catalytically active, inexpensive, easily accessible and air-stable that are extensively studied as an active pre-catalyst in homogeneous catalysis. Its versatile catalytic activity arises exclusively due to the presence of a non-innocent ligand, which can trigger its unique redox properties effectively. These complexes have been employed widely in (transfer)hydrogenation (e. g., reduction of polar multiple bonds, Oppenauer-type oxidation of alcohols), C-C and C-N bond formation (e. g., reductive aminations, α-alkylation of ketones) and other synthetic transformations. In this review, we discuss the remarkable advancement of its various synthetic applications along with synthesis and mechanistic studies, until February 2021.

Control of Absolute Stereochemistry in Transition-Metal-Catalysed Hydrogen-Borrowing Reactions

Hydrogen-borrowing catalysis represents a powerful method for the alkylation of amine or enolate nucleophiles with non-activated alcohols. This approach relies upon a catalyst that can mediate a strategic series of redox events, enabling the formation of C-C and C-N bonds and producing water as the sole by-product. In the majority of cases these reactions have been employed to target achiral or racemic products. In contrast, the focus of this Minireview is upon hydrogen-borrowing-catalysed reactions in which the absolute stereochemical outcome of the process can be controlled. Asymmetric hydrogen-borrowing catalysis is rapidly emerging as a powerful approach for the synthesis of enantioenriched amine and carbonyl containing products and examples involving both C-N and C-C bond formation are presented. A variety of different approaches are discussed including use of chiral auxiliaries, asymmetric catalysis and enantiospecific processes.

Photoredox Reaction of 2-Mercaptothiazolinium Salts with Silyl Enol Ethers

A method for the generation of free radicals from thiazolinium salts upon photocatalytic reduction is described. The thiazolinium salts are generated by treatment with methyl triflate of 2-mercaptothiazolines, which can be readily obtained from alkyl bromides and tosylates via a nucleophilic substitution reaction or by hydrothiolation of alkenes. Silyl enol ethers were used to trap the radicals, furnishing ketones after successive single-electron oxidation and elimination of the silyl cation.

Synthesis and Catalytic Application of Knölker-Type Iron Complexes with a Novel Asymmetric Cyclopentadienone Ligand Design

Asymmetric catalysis is an essential tool in modern chemistry, but increasing environmental concerns demand the development of new catalysts based on cheap, abundant, and less toxic iron. As a result, Knölker-type catalysts have emerged as a promising class of iron catalysts for various chemical transformations, notably the hydrogenation of carbonyls and imines, while asymmetric versions are still under exploration to achieve optimal enantio-selectivities. In this work, we report a novel asymmetric design of a Knölker-type catalyst, in which the C2-rotational symmetric cyclopentadienone ligand possesses chiral substituents on the 2- and 5-positions near the active site. Four examples of the highly modular catalyst design were synthesized via standard organic procedures, and their structures were confirmed with NMR, IR, MS, and polarimetry analysis. Density functional theory (DFT) calculations were conducted to elucidate the spatial conformation of the catalysts, and therewith to rationalize the influence of structural alterations. Transfer- and H2-mediated hydrogenations were successfully established, leading to appreciable enantiomeric excesses (ee) values up to 70%. Amongst all reported Knölker-type catalysts, our catalyst design achieves one of the highest ee values for hydrogenation of acetophenone and related compounds.

Asymmetric Retro-Claisen Reaction by Synergistic Chiral Primary Amine/Palladium Catalysis

We described herein a chiral primary amine/palladium catalyzed asymmetric retro-Claisen reaction of β-diketones with salicylic carbonates. A series of chiral α-alkylated ketones and macrolides were obtained with good yields and excellent enantioselectivities upon a sequence of decarboxylative benzylation, retro-Claisen cleavage, and enamine protonation. This strategy features broad substrate scope, mild conditions, as well as high atom economy with salicylic carbonates as the o-quinone methide precursors.

Iron-Catalyzed Borrowing Hydrogen C-Alkylation of Oxindoles with Alcohols

A general and efficient iron-catalyzed C-alkylation of oxindoles has been developed. This borrowing hydrogen approach employing a (cyclopentadienone)iron carbonyl complex (2 mol %) exhibited a broad reaction scope, allowing benzylic and simple primary and secondary aliphatic alcohols to be employed as alkylating agents. A variety of oxindoles underwent selective mono-C3-alkylation in good-to-excellent isolated yields (28 examples, 50-92 % yield, 79 % average yield).

Recent advances in homogeneous borrowing hydrogen catalysis using earth-abundant first row transition metals

The review highlights the recent advances (2013-present) in the use of earth-abundant first row transition metals in homogeneous borrowing hydrogen catalysis. The utility of catalysts based on Mn, Fe, Co, Ni and Cu to promote a diverse array of important C-C and C-N bond forming reactions is described, including discussion on reaction mechanisms, scope and limitations, and future challenges in this burgeoning area of sustainable catalysis.

Catalytic enantioselective OFF ↔ ON activation processes initiated by hydrogen transfer: concepts and challenges

Hydrogen transfer initiated processes are eco-compatible transformations allowing the reversible OFF ↔ ON activation of otherwise unreactive substrates. The minimization of stoichiometric waste as well as the unique activation modes provided by these transformations make them key players for a greener future for organic synthesis. Long limited to catalytic reactions that form racemic products, considerable progress on the development of strategies for controlling diastereo- and enantioselectivity has been made in the last decade. The aim of this review is to present the different strategies that enable enantioselective transformations of this type and to highlight how they can be used to construct key synthetic building blocks in fewer operations with less waste generation.

Domino construction of a bullataketal core via double bond cleavage in activated dihydrofurans

A new rapid approach to structurally challenging and biologically relevant methanobenzodioxepines was developed via a Brønsted acid-triggered domino transformation of 3-carbonyl-4,5-dihydrofurans, substituted with MOM-protected o-hydroxyaryls at the C4 atom.

Combinations of Aminocatalysts and Metal Catalysts: A Powerful Cooperative Approach in Selective Organic Synthesis

The cooperation and interplay between organic and metal catalyst systems is of utmost importance in nature and chemical synthesis. Here innovative and selective cooperative catalyst systems can be designed by combining two catalysts that complement rather than inhibit one another. This refined strategy can permit chemical transformations unmanageable by either of the catalysts alone. This review summarizes innovations and developments in selective organic synthesis that have used cooperative dual catalysis by combining simple aminocatalysts with metal catalysts. Considerable efforts have been devoted to this fruitful field. This emerging area employs the different activation modes of amine and metal catalysts as a platform to address challenging reactions. Here, aminocatalysis (e.g., enamine activation catalysis, iminium activation catalysis, single occupied molecular orbital (SOMO) activation catalysis, and photoredox activation catalysis) is employed to activate unreactive carbonyl substrates. The transition metal catalyst complements by activating a variety of substrates through a range of interactions (e.g., electrophilic π-allyl complex formation, Lewis acid activation, allenylidene complex formation, photoredox activation, C-H activation, etc.), and thereby novel concepts within catalysis are created. The inclusion of heterogeneous catalysis strategies allows for "green" chemistry development, catalyst recyclability, and the more eco-friendly synthesis of valuable compounds.

A Step into an eco-Compatible Future: Iron- and Cobalt-catalyzed Borrowing Hydrogen Transformation

Living on borrowed hydrogen: Recent developments in iron- and cobalt-catalyzed borrowing hydrogen have shown that economically reliable catalysts can be used in this type of waste-free reactions. By using well-defined inexpensive catalysts, known reactions can now be run efficiently without the necessary use of noble metals; however, in addition new types of reactivity can also be discovered.

Sequential Michael addition/retro-Claisen condensation of aromatic β-diketones with α,β-unsaturated esters: an approach to obtain 1,5-ketoesters

A K₂CO₃-catalyzed one-pot protocol involving sequential C–C bond formation and cleavage of aromatic β-diketones with α,β-unsaturated esters is developed to obtain 1,5-ketoesters, proceeding smoothly under mild conditions in up to 98% isolated yield.

Hydrogenation and dehydrogenation iron pincer catalysts capable of metal-ligand cooperation by aromatization/dearomatization

The substitution of expensive and potentially toxic noble-metal catalysts by cheap, abundant, environmentally benign, and less toxic metals is highly desirable and in line with green chemistry guidelines. We have recently discovered a new type of metal-ligand cooperation, which is based on the reversible dearomatization/aromatization of different heteroaromatic ligand cores caused by deprotonation/protonation of the ligand. More specifically, we have studied complexes of various transition metals (Ru, Fe, Co, Rh, Ir, Ni, Pd, Pt, and Re) bearing pyridine- and bipyridine-based PNP and PNN pincer ligands, which have slightly acidic methylene protons. In addition, we have discovered long-range metal-ligand cooperation in acridine-based pincer ligands, where the cooperation takes place at the electrophilic C-9 position of the acridine moiety leading to dearomatization of its middle ring. This type of metal-ligand cooperation was used for the activation of chemical bonds, including H-H, C-H (sp(2) and sp(3)), O-H, N-H, and B-H bonds. This unusual reactivity likely takes place in various catalytic hydrogenation, dehydrogenation, and related reactions. In this Account, we summarize our studies on novel bifunctional iron PNP and PNN pincer complexes, which were designed on the basis of their ruthenium congeners. Iron PNP pincer complexes serve as efficient (pre)catalysts for hydrogenation and dehydrogenation reactions under remarkably mild conditions. Their catalytic applications include atom-efficient and industrially important hydrogenation reactions of ketones, aldehydes, and esters to the corresponding alcohols. Moreover, they catalyze the hydrogenation of carbon dioxide to sodium formate in the presence of sodium hydroxide, the selective decomposition of formic acid to carbon dioxide and hydrogen, and the E-selective semihydrogenation of alkynes to give E-alkenes. These catalysts feature, compared to other iron-based catalysts, very high catalytic activities which in some cases can even exceed those of state-of-the-art noble-metal catalysts. For the iron PNP systems, we describe the synthesis of the pyridine- and acridine-based PNP iron complexes and their performances and limitations in catalytic reactions, and we present studies on their reactivity with relevance to their catalytic mechanisms. In the case of the bipyridine-based PNN system, we summarize the synthesis of new complexes and describe studies on the noninnocence of the methylene position, which can be reversibly deprotonated, as well as on the noninnocence of the bipyridine unit. Overall, this Account underlines that the combination of cheap and abundant iron with ligands that are capable of metal-ligand cooperation can result in the development of novel, versatile, and efficient catalysts for atom-efficient catalytic reactions.