Ruthenium Olefin Metathesis Catalysts Bearing an N-Fluorophenyl-N-Mesityl-Substituted Unsymmetrical N-Heterocyclic Carbene

"Inverted" Cyclic(Alkyl)(Amino)Carbene (CAAC) Ruthenium Complex Catalyzed Isomerization Metathesis (ISOMET) of Long Chain Olefins to Propylene at Low Ethylene Pressure

Isomerization Metathesis (ISOMET) reaction is an emerging tool for "open loop" chemical recycling of polyethylene to propylene. Novel, latent N-Alkyl substituted Cyclic(Alkyl)(Amino)Carbene (CAAC)-ruthenium catalysts (5a-Ru, 3b-Ru - 6c-Ru) are developed rendering "inverted" chemical structure while showing enhanced ISOMET activity in combination with (RuHCl)(CO)(PPh3)3 (RuH) double bond isomerization co-catalyst. Systematic investigations reveal that the steric hindrance of the substituents on nitrogen and carbon atom adjacent to carbene moiety in the CAAC ligand have significantly improved the catalytic activity and robustness. In contrast to the NHC-Ru and CAAC-Ru catalyst systems known so far, these systems show higher isomerization metathesis (ISOMET) activity (TON: 7400) on the model compound 1-octadecene at as low as 3.0 bar optimized pressure, using technical grade (3.0) ethylene. The propylene content formed in the gas phase can reach up to 20% by volume.

Arylation of aldehydes catalyzed by fluorinated NHC-Rh(I) complexes

The synthesis and characterization of twelve Rh(I) complexes with fluorinated NHC ligands is described. Seven molecular structures of these complexes were unequivocally elucidated by single crystal X-ray diffraction techniques. In...

Fluorine-containing ruthenium-based olefin metathesis catalysts

The review summarizes literature data on the methods for the introduction of fluorine atoms and fluoralkyl groups into different ligands to construct metathesis-active ruthenium carbene complexes. It also analyzes the influence of fluorinated ligands on the catalytic activity of the complexes. The choice, structure and positions of fluorinated substituents in NHC ligands are generally dictated by the desire to increase the electrophilicity of the ruthenium atom due to the electron-withdrawing effect of fluorine atoms and fluoroalkyl groups, resulting, as a rule, in an increase in the activity of the ruthenium complex. In catalysts with unsymmetrical fluorine-containing NHC ligands, there is a possibility of additional Ru–F coordination, making the complexes much more stable and, consequently, more active. The presence of fluorine in chelating alkylidene ligands provides an increase in the catalyst initiation rate due to a weakening of the ruthenium – heteroatom bond. Besides, the introduction of polyfluoroalkyl groups into ligands solves the problem of catalyst recovery using fluorous biphasic systems for reuse.

The bibliography includes 172 references.

Ligand Promoted Olefination of Anilides for Indirectly Introducing Fluorinated Functional Groups via Palladium Catalyst

We report a palladium-catalyzed, ligand promoted, C-H fluorine-containing olefination of anilides with 4-bromo-3,3,4,4-tetrafluorobutene as the fluorinated reagent, which has a potential transformation into other compounds due to its -CF₂CF₂Br functional group. -CF₂CF₂H was obtained by using the mild reducing agent sodium borohydride. Bioactive compounds such as aminoglutethimide derivative and propham were well-tolerated in this reaction, both of which highlight the synthetic importance of this method.

Simple NMR predictors of catalytic hydrogenation activity for [Rh(cod)Cl(NHC)] complexes featuring fluorinated NHC ligands

A series of imidazolium salts precursors for N-heterocyclic carbenes (NHCs) featuring fluoroaryl substituents have been prepared along with their selenides and rhodium complexes. Tests of the catalytic activity of the [Rh(cod)Cl(NHC)] complexes in the transfer hydrogenation of acetophenone with iPrOH shows that the rhodium complexes bearing fluorinated NHCs are better than their non-fluorinated counterparts. The order of activity being 4-F-C6H4 < 2,4-F2-C6H3 < 2,4,5-F3-C6H2 < 2,6-F2-C6H3 < 2,4,6-F3-C6H2. This order of reactivity is consistent with a number of simple NMR measures of the electronic properties of these systems, including 1JCH of the NHC·HBF4 salts, δ(77Se) of the NHC selenides and 1JRh-C and δ(13Ccarbene) of the [Rh(cod)Cl(NHC)] complexes.

Ruthenium-based olefin metathesis catalysts with monodentate unsymmetrical NHC ligands

An overview on the catalytic properties of ruthenium complexes for olefin metathesis bearing monodentate unsymmetrical N-heterocyclic diaminocarbene ligands is provided. The non-symmetric nature of these NHC architectures strongly influences activity and selectivity of the resulting catalysts. The main achievements that have been accomplished in significant areas of olefin metathesis up to the current state of research are discussed.

Ruthenium Catalysts Supported by Amino-Substituted N-Heterocyclic Carbene Ligands for Olefin Metathesis of Challenging Substrates

N-Heterocyclic carbene (NHC) ligands IMesNMe2 and IMes(NMe2)2 derived from the well-known IMes ligand by substituting the carbenic heterocycle with one and two dimethylamino groups, respectively, were employed for the synthesis of second-generation Grubbs- and Grubbs-Hoveyda-type ruthenium metathesis precatalysts. Whereas the stability of the complexes was found to depend on the degree of dimethylamino-substitution and on the type of complex, the backbone-substitution was shown to have a positive impact on their catalytic activity in ring-closing metathesis, with a more pronounced effect in the second-generation Grubbs-type series. The new complexes were successfully implemented in a number of challenging olefin metathesis reactions leading to the formation of tetra-substituted C=C double bonds and/or functionalized compounds.

Synthesis and catalytic activity of ruthenium indenylidene complexes bearing unsymmetrical NHC containing a heteroaromatic moiety

New ruthenium(ii) indenylidene catalysts were synthesized and used in olefin metathesis reactions in toluene under air, leading to high conversions and good selectivities.

Ruthenium catalysts bearing a benzimidazolylidene ligand for the metathetical ring-closure of tetrasubstituted cycloolefins

Deprotonation of 1,3-di(2-tolyl)benzimidazolium tetrafluoroborate with a strong base afforded 1,3-di(2-tolyl)benzimidazol-2-ylidene (BTol), which dimerized progressively into the corresponding dibenzotetraazafulvalene. The complexes [RhCl(COD)(BTol)] (COD is 1,5-cyclooctadiene) and cis-[RhCl(CO)2(BTol)] were synthesized to probe the steric and electronic parameters of BTol. Comparison of the percentage of buried volume (%VBur) and of the Tolman electronic parameter (TEP) of BTol with those determined previously for 1,3-dimesitylbenzimidazol-2-ylidene (BMes) revealed that the two N-heterocyclic carbenes displayed similar electron donicities, yet the 2-tolyl substituents took a slightly greater share of the rhodium coordination sphere than the mesityl groups, due to a more pronounced tilt. The anti,anti conformation adopted by BTol in the molecular structure of [RhCl(COD)(BTol)] ensured nonetheless a remarkably unhindered access to the metal center, as evidenced by steric maps. Second-generation ruthenium-benzylidene and isopropoxybenzylidene complexes featuring the BTol ligand were obtained via phosphine exchange from the first generation Grubbs and Hoveyda-Grubbs catalysts, respectively. The atropisomerism of the 2-tolyl substituents within [RuCl2(=CHPh)(PCy3)(BTol)] was investigated by using variable temperature NMR spectroscopy, and the molecular structures of all four possible rotamers of [RuCl2(=CH-o-O(i)PrC6H4)(BTol)] were determined by X-ray crystallography. Both complexes were highly active at promoting the ring-closing metathesis (RCM) of model α,ω-dienes. The replacement of BMes with BTol was particularly beneficial to achieve the ring-closure of tetrasubstituted cycloalkenes. More specifically, the stable isopropoxybenzylidene chelate enabled an almost quantitative RCM of two challenging substrates, viz., diethyl 2,2-bis(2-methylallyl)malonate and N,N-bis(2-methylallyl)tosylamide, within a few hours at 60 °C.

Cycloalkyl-based unsymmetrical unsaturated (U2)-NHC ligands: flexibility and dissymmetry in ruthenium-catalysed olefin metathesis

Structural features, chemical stabilities and catalytic profiles in olefin metathesis of a new library of low-cost cycloalkyl-based U₂-NHC Ru complexes were disclosed.

A thermally robust ruthenium phosphonium alkylidene catalyst — the effect of more bulky N-heterocyclic carbene ligands on catalyst performance in olefin metathesis reactions

Three new ruthenium phosphonium alkylidene complexes incorporating N-heterocyclic carbene ligands with bulky N-aryl groups (2,6-diethyl, L = 1,3-bis(2,6-diethylphenyl)imidazolin-2-ylidene (H2IDEP) and 2,6-diisopropyl, L = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene (H2ID-i-PP)) were synthesized and characterized. The H2ID-i-PP supported complex was found to exhibit excellent thermal stabilities relative to the parent N-mesityl (N-Mes) complexes as well as the H2IDEP supported complexes. All three phosphonium alkylidenes were evaluated in comparison to the N-Mes derivative and Grubbs second generation catalyst using standard olefin metathesis reactions and conditions. The complex containing the bulky H2ID-i-PP ligand was found to have excellent activity and longevity in comparison to the other catalysts. Although initiation rates were slow for this sterically bulky precatalyst, its superior activity led to the best overall efficiency in test reactions.

Flexibility of N-heterocyclic carbene ligands in ruthenium complexes relevant to olefin metathesis and their impact in the first coordination sphere of the metal

We present a detailed static and dynamics characterization of 11 N-heterocyclic carbene (NHC) ligands in Ru complexes of the general formula (NHC)Cl(2)Ru horizontal lineCH(2). Analysis of the dynamic trajectories indicates that the nature of the N substituent can result in extremely different flexibilities of the Ru complexes. In almost all the cases the N substituent trans to the Ru-ylidene bond is severely folded so that it protects the vacant coordination position at the Ru center. Limited flexibility is instead associated with the N substituent on the side of the Ru-ylidene bond. NHCs with a single ortho substituent, either a simple Me or a bulkier i-Pr group, have a preferential folding that bends the unsubstituted side of the ring toward the halide-Ru-halide plane. Analysis of the dynamics trajectories in terms of buried volume indicates that the real bulkiness of these systems can be somewhat modulated, and this flexibility is a key feature that allows NHCs to modulate their encumbrance around the metal in order to make room for bulky substrates. Analysis of the buried volume in terms of steric maps showed that NHCs with mesityl or 2,6-diisopropylphenyl N substituents have quite different reactive pockets: rather flat with constant pressure on the halide-Ru-halide plane in the former and vault-shaped with higher pressure on the sides in the latter. Regarding the NHCs with an ortho tolyl or i-Pr group on the N substituent, the steric maps quantify the higher impact of the unsubstituted side of the ligand in the first coordination sphere of the metal and evidence the overall C(s)- and C(2)-symmetric reactive pockets of the corresponding complexes. We believe that a detailed characterization of the differently shaped reactive pockets is a further conceptual tool that can be used to rationalize the experimentally different performances of catalysts bearing these ligands or to devise new applications.