Enantioselectivity in the Iridium-Catalyzed Hydrogenation of Unfunctionalized Olefins

Asymmetric and Chemoselective Iridium Catalyzed Hydrogenation of Conjugated Unsaturated Oxime Ethers

Research on the chemoselective metal-catalyzed hydrogenation of conjugated π-systems has mostly been focussed on enones. Herein, we communicate the understudied asymmetric hydrogenation of enimines catalyzed by N,P-iridium complexes and chemoselective toward the alkene. A number of enoxime ethers underwent hydrogenation smoothly to yield the desired products in high yield and stereopurity (up to 99 % yield, up to 99 % ee). No hydrogenation of the C=N π-bond was observed under the applied reaction conditions (20 bar H2, rt, DCM). It was demonstrated that the chiral oxime ether could be hydrolyzed into the ketone with complete preservation of the installed stereogenity at the α-carbon. At last, a binding mode of the substrate to the active iridium catalyst and the consequence for the stereoselective outcome was proposed.

Unlocking the Asymmetric Hydrogenation of Tetrasubstituted Acyclic Enones

Asymmetric hydrogenation (AH) of tetrasubstituted olefins generating two stereocenters is still an open topic. There are only a few reports on the AH of tetrasubstituted olefins with conjugated functional groups, while this process can create useful intermediates for the subsequent elaboration of relevant end products. Most of the tetrasubstituted olefins successfully submitted to AH belong to a small number of functional classes; remarkably, the AH of tetrasubstituted acyclic enones still represents an unsolved challenge. Herein, we disclose a class of air-stable Ir-P,N catalysts, prepared in three steps from commercially available amino alcohols, that can hydrogenate, in minutes, a wide range of electronically and sterically diverse acyclic tetrasubstituted enones (including exocyclic ones) with high yields and high enantioselectivities. The factors responsible for the excellent selectivities were elucidated by combining deuterogenation experiments and theoretical calculations. The calculations indicated that the reduction follows an IrI /IrIII mechanism, in which enantioselectivity is controlled in the first migratory insertion of the hydride to the most electrophilic olefinic Cβ and the formation of the hydrogenated product via reductive elimination takes place prior to the coordination of dihydrogen and the subsequent oxidative addition. The potential of the new catalytic systems is demonstrated by the derivatization of hydrogenation products.

Iridium-Catalyzed Enantioselective Transfer Hydrogenation of 1,1-Dialkylethenes with Ethanol: Scope and Mechanism

Despite half a century's advance in the field of transition-metal-catalyzed asymmetric alkene hydrogenation, the enantioselective hydrogenation of purely alkyl-substituted 1,1-dialkylethenes has remained an unmet challenge. Herein, we describe a chiral PCNOx-pincer iridium complex for asymmetric transfer hydrogenation of this alkene class with ethanol, furnishing all-alkyl-substituted tertiary stereocenters. High levels of enantioselectivity can be achieved in the reactions of substrates with secondary/primary and primary/primary alkyl combinations. The catalyst is further applied to the redox isomerization of disubstituted alkenols, producing a tertiary stereocenter remote to the resulting carbonyl group. Mechanistic studies reveal a dihydride species, (PCNOx)Ir(H)2, as the catalytically active intermediate, which can decay to a dimeric species (κ3-PCNOx)IrH(μ-H)2IrH(κ2-PCNOx) via a ligand-remetalation pathway. The catalyst deactivation under the hydrogenation conditions with H2 is much faster than that under the transfer hydrogenation conditions with EtOH, which explains why the (PCNOx)Ir catalyst is effective for the transfer hydrogenation but ineffective for the hydrogenation. The suppression of di-to-trisubstituted alkene isomerization by regioselective 1,2-insertion is partly responsible for the success of this system, underscoring the critical role played by the pincer ligand in enantioselective transfer hydrogenation of 1,1-dialkylethenes. Moreover, computational studies elucidate the significant influence of the London dispersion interaction between the ligand and the substrate on enantioselectivity control, as illustrated by the complete reversal of stereochemistry through cyclohexyl-to-cyclopropyl group substitution in the alkene substrates.

The Effect of Conformational Freedom vs Restriction on the Rate in Asymmetric Hydrogenation: Iridium-Catalyzed Regio- and Enantioselective Monohydrogenation of Dienones

Transition metal-catalyzed asymmetric hydrogenation constitutes an efficient strategy for the preparation of chiral molecules. When dienes are subjected to hydrogenation, control over regioselectivity still presents a large challenge and the fully saturated alkane is often yielded. A few successful monohydrogenations of dienes have been reported, but hitherto these are only efficient for dienes comprised of two distinctly different olefins. Herein, the reactivity of a conjugated carbonyl compound as a function of their conformational freedom is studied, based on a combined experimental and theoretical approach. It was found that alkenes in the (s)-cis conformation experience a large rate acceleration while (s)-trans restrained alkenes undergo hydrogenation slowly. Ultimately, this reactivity aspect was exploited in a novel method for the monohydrogenation of dienes based on conformational restriction ((s)-cis vs (s)-trans). This mode of discrimination conceptually differs from existing monohydrogenations and dienones constructed of two olefins similar in nature could efficiently be hydrogenated to the chiral alkene (up to 99 % ee). The extent of regioselection is even powerful enough to overcome the conventional reactivity order of substituted olefins (di>tri>tetra). This high yielding and atom-economical protocol provides an interesting opportunity to instal a stereogenic center on a carbocycle, while leaving a synthetically useful alkene untouched.

Mechanistic Aspects of the Crabtree-Pfaltz Hydrogenation of Olefins - An Interplay of Experimentation and Quantum Chemical Computation

Introduction of Crabtree's iridium-based hydrogenation catalyst in 1977 marked a paradigm shift both with respect to the role of iridium in homogeneous catalysis as well as catalytic hydrogenation of olefins. In 1998, Pfaltz introduced an improved catalyst, by use of BARF- as anion, and established the first chiral variant of the Crabtree catalyst. This led to numerous practical highly enantioselective syntheses. Elucidation of mechanistic details posed great problems because of instability of the crucial intermediates. A remarkable breakthrough was achieved by Brandt, Andersson et al. in 2003, based on dft calculations. These authors replaced a previously assumed IrI /IrIII catalytic cycle by a novel IrIII /IrV cycle. The proposal was experimentally verified by Pfaltz in 2014 and corroborated by advanced quantum chemical calculations. This essay is an attempt to describe a fascinating interplay of experiments and quantum chemical calculations for an important synthetic method.

Axis-Unfixed Biphenylphosphine-Oxazoline Ligands: Design and Applications in Asymmetric Catalytic Reactions

The design and synthesis of chiral ligands plays an important role in asymmetric catalytic reactions. Over the past decades, various types of chiral phosphine-oxazolines (PHOX ligands) have been developed and have greatly advanced the field of asymmetric catalysis. Novel chiral PHOX ligand with an axis-unfixed biphenyl backbone, developed by our group, have shown interesting coordination behavior and excellent chiral inducing ability in various transition-metal-catalyzed asymmetric reactions. This personal account focuses on our developed axis-unfixed biphenylphosphine-oxazoline ligand (BiphPHOX), including an overview of its design and applications, which will provide inspiration for the exploration of novel ligands and related reactions.

Enantioselective Ir-Catalyzed Hydrogenation of Terminal Homoallyl Sulfones: Total Synthesis of (-)-Curcumene

A novel methodology for the preparation of chiral methyl benzylic compounds is reported. Terminal homoallyl sulfones were prepared from homoallyl alcohols, which are easily accessible through the recently reported Lewis acid isomerization of oxetanes. The iridium-catalyzed asymmetric hydrogenation of homoallylic sulfones afforded γ-chiral sulfones with excellent enantioselectivities (up to 98% ee). The synthetic potential of this novel methodology was demonstrated by the total synthesis of (R)-(-)-curcumene.

P-Stereogenic Ir-MaxPHOX: A Step toward Privileged Catalysts for Asymmetric Hydrogenation of Nonchelating Olefins

The Ir-MaxPHOX-type catalysts demonstrated high catalytic performance in the hydrogenation of a wide range of nonchelating olefins with different geometries, substitution patterns, and degrees of functionalization. These air-stable and readily available catalysts have been successfully applied in the asymmetric hydrogenation of di-, tri-, and tetrasubstituted olefins (ee's up to 99%). The combination of theoretical calculations and deuterium labeling experiments led to the uncovering of the factors responsible for the enantioselectivity observed in the reaction, allowing the rationalization of the most suitable substrates for these Ir-catalysts.

The Implications of the Brønsted Acidic Properties of Crabtree-Type Catalysts in the Asymmetric Hydrogenation of Olefins

Chiral iridium complexes derived from Crabtree's catalyst are highly useful in modern hydrogenations of olefins attributed to high reactivity, stereoselectivity, and stability. Despite that these precatalysts are pH neutral, the reaction mixtures turn acidic under hydrogenation conditions. This Perspective is devoted to the implications of the intrinsic Brønsted acidity of catalytic intermediates in asymmetric hydrogenation of olefins. Despite that the acidity has often been used only as a rationale for side-product formation, more recent methodologies have started to use this property advantageously. We hope that this Perspective serves as a stimulant for the development of such compelling and new asymmetric hydrogenations. The inherent scientific opportunities in utilizing or annihilating the generated Brønsted acid are enormous, and potential new innovations are outlined toward the end.

Stereoselective Iridium-N,P-Catalyzed Double Hydrogenation of Conjugated Enones to Saturated Alcohols

Asymmetric hydrogenation of prochiral substrates such as ketones and olefins constitutes an important instrument for the construction of stereogenic centers, and a multitude of catalytic systems have been developed for this purpose. However, due to the different nature of the π-system, the hydrogenation of olefins and ketones is normally catalyzed by different metal complexes. Herein, a study on the effect of additives on the Ir-N,P-catalyzed hydrogenation of enones is described. The combination of benzamide and the development of a reactive catalyst unlocked a novel reactivity mode of Crabtree-type complexes toward C=O bond hydrogenation. The role of benzamide is suggested to extend the lifetime of the dihydridic iridium intermediate, which is prone to undergo irreversible trimerization, deactivating the catalyst. This unique reactivity is then coupled with C=C bond hydrogenation for the facile installation of two contiguous stereogenic centers in high yield and stereoselectivity (up to 99% ee, 99/1 d.r.) resulting in a highly stereoselective reduction of enones.

Synthesis of Chiral Tetrahydro-3-benzazepine Motifs by Iridium-Catalyzed Asymmetric Hydrogenation of Cyclic Ene-carbamates

A highly efficient N,P-ligated iridium complex is presented for the simple preparation of chiral tetrahydro-3-benzazepine motifs by catalytic asymmetric hydrogenation. Substrates bearing both 1-aryl and 1-alkyl substituents were smoothly converted to the corresponding hydrogenated product with excellent enantioselectivity (91-99% ee) and in isolated yield (92-99%). The synthetic value of this transformation was demonstrated by a gram-scale hydrogenation and application in the syntheses of trepipam and fenoldopam.

Ir(IV) Sulfoxide-Pincer Complexes by Three-Electron Oxidative Additions of Br2 and I2. Unprecedented Trap-Free Reductive Elimination of I2 from a formal d5 Metal

Oxidative addition of 1.5 equiv of bromine or iodine to a Ir(I) sulfoxide pincer complex affords the corresponding Ir(IV) tris-bromido or tris-iodido complexes, respectively. The unprecedented trap-free reductive elimination of iodine from the Ir(IV)-iodido complex is induced by coordination of ligands or donor solvents. In the case of added I^-, the isostructural tris-iodo Ir(III)-ate complex is quickly generated, which then can be readily reoxidized to the Ir(IV)-iodido complex with FcPF₆ or electrochemically. DFT calculations indicate an "inverted ligand field" in the Ir(IV) complexes and favor dinuclear pathways for the reductive elimination of iodine from the formal d⁵ metal center.

Iridium-catalyzed enantioconvergent hydrogenation of trisubstituted olefins

Asymmetric hydrogenation of olefins constitutes a practical and efficient method to introduce chirality into prochiral substrates. However, the absolute majority of the developed methodologies is enantiodivergent and thus require isomerically pure olefins which is a considerable drawback since most olefination strategies produce (E/Z)-mixtures. Although some advances have been reported, a general enantioconvergent hydrogenation featuring a broad functional group tolerance remains elusive. Here, we report the development of a general iridium-catalyzed enantioconvergent hydrogenation of a broad range of functionalized trisubstituted olefins. The substitution pattern around the olefin is critical; whereas α-prochiral olefins can undergo an enantioconvergent hydrogenation, β-prochiral olefins react in an enantiodivergent manner. The presented methodology hydrogenates α-prochiral substrates with excellent control of enantioselection and high isolated yields. Most importantly, both isomerically pure alkenes as well as isomeric mixtures can be hydrogenated to yield the same major enantiomer in excellent enantiomeric excesses which is unusual in transition-metal catalyzed asymmetric hydrogenations.

Usually asymmetric hydrogenation of olefins is enantiodivergent and thus requires isomerically pure olefins, which is a considerable drawback. Here, the authors show a general iridium-catalyzed enantioconvergent hydrogenation of a broad range of functionalized trisubstituted olefins.

Combined Theoretical and Experimental Studies Unravel Multiple Pathways to Convergent Asymmetric Hydrogenation of Enamides

We present a highly efficient convergent asymmetric hydrogenation of E/Z mixtures of enamides catalyzed by N,P-iridium complexes supported by mechanistic studies. It was found that reduction of the olefinic isomers (E and Z geometries) produces chiral amides with the same absolute configuration (enantioconvergent hydrogenation). This allowed the hydrogenation of a wide range of E/Z mixtures of trisubstituted enamides with excellent enantioselectivity (up to 99% ee). A detailed mechanistic study using deuterium labeling and kinetic experiments revealed two different pathways for the observed enantioconvergence. For α-aryl enamides, fast isomerization of the double bond takes place, and the overall process results in kinetic resolution of the two isomers. For α-alkyl enamides, no double bond isomerization is detected, and competition experiments suggested that substrate chelation is responsible for the enantioconvergent stereochemical outcome. DFT calculations were performed to predict the correct absolute configuration of the products and strengthen the proposed mechanism of the iridium-catalyzed isomerization pathway.

Site- and Enantioselective Iridium-Catalyzed Desymmetric Mono-Hydrogenation of 1,4-Dienes

The control of site selectivity in asymmetric mono-hydrogenation of dienes or polyenes remains largely underdeveloped. Herein, we present a highly efficient desymmetrization of 1,4-dienes via iridium-catalyzed site- and enantioselective hydrogenation. This methodology demonstrates the first iridium-catalyzed hydrogenative desymmetriation of meso dienes and provides a concise approach to the installation of two vicinal stereogenic centers adjacent to an alkene. High isolated yields (up to 96 %) and excellent diastereo- and enantioselectivities (up to 99:1 d.r. and 99 % ee) were obtained for a series of divinyl carbinol and divinyl carbinamide substrates. DFT calculations reveal that an interaction between the hydroxy oxygen and the reacting hydride is responsible for the stereoselectivity of the desymmetrization of the divinyl carbinol. Based on the calculated energy profiles, a model that simulates product distribution over time was applied to show an intuitive kinetics of this process. The usefulness of the methodology was demonstrated by the synthesis of the key intermediates of natural products zaragozic acid A and (+)-invictolide.

Reducing Challenges in Organic Synthesis with Stereoselective Hydrogenation and Tandem Catalysis

Tandem catalysis enables the rapid construction of complex architectures from simple building blocks. This Perspective shares our interest in combining stereoselective hydrogenation with transformations such as isomerization, oxidation, and epimerization to solve diverse challenges. We highlight the use of tandem hydrogenation for preparing complex natural products from simple prochiral building blocks and present tandem catalysis involving transfer hydrogenation and dynamic kinetic resolution. Finally, we underline recent breakthroughs and opportunities for asymmetric hydrogenation.

Kinetic resolution of racemic allylic alcohols via iridium-catalyzed asymmetric hydrogenation: scope, synthetic applications and insight into the origin of selectivity

Asymmetric hydrogenation is one of the most commonly used tools in organic synthesis, whereas, kinetic resolution via asymmetric hydrogenation is less developed. Herein, we describe the first iridium catalyzed kinetic resolution of a wide range of trisubstituted secondary and tertiary allylic alcohols. Large selectivity factors were observed in most cases (s up to 211), providing the unreacted starting materials in good yield with high levels of enantiopurity (ee up to >99%). The utility of this method is highlighted in the enantioselective formal synthesis of some bioactive natural products including pumiliotoxin A, inthomycin A and B. DFT studies and a selectivity model concerning the origin of selectivity are presented.

Asymmetric hydrogenation is one of the most commonly used tools in organic synthesis, whereas, kinetic resolution via asymmetric hydrogenation was less developed.

Iridium-Catalyzed Enantioselective Hydrogenation of Indole and Benzofuran Derivatives

Enantioselective hydrogenation of a broad spectrum of N-, O-, and S-containing aromatic benzoheterocycles or nonaromatic unsaturated heterocycles has been realized by using an Ir/SpinPHOX (SpinPHOX=spiro[4,4]-1,6-nonadiene-based phosphine-oxazoline) complex as the catalyst, affording an array of the corresponding chiral benzoheterocycles (30 examples) with excellent enantioselectivities (>99 % ee in most cases) and turnover numbers up to 500.

Asymmetric synthesis of 1,2-fluorohydrin: iridium catalyzed hydrogenation of fluorinated allylic alcohol

We have developed a simple protocol for the preparation of 1,2-fluorohydrin by asymmetric hydrogenation of fluorinated allylic alcohols using an efficient azabicyclo thiazole-phosphine iridium complex. The iridium-catalyzed asymmetric synthesis of chiral 1,2-fluorohydrin molecules was carried out at ambient temperature with operational simplicity, and scalability. This method was compatible with various aromatic, aliphatic, and heterocyclic fluorinated compounds as well as a variety of polyfluorinated compounds, providing the corresponding products in excellent yields and enantioselectivities.

Strategy Used to Control the Mechanism of Homogeneous Alkyne/Olefin Hydrogenation: AIMD Simulations and DFT Calculations

Understanding the mechanism of the catalytic reaction is an effective way to design new high-performance catalysts. The mechanisms of alkyne/olefin hydrogenations catalyzed by a nonclassical Co-N₂ catalyst are explored by ab initio molecular dynamics simulations and density functional theory calculations. From the calculated results, the hydrogenation mechanisms, i.e., molecular or atomic mechanisms, can be effectively controlled via employing the different interaction between the catalyst and substrates. The origination of excellent selectivity toward E-olefins for the Co-N₂ catalyst is also taken into account with the help of investigating the olefin hydrogenation process. The mechanism indicates that the negligible energy barrier of rotation is the main reason for highly selective semihydrogenation of a Co-N₂ catalyst, which leads to the trans-olefin formation. These investigations may provide some useful information and guidelines on the current understanding of the hydrogenation reaction and designing the high-performance catalysts.

Enantioconvergent and enantiodivergent catalytic hydrogenation of isomeric olefins

The asymmetric catalytic hydrogenation of olefins is one of the most widely studied and utilised transformations in asymmetric synthesis. This straightforward and atom-economical strategy can provide excellent enantioselectivity for a broad variety of substrates and is widely relevant for both industrial applications and academic research. In many instances the hydrogenation is stereospecific in the regard that the E-Z-geometry of the olefin governs the stereochemistry of the hydrogenation, producing an enantiodivergent outcome. Interestingly, the possibility to hydrogenate E- and Z-isomer mixtures to a single stereoisomer in an enantioconvergent manner has been reported. This avoids the need for synthesis of geometrically pure alkene starting materials and therefore constitutes a significant practical advantage. This review article aims to provide an overview of the different stereochemical outcomes in the hydrogenation of olefins. Although the field is well developed and selectivity models have been proposed for a number of catalytic systems, an organized collection of enantioconvergent results, as opposed to the more common enantiodivergent case, might promote new investigation into these phenomena.

Asymmetric Hydrogenation of Unfunctionalized Tetrasubstituted Acyclic Olefins

Asymmetric hydrogenation has evolved as one of the most powerful tools to construct stereocenters. However, the asymmetric hydrogenation of unfunctionalized tetrasubstituted acyclic olefins remains the pinnacle of asymmetric synthesis and an unsolved challenge. We report herein the discovery of an iridium catalyst for the first, generally applicable, highly enantio- and diastereoselective hydrogenation of such olefins and the mechanistic insights of the reaction. The power of this chemistry is demonstrated by the successful hydrogenation of a wide variety of electronically and sterically diverse olefins in excellent yield and high enantio- and diastereoselectivity.

Ir-Catalyzed Double Asymmetric Hydrogenation of 3,6-Dialkylidene-2,5-diketopiperazines for Enantioselective Synthesis of Cyclic Dipeptides

An Ir/spiro[4,4]-1,6-nonadiene-based phosphine-oxazoline ligand (SpinPHOX) complex-catalyzed double asymmetric hydrogenation of 3,6-dialkylidene-1,4-dimethylpiperazine-2,5-diones has been developed, providing efficient and practical access to a wide variety of chiral 3,6-disubstituted-2,5-diketopiperazines in high yields with exclusive cis-diastereo- and excellent enantioselectivities (>99% de, up to 98% ee). The synthetic utilities of the protocol have been demonstrated in a gram scale synthesis of 6a and efficient construction of chiral products 8, 14, and 17 as well as a 2-butenyl-bridged bicyclic diketopiperazine 10 and hydroxydiketopiperazine 11. With an analogous achiral Ir catalyst, the hydrogenation of enantiopure monohydrogenated intermediate 7a gave cis-6a as the only product, indicating that the second-step hydrogenation of the titled transformation is a chiral substrate controlled process. The reaction profile study for asymmetric hydrogenation (AH) of 5a revealed that the concentration of the monohydrogenation intermediate 7a remained at a low level (<8%) during the course of hydrogenation. The hydrogenation of 5a to 6a proceeded significantly faster than that of its half-hydrogenated intermediate ( S)-7a, indicating that the titled reaction involves primarily a processive mechanism, in which a single catalyst molecule performs consecutive hydrogenation of the two C═C double bonds in substrate 5a without dissociation of the partially reduced 7a. The present protocol represents a rare example of asymmetric catalytic consecutive hydrogenation of heterocycles and provides an alternative way for efficient construction of cyclic dipeptides.