Ligand Variations in New Sulfonamide-Supported Group 4 Ring-Opening Polymerization Catalysts

Recent Advances in the Titanium-Based Catalysts for Ring-Opening Polymerization

At present, economic development and daily life cannot be separated from organic synthetic polymers. However, a large number of nondegradable polymers have caused serious pollution to the environment. It is necessary for sustainable development to use biodegradable materials instead of traditional polymers, but it is not yet comparable in performance and cost to the competitor it will replace. Therefore, there is a long way to go to develop effective synthesis methods. Through ring-opening polymerization, some cyclic monomers, such as ε-caprolactone or lactide, can be synthesized into biodegradable polymers, which can not only replace traditional synthetic polymers in some fields but also have applications in drug delivery, surgical consumables, human implant materials, bone materials, etc. Ring-opening polymerization is a potential candidate for solving environmental pollution. For ring-opening polymerization, catalysts are very important, among which titanium catalysts have attracted much attention because of their high efficiency, economy, and nontoxicity. In this paper, the development status of organotitanium compounds as ring-opening polymerization catalysts is reviewed, including the effects of different ligand structures on polymerization behavior and polymer structure, and its development trend is prospected. We hope that this review will be helpful for developing efficient ring-opening polymerization catalysts.

Titanium Complexes of Salicylbenzoxazole and Salicylbenzothiazole Ligands for the Ring-Opening Polymerization of ε-Caprolactone and Substituted ε-Caprolactones and Their Copolymerizations

Two series of titanium complexes, including salicylbenzoxazole titanium complexes (1-4) and salicylbenzothiazole titanium complexes (5-8), were successfully synthesized and characterized by NMR spectroscopy, elemental analysis, and X-ray diffraction crystallography (for 2 and 5). The ¹H NMR spectra of complexes 7 and 8 reveal fluxional behavior in solution at room temperature, and the activation parameters were determined by lineshape analysis of variable-temperature (VT) NMR spectra in toluene-d₈: for 7, ΔH^⧧ = 73.0 ± 1.8 kJ mol^-1, ΔS^⧧ = 22.1 ± 5.5 J mol^-1 K^-1; for 8, ΔH^⧧ = 73.7 ± 1.2 kJ mol^-1, ΔS^⧧ = 20.3 ± 3.8 J mol^-1 K^-1. The positive values of ΔS^⧧ suggested that the isomerization occurred via a dissociative mechanism. All complexes were active initiators for the ring-opening polymerization of ε-caprolactone (ε-CL) and three substituted ε-CLs: γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL). Of all complexes, complex 5 was found to be the most active initiator in this study. The copolymerizations between ε-CL and three substituted ε-CLs produced completely random copolymers. The polymerization was proposed to proceed via a dissociative coordination-insertion mechanism. The catalytic activity of the salicylbenzoxazole titanium complex was lower than that of its closely related salicylbenzothiazole titanium congener. Additionally, DFT calculations unveiled that the ligand decoordination step and the less steric congestion at the titanium center in the salicylbenzothiazole titanium complexes were the key factors in enhancing the catalytic rate.

Titanium complexes of pyrrolylaldiminate ligands and their exploitation for the ring-opening polymerization of cyclic esters

A series of six-coordinate titanium complexes 1-6 supported by pyrrolylaldiminate ligands were prepared via the reaction of 2 equivalents of ligands and Ti(OⁱPr)₄ in toluene at 70 °C. The X-ray structure of 2 revealed that the two ligands were κ²-coordinated to the titanium center with the two pyrrole nitrogen atoms in trans positions and the two imine nitrogen atoms in cis positions. All complexes were active initiators for the ring-opening polymerization (ROP) of rac-lactide (rac-LA), ε-caprolactone (ε-CL), and three substituted ε-caprolactones (γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL)). Polymerizations of all monomers were well controlled, affording predetermined molar masses and narrow dispersity values. Complex 5 exhibited the highest polymerization activities with rac-LA and ε-CL and its performance was comparable to other highly active six-coordinate titanium complexes reported thus far. Kinetic results revealed a first-order dependency on the monomer concentration, and the rate of polymerization was greatly influenced by the substituent on the imine nitrogen. End-group analysis of the isolated PLA and PCL suggested a coordination-insertion mechanism.

Investigation of iron-ammine and amido complexes within a C3-symmetrical phosphinic amido tripodal ligand

The primary and secondary coordination spheres can have large regulatory effects on the properties of metal complexes. To examine their influences on the properties of monomeric Fe complexes, the tripodal ligand containing phosphinic amido groups, N,N',N''-[nitrilotris(ethane-2,1-diyl)]tris(P,P-diphenylphosphinic amido) ([poat]^3-), was used to prepare [Fe^II/IIIpoat]^-/0 complexes. The Fe^II complex was four-coordinate with 4 N-atom donors comprising the primary coordination sphere. The Fe^III complex was six-coordinate with two additional ligands coming from coordination of O-atom donors on two of the phosphinic amido groups in [poat]^3-. In the crystalline phase, each complex was part of a cluster containing potassium ions in which KO[double bond, length as m-dash]P interactions served to connect two metal complexes. The [Fe^II/IIIpoat]^-/0 complexes bound an NH₃ molecule to form trigonal bipyramidal structures that also formed three intramolecular hydrogen bonds between the ammine ligand and the O[double bond, length as m-dash]P units of [poat]^3-. The relatively negative one-electron redox potential of -1.21 V vs. [Fe^III/IICp₂]^+/0 is attributed to the phosphinic amido group of the [poat]^3- ligand. Attempts to form the Fe^III-amido complex via deprotonation were not conclusive but isolation of [Fe^IIIpoat(NHtol)]^- using the p-toluidine anion was successful, allowing for the full characterization of this complex.

NSSN-Type Group 4 Metal Complexes in the Ring-Opening Polymerization of l-Lactide

A new class of zirconium and hafnium complexes coordinated by linear dianonic tetradentate NSSN ligands is reported. The ligands feature two amide functions coupled with two thioether groups linked by a central flexible ethane bridge and two lateral rigid phenylene bridges and differ for the substituents on the aniline nitrogen atoms, i.e., isopropyl, cyclohexyl, or mesityl substituents: NSSN-iPr, NSSN-Cy, or NSSN-Mes. They were prepared by reacting 2-aminothiophenol with dibromoethane to afford the NSSN ligands without substituents on the aniline nitrogen atoms, which were subsequently alkylated through a reductive amination of acetone or cyclohexanone or palladium-catalyzed cross-coupling reaction with mesityl bromide. The corresponding zirconium and hafnium complexes 1-5 were obtained through a transamination reaction between the neutral ligands and Zr(NMe₂)₄ or Hf(NMe₂)₄ [(NSSN-iPr)Zr(NMe₂)₂ (1), (NSSN-Cy)Zr(NMe₂)₂ (2), (NSSN-Mes)Zr(NMe₂)₂ (3), (NSSN-iPr)Hf(NMe₂)₂ (4), and (NSSN-Cy)Hf(NMe₂)₂ (5)]. They were characterized in solution by NMR spectroscopy and in solid state by X-ray diffraction analysis (except for 3). All complexes present an octahedral coordination geometry with a fac-fac ligand wrapping and a cis relationship between the other two monodentate ligands. The catalytic performances of 1-5 in the ring-opening polymerization of cyclic esters were investigated. Complex 1 was the most active: its polymerization activity was superior to those generally displayed by zirconium complexes featuring OSSO ligands and compared well with those of the most active group 4 complexes operating in a toluene solution.

Stepwise assembly of heterobimetallic complexes: synthesis, structure, and physical properties

Bimetallic active sites are ubiquitous in metalloenzymes and have sparked investigations of synthetic models to aid in the establishment of structure-function relationship. We previously reported a series of discrete bimetallic complexes with [FeIII-(μ-OH)-MII] cores in which the ligand framework provides distinct binding sites for two metal centers. The formation of these complexes relied on a stepwise synthetic approach in which an FeIII-OH complex containing a sulfonamido tripodal ligand served as a synthon that promoted assembly. We have utilized this approach in the present study to produce a new series of bimetallic complexes with [FeIII-(μ-OH)-MII] cores (M = Ni, Cu, Zn) by using an ancillary ligand to the FeIII center that contains phosphinic amido groups. Assembly began with formation of an FeIII-OH that was subsequently used to bind the MII fragment that contained a triazacyclononane ligand. The series of bimetallic complexes were charactered structurally by X-ray diffraction methods, spectroscopically by absorption, vibrational, electron paramagnetic resonance spectroscopies, and electrochemically by cyclic voltammetry. A notable finding is that these new [FeIII-(μ-OH)-MII] complexes displayed significantly lower reduction potentials than their sulfonamido counterparts, which paves way for future studies on high valent bimetallic complexes in this scaffold.

Magnesium, calcium and zinc [N2N'] heteroscorpionate complexes

A new family of sterically demanding N2N' heteroscorpionate pro-ligands (HC(tBu2pz)2SiMe2N(H)R (R = iPr, tBu, Ph, Xyl)) has been prepared via a straightforward modular synthetic route. An extensive study into the synthesis and characterisation of lithium, magnesium, calcium and zinc complexes supported by both 3,5-tBu and 3,5-Me substituted N2N' ligand families has been conducted. Attempted deprotonation of the pro-ligands with nBuLi afforded the corresponding lithium salts Li{HC(tBu2pz)2SiMe2NR} (R = iPr (1), tBu (2), Ph (3) and Xyl (4)) but air- and thermal-sensitivity limited the yields of these potentially useful precursors; only the sterically encumbered ligand system allowed clean reactivity. Magnesium methyl complexes Mg{HC(tBu2pz)2SiMe2NR}Me (R = iPr (5) and R = Ph (6)) were prepared using an excess of the Grignard reagent MeMgCl. Magnesium butyl complexes were synthesised in good yields using the dialkyl precursor MgnBu2 to afford Mg{HC(R'2pz)2SiMe2NR}nBu (R' = Me; R = iPr (7), tBu (8), Ad (9), Ph (10). R' = tBu; R = iPr (11), Ph (12)). Protonolylsis reactions were used to synthesise magnesium and calcium amide complexes Mg{HC(R'2pz)2SiMe2NR}{N(SiHMe2)2} (R' = Me; R = iPr (13), tBu (14), Ph (15). R' = tBu; R = Ph (16)) or Mg{HC(R'2pz)2SiMe2NR}{N(SiMe3)2} (R' = Me; R = iPr (17), tBu (18), Ph (19). R' = tBu; R = Ph (20)), and Ca{HC(R'2pz)2SiMe2NR}{N(SiMe2)2} (L) (R' = Me; L = thf; R = iPr (21), tBu (22), Ph (23). R' = tBu; L = none; R = Ph (24). Zinc methyl complexes Zn{HC(R'2pz)2SiMe2NR}Me (R' = Me; R = iPr (25), tBu (26), Ph (27). R' = tBu; R = Ph (28)) were prepared by reaction of the N2N' heteroscorpionate pro-ligands with ZnMe2. In preliminary studies, magnesium amide complexes 16 and 20 were evaluated as initiators for the ring-opening polymerisation (ROP) of ε-caprolactone (ε-CL) and rac-lactide (rac-LA). Although the overall polymerisation control was poor, 16 and 20 were found to be active initiators.

Zinc and Magnesium Complexes Bearing Oxazoline-Derived Ligands and Their Application for Ring Opening Polymerization of Cyclic Esters

A family of different substituents aza(oxazoline) ligand-based zinc and magnesium complexes were synthesized. These complexes can catalyze ring opening polymerization of ε-caprolactone (ε-CL) and lactide (LA) to produce poly-ε-caprolactone and polylactide with good conversions. Polymerization studies showed that the zinc complexes 1a-4a had moderate activity toward LA and ε-CL polymerization. In situ IR spectroscopy research of zinc complexes showed that the N-donor group-substituted complexes had higher activity than that of the O-ether donor group. The substituted analogies and the flexibility of the amino backbone had a distinct influence on the activity of LA and ε-CL polymerization. The alternates of zinc with magnesium produced complexes 5a-8a, which achieved an obviously increased polymerization activity. Among these magnesium complexes, 7a showed the highest activity in the polymerization of LA. At [M]/[cat] = 1000, the reaction progress was stabilized in 5 min with up to 97% conversion of a monomer at ambient temperature.

Mononuclear complexes of a tridentate redox-active ligand with sulfonamido groups: structure, properties, and reactivity

The design of molecular complexes of earth-abundant first-row transition metals that can catalyze multi-electron C-H bond activation processes is of interest for achieving efficient, low-cost syntheses of target molecules. To overcome the propensity of these metals to perform single-electron processes, redox-active ligands have been utilized to provide additional electron equivalents. Herein, we report the synthesis of a novel redox active ligand, [ibaps]3-, which binds to transition metals such as FeII and CoII in a meridional fashion through the three anionic nitrogen atoms and provides additional coordination sites for other ligands. In this study, the neutral bidentate ligand 2,2'-bipyridine (bpy) was used to complete the coordination spheres of the metal ions and form NEt4[MII(ibaps)bpy] (M = Fe (1) or Co (1-Co)) salts. The FeII salt exhibited rich electrochemical properties and could be chemically oxidized by 1 and 2 equiv. of ferrocenium to form singly and doubly oxidized species, respectively. The reactivity of 1 towards intramolecular C-H bond amination of aryl azides at benzylic and aliphatic carbon centers was explored, and moderate to good yields of the resulting indoline products were obtained.

Heterodinuclear titanium/zinc catalysis: synthesis, characterization and activity for CO2/epoxide copolymerization and cyclic ester polymerization

The preparation of heterodinuclear complexes, especially those comprising early-late transition metals coordinated by a simple or symmetrical ancillary ligand, represents a fundamental challenge and an opportunity to prepare catalysts benefitting from synergic properties. Here, two new mixed titanium(iv)-zinc(ii) complexes, [LTi(OⁱPr)₂ZnEt] and [LTi(OⁱPr)₂ZnPh], both coordinated by a diphenolate tetra(amine) macrocyclic ligand (L), are prepared. The synthesis benefits from the discovery that reaction of the ligand with a single equivalent of titanium tetrakis(iso-propoxide) allows the efficient formation of a mono-Ti(iv) complex, [LTi(OⁱPr)₂]. All new complexes are characterized by a combination of single crystal X-ray diffraction, multinuclear NMR spectroscopy and mass spectrometry techniques. The two heterobimetallic complexes, [LTi(OⁱPr)₂ZnEt] and [LTi(OⁱPr)₂ZnPh], feature trianionic coordination by the macrocyclic ligand and bridging alkoxide groups coordinate to both the different metal centres. The heterodinuclear catalysts are compared to the mono-titanium analogue, [LTi(OⁱPr)₂], in various polymerization reactions. In the alternating copolymerizations of carbon dioxide and cyclohexene oxide, the mono-titanium complex is totally inactive whilst the heterodinuclear complexes show moderate activity (TOF = 3 h^-1); it should be noted the activity is measured using just 1 bar pressure of carbon dioxide. In the ring opening polymerization of lactide and ε-caprolactone, the mono-Ti(iv) complex is totally inactive whilst the heterodinuclear complexes show moderate-high activities, qualified by comparison to other known titanium polymerization catalysts (l-lactide, k_obs = 11 × 10^-4 s^-1 at 70 °C, 1 M in [lactide]) and ε-caprolactone (k_obs = 5 × 10^-4 s^-1 at 70 °C, 0.9 M in [ε-caprolactone]).

Modulating the Primary and Secondary Coordination Spheres within a Series of CoII-OH Complexes

The interplay between the primary and secondary coordination spheres is crucial to determining the properties of transition metal complexes. To examine these effects, a series of trigonal bipyramidal Co-OH complexes have been prepared with tripodal ligands that control both coordination spheres. The ligands contain a combination of either urea or sulfonamide groups that control the primary coordination sphere through anionic donors in the trigonal plane and the secondary coordination sphere through intramolecular hydrogen bonds. Variations in the anion donor strengths were evaluated using electronic absorbance spectroscopy and a qualitative ligand field analysis to find that deprotonated urea donors are stronger field ligands than deprotonated sulfonamides. Structural variations were found in the Co^II-O bond lengths that range from 1.953(4) to 2.051(3) Å; this range in bond lengths were attributed to the differences in the intramolecular hydrogen bonds that surround the hydroxido ligand. A similar trend was observed between the hydrogen bonding networks and the vibrations of the O-H bonds. Attempts to isolate the corresponding Co^III-OH complexes were hampered by their instability at room temperature.

A tetranuclear Sn(IV) 4-thiazolecarboxylate complex: synthesis, structure and catalytic behavior in the bulk ring-opening polymerization of glycolide

The reaction of 4-thiazolecarboxylic acid (Htzc) and dimethyltin(IV) dichloride with NaOH in mixed MeOH-H2O solvent led to the formation of a new Sn(IV) complex (Me2Sn)4(μ 3-O)2(tzc)4 (1). Its structure has been characterized by elemental analysis, IR spectroscopy and single crystal and powder X-ray diffraction. Single-crystal X-ray diffraction revealed that complex 1 crystallizes in the monoclinic P21/c space group with Z = 2 and has a tetranuclear structure with crystallographically imposed centrosymmetry. The as-synthesized complex 1 was found to be active toward the bulk solvent-free polymerization of glycolide, producing poly(glycolic acid) with a number-average molecular weight up to 55.5 kDa.

Group 4 metal complexes of Trost's semi-crown ligand: synthesis, structural characterization and studies on the ring-opening polymerization of lactides and ε-caprolactone

The synthesis of titanium(IV), zirconium(IV) and hafnium(IV) complexes of Trost's semi-crown ligand is described. All complexes were fully characterized by 1H and 13C NMR and mass spectroscopy. The molecular structures of the representative complexes 2, 3 and 4 were determined by single-crystal X-ray diffraction studies. The X-ray diffraction studies reveal that complexes 2, 3 and 4 crystallized in an orthorhombic crystal system. Complexes 2 and 3 have a monomeric structure in the solid state with distorted octahedral geometry around the metal center, whereas complex 4 was found to crystallize in a trimeric structure bridging with an oxygen atom, where the geometry around the titanium is distorted trigonal bipyramidal. The activities and stereoselectivities of these complexes toward the ring-opening polymerization (ROP) of lactides (L-LA and rac-LA) and ε-caprolactone (CL) have been investigated. Complexes 1–4 were found to be efficient single-component initiators for the ring-opening polymerization of cyclic esters and yielded high molecular weight polymers (Mn) with narrow molecular weight distributions (MWD).The microstructure of the resultant polylactides (PLAs) from rac-LA was determined. Complexes 2 and 3 afforded isotactic-enriched PLA (Pm = 0.78–0.71) with narrow MWD (1.07–1.04), on the other hand complexes 1 and 4 produced atactic PLA. Kinetic and post polymerization studies confirm that the polymerization proceeds through the coordination–insertion mechanism.

Heterotrimetallic sandwich complexes supported by sulfonamido ligands

Co^II complexes bearing sulfonamido ligands derived from tris(2-aminoethyl)amine (H₆tren) assemble into complex architectures in the presence of Group II ions through interactions between the Group II ion and the sulfonyl oxygens.

Synthesis and structural characterization of titanium and zirconium complexes containing half-salen ligands as catalysts for polymerization reactions

Ti(iv) and Zr(iv) complexes of tridentate half-salen ligands were synthesized for the polymerization of lactide and ε-CL, homopolymerization, copolymerization and coupling of epoxides with CO₂. All the complexes were found to be effective catalysts for different polymerization reactions.

Crystal structure of N-[(1S,2S)-2-amino-cyclo-hex-yl]-2,4,6-tri-methyl-benzene-sulfonamide

The title compound, C15H24N2O2S, was synthesized via a substitution reaction between the enanti-opure (1S,2S)-(+)-1,2-di-amino-cyclo-hexane and 2,4,6-tri-methyl-benzene-1-sulfonyl chloride. The cyclo-hexyl and phenyl substituents are oriented gauche around the sulfonamide S-N bond. In the crystal, mol-ecules are linked via N-H⋯N hydrogen bonds, forming chains propagating along [100].

N,O-Chelating Four-Membered Metallacyclic Titanium(IV) Complexes for Atom-Economic Catalytic Reactions

Titanium, as the second most abundant transition metal in the earth's crust, lends itself as a sustainable and inexpensive resource in catalysis. Its nontoxicity and biocompatibility are also attractive features for handling and disposal. Titanium has excelled as a catalyst for a broad range of transformations, including ethylene and α-olefin polymerizations. However, many reactions relevant to fine chemical synthesis have preferrentially employed late transition metals, and reactive, inexpensive early transition metals have been largely overlooked. In addition to promising reactivity, titanium complexes feature more robust character compared with some other highly Lewis-acidic metals such as those found in the lanthanide series. Since the advent of modulating ligand scaffolds, titanium has found use in a growing variety of reactions as a versatile homogeneous catalyst. These catalytic transformations include hydrofunctionalization reactions (adding an element-hydrogen (E-H) bond across a C-C multiple bond), as well as the ring-opening polymerization of cyclic esters, all of which are atom-economic transformations. Our investigations have focused on tight bite angle monoanionic N,O-chelating ligands, forming four-membered metallacycles. These ligand sets, including amidates, ureates, pyridonates, and sulfonamidates, have flexible binding modes offering a range of stable and reactive intermediates necessary for catalytic activity. Additionally, the simple form of these ligands leads to easily prepared proligands, along with facile tuning of steric and electronic factors. A sterically bulky titanium amidate complex has proven to be a leading catalyst for the selective formation of anti-Markovnikov addition products via intermolecular hydroamination of terminal alkynes, while sterically less demanding titanium pyridonates have opened the path to the selective formation of amine substituted cycloalkanes via the intramolecular hydroaminoalkylation of aminoalkenes over the competing hydroamination pathway. Sulfonamidates have boosted reactivity for hydrofunctionalization and polymerization reactions compared with amide ligands not bearing a sulfonyl group. N,O-Chelated titanium complexes have been used to synthesize ultrahigh molecular weight polyethylene and have been utilized in the challenging task of realizing equal incorporation of two different cyclic esters in a random ring-opening copolymerization. These discrete complexes have allowed for careful study of fundamental coordination chemistry and stoichiometric organometallic investigations. With inexpensive starting materials and modular ligands, titanium N,O-chelated complexes are well-suited to address the challenges of achieving greener chemical processes while accessing useful reaction manifolds for sustainable synthesis.

Sulfonamido tripods: tuning redox potentials via ligand modifications

A series of Fe^II-OH₂ complexes were synthesized with ligands based on the tetradentate sulfonamido tripod N,N',N"-[2,2',2"-nitrilotris(ethane-2,1-diyl)]-tris-({R-Ph}-sulfonamido). These complexes differ by the substituent on the aryl rings and were fully characterized, including their molecular structures via X-ray diffraction methods. All the complexes were five-coordinate with trigonal bipyramidal geometry. A linear correlation was observed between the electronic effects of each ligand, given by the Hammett constants of the para-substituents, and the potential of the Fe^II/Fe^III redox couple, which were determined using cyclic voltammetry. It was found that the range of redox potentials for the complexes spanned approximately 160 mV.

Zr(iv) complexes containing salan-type ligands: synthesis, structural characterization and role as catalysts towards the polymerization of ε-caprolactone, rac-lactide, ethylene, homopolymerization and copolymerization of epoxides with CO2

Three new Zr(iv) complexes bearing salan-type diamine bis(phenolato) ligands were synthesized and their activities towards the ROP of ε-CL, rac-LA and homopolymerization, copolymerization and coupling of epoxides with CO₂ were investigated.

Facilely synthesized benzotriazole phenolate zirconium complexes as versatile catalysts for copolymerization of carbon dioxide with cyclohexene oxide and lactide polymerization

New zirconium complexes bearing benzotriazole phenolate ligands were demonstrated to be versatile catalysts for CO₂/CHO copolymerization and lactide polymerization.

Titanium pyridonates for the homo- and copolymerization of rac-lactide and ε-caprolactone

A series of titanium pyridonate complexes have been synthesized under very mild reaction conditions from a common precursor, Ti(NMe₂)₄. These complexes have been explored as initiators for the ring-opening polymerization of rac-lactide and ε-caprolactone and have proven to be competitive with leading titanium initiators.

Monoamidinate titanium complexes: highly active catalysts for the polymerization and copolymerization of l-lactide and ε-caprolactone

A series of titanium trichloroamidinate complexes with distinct ligand sets showed different abilities in the copolymerization of ε-caprolactone and l-lactide, producing copolymers ranging from gradient to truly random microstructures.

Iron(II) complexes supported by sulfonamido tripodal ligands: endogenous versus exogenous substrate oxidation

High-valent iron species are known to act as powerful oxidants in both natural and synthetic systems. While biological enzymes have evolved to prevent self-oxidation by these highly reactive species, development of organic ligand frameworks that are capable of supporting a high-valent iron center remains a challenge in synthetic chemistry. We describe here the reactivity of an Fe(II) complex that is supported by a tripodal sulfonamide ligand with both dioxygen and an oxygen-atom transfer reagent, 4-methylmorpholine-N-oxide (NMO). An Fe(III)–hydroxide complex is obtained from reaction with dioxygen, while NMO gives an Fe(III)–alkoxide product resulting from activation of a C–H bond of the ligand. Inclusion of Ca²⁺ ions in the reaction with NMO prevented this ligand activation and resulted in isolation of an Fe(III)–hydroxide complex in which the Ca²⁺ ion is coordinated to the tripodal sulfonamide ligand and the hydroxo ligand. Modification of the ligand allowed the Fe(III)–hydroxide complex to be isolated from NMO in the absence of Ca²⁺ ions, and a C–H bond of an external substrate could be activated during the reaction. This study highlights the importance of robust ligand design in the development of synthetic catalysts that utilize a high-valent iron center.

Oxidation of an Fe(II) complex supported by a sulfonamido tripodal ligand was explored with dioxygen and an O-atom transfer reagent. While dioxygen gave an Fe(III)−hydroxido complex, the O-atom transfer reagent resulted in C−H activation of the ligand to form an Fe(III)−alkoxide species. Modification of the ligand prevented this ligand oxidation and allowed for activation of C−H bonds on an external substrate.

A tripodal benzylene-linked trisamidophosphine ligand scaffold: synthesis and coordination chemistry with group(IV) metals

A new tripodal trisamidophosphine ligand (1) based on the trisbenzylphosphine backbone has been synthesized in three steps starting from NaPH2 and phthaloyl-protected 2-aminobenzyl bromide. At elevated temperatures, 1 reacts directly with M(NMe2)4 (M = Zr, Hf) to afford the dimethylamido complexes [PN3]M(NMe2) (M = Zr, Hf) (2), which are easily converted into the corresponding triflates [PN3]MOTf (M = Zr, Hf) (3) via reaction with triethylsilyl trifluoromethanesulfonate. The related titanium chloro complex [PN3]TiCl (4-Ti) is obtained from 1 and Bn3TiCl via protonolysis. Triple deprotonation of 1 with n-butyllithium affords the tris-lithium salt Li3[PN3] (1-Li), which serves as a common starting material for the preparation of all the group(IV) chlorides [PN3]MCl (M = Ti, Zr, Hf) (4). Upon treatment of 4-Ti with Bn2Mg(thf)2, formation of a benzyltitanium species is observed, which is converted cleanly into a ligand-CH-activated species (5-Ti).

Heterobimetallic Complexes with MIII-(μ-OH)-MII Cores (MIII = Fe, Mn, Ga; MII = Ca, Sr, and Ba): Structural, Kinetic, and Redox Properties

The effects of redox-inactive metal ions on dioxygen activation were explored using a new FeII complex containing a tripodal ligand with 3 sulfonamido groups. This iron complex exhibited a faster initial rate for the reduction of O2 than its MnII analog. Increases in initial rates were also observed in the presence of group 2 metal ions for both the FeII and MnII complexes, which followed the trend NMe4+ < BaII < CaII = SrII. These studies led to the isolation of heterobimetallic complexes containing FeIII-(μ-OH)-MII cores (MII = Ca, Sr, and Ba) and one with a [SrII(OH)MnIII]+ motif. The analogous [CaII(OH)GaIII]+ complex was also prepared and its solid state molecular structure is nearly identical to that of the [CaII(OH)FeIII]+ system. Nuclear magnetic resonance studies indicated that the diamagnetic [CaII(OH)GaIII]+ complex retained its structure in solution. Electrochemical measurements on the heterobimetallic systems revealed similar one-electron reduction potentials for the [CaII(OH)FeIII]+ and [SrII(OH)FeIII]+ complexes, which were more positive than the potential observed for [BaII(OH)FeIII]+. Similar results were obtained for the heterobimetallic MnII complexes. These findings suggest that Lewis acidity is not the only factor to consider when evaluating the effects of group 2 ions on redox processes, including those within the oxygen-evolving complex of Photosystem II.