Living 3,4-Polymerization of Isoprene by Cationic Rare Earth Metal Alkyl Complexes Bearing Iminoamido Ligands

Theoretical investigations of 2-vinylpyridine stereoselective polymerization catalyzed by cationic yttrium complexes with different ancillary ligands

The polymerization mechanism of 2-vinylpyridine catalyzed by cationic yttrium complexes with diverse ancillary ligands, specifically [L1Y(CH2SiMe3)(THF)]+ [L1 = (2,6-Et2C6H3)NC(Me)CHC(Me)N(2,6-Et2C6H3)] (Y-1), [L2Y(CH2SiMe3)(THF)]+ [L2 = (2,6-Cl2C6H3)NC(Me)CHC(Me)N(2,6-Cl2C6H3)] (Y-2), and [L3Y(CH2SiMe3)(THF)]+ [L3 = (2,6-C6H5)NC(Me)CHC(Me)N(2,6-iPr2C6H3)] (Y-3), was studied using density functional theory (DFT) calculations. Having achieved an agreement between theory and experiment, it is found that isotactic selectivity induced by Y-1 or Y-2 results from a combination of smaller deformation of the catalyst and stronger electronic effects. Conversely, the Y-3 complex exhibits comparable energy barriers for proceeding via either isotactic or syndiotactic pathways, aligning with the production of atactic polymers as seen experimentally. To examine the steric effects on the kinetic and thermodynamic properties, a computational model of an analogue complex [L4Y(CH2SiMe3)(THF)]+ [L4 = (2,6-Cl2C6H3)NC(Me)CHC(Me)N(iPr2C6H3)] (Y-4), featuring increased steric hindrance, was analyzed. Distortion-interaction and topographic steric map analyses further affirmed that steric hindrance significantly influences stereoselectivity. A direct relationship was identified between the energy barriers of isotactic insertion transition states and the bulkiness of ancillary ligands; greater distortion energy of the catalyst correlates with higher barriers for isotactic polymerization. These findings enhance the mechanistic comprehension of 2-vinylpyridine polymerization and are expected to contribute valuable insights for the improvement of catalytic polymerization systems of 2-vinylpyridine.

Controlled, one-pot synthesis of recyclable poly(1,3-diene)-polyester block copolymers, catalyzed by yttrium β-diketiminate complexes

The one-pot synthesis of well-defined block copolymers of olefins/1,3-dienes and polar monomers, such as cyclic esters and acrylates has long been the focus of intense research. Cationic alkyl rare earth metal catalysts, activated by organoborates, have shown to be promising for the polymerization of isoprene or styrene and ε-caprolactone. In this study, we synthesize a series of yttrium bis(alkyl) complexes supported by simple β-diketiminate ancillary ligands. Subtle changes have been made to the β-diketiminate ligand framework to elucidate the effect of ligand structure on the rate and selectivity of olefin/1,3-diene and cyclic ester polymerization, with small ligand changes having a large impact on the resulting polymerizations. Generation of the active cationic species was easily streamlined by identification of appropriate catalyst : organoborate ratios, allowing for high catalyst efficiencies. Notably, we demonstrate the first cationic rare earth metal alkyl-initiated polymerization of δ-valerolactone and ε-decalactone as well as introduced five new block copolymer morphologies. In addition, selective degradation of the ester block in poly(isoprene-b-caprolactone) enabled recovery of the polyisoprene block with identical spectroscopic and thermal properties. Significantly, recopolymerization of the recovered poly(1,3-diene) with fresh ε-caprolactone reproduced the desired diblocks with nearly identical thermal and physical properties to those of virgin copolymer, illustrating a plausible recycling scheme for these materials.

Ligand features that promote one-pot block copolymerization of 1,3-dienes and cyclic esters were realized with yttrium β-diketiminate complexes. Depolymerization and repolymerization of the polyester block introduced a plausible recycling strategy.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.

Perfectly isoselective polymerization of 2-vinylpyridine promoted by β-diketiminato rare-earth metal cationic complexes

Highly isotactic poly(2-vinylpyridine)s were produced with rare-earth metal complexes supported by a symmetric β-diketiminate ligand in the presence of borate.

Cis-1,4-Polymerization of Isoprene by 1,3-Bis(oxazolinymethylidene)isoindoline-Ligated Rare-Earth Metal Dialkyl Complexes

A series of novel chiral nonmetallocene pincer-type rare-earth metal dialkyl complexes bearing the chiral monoanionic tridentate C₂-symmetric 1,3-bis(oxazolinymethylidene)isoindoline (BOXMI-H) ligand (BOXMI)Ln(CH₂SiMe₃)₂ 1⁻3 (1: Ln = Sc, yield = 57%; 2: Ln = Lu, yield = 55%; 3: Ln = Y, yield = 62%) have been prepared in moderate yields via the acid-base reaction between the BOXMI ligand and rare-earth metal tri(trimethylsilylmethyl) complexes. The X-ray diffractions show that both of the complexes 1 and 2 contain one BOXMI ligand and two trimethylsilylmethyl ligands, adopting a distorted trigonal bipyramidal configuration. In the presence of a cocatalyst such as borate and AlR₃, these complexes 1⁻3 exhibit high activities of up to 6.8 × 10⁴ (g of polymer)/(molLn h) and high cis-1,4 selectivities of up to 97% in the polymerization of isoprene in toluene, yielding the cis-1,4-polyisoprenes with heavy molecular weights (Mn of up to 710,000 g/mol) and bimodal molecular weight distributions (Mw/Mn = 2.0⁻4.5).

Synthesis, structure and reactivity of guanidinate rare earth metal bis(o-aminobenzyl) complexes

A series of guanidinate rare-earth dialkyl complexes were synthesized. Their reactivity towards small molecules has been disclosed.

In situ X-ray absorption fine structure study on the polymerization of isoprene assisted by Nd-based ternary catalysts

Polymerization processes of isoprene catalyzed by four catalysts with different alkylaluminums were detected by in situ XAFS technique. The catalytic mechanism of the neodymium-based ternary catalyst was discussed based on the structure information.

Palladium-catalyzed C(sp3)–C(sp2) cross-coupling of homoleptic rare-earth metal trialkyl complexes with aryl bromides: efficient synthesis of functionalized benzyltrimethylsilanes

The first C(sp³)–C(sp²) cross-coupling of rare-earth metal alkyl complexes with aryl bromides has been developed for an efficient synthesis of benzyltrimethylsilanes with diverse functional groups.

Bis(alkyl) rare-earth complexes coordinated by bulky tridentate amidinate ligands bearing pendant Ph2PO and Ph2PNR groups. Synthesis, structures and catalytic activity in stereospecific isoprene polymerization

Replacement of Ph₂PO group by Ph₂PNPh leads to a switch of stereoselectivity from cis-1,4 to trans-1,4.

Bis(amido) rare-earth complexes coordinated by tridentate amidinate ligand: synthesis, structure and catalytic activity in the polymerization of isoprene and rac-lactide

Rare-earth bis(amides) {2-[Ph₂Р(O)]C₆H₄NC(tBu)N(2,6-Me₂C₆H₃)}Ln(N(SiMe₃)₂)₂ (Ln = Y, Nd, La) coordinated by tridentate amidinate ligand were synthesized, structurally characterized and evaluated as catalysts for isoprene and rac-lactide polymerizations.

Cyclometalation and coupling of a rigid 4,5-bis(imino)acridanide pincer ligand on yttrium

An extremely rigid NNN-donor proligand, 4,5-bis{(diphenylmethylene)amino}-2,7,9,9-tetramethylacridan, H[AIm2] was prepared in five steps starting from 5-methyl-2-aminobenzoic acid and 4-bromotoluene. Reaction of intensely orange H[AIm2] with LiCH2SiMe3 formed deep blue Li(x)[AIm2]x (x = 2 in the solid state), while reaction with [Y(CH2SiMe3)3(THF)2] (0.5 equiv.) afforded deep blue [Y(AIm2)(AIm)] (1; AIm = an AIm2 ligand cyclometalated at the ortho-position of one of the phenyl rings). Compound 1 slowly isomerizes to form green-brown 2, which contains a single trianionic, hexadentate ligand that features one amine, two imine, and three amido donors. The acridanide backbone and one imine group in each of the original AIm2 ligands is intact, but the two acridanide backbones are now linked by an isoindoline heterocycle. Yttrium in 2 is coordinated to six nitrogen donors and the ortho carbon of an isoindoline phenyl substituent. The intense colours of H[AIm2], Li(x)[AIm2]x and 1 were shown by TD-DFT calculations to arise from charge transfer transitions from the HOMO, which is localized on the acridanide ligand backbone, to the LUMO and LUMO+1, which are localized on the imine substituents. The conversion of 1 to 2 was studied by UV-Visible absorption spectroscopy and is first-order with a half-life of 7.8 hours at room temperature.

Local structure analysis around the Nd center in a ternary catalyst comprising Nd(vers)3, Al((i)Bu)3 and Al((i)Bu)2Cl by XAFS

Lanthanide-based catalysts are highly active for isoprene polymerization in hexane. In this paper, a ternary catalyst consisting of neodymium neodecanoate {Nd(vers)3}, Al((i)Bu)3 and Al((i)Bu)2Cl was studied by using X-ray-absorption fine-structure (XAFS) technique. A sealed and moisture-proof liquid sample cell with adjustable thickness was designed for Nd LIII-edge XAFS measurements. Based on the XAFS data analysis, detailed structure changes around the Nd center were obtained. It was found that the Nd(vers)3 molecules formed an oligomer structure in hexane solution with two Nd-O subshells (5O @ 2.39 Å and 5O @ 2.54 Å) around the Nd center. The alkylation process by adding Al((i)Bu)3 to the hexane solution of Nd(vers)3 partially destroyed the aggregation degree of Nd(vers)3 molecules in hexane solution. Al((i)Bu)3 ligands were bonded to the Nd center by Nd-C bonding. With the Nd : Al ratio increasing from 1 : 2.5 to 1 : 10, the O neighbors around Nd decreased from 4 to 2 but with an unchanged Nd-O bond length of 2.38 Å, and the C neighbors around Nd were kept at ca. 4 with Nd-C bond lengths in the range of 2.57-2.58 Å. The Nd-O bonds can be further replaced by Nd-C bonds during the aging process. The chlorination process by adding Al((i)Bu)2Cl to the mixture solution of Nd(vers)3 and Al((i)Bu)3 restrained intensively the agglomeration of Nd(vers)3 molecules in hexane solution. Al((i)Bu)2Cl ligands were bonded to the Nd center by Nd-Cl bonds. There were about 3-4 C neighbors at 2.58 Å, 2 Cl neighbors at 2.87 Å, and 2 Al next-neighbors at 3.14 Å around the Nd center. After allowing the ternary catalyst to stand for 5 days, the coordination numbers of Nd-C and Nd-Cl were all stabilized to 3 without bond length changes, and partial single Cl(-) anions were also bonded to the Nd center. All these structural details and their change tendency demonstrate that the decrease of aggregation degree of Nd(vers)3 molecules in hexane solution can improve the catalytic activity of the ternary lanthanide-based catalyst system.

Carbon bridged triphenolate lanthanide complexes: synthesis, characterization, DFT studies and catalytic activities for isoprene polymerization

Lanthanide complexes supported by carbon bridged triphenolate ligands were synthesized and theoretical calculations were carried out on a Lu complex.

Bis(phenolate)amine-supported lanthanide borohydride complexes for styrene and trans-1,4-isoprene (co-)polymerisations

New bis(phenolate)amine-supported neodymium borohydride complexes and their previously reported samarium analogues were tested as catalysts for the polymerisation of styrene and isoprene.

Bis(alkyl) rare-earth complexes supported by a new tridentate amidinate ligand with a pendant diphenylphosphine oxide group. Synthesis, structures and catalytic activity in isoprene polymerization

The introduction of a pendant Ph₂P(O) group into an amidinate ligand resulted in high 1,4-cis selectivity (96.6%) while maintaining very high activity.