Renewable Monomer Feedstocks via Olefin Metathesis: Fundamental Mechanistic Studies of Methyl Oleate Ethenolysis with the First-Generation Grubbs Catalyst

Sniffing Out the Sustainable Future: The Renewability Revolution in Fragrance Chemistry

In this review, the impact of the transition from today's resource-wasting petrochemical economy towards a 100/100 renewable and biodegradable future is discussed with respect to the fragrance families: "citrus", "green", "fruity", "floral", "floriental", "oriental", "woody", "chypre" and "fougère". After benchmark data on ingredients usage, definitions on biodegradation and sustainability are given. Celebrating the 150th anniversary of synthetic vanillin, its historic synthesis from renewable starting materials serves as introduction. In the grand scheme of things, citrus scents upcycled from the beverages industry, are already an ideal case for 100/100 with new opportunities for artificial essential oils. In the fruity domain, transparent and lactonic ingredients are available in a sustainable manner. However, in the domain of green odorants, there is a lack of green chemistry for important key materials. In the floral family, renewability is more critical than biodegradability, but cost is an issue. Thanks to Ambrox and maltol, florientals and orientals will persist, while woody notes severely lack an Iso E Super replacer. In the chypre genre, patchouli became the new moss, but more musks are increasingly in demand. With their high percentage of linalool and dihydromyrcenol, the construction of fougères could well become a precedent for other families, despite challenges in vetiver and salicylates. Still, the challenges exemplified here create immense opportunities for new perfumery materials.

Automated de Novo Design of Olefin Metathesis Catalysts: Computational and Experimental Analysis of a Simple Thermodynamic Design Criterion

Methods for computational de novo design of inorganic molecules have paved the way for automated design of homogeneous catalysts. Such studies have so far relied on correlation-based prediction models as fitness functions (figures of merit), but the soundness of these approaches has yet to be tested by experimental verification of de novo-designed catalysts. Here, a previously developed criterion for the optimization of dative ligands L in ruthenium-based olefin metathesis catalysts RuCl2(L)(L')(═CHAr), where Ar is an aryl group and L' is a phosphine ligand dissociating to activate the catalyst, was used in de novo design experiments. These experiments predicted catalysts bearing an N-heterocyclic carbene (L = 9) substituted by two N-bound mesityls and two tert-butyl groups at the imidazolidin-2-ylidene backbone to be promising. Whereas the phosphine-stabilized precursor assumed by the prediction model could not be made, a pyridine-stabilized ruthenium alkylidene complex (17) bearing carbene 9 was less active than a known leading pyridine-stabilized Grubbs-type catalyst (18, L = H2IMes). A density functional theory-based analysis showed that the unsubstituted metallacyclobutane (MCB) intermediate generated in the presence of ethylene is the likely resting state of both 17 and 18. Whereas the design criterion via its correlation between the stability of the MCB and the rate-determining barrier indeed seeks to stabilize the MCB, it relies on RuCl2(L)(L')(═CH2) adducts as resting states. The change in resting state explains the discrepancy between the prediction and the actual performance of catalyst 17. To avoid such discrepancies and better address the multifaceted challenges of predicting catalytic performance, future de novo catalyst design studies should explore and test design criteria incorporating information from more than a single relative energy or intermediate.

Inhibition of the Decomposition Pathways of Ruthenium Olefin Metathesis Catalysts: Development of Highly Efficient Catalysts for Ethenolysis

Ruthenium-based Hoveyda-type olefin metathesis catalysts bearing novel rigid spirocyclic alkyl amino carbenes (CAACs) have been developed. They are characterized by exceptional stability toward decomposition through β-elimination and bimolecular pathways, thus enabling unprecedented efficiency in the cross-metathesis of seed oil-derived fatty acid esters with ethylene (ethenolysis). Catalyst loading as low as 100 ppb was applied to the ethenolysis of the model substrate methyl oleate, leading to a remarkable turnover number (TON) of 2.6 million, significantly higher than previously reported (TON 340 000 at 1 ppm and 744 000 at 0.5 ppm catalyst loading). Ethenolysis of methyl esters derived from high oleic sunflower oil and rapeseed oil, readily available on an industrial scale, inexpensive, and renewable feedstocks, was for the first time effectively carried out with 0.5 ppm catalyst loading with TON as high as 964 000.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Highly selective ethenolysis with acyclic-aminooxycarbene ruthenium catalysts

Acyclic carbene–ruthenium catalysts were developed for the ethenolysis. Remarkable catalytic efficiency (turnover numbers of 100 000) and excellent α-olefin selectivity (up to 98%) were exhibited.

Routes to High-Performing Ruthenium-Iodide Catalysts for Olefin Metathesis: Ligand Lability Is Key to Efficient Halide Exchange

Clean, high-yielding routes are described to ruthenium-diiodide catalysts that were recently shown to enable high productivity in olefin metathesis. For the second-generation Grubbs and Hoveyda catalysts (GII: RuCl2(H2IMes)(PCy3)(=CHPh); HII: RuCl2(H2IMes)(=CHAr), Ar = C6H4-2-O i Pr), slow salt metathesis is shown to arise from the low lability of the ancillary PCy3 or ether ligands, which retards access to the four-coordinate intermediate required for efficient halide exchange. To exploit the lability of the first-generation catalysts, the diiodide complex RuI2(PCy3)(=CHAr) HI-I 2 was prepared by treating "Grubbs I" (RuCl2(PCy3)2(=CHPh), GI) with NaI, H2C=CHAr (1a), and a phosphine-scavenging Merrifield iodide (MF-I) resin. Subsequent installation of H2IMes or cyclic (alkyl)(amino)carbene (CAAC) ligands afforded the second-generation iodide catalysts in good to excellent yields. Given the incompatibility of the nitro group with a free carbene, the iodo-Grela catalyst RuI2(H2IMes)(=CHAr') (nG-I 2 : Ar' = C6H3-2-O i Pr-4-NO2) was instead accessed by sequential salt metathesis of GI with NaI, installation of H2IMes, and finally cross-metathesis with the nitrostyrenyl ether H2C=CHAr' (1b), with MF-I as the phosphine scavenger. The bulky iodide ligands improve the selectivity for macrocyclization in ring-closing metathesis.

Advanced sol-gel process for efficient heterogeneous ring-closing metathesis

Olefin metathesis, a powerful synthetic method with numerous practical applications, can be improved by developing heterogeneous catalysts that can be recycled. In this study, a single-stage process for the entrapment of ruthenium-based catalysts was developed by the sol-gel process. System effectiveness was quantified by measuring the conversion of the ring-closing metathesis reaction of the substrate diethyl diallylmalonate and the leakage of the catalysts from the matrix. The results indicate that the nature of the precursor affects pore size and catalyst activity. Moreover, matrices prepared with tetraethoxysilane at an alkaline pH exhibit a better reaction rate than in the homogenous system under certain reaction conditions. To the best of our knowledge, this is the first study to present a one-step process that is simpler and faster than the methods reported in the literature for catalyst entrapment by the sol-gel process under standard conditions.

Olefin Metathesis by First-Row Transition Metals

Catalytic olefin metathesis based on the second- and third-row transition metals has become one of the most powerful transformations in modern organic chemistry. The shift to first-row metals to produce fine and commodity chemicals would be an important achievement to complement existing methods with inexpensive and greener alternatives. In addition, those systems can offer unusual reactivity based on the unique electronic structure of the base metals. In this Minireview, we summarize the progress of the development of alkylidenes and metallacycles of first-row transition metals from scandium to nickel capable of performing cycloaddition and cycloreversion steps, crucial reactions in olefin metathesis. In addition, we will discuss systems capable of performing olefin metathesis; however, the nature of active species is not yet known.

Challenging Metathesis Catalysts with Nucleophiles and Brønsted Base: Examining the Stability of State-of-the-Art Ruthenium Carbene Catalysts to Attack by Amines

Critical to advancing the uptake of olefin metathesis in leading contexts, including pharmaceutical manufacturing, is identification of highly active catalysts that resist decomposition. Amines constitute an aggressive challenge to ruthenium metathesis catalysts. Examined here is the impact of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), morpholine, n-butylamine, and triethylamine on Ru metathesis catalysts that represent the current state of the art, including cyclic alkyl amino carbene (CAAC) and N-heterocyclic carbene (NHC) complexes. Accordingly, the amine-tolerance of the nitro-Grela catalyst RuCl2(H2IMes)(=CHAr) (nG; Ar = C6H4-2-O i Pr-5-NO2) is compared with that of its CAAC analogues nGC1 and nGC2, and the Hoveyda-class catalyst RuCl2(C2)(=CHAr') HC2 (Ar' = C6H4-2-O i Pr). In C1, the carbene carbon is flanked by an N-2,6-Et2C6H3 group and a CMePh quaternary carbon; in C2, by an N-2- i Pr-6-MeC6H3 group and a CMe2 quaternary carbon. The impact of 1 equiv amine per Ru on turnover numbers (TONs) in ring-closing metathesis of diethyl diallylmalonate was assessed at 9 ppm Ru, at RT and 70 °C. The deleterious impact of amines followed the trend NEt3 ∼ NH2 n Bu ≪ DBU ∼ morpholine. Morpholine is shown to decompose nGC1 by nucleophilic abstraction of the methylidene ligand; DBU, by proton abstraction from the metallacyclobutane. Decomposition was minimized at 70 °C, at which nGC1 enabled TONs of ca. 60 000 even in the presence of morpholine or DBU, vs ca. 80 000 in the absence of base. Unexpectedly, H2IMes catalyst nG delivered 70-90% of the performance of nGC1 at high temperatures, and underwent decomposition by Brønsted base at a similar rate. Density functional theory (DFT) analysis shows that this similarity is due to comparable net electron donation by the H2IMes and C1 ligands. Catalysts bearing the smaller C2 ligand were comparatively insensitive to amines, owing to rapid, preferential bimolecular decomposition.

A Combined Bio-Chemical Synthesis Route for 1-Octene Sheds Light on Rhamnolipid Structure

Here we report a chemoenzymatic approach to synthesize 1-octene from carbohydrates via ethenolysis of rhamnolipids. Rhamnolipids synthesized by P. putida contain a double bond between carbon five and six, which is experimentally confirmed via olefin cross metathesis. Utilizing these lipids in the ethenolysis catalyzed by a Grubbs−Hoveyda-type catalyst selectively generates 1-octene and with good conversions. This study shows the potential of chemoenzymatic approaches to produce compounds for the chemical industry from renewable resources.

Vortex Fluidic Ethenolysis, Integrating a Rapid Quench of Ruthenium Olefin Metathesis Catalysts

Ruthenium-catalysed ethenolysis occurs in a vortex fluidic device (VFD) – a scalable, thin-film microfluidic continuous flow process. This process takes advantage of the efficient mass transfer of gaseous reagents into the dynamic thin film of liquid. Also reported is the rapid quenching of the ruthenium-based olefin metathesis catalyst by the addition of a saturated solution of N-acetyl-l-cysteine in MeCN, as a convenient alternative to previously reported quenching methods.

Integrating Activity with Accessibility in Olefin Metathesis: An Unprecedentedly Reactive Ruthenium-Indenylidene Catalyst

Access to leading olefin metathesis catalysts, including the Grubbs, Hoveyda, and Grela catalysts, ultimately rests on the nonscaleable transfer of a benzylidene ligand from an unstable, impure aryldiazomethane. The indenylidene ligand can be reliably installed, but to date yields much less reactive catalysts. A fast-initiating, dimeric indenylidene complex (Ru-1) is reported, which reconciles high activity with scaleable synthesis. Each Ru center in Ru-1 is stabilized by a state-of-the-art cyclic alkyl amino carbene (CAAC, C1) and a bridging chloride donor: the lability of the latter elevates the reactivity of Ru-1 to a level previously attainable only with benzylidene derivatives. Evaluation of initiation rate constants reveals that Ru-1 initiates >250× faster than indenylidene catalyst M2 (RuCl₂(H₂IMes)(PCy₃)(Ind)), and 65× faster than UC (RuCl₂(C1)₂(Ind)). The slow initiation previously regarded as characteristic of indenylidene catalysts is hence due to low ligand lability, not inherently slow cycloaddition at the Ru=CRR' site. In macrocyclization and "ethenolysis" of methyl oleate (i.e., transformation into α-olefins via cross-metathesis with C₂H₄), Ru-1 is comparable or superior to the corresponding, breakthrough CAAC-benzylidene catalyst. In ethenolysis, Ru-1 is 5× more robust to standard-grade (99.9%) C₂H₄ than the top-performing catalyst, probably reflecting steric protection at the quaternary CAAC carbon.

Evaluation of the performance and emission and spectroscopic analysis of an improved soy methyl ester

Herein, the performance, emission and physiochemical properties of a soy methyl ester (SME) and its combination with methyl oleate (MO) in a common rail direct injection (CRDI) engine were investigated. Moreover, the performance of the engine in terms of brake power (BP), brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and NO_x emission was assessed to compute the characteristics of the combination of SME with MO; the reasons for using MO in the blending process were the better ignition quality, oxidative stability and low-temperature flow properties of MO, striking a balance between oxidative stability and low flow properties. A remarkable reduction in the BSFC and an increase in the BTE were found in the blended biodiesel (S80-MO20, S70-M30, and S50-M50) as compared to the case of SME. The blended biodiesel was also characterized by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-vis) and nuclear magnetic resonance (NMR) spectroscopy. In the FTIR spectra, a peak was observed at 1745 cm⁻¹, confirming the presence of a triglyceride ester linkage. Since UV-vis spectroscopy is an affordable technique, herein, it has been employed to detect the presence of conjugated dienes in the oxidized biodiesel. The linear line fitted for absorbance versus the percentage of the blended fuel at 320 nm showed a high coefficient of determination (R² = 0.9454). In addition, H NMR spectroscopy was employed to study the oxidative stability of the blended fuel. Different functional groups with their respective peaks (in ppm) are indicated in the NMR spectra.

SME with MO at higher blended percentages was used in the emission performance test in an advance developed CRDI engine without any engine modification.

Efficient Conversion of Renewable Unsaturated Fatty Acid Methyl Esters by Cross-Metathesis with Eugenol

Cross-metathesis of unsaturated fatty acid methyl esters (methyl oleate (MO), methyl petroselinate (MP), and methyl erucate (ME), obtained from vegetable oils) with eugenol (obtained from clove oil) proceeded under green, mild conditions (in 2-propanol or ethanol at 50 °C) in the presence of a ruthenium-carbene catalyst (called a second-generation Grubbs catalyst). These metathesis reactions proceeded with both high conversion (>90% of MO, MP) and selectivity (>98%) even with low catalyst loading (0.1 mol % Ru).

Amines as effective ligands in iridium-catalyzed decarbonylative dehydration of biosourced substrates

Linear α-olefins (LAOs) and linear internal olefins (LIOs) are essential intermediates in the synthesis of surfactants, lubricants, and polymers.

Selective production of linear α-olefins via catalytic deoxygenation of fatty acids and derivatives

Various homogeneous, heterogeneous, and enzyme catalysis strategies for the selective synthesis of linear α-olefins from fatty acids and their derivatives are reviewed.

Remarkably Efficient Microwave-Assisted Cross-Metathesis of Lipids under Solvent-Free Conditions

Catalytic transformation of renewable feedstocks into fine chemicals is in high demands and olefin metathesis is a sophisticated tool for biomass conversion. Nevertheless, the large-scale viability of such processes depends on the conversion efficiency, energy efficiency, catalytic activity, selective conversion into desired products, and environmental footprint of the process. Therefore, conversions of renewables by using simple, swift, and efficient methods are desirable. A microwave-assisted ethenolysis and alkenolysis (using 1,5-hexadiene) of canola oil and methyl esters derived from canola oil (COME) and waste/recycled cooking oil (WOME) was carried out by using ruthenium-based catalytic systems. A systematic study using 1st and 2nd generation Grubbs and Hoveyda-Grubbs catalysts was carried out. Among all ruthenium catalysts, 2nd generation Hoveyda-Grubbs catalyst was found to be highly active in the range of 0.002-0.1 mol % loading. The conversions proved to be rapid providing unprecedented turnover frequencies (TOFs). High TOFs were achieved for ethenolysis of COME (21 450 min^-1 ), direct ethenolysis of canola oil (19 110 min^-1 ), for WOME (15 840 min^-1 ) and for cross-metathesis of 1,5-hexadiene with COME (10 920 min^-1 ). The ethenolysis of commercial methyl oleate was also performed with a TOF of 8000 min^-1 under microwave conditions.

The Future of Ethenolysis in Biobased Chemistry

The desire to utilise biobased feedstocks and develop more sustainable chemistry poses new challenges in catalysis. A synthetically useful catalytic conversion is ethenolysis, a cross metathesis reaction with ethylene. In this Review, the state of the art of ethenolysis in biobased chemistry was extensively examined using methyl oleate as a model compound for fatty acids. Allied to this, the ethenolysis of fatty acid, polymers and more challenging substrates are reviewed. To determine the limiting factors for the application of ethenolysis on biomass, the influence of reaction parameters were investigated and the bottlenecks for reaching high turnover numbers identified.

Cerium(IV) Imido Complexes: Structural, Computational, and Reactivity Studies

A series of alkali metal capped cerium(IV) imido complexes, [M(solv)_x][Ce═N(3,5-(CF₃)₂C₆H₃)(TriNOx)] (M = Li, K, Rb, Cs; solv = TMEDA, THF, Et₂O, or DME), was isolated and fully characterized. An X-ray structural investigation of the cerium imido complexes demonstrated the impact of the alkali metal counterions on the geometry of the [Ce═N(3,5-(CF₃)₂C₆H₃)(TriNOx)]^- moiety. Substantial shortening of the Ce═N bond was observed with increasing size of the alkali metal cation. The first complex featuring an unsupported, terminal multiple bond between a Ce(IV) ion and a ligand fragment was also isolated by encapsulation of a Cs⁺ counterion with 2.2.2-cryptand. This complex shows the shortest recorded Ce═N bond length of 2.077(3) Å. Computational investigation of the cerium imido complexes using DFT methods showed a relatively larger contribution of the cerium 5d orbital than the 4f orbital to the Ce═N bonds. The [K(DME)₂][Ce═N(3,5-(CF₃)₂C₆H₃)(TriNOx)] complex cleaves the Si-O bond in (Me₃Si)₂O, yielding the [(Me₃SiO)Ce^IV(TriNOx)] adduct. The reaction of the rubidium capped imido complex with benzophenone resulted in the formation of a rare Ce(IV)-oxo complex, that was stabilized by a supramolecular, tetrameric oligomerization of the Ce═O units with rubidium cations.

Bis(Cyclic Alkyl Amino Carbene) Ruthenium Complexes: A Versatile, Highly Efficient Tool for Olefin Metathesis

The state-of-the-art in olefin metathesis is application of N-heterocyclic carbene (NHC)-containing ruthenium alkylidenes for the formation of internal C=C bonds and of cyclic alkyl amino carbene (CAAC)-containing ruthenium benzylidenes in the production of terminal olefins. A straightforward synthesis of bis(CAAC)Ru indenylidene complexes, which are highly effective in the formation of both terminal and internal C=C bonds at loadings as low as 1 ppm, is now reported.

Fishing for the right catalyst for the cross-metathesis reaction of methyl oleate with 2-methyl-2-butene

A comparison of the reactivity of different ruthenium-based complexes in the cross-metathesis reaction of methyl oleate was presented.

Ethenolysis: A Green Catalytic Tool to Cleave Carbon-Carbon Double Bonds

Remarkable innovations have been made in the field of olefin metathesis due to the design and preparation of new catalysts. Ethenolysis, which is cross-metathesis with ethylene, represents one catalytic transformation that has been used with the purpose of cleaving internal carbon-carbon double bonds. The objectives were either the ring opening of cyclic olefins to produce dienes or the shortening of unsaturated hydrocarbon chains to degrade polymers or generate valuable shorter terminal olefins in a controlled manner. This Review summarizes several aspects of this reaction: the catalysts, their degradation in the presence of ethylene, some parameters driving their productivity, the side reactions, and the applications of ethenolysis in organic synthesis and in potential industrial applications.

Cross metathesis of methyl oleate (MO) with terminal, internal olefins by ruthenium catalysts: factors affecting the efficient MO conversion and the selectivity

Cross metathesis (CM) of methyl oleate (MO) with cis-4-octene, cis-stilbene, allyltrimethylsilane by RuCl₂(PCy₃)(IMesH₂)(CHPh) yielded CM products with high MO conversion, high selectivity; the effect of olefin substituents, conditions was explored.

Depolymerization of 1,4-polybutadiene by metathesis: high yield of large macrocyclic oligo(butadiene)s by ligand selectivity control

Herein, we demonstrate a practical high yield preparation of large macrocyclic oligo(butadiene)s, preferably the C16 to C44 fraction, from commercial 1,4-polybutadiene by exploring intramolecular backbiting using a series of commercially available Ru catalysts.