Influence of the Cis Ligand on the H−H Separation and the Rotation Barrier of the Dihydrogen in Osmium-Elongated Dihydrogen Complexes Containing an Ortho-Metalated Ketone

Two Synthetic Tools to Deepen the Understanding of the Influence of Stereochemistry on the Properties of Iridium(III) Heteroleptic Emitters

Two complementary procedures are presented to prepare cis-pyridyl-iridium(III) emitters of the class [3b+3b+3b'] with two orthometalated ligands of the 2-phenylpyridine type (3b) and a third ligand (3b'). They allowed to obtain four emitters of this class and to compare their properties with those of the trans-pyridyl isomers. The finding starts from IrH5(PiPr3)2, which reacts with 2-(p-tolyl)pyridine to give fac-[Ir{κ2-C,N-[C6MeH3-py]}3] with an almost quantitative yield. Stirring the latter in the appropriate amount of a saturated solution of HCl in toluene results in the cis-pyridyl adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} stabilized with p-tolylpyridinium chloride, which can also be transformed into dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2. Adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} directly generates cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-Isoqui]}] and cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-py]}] by transmetalation from Li[2-(isoquinolin-1-yl)-C6H4] and Li[py-2-C6H4]. Dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2 is also a useful starting complex when the precursor molecule of 3b' has a fairly acidic hydrogen atom, suitable for removal by hydroxide groups. Thus, its reactions with 2-picolinic acid and acetylacetone (Hacac) lead to cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,N-[OC(O)-py]} and cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,O-[acac]}. The stereochemistry of the emitter does not significantly influence the emission wavelengths. On the contrary, its efficiency is highly dependent on and associated with the stability of the isomer. The more stable isomer shows a higher quantum yield and color purity.

Cyclometalated Osmium Compounds and beyond: Synthesis, Properties, Applications

The synthesis of cyclometalated osmium complexes is usually more complicated than of other transition metals such as Ni, Pd, Pt, Rh, where cyclometalation reactions readily occur via direct activation of C–H bonds. It differs also from their ruthenium analogs. Cyclometalation for osmium usually occurs under more severe conditions, in polar solvents, using specific precursors, stronger acids, or bases. Such requirements expand reaction mechanisms to electrophilic activation, transmetalation, and oxidative addition, often involving C–H bond activations. Osmacycles exhibit specific applications in homogeneous catalysis, photophysics, bioelectrocatalysis and are studied as anticancer agents. This review describes major synthetic pathways to osmacycles and related compounds and discusses their practical applications.

Reactivity of a carbonyl moiety in organotin(iv) compounds: novel Pd(ii) and Cu(ii) complexes supported by organotin(iv) ligands

Converting the carbonyl moiety of an (aryl)organotin(iv) compound gives other functional groups that can act as metalloligands.

Amide-Directed Formation of Five-Coordinate Osmium Alkylidenes from Alkynes

The amide-directed synthesis of five-coordinate osmium alkylidene derivatives from alkynes is reported. These types of complexes, which have been elusive until now because of the tendency of osmium to give hydride alkylidyne species, are prepared by reaction of the dihydride OsH₂Cl₂(PⁱPr₃)₂ (1) with terminal alkynes containing a distal amide group. Complex 1 reacts with N-phenylhex-5-ynamide and N-phenylhepta-6-ynamide to give OsCl₂{=C(CH₃)(CH₂)_nNH(CO)Ph}(PⁱPr₃)₂ (n = 3 (2), 4 (3)). The relative position of carbonyl and NH groups in the organic substrates has no influence on the reaction. Thus, treatment of 1 with N-(pent-4-yn-1-yl)benzamide leads to OsCl₂{=C(CH₃)(CH₂)₃NHC(O)Ph}(PⁱPr₃)₂ (4). The new compounds are intermediate species in the cleavage of the C–C triple bond of the alkynes. Under mild conditions, they undergo the rupture of the C_α–CH₃ bond of the alkylidene, which comes from the alkyne triple bond, to afford six-coordinate hydride–alkylidyne derivatives. In dichloromethane, complex 2 gives a 10:7 mixture of OsHCl₂{≡C(CH₂)₃C(O)NHPh}(PⁱPr₃)₂ (5) and OsHCl₂{≡CCH(CH₃)(CH₂)₂C(O)NHPh}(PⁱPr₃)₂ (6). The first complex contains a linear separation between the alkylidyne C_α atom and the amide group, whereas the spacer is branched in the second complex. In contrast to the case for 2, complex 4 selectively affords OsHCl₂{≡C(CH₂)₃NHC(O)Ph}(PⁱPr₃)₂ (7). In spite of their instability, these compounds give the alkylidene–allene metathesis, being a useful entry to five-coordinate vinylidene complexes, including the dicarbon-disubstituted OsCl₂(=C=CMe₂)(PⁱPr₃)₂ (8) and the monosubstituted OsCl₂(=C=CHCy)(PⁱPr₃)₂ (9).

Preparation and characterization of novel Os-diolefin dimers: new entry to Os-cyclooctadiene complexes

The complex [H(EtOH)2][{OsCl(eta4-COD)}2(mu-H)(mu-Cl)2] (1) has been prepared in high yield by treatment of OsCl3.3H2O (54% Os) with 1,5-cyclooctadiene in ethanol under reflux. Under air, it is unstable and undergoes oxidation by action of O2 to afford the neutral derivative {OsCl(eta4-COD)}2(mu-H)(mu-Cl)2 (2). The terminal chlorine ligands of the anion of 1 are activated toward nucleophilic substitution. Thus, reaction of the salt [NBu4][{OsCl(eta4-COD)}2(mu-H)(mu-Cl)2] (1a) with NaCp in toluene gives [NBu4][{Os(mu1-C5H5)(eta4-COD)}(mu-H)(mu-Cl)2{OsCl(eta4-COD)}] (3) as a result of the replacement of one of the terminal chlorine atoms by the cyclopentadienyl ligand. The CH2 group of the latter can be deprotonated by the bridging methoxy ligand of the iridium dimer [Ir(mu-OMe)(eta4-COD)]2. The reaction leads to the trinuclear derivative [NBu4][{(eta4-COD)Ir(mu5-C5H4-mu1)Os(eta4-COD)}(mu-H)(mu-Cl)2{OsCl(eta4-COD)}] (4) containing a bridging C5H4 ligand that is eta1-coordinated to an osmium atom of the dimeric unit and mu5-coordinated to the Ir(eta4-COD) moiety. Salt 1a also reacts with LiC[triple bond]CPh. In this case, the reaction produces the substitution of both terminal chlorine ligands to afford the bis(alkynyl) derivative [NBu4][{Os(C[triple bond]CPh)(eta4-COD)}2(mu-H)(mu-Cl)2] (5). Complexes 1, 2, 3, and 4 have been characterized by X-ray diffraction analysis. Although the separations between the osmium atoms are short, between 2.6696(4) and 2.8633(5) A, theoretical calculations indicate that only in 2 is there direct metal-metal interaction, as the bond order is 0.5.

Hydride-Alkenylcarbyne to Alkenylcarbene Transformation in Bisphosphine-Osmium Complexes

The elongated dihydrogen complex [formula: see text](1) reacts with 1,1-diphenyl-2-propyn-1-ol and 2-methyl-3-butyn-2-ol to give the hydride-hydroxyvinylidene-pi-alkynol derivatives [OsH{=C=CHC(OH)R2}{eta2-HC(triple bond)CC(OH)R2}(PiPr3)2]BF4 (R = Ph (2), Me (3)), where the pi-alkynols act as four-electron donor ligands. Treatment of 2 and 3 with HBF(4) and coordinating solvents leads to the dicationic hydride-alkenylcarbyne compounds [OsH((triple bond)CCH=CR2)S2(PiPr3)2][BF4]2 (R = Ph, S = H(2)O (4), CH(3)CN (5); R = Me, S = CH(3)CN (6)), which in acetonitrile evolve into the alkenylcarbene complexes [Os(=CHCH=CR2)(CH3CN)3(PiPr3)2][BF4](2) (R = Ph (7), Me (8)) by means of a concerted 1,2-hydrogen shift from the osmium to the carbyne carbon atom. Treatment of 2-propanol solutions of 5 with NaCl affords OsHCl2((triple bond)CCH=CPh2)(PiPr3)2 (10), which reacts with AgBF(4) and acetonitrile to give [OsHCl((triple bond)CCH=CPh2)(CH3CN)(PiPr3)2]BF(4) (11). In this solvent complex 11 is converted to [OsCl(=CHCH=CPh2)(CH3CN)2(PiPr3)2]BF(4) (12). Complex 5 reacts with CO to give [Os(=CHCH=CPh2)(CO)(CH3CN)2(PiPr3)2][BF(4)](2) (15). DFT calculations and kinetic studies for the hydride-alkenylcarbyne to alkenylcarbene transformation show that the difference of energy between the starting compounds and the transition states, which can be described as eta(2)-carbene species [formula: see text] increases with the basicity of the metallic center. The X-ray structures of 4 and 7 and the rotational barriers for the carbene ligands of 7, 8, and 12 are also reported.

Routes to unique palladium A-frame complexes with a bridging fluoro-ligand

Treatment of a toluene solution of [PdMe(2)(Cy(2)PCH(2)PCy(2))](1) with pentafluoropyridine in the presence of traces of water affords the generation of the A-frame complexes [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][SiMeF(4)]() and [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][OC(5)NF(4)](2b). If the reaction is performed in an NMR tube equipped with a PFA inliner, complex 2b is produced, only. Treatment of 1 with pentafluoropyridine in the presence of an excess water yields the pyridyloxy complex [PdMe(OC(5)NF(4))(Cy(2)PCH(2)PCy(2))](3). Compound [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][FHF](2c) bearing a bifluoride anion instead of SiMeF(4)(-) or OC(5)NF(4)(-) can be generated by reaction of 1 with substoichiometric amounts of Et(3)N.3HF. The analogous complex [(PdMe)(2){mu-kappa(2)(P,P)Ph(2)PCH(2)PPh(2)}(2)(mu-F)][FHF] (5c) has been synthesized by addition of Ph(2)PCH(2)PPh(2) to a solution of [PdMe(2)(Me(2)NCH(2)CH(2)NMe(2))](4) in THF and subsequent treatment of the reaction mixture with Et(3)N.3HF. The structure of the A-frame complex 5c has been determined by X-ray crystallography.