Catalytic asymmetric intermolecular bromoesterification of unfunctionalized olefins

Surmounting Byproduct Inhibition in an Intermolecular Catalytic Asymmetric Alkene Bromoesterification Reaction as Revealed by Kinetic Profiling

Kinetic profiling has shown that a (DHQD)₂PHAL-catalyzed intermolecular asymmetric alkene bromoesterification reaction is inhibited by primary amides, imides, hydantoins, and secondary cyclic amides, which are byproducts of common stoichiometric bromenium ion sources. Two approaches to resolving the inhibition are presented, enabling the (DHQD)₂PHAL loading to be dropped from 10 to 1 mol % while maintaining high bromoester conversions in 8 h or less. Iterative post-reaction recrystallizations enabled a homochiral bromonaphthoate ester to be synthesized using only 1 mol % (DHQD)₂PHAL.

Kinetic Resolution of Sulfinamides via Asymmetric N-Allylic Alkylation

An efficient kinetic resolution of sulfinamides via an asymmetric N-allylic alkylation reaction was realized using hydroquinine as a catalyst under mild conditions. The kinetic resolution of a range of Morita-Baylis-Hillman adducts and N-aryl tert-butylsulfinamides was highly effective. In addition, the synthetic utility of the protocol was demonstrated by a scaled-up reaction. Density functional theory calculations provide convincing evidence for the interpretation of stereoselection.

Solvent and catalyst-free bromofunctionalization of olefins using a mechanochemical approach

Bromofunctionalizations of olefins are an important class of chemical transformations. N-Bromoimide reagents are commonly used in these reactions but catalysts and chlorinated solvents are often employed to achieve a reasonable reaction rate. In this report, we present a solvent and catalyst-free bromofunctionalization of olefins using mechanical force.

Efficient bromofunctionalization of olefins including bromolactonization, bromocycloetherification, and intermolecular bromoesterification were achieved under solvent and catalyst-free conditions using a mechanochemical approach.

Catalytic enantioselective bromohydroxylation of cinnamyl alcohols

This work describes an effective enantioselective bromohydroxylation of cinnamyl alcohols with (DHQD)₂PHAL as the catalyst and H₂O as the nucleophile, providing a variety of corresponding optically active bromohydrins with up to 95% ee.

Optically active bromohydrins are obtained with up to 95% ee via asymmetric bromohydroxylation of cinnamyl alcohols with H₂O as nucleophile.

Ritter-enabled catalytic asymmetric chloroamidation of olefins

Intermolecular asymmetric haloamination reactions are challenging due to the inherently high halenium affinity (HalA) of the nitrogen atom, which often leads to N-halogenated products as a kinetic trap. To circumvent this issue, acetonitrile, possessing a low HalA, was used as the nucleophile in the catalytic asymmetric Ritter-type chloroamidation of allyl-amides. This method is compatible with Z and E alkenes with both alkyl and aromatic substitution. Mild acidic workup reveals the 1,2-chloroamide products with enantiomeric excess greater than 95% for many examples. We also report the successful use of the sulfonamide chlorenium reagent dichloramine-T in this chlorenium-initiated catalytic asymmetric Ritter-type reaction. Facile modifications lead to chiral imidazoline, guanidine, and orthogonally protected 1,2,3 chiral tri-amines.

Intermolecular haloamination reactions are challenging due to the high halenium affinity of the nitrogen atom. This is circumvented by using acetonitrile as an attenuated nucleophile, resulting in an enantioselective halo-Ritter reaction.

Zwitterion-Catalyzed Intermolecular Bromoesterifications

Intermolecular haloesterification is an important class of transformations. The resulting products are valuable building blocks. However, it is often necessary to use super-stoichiometric amount of acid in order to compensate the low reactivity. Herein, we report a zwitterion-catalyzed intermolecular bromoesterification using acid and olefin in an equimolar ratio. Mechanistic study revealed that the charge pair in the zwitterion works synergistically in activating both NBS and carboxylic acid.

Mechanistic Insights into the Origin of Stereoselectivity in an Asymmetric Chlorolactonization Catalyzed by (DHQD)2PHAL

Electrophilic halofunctionalization reactions have undergone a resurgence sparked by recent discoveries in the field of catalytic asymmetric halocyclizations. To build mechanistic understanding of these asymmetric transformations, a toolbox of analytical methods has been deployed, addressing the roles of catalyst, electrophile (halenium donor), and nucleophile in determining rates and stereopreferences. The test reaction, (DHQD)₂PHAL-catalyzed chlorocyclization of 4-arylpent-4-enoic acid with 1,3-dichloro-5,5-dimethylhydantoin (DCDMH), is revealed to be first order in catalyst and chlorenium ion donor and zero order in alkenoic acid substrate under synthetically relevant conditions. The simplest interpretation is that rapid substrate-catalyst binding precedes rate-limiting chlorenium attack, controlling the face selectivity of both chlorine attack and lactone closure. ROESY and DFT studies, aided by crystal structures of carboxylic acids bound by the catalyst, point to a plausible resting state of the catalyst-substrate complex predisposed for asymmetric chlorolactonization. As revealed by our earlier labeling studies, these findings suggest modes of binding in the (DHQD)₂PHAL chiral pocket that explain the system's remarkable control over rate- and enantioselection-determining events. Though a comprehensive modeling analysis is beyond the scope of the present work, quantum chemical analysis of the fragments' interactions and candidate reaction paths point to a one-step concerted process, with the nucleophile playing a critical role in activating the olefin for concomitant electrophilic attack.

Atroposelective Catalytic Asymmetric Allylic Alkylation Reaction for Axially Chiral Anilides with Achiral Morita-Baylis-Hillman Carbonates

A highly efficient method to access axially chiral anilides through asymmetric allylic alkylation reaction with achiral Morita-Baylis-Hillman carbonates by using a biscinchona alkaloid catalyst was reported. Through the atroposelective approach, a broad range of axially chiral anilide products with different acyl groups, such as substituted phenyl, naphthyl, alkyl, enyl, styryl, and benzyl, were generated with very good yields, moderate to excellent cis: trans ratios, and good to excellent enantioselectivities. The reaction can be scaled up, and the synthetic utility of axially chiral anilides was proved by transformations. Moreover, the linear free energy relationship analysis was introduced to investigate the reaction.

Synthesis of Enantioenriched Bromohydrins via Divergent Reactions of Racemic Intermediates from Anchimeric Oxygen Borrowing

We report a chiral phosphoric acid catalyzed bromocyclization/regiodivergent reaction of racemic intermediates sequence, which is enabled by anchimeric oxygen borrowing. Different types of alkenes are applicable, and both enantiomers of the bromohydrin products were obtained in generally excellent yields and enantioselectivities. In addition, an example of enantioconvergent synthesis from the two isomeric products is presented.

Absolute and relative facial selectivities in organocatalytic asymmetric chlorocyclization reactions

For four related 1,1-disubstituted olefins, (DHQD)₂PHAL-catalyzed asymmetric chlorocyclization delivers Cl⁺ uniformly to one π face, but cyclizes with strong but differing net syn vs. anti addition.

Though (DHQD)₂PHAL-catalyzed chlorocyclizations of 1,1-disubstituted olefins show useful (and in some cases, reversible) asymmetric induction, stereochemically complete descriptions of these alkene additions have remained largely unknown. Herein, based on a combination of NMR, derivative, isotope labeling, and computational studies, we present detailed stereochemical analyses of chlorocyclizations of nucleophile-tethered 1,1-disubstituted styryl systems. The selectivities of the two asymmetric bond-forming processes, namely electrophilic chlorine attack and nucleophilic ring closure, are thus mapped out independently. Under the established optimal conditions, four related chlorocyclizations were subjected to this analysis. All showed a strong preference for Cl⁺ delivery from the same face of the alkene. However, depending on reaction conditions and substrate identity (carboxylic acid, amide or carbamate), the internal nucleophiles may close with a strong net preference for either syn or anti addition relative to the Cl atom. Studies of both uncatalyzed and (DHQD)₂PHAL-catalyzed processes place new boundary conditions on the role of the catalyst in these reactions.

Catalytic enantioselective bromohydroxylation of aryl olefins with flexible functionalities

A highly enantioselective bromohydroxylation of aryl olefins with flexible functionalities has been achieved with (DHQD)₂PHAL as a catalyst and H₂O as a nucleophile, giving a variety of optically active bromohydrins with up to 98% ee.

A Metal-Free Protocol for Aminofunctionalization of Olefins Using TsNBr2

N,N-Dibromo-p-toluene sulfonamide (TsNBr2) has been found to be an effective reagent for various aminofunctionalization reactions. This reagent behaves both as an electrophilic bromine source as well as amine to react with olefins under different conditions to yield aminoether, imidazoline, diamine and amino bromine. The reaction proceeds rapidly under mild conditions with high regioselectivity. Olefins react with TsNBr2 in moist THF to form δ-amino ether at room temperature. Treatment of TsNBr2 with olefin in MeCN at room temperature produced imidazoline in high yield. Further modification of the reaction condition resulted in the development of a one-step procedure for the synthesis of N-acetyl,N'-tosyl diamine derivatives directly from olefin. When the olefin was treated with 2.4 mol equiv of TsNBr2 in the presence of K2CO3, N,N'-ditosyl diamine derivative was obtained in moderate yield. Instantaneous formation of aminobromine was observed when an olefin was treated with the reagent in dry CH2Cl2 at room temperature.

Use of Bromine and Bromo-Organic Compounds in Organic Synthesis

Bromination is one of the most important transformations in organic synthesis and can be carried out using bromine and many other bromo compounds. Use of molecular bromine in organic synthesis is well-known. However, due to the hazardous nature of bromine, enormous growth has been witnessed in the past several decades for the development of solid bromine carriers. This review outlines the use of bromine and different bromo-organic compounds in organic synthesis. The applications of bromine, a total of 107 bromo-organic compounds, 11 other brominating agents, and a few natural bromine sources were incorporated. The scope of these reagents for various organic transformations such as bromination, cohalogenation, oxidation, cyclization, ring-opening reactions, substitution, rearrangement, hydrolysis, catalysis, etc. has been described briefly to highlight important aspects of the bromo-organic compounds in organic synthesis.

Phosphine Oxide-Sc(OTf)3 Catalyzed Highly Regio- and Enantioselective Bromoaminocyclization of (E)-Cinnamyl Tosylcarbamates. An Approach to a Class of Synthetically Versatile Functionalized Molecules

A highly regio- and enantioselective bromoaminocyclization of (E)-cinnamyl tosylcarbamates catalyzed by a chiral phosphine oxide-Sc(OTf)3 complex is described. A wide variety of optically active aryl 5-bromo-1,3-oxazinan-2-ones can be obtained with high yield and enantioselectivity.

Chiral Phosphine Oxide-Sc(OTf)3 Complex Catalyzed Enantioselective Bromoaminocyclization of 2-Benzofuranylmethyl N-Tosylcarbamates. Approach to a Novel Class of Optically Active Spiro Compounds

An efficient enantioselective bromoaminocyclization of 2-benzofuranylmethyl N-tosylcarbamates catalyzed by a chiral phosphine oxide-Sc(OTf)(3) complex is described. A wide variety of optically active spiro benzofuran oxazolidinones can be obtained with high enantioselectivities.

Highly Stereoselective Intermolecular Haloetherification and Haloesterification of Allyl Amides

An organocatalytic and highly regio-, diastereo-, and enantioselective intermolecular haloetherification and haloesterification reaction of allyl amides is reported. A variety of alkene substituents and substitution patterns are compatible with this chemistry. Notably, electronically unbiased alkene substrates exhibit exquisite regio- and diastereoselectivity for the title transformation. We also demonstrate that the same catalytic system can be used in both chlorination and bromination reactions of allyl amides with a variety of nucleophiles with little or no modification.

Enantioselective 6-exo-Bromoaminocyclization of Homoallylic N-Tosylcarbamates Catalyzed by a Novel Monophosphine-Sc(OTf)3 Complex

A highly enantioselective 6-exo-bromoaminocyclization of (E)-homoallylic N-tosylcarbamates catalyzed by a novel monophosphine-Sc(OTf)3 complex is described, giving a wide variety of optically active oxazinanones with high enantioselectivities.

Catalytic enantioselective bromoamination of allylic alcohols

An enantioselective bromoamination of allylic alcohols has been developed for the first time using a newly designed cinchona-derived thiourea as the catalyst and N,N-dibromo-4-nitrobenzenesulfonamide as a bromine and amine source.

Enantioselective 6-endo bromoaminocyclization of 2,4-dienyl N-tosylcarbamates catalyzed by a chiral phosphine oxide-Sc(OTf)3 complex. A dramatic additive effect

An effective enantioselective 6-endo bromoaminocyclization of 2,4-dienyl N-tosylcarbamates catalyzed by a chiral phosphine oxide-Sc(OTf)3 complex is described. A wide variety of optically active 5-bromo-1,3-oxazinan-2-ones containing various functional groups can be obtained in 61-91% yields and 92-99% ees. An additive, such as NaCl, has been found to be crucial for the reaction process.

Iron(II)-catalyzed asymmetric intramolecular olefin aminochlorination using chloride ion

An iron-catalyzed enantioselective and diastereoselective intramolecular olefin aminochlorination reaction is reported (ee up to 92%, dr up to 15 : 1). In this reaction, a functionalized hydroxylamine and chloride ion are utilized as nitrogen and chlorine sources, respectively. This new method tolerates a range of synthetically valuable internal olefins that are all incompatible with existing asymmetric olefin aminochlorination methods.

Bromination of olefins with HBr and DMSO

A simple and inexpensive methodology is reported for the conversion of alkenes to 1,2-dibromo alkanes via oxidative bromination using HBr paired with dimethyl sulfoxide, which serves as the oxidant as well as cosolvent. The substrate scope includes 21 olefins brominated in good to excellent yields. Three of six styrene derivatives yielded bromohydrins under the reaction conditions.

Enantioselective bromocyclization of allylic amides catalyzed by BINAP derivatives

A highly enantioselective bromocyclization of allylic amides with N-bromosuccinimide (NBS) was developed with DTBM-BINAP as a catalyst, affording chiral oxazolines with a tetrasubstituted carbon center in high yield with up to 99% ee. By utilizing the bromo substituent as a handle, the obtained compounds were converted to synthetically useful chiral building blocks.

3-Pyrrolyl-oxindoles as efficient nucleophiles for organocatalytic asymmetric synthesis of structurally diverse 3,3′-disubstituted oxindole derivatives

An organocatalytic asymmetric reaction of 3-pyrrolyl-oxindoles to nitroalkenes was developed to afford a range of 3-pyrrolyl-3,3′-disubstituted oxindoles in excellent yields.