UI4(1,4-dioxane)2, [UCl4(1,4-dioxane)]2, and UI3(1,4-dioxane)1.5: Stable and Versatile Starting Materials for Low- and High-Valent Uranium Chemistry

Two Mn(II)-Bridged Silverton-Type [UMo12O42]8- Polyoxometalates with Catalytic Activity for the Synthesis of Pyrazoles

Two Mn(II)-bridged Silverton-type {UMo12O42}-based polyoxomolybdates with different three-dimensional structures, Na6(H2O)12[Mn(UMo12O42)] (NaMn) and (NH4)2[K2Na6(μ4-O)2(H2O)1.2Mn(UMo12O42)]·4.6H2O (KMn), were hydrothermally synthesized and further characterized, demonstrating a feasible strategy for the assembly of Silverton-type polyoxomolybdates. Additionally, NaMn is demonstrated to be a good heterogeneous catalyst in the condensation cyclization reaction of hydrazines and 1,3-diketones, and a range of valuable pyrazoles were produced in up to 99% yield.

Comparison of the structural, electrochemical, and spectroscopic properties of two cryptates of trivalent uranium

We describe a study of the influence of cryptand denticity on the structural, electronic, and electrochemical properties of UIII-containing cryptates. Two cryptands (2.2.2 and 2.2.1) are reported. The cryptand with the smaller denticity leads to negative electrochemical potentials and shorter bond lengths that are consistent with a better fit for UIII than the larger cryptand. These studies provide insight into the rational design of cryptand-based ligands for trivalent uranium.

Trends in Structure and Ethylene Polymerization Reactivity of Transition-Metal Permethylindenyl-phenoxy (PHENI*) Complexes

A family of ansa-permethylindenyl-phenoxy (PHENI*) transition-metal chloride complexes has been synthesized and characterized (1-7; {(η5-C9Me6)Me(R″)Si(2-R-4-R'-C6H2O)}MCl2; R,R' = Me, tBu, Cumyl (CMe2Ph); R″ = Me, nPr, Ph; M = Ti, Zr, Hf). The ancillary chloride ligands could readily be exchanged with halides, alkyls, alkoxides, aryloxides, or amides to form PHENI* complexes [L]TiX2 (8-17; X = Br, I, Me, CH2SiMe3, CH2Ph, NMe2, OEt, ODipp). The solid-state crystal structures of these PHENI* complexes indicate that one of two conformations may be preferred, parametrized by a characteristic torsion angle (TA'), in which the η5 system is either disposed away from the metal center or toward it. Compared to indenyl PHENICS complexes, the permethylindenyl (I*) ligand appears to favor a conformation in which the metal center is more accessible. When heterogenized on solid polymethylaluminoxane (sMAO), titanium PHENI* complexes exhibit exceptional catalytic activity toward the polymerization of ethylene. Substantially greater activities are reported than for comparable PHENICS catalysts, along with the formation of ultrahigh-molecular-weight polyethylenes (UHMWPE). Catalyst-cocatalyst ion pairing effects are observed in cationization experiments and found to be significant in homogeneous catalytic regimes; these effects are also related to the influence of the ancillary ligand leaving groups in slurry-phase polymerizations. Catalytic efficiency and polyethylene molecular weight are found to increase with pressure, and PHENI* catalysts can be categorized as being among the most active for the controlled synthesis of UHMWPE.

Laser-Induced Thermal Decomposition of Uranium Coordination Compounds with Non-oxidic Ligands to Produce Nitride and Carbide Materials

The production of ceramics from uranium coordination compounds can be achieved through thermal processing if an excess amount of the desired atoms (i.e., C or N), or reactive gaseous products (e.g., methane or nitrogen oxide) is made available to the reactive uranium metal core via decomposition/fragmentation of the surrounding ligand groups. Here, computational thermodynamic approaches were utilized to identify the temperatures necessary to produce uranium metal from some starting compounds─UI4(TMEDA)2, UCl4(TMEDA)2, UCl3(pyridine)x, and UI3(pyridine)4. Experimentally, precursors were irradiated by a laser under various gaseous environments (argon, nitrogen, and methane) creating extreme reaction conditions (i.e., fast heating, high temperature profile >2000 °C, and rapid cooling). Despite the fast dynamics associated with laser irradiation, the central uranium atom reacted with the thermal decomposition products of the ligands yielding uranium ceramics. Residual gas analysis identified vaporized products from the laser irradiation, and the final ceramic products were characterized by powder X-ray diffraction. The composition of the uranium precursor as well as the gaseous environment had a direct impact on the production of the final phases.

Molybdenum sulphide clusters as redox-active supports for low-valent uranium

The preparation of an actinide substituted cubane cluster, (Cp*3Mo3S4)Cp*UI2, and its reduced derivatives are reported. Structural and spectroscopic investigations provide insight into the unique interactions between the actinide and its redox-active molybdenum sulphide metalloligand, serving as a model to study atomically-dispersed, low-valent actinide ions on MoS2 surfaces. To probe the ability of the assembly to facilitate multielectron small molecule activation, the reactivity of the fully-reduced cluster, (Cp*3Mo3S4)Cp*U, with azobenzene was investigated. Addition of the substrate results in the formation of a cis-bis-imido cluster, (Cp*3Mo3S4)Cp*U(NPh)2. Cooperative reactivity between the actinide and redox-active support facilitates the 4e--reduction of substrate.

Stabilization of Pu(IV) in PuBr4(OPCy3)2 and Comparisons with Structurally Similar ThX4(OPR3)2 (R = Cy, Ph) Molecules

The pursuit of a trivalent plutonium halide phosphine oxide compound, e.g., "PuBr3(OPR)3," instead led to the isolation of the tetravalent trans-PuIVBr4(OPCy3)2, PuBr/Cy, compound by spontaneous oxidation of PuIII. The donating nature of phosphine oxides has allowed the isolation and characterization of PuBr/Cy by crystallographic, multinuclear NMR, solid state, and solution phase UV-vis-NIR spectroscopic techniques. The presence of a putative plutonyl(VI) complex formulated as "trans-PuVIO2Br2(OPCy3)2" was also observed spectroscopically and tentatively by single-crystal X-ray diffraction as a cocrystal of PuBr/Cy. A series of trans-ThX4(OPCy3)2 (X = Cl, ThCl/Cy; Br, ThBr/Cy; I, ThI/Cy) complexes were synthesized for comparison to PuBr/Cy. The triphenylphosphine oxide, OPPh3, complexes, trans-AnI4(OPPh3)2 (An = Th, ThI/Ph; U, UI/Ph), were also synthesized for comparison, completing the series trans-UX4(OPPh3)2 (X = Cl, Br, I), UX/Ph. To enable the synthesis of ThI/Cy and ThI/Ph, a new nonaqueous thorium iodide starting material, ThI4(Et2O)2, was synthesized. The syntheses of organic solvent soluble ThI4L2 (L = Et2O, OPCy3, and OPPh3) are the first examples of crystallographically characterized neutral thorium tetraiodide materials beyond binary ThI4. To show the viability of ThI4(Et2O)2 as a starting material for organothorium chemistry, (C5Me4H)3ThI was synthesized and crystallographically characterized.

Chlorination of Pu and U Metal Using GaCl3

The oxidative chlorination of the plutonium metal was achieved through a reaction with gallium(III) chloride (GaCl3). In DME (DME = 1,2-dimethoxyethane) as the solvent, substoichiometric (2.8 equiv) amounts of GaCl3 were added, which consumed roughly 60% of the plutonium metal over the course of 10 days. The salt species [PuCl2(dme)3][GaCl4] was isolated as pale-purple crystals, and both solid-state and solution UV-vis-NIR spectroscopies were consistent with the formation of a trivalent plutonium complex. The analogous reaction was performed with uranium metal, generating a dicationic trivalent uranium complex crystallized as the [UCl(dme)3][GaCl4]2 salt. The extraction of [UCl(dme)3][GaCl4]2 in DME at 70 °C followed by crystallization produced [{U(dme)3}2(μ-Cl3)][GaCl4]3, a product arising from the loss of GaCl3. This method of halogenation worked on a small scale for plutonium and uranium, providing a route to cationic Pu3+ and dicationic U3+ complexes using GaCl3 in DME.

Ligand Control of Oxidation and Crystallographic Disorder in the Isolation of Hexavalent Uranium Mono-Oxo Complexes

The development of high-valent transuranic chemistry requires robust methodologies to access and fully characterize reactive species. We have recently demonstrated that the reducing nature of imidophosphorane ligands supports the two-electron oxidation of U⁴⁺ to U⁶⁺ and established the use of this ligand to evaluate the inverse-trans-influence (ITI) in actinide metal-ligand multiple bond (MLMB) complexes. To extend this methodology and analysis to transuranic complexes, new small-scale synthetic strategies and lower-symmetry ligand derivatives are necessary to improve crystallinity and reduce crystallographic disorder. To this end, the synthesis of two new imidophosphorane ligands, [N═P^tBu(pip)₂]^- (NPC¹) and [N═P^tBu(pyrr)₂]^- (NPC²) (pip = piperidinyl; pyrr = pyrrolidinyl), is presented, which break pseudo-C₃ axes in the tetravalent complexes, U[NPC¹]₄ and U[NPC²]₄. The reaction of these complexes with two-electron oxygen-atom-transfer reagents (N₂O, trimethylamine N-oxide (TMAO) and 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene (dbabhNO)) yields the U⁶⁺ mono-oxo complexes U(O)[NPC¹]₄ and U(O)[NPC²]₄. This methodology is optimized for direct translation to transuranic elements. Of the two ligands, the NPC² framework is most suitable for facilitating detailed bonding analysis and assessment of the ITI. Theoretical evaluation of the U-(NPC) bonding confirms a substantial difference between axially and equatorially bonded N atoms, revealing markedly more covalent U-N_ax interactions. The U 6d + 5f combined contribution for U-N_ax is nearly double that of U-N_eq, accounting for ITI shortening and increased bond order of the axial bond. Two distinct N-atom hybridizations in the pyrrolidine/piperidine rings are noted across the complexes, with approximate sp² and sp³ configurations describing the slightly shorter P-N_"planar" and slightly longer P-N_"pyramidal" bonds, respectively. In all complexes, the NPC² ligands feature more planar N atoms than NPC¹, in accordance with a higher electron-donating capacity of the former.

Homoleptic Acetylacetonate (acac) and β-Ketoiminate (acnac) Complexes of Uranium

Transmetalation of potassium salts of differently substituted acetylacetonate (acac) and β-ketoiminate (acnac) with [U(I)₃(dioxane)_1.5] and [U(I)₄(dioxane)₂] resulted in the formation of homoleptic, octahedral complexes [U(^tBuacnac^Ph)₃] (with ^tBuacnac^Ph = 2,2,6,6-tetramethyl-5-(phenylimino)heptan-3-onate) in the oxidation states +III and +IV and the homoleptic, square prismatic complexes [U^IV(^Meacnac^Ph)₄] (with ^Meacnac^Ph = 4-(phenylimino)pentan-2-onate) and the homoleptic, square antiprismatic complexes [U(^tBuacac)₄] [with acac = 2,2,6,6-tetramethyl-3,5-heptanedionate (^tBuacac), 2,2,6,6-tetramethyl,4-methyl-3,5-heptanedionate (^tBuac^Meac), and 2,2,6,6-tetramethyl-4-phenyl-3,5-heptanedionate (^tBuac^Phac)] in oxidation states +III, +IV, and +V. Oxidation of [U^III(^tBuacnac^Ph)₃] (1) with AgOTf yielded [U^IV(^tBuacnac^Ph)₃][OTf] (2), which was fully characterized by single-crystal X-ray diffraction analysis, a combination of ultraviolet/visible/near-infrared, nuclear magnetic resonance, and infrared spectroscopies, and solid-state superconducting quantum interference device magnetization studies. Complexation of the sterically less encumbering ligand derivative ^Meacnac^Ph provided access to the tetravalent, square antiprismatic complex [U^IV(^Meacnac^Ph)₄] (3). Cyclovoltammetric analysis of the square antiprismatic [U^IV(^tBuacac)₄] (4), [U^IV(^tBuac^Meac)₄] (5), and [U^IV(^tBuac^Phac)₄] (6) revealed reversible anodic and cathodic waves, attributable to the U(III/IV) and U(IV/V) redox couples, both being chemically accessible, as tested in the case of 5. The corresponding U(III) and U(V) compounds, [K(2.2.2-cryptand)][U^III(^tBuac^Meac)₄] (7) and [U^V(^tBuac^Meac)₄][SbF₆] (8), were synthesized accordingly. Unfortunately, reduced 7 proved to be too reactive for isolation and could only be detected by electron paramagnetic resonance spectroscopy. Notably, electrochemical studies on homoleptic uranium(IV) complexes with differently derivatized (R) ac^Rac ligands (R = H, Me, or Ph) feature large electrochemical windows of up to 2.91 V, measured between the uranium(III) and the uranium(V) species, in addition to high stability toward repeated potential scans.

Unconventional Pathways to Carbide Phase Synthesis via Thermal Decomposition of UI4(1,4-dioxane)2

UI₄(1,4-dioxane)₂ was subjected to laser-based heating─a method that enables localized, fast heating (T > 2000 °C) and rapid cooling under controlled conditions (scan rate, power, atmosphere, etc.)─to understand its thermal decomposition. A predictive computational thermodynamic technique estimated the decomposition temperature of UI₄(1,4-dioxane)₂ to uranium (U) metal to be 2236 °C, a temperature achievable under laser irradiation. Dictated by the presence of reactive, gaseous byproducts, the thermal decomposition of UI₄(1,4-dioxane)₂ under furnace conditions up to 600 °C revealed the formation of UO₂, UI_x, and U(C_1-xO_x)_y, while under laser irradiation, UI₄(1,4-dioxane)₂ decomposed to UO₂, U(C_1-xO_x)_y, UC_2-zO_z, and UC. Despite the fast dynamics associated with laser irradiation, the central uranium atom reacted with the thermal decomposition products of the ligand (1,4-dioxane = C₄H₈O₂) instead of producing pure U metal. The results highlight the potential to co-develop uranium precursors with specific irradiation procedures to advance nuclear materials research by finding new pathways to produce uranium carbide.

Unprecedented pairs of uranium (iv/v) hydroxido and (iv/v/vi) oxido complexes supported by a seven-coordinate cyclen-anchored tris-aryloxide ligand

We present the synthesis and reactivity of a newly developed, cyclen-based tris-aryloxide ligand precursor, namely cyclen(Me)( t-Bu,t-BuArOH)3, and its coordination chemistry to uranium. The corresponding uranium(iii) complex [UIII((OAr t-Bu,t-Bu)3(Me)cyclen)] (1) was characterized by 1H NMR analysis, CHN elemental analysis and UV/vis/NIR electronic absorption spectroscopy. Since no single-crystals suitable for X-ray diffraction analysis could be obtained from this precursor, 1 was oxidized with methylene chloride or silver fluoride to yield [(cyclen(Me)( t-Bu,t-BuArO)3)UIV(X)] (X = Cl (2), F (3)), which were unambiguously characterized and successfully crystallized to gain insight into the molecular structure by single-crystal X-ray diffraction analysis (SC-XRD). Further, the activation of H2O and N2O by 1 is presented, resulting in the U(iv) complex [(cyclen(Me)( t-Bu,t-BuArO)3)UIV(OH)] (4) and the U(v) complex [(cyclen(Me)( t-Bu,t-BuArO)3)UV(O)] (6). Complexes 2, 3, 4, and 6 were characterized by 1H NMR analysis, CHN elemental analysis, UV/vis/NIR electronic absorption spectroscopy, IR vibrational spectroscopy, and SQUID magnetization measurements as well as cyclic voltammetry. Furthermore, chemical oxidation of 3, 4, and 6 with AgF or AgSbF6 was achieved leading to complexes [(cyclen(Me)( t-Bu,t-BuArO)3)UV(F)2] (5), [(cyclen(Me)( t-Bu,t-BuArO)3)UV(OH)][SbF6] (7), and [(cyclen(Me)( t-Bu,t-BuArO)3)UVI(O)][SbF6] (8). Finally, reduction of 7 with KC8 yielded a U(iv) complex, spectroscopically and magnetochemically identified as K[(cyclen(Me)( t-Bu,t-BuArO)3)UIV(O)].

Homoleptic Uranium-Bis(acyl)phosphide Complexes

The first uranium bis(acyl)phosphide (BAP) complexes were synthesized from the reaction between sodium bis(mesitoyl)phosphide (Na(^mesBAP)) or sodium bis(2,4,6-triisopropylbenzoyl)phosphide (Na(^trippBAP)) and UI₃(1,4-dioxane)_1.5. Thermally stable, homoleptic BAP complexes were characterized by single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopy, when appropriate, for the elucidation of the electronic structure and bonding of these complexes. EPR spectroscopy revealed that the BAP ligands on the uranium center retain a significant amount of electron density. The EPR spectrum of the trivalent U(^trippBAP)₃ has a rhombic signal near g = 2 (g₁ = 2.03; g₂ = 2.01; and g₃ = 1.98) that is consistent with the EPR-observed unpaired electron being located in a molecular orbital that appears ligand-derived. However, upon warming the complex to room temperature, no resonance was observed, indicating the presence of uranium character.

Toward Opto-Structural Correlation to Investigate Luminescence Thermometry in an Organometallic Eu(II) Complex

Lanthanide-based luminescent materials have unique properties and are well-studied for many potential applications. In particular, the characteristic 5d → 4f emission of divalent lanthanide ions such as Eu^II allows for tunability of the emissive properties via modulation of the coordination environment. We report the synthesis and photoluminescence investigation of pentamethylcyclopentadienyleuropium(II) tetrahydroborate bis(tetrahydrofuran) dimer (1), the first example of an organometallic, discrete molecular Eu^II band-shift luminescence thermometer. Complex 1 exhibits an absolute sensitivity of 8.2 cm^-1 K^-1 at 320 K, the highest thus far observed for a lanthanide-based band-shift thermometer. Opto-structural correlation via variable-temperature single-crystal X-ray diffraction and fluorescence spectroscopy allows rationalization of the remarkable thermometric luminescence of complex 1 and reveals the significant potential of molecular Eu^II compounds in luminescence thermometry.

Synthesis of Non-Aqueous Neptunium(III) Halide Solvates from NpO2

Two Np(III) halides, NpI₃ (THF)₄ and NpBr₃ (THF)₄ , have been prepared and isolated in high yields as described in this work. Starting with neptunia (NpO₂ ), NpCl₄ (DME)₂ was first generated in an updated, higher yielding synthesis than what was previously reported by using HCl/HF. This material was then reduced with KC₈ , followed by subsequent ligand exchange, to generate NpBr₃ (THF)₄ and NpI₃ -(THF)₄ . Full characterization by single-crystal X-ray crystallography, ¹ H NMR spectroscopy and electronic absorption spectroscopy confirmed the molecular formulas and oxidation states. These trivalent materials are straightforward to synthesize and can be used as starting materials for non-aqueous Np(III) chemistry, obviating the need for rare and restricted Np metal and elemental halogens.

Uranium Going the Soft Way: Low-Valent Uranium(III) Coordinated to an Arene-Anchored Tris-Thiophenolate Ligand

The synthesis of a tripodal, S-based ligand, namely the mesitylene-anchored, tris-thiophenolate-functionalized (mes(^Me,AdArS)₃)^3- (1)^3-, and its coordination chemistry with low-valent uranium to form [U^III((SAr^Ad,Me)₃mes)] (1-U) are reported. Single-crystal X-ray diffraction analysis reveals a C₃-symmetric molecular structure. Full characterization of 1-U was performed using nuclear magnetic resonance, UV-vis-NIR electronic absorption, and electron paramagnetic resonance spectroscopies as well as SQUID magnetometry, thus confirming the U(III) oxidation state. Alternating current magnetic studies show that 1-U exhibits single-molecule magnet behavior at low temperatures in a non-zero external field. Comparison of these results to those of the previously reported mesitylene-anchored complexes, [U^III((OAr^Ad,Me)₃mes)] and [U^III((OAr^tBu,tBu)₃mes)], indicates a drastic change in the electronic structure when moving from phenolate-based ligands to thiophenolate-based 1, which is further discussed by means of computational analysis (NBO, DFT, and QTAIM). Despite the U-O bonds being stronger, a much higher covalency was found for the U-S analogue.

Mechanochemical synthesis and structural analysis of trivalent lanthanide and uranium diphenylphosphinodiboranates

Phosphinodiboranates (H₃BPR₂BH₃^-) are a class of borohydrides that have merited a reputation as weakly coordinating anions, which is attributed in part to the dearth of coordination complexes known with transition metals, lanthanides, and actinides. We recently reported how K(H₃BP^tBu₂BH₃) exhibits sluggish salt elimination reactivity with f-metal halides in organic solvents such as Et₂O and THF. Here we report how this reactivity appears to be further attenuated in solution when the ^tBu groups attached to phosphorus are exchanged for R = Ph or H, and we describe how mechanochemistry was used to overcome limited solution reactivity with K(H₃BPPh₂BH₃). Grinding three equivalents of K(H₃BPPh₂BH₃) with UI₃(THF)₄ or LnI₃ (Ln = Ce, Pr, Nd) allowed homoleptic complexes with the empirical formulas U(H₃BPPh₂BH₃)₃ (1), Ce(H₃BPPh₂BH₃)₃ (2), Pr(H₃BPPh₂BH₃)₃ (3), and Nd(H₃BPPh₂BH₃)₃ (4) to be prepared and subsequently crystallized in good yields (50-80%). Single-crystal XRD studies revealed that all four complexes exist as dimers or coordination polymers in the solid-state, whereas ¹H and ¹¹B NMR spectra showed that they exist as a mixture of monomers and dimers in solution. Treating 4 with THF breaks up the dimer to yield the monomeric complex Nd(H₃BPPh₂BH₃)₃(THF)₃ (4-THF). XRD studies revealed that 4-THF has one chelating and two dangling H₃BPPh₂BH₃^- ligands bound to the metal to accommodate binding of THF. In contrast to the results with K(H₃BPPh₂BH₃), attempting the same mechanochemical reactions with Na(H₃BPH₂BH₃) containing the simplest phosphinodiboranate were unsuccessful; only the partial metathesis product U(H₃BPH₂BH₃)I₂(THF)₃ (5) was isolated in poor yields. Despite these limitations, our results offer new examples showing how mechanochemistry can be used to rapidly synthesize molecular coordination complexes that are otherwise difficult to prepare using more traditional solution methods.

Isocyanide adducts of tri- and tetravalent uranium metallocenes supported by tetra(isopropyl)cyclopentadienyl ligands

Reaction of the uranium(iii) metallocenium salt [(CpiPr4)2U][B(C6F5)4] with tert-butyl isocyanide (tBuNC) yielded the dicationic uranium(iv) complex [(CpiPr4)2U(CNtBu)4][B(C6F5)4]2 (1), which displays a linear metallocene geometry. Use of crude mixtures of [(CpiPr4)2U][B(C6F5)4], which contain a soluble source of iodide, led instead to isolation of the monocationic uranium(iv) iodide complex [(CpiPr4)2U(I)(CNtBu)2][B(C6F5)4] (2). Adduct formation with no change in oxidation state was observed upon addition of tBuNC to the neutral uranium(iii) species (CpiPr4)2UI, resulting in isolation of (CpiPr4)2U(I)(CNtBu) (3). X-ray crystallographic and IR spectroscopic studies both showed effects ascribed to the presence of multiple strongly donating isocyanide ligands in 1.

Structure and magnetism of a tetrahedral uranium(iii) β-diketiminate complex

We describe the functionalisation of the previously reported uranium(iii) β-diketiminate complex (BDI)UI₂(THF)₂ (1) with one and two equivalents of a sterically demanding 2,6-diisopropylphenolate ligand (ODipp) leading to the formation of two heteroleptic complexes: [(BDI)UI(ODipp)]₂ (2) and (BDI)U(ODipp)₂ (3). The latter is a rare example of a tetrahedral uranium(iii) complex, and it shows single-molecule magnet behaviour.

The synthesis and versatile reducing power of low-valent uranium complexes

This synthesis and diverse reactivity of uranium(iii) and uranium(ii) complexes is discussed.

Applications of boroxide ligands in supporting small molecule activation by U(iii) and U(iv) complexes

The boroxide ligand [OBAr2]- (Ar = Mes, Trip) is shown to be able to support both UIII and UIV centres for the first time. The synthesis and structures of homoleptic and heteroleptic UIII and UIV complexes are reported. The UX3 complex with larger substituents, [U(OBTrip2)3]2, exhibits greater thermal stability compared to less encumbered [U(OBMes2)3]2 but reacts with a smaller range of the small molecules tested to date. Initial studies on their capacity to participate in small molecule chemistry show that dark purple [U(OBMes2)3]2 binds and/or reductively activates a variety of small molecules such as pyridine-oxide, triphenylphosphineoxide, sulfur, and dicyclohexylcarbodiimide. While [U(OBMes2)3]2 shows no reaction with CO or CO2, [U(OBTrip2)3]2 is oxidised by both, in the former case forming [U(OBTrip2)4], and in the latter case forming a small quantity of the structurally characterised μ-carbonate product [(μ-CO3){U(OBTrip2)3}2].

Zinc as a versatile connecting atom for zintl cluster oligomers

Homoatomic cluster aggregation is a versatile route to build up atom-precise nano structures. In this work, we present first structures representing building motifs of hypothetical ZnGe₉ networks.

Two-electron oxidation of a homoleptic U(iii) guanidinate complex by diphenyldiazomethane

Reaction of the first homoleptic U(iii) guanidinate complex with diphenyldiazomethane results in two-electron oxidation of U(iii) to U(v) and isolation of a U(v) hydrazido complex. Corresponding U(v) imido, U(v) oxo, and U(iv) azido complexes were also synthesized for structural comparison.

New supporting ligands in actinide chemistry: tetramethyltetraazaannulene complexes with thorium and uranium

We report the synthesis, characterization, and preliminary reactivity of new heteroleptic thorium and uranium complexes supported by the macrocyclic TMTAA ligand (TMTAA = Tetramethyl-tetra-aza-annulene). The dihalide complexes Th(TMTAA)Cl₂(THF)₂ (1), [UCl₂(TMTAA)]₂ (2) and U(TMTAA)I₂ (3) are further functionalized to the Cp* derivatives ThCp*(TMTAA)Cl (4), UCp*(TMTAA)Cl (5) and UCp*(TMTAA)I (6) (Cp* = pentamethylcyclopentadienide). Compounds 4-6 are also obtained through a one-pot reaction from standard thorium(iv) and uranium(iv) starting materials, Li2TMTAA and KCp*. Complexes 1-6 function as valuable starting materials for salt metathesis chemistry. Treatment of precursors 4 or 5 with trimethylsilylmethyllithium (LiCH₂TMS) results in the new actinide TMTAA alkyl complexes ThCp*(TMTAA)(CH₂TMS) (7) and UCp*(TMTAA)(CH₂TMTS) (8), respectively. The TMTAA-derived alkyl complexes (7 and 8) show unexpected stability and are stable for several weeks at room temperature in solution and in the solid-state. Additionally, double substitution of the halide ligands in 1-3 shows a strong dependence on the nucleophile used. While weaker nucleophiles, such as amides, and more sterically demanding nucleophiles, such as Cp (Cp = cyclopenadienide), favour the formation of bis-TMTAA "sandwich" complexes [An(TMTAA)₂] (An = Th (9) and An = U (10)), the use of oxygen-functionalized ligands like the ODipp anion (Dipp = diisopropylphenyl) results in the formation of the doubly substituted species Th(ODipp)₂TMTAA (11) and U(ODipp)₂TMTAA (12). We also describe the divergent reactivity of the TMTAA ligand towards uranium(iii). Unlike the syntheses of actinide(iv) TMTAA complexes, the synthesis of a uranium(iii) TMTAA was not successful and only uranium(iv) species could be obtained.

Small-Scale Metal-Based Syntheses of Lanthanide Iodide, Amide, and Cyclopentadienyl Complexes as Analogues for Transuranic Reactions

Small-scale reactions of the Pu analogues La, Ce, and Nd have been explored in order to optimize reaction conditions for milligram scale reactions of radioactive plutonium starting from the metal. Oxidation of these lanthanide metals with iodine in ether and pyridine has been studied, and LnI₃(Et₂O)_x (1-Ln; x = 0.75-1.9) and LnI₃(py)₄ (2-Ln; py = pyridine, NC₅H₅) have been synthesized on scales ranging from 15 mg to 2 g. The THF adducts LnI₃(THF)₄ (3-Ln) were synthesized by dissolving 1-Ln in THF. The viability of these small-scale samples as starting materials for amide and cyclopentadienyl f-element complexes was tested by reacting KN(SiMe₃)₂, KCp' (Cp' = C₅H₄SiMe₃), KCp'' (Cp'' = C₅H₃(SiMe₃)₂-1,3), and KC₅Me₄H with 1-Ln generated in situ. These reactions produced Ln[N(SiMe₃)₂]₃ (4-Ln), Cp'₃Ln (5-Ln), Cp″₃Ln (6-Ln), and (C₅Me₄H)₃Ln (7-Ln), respectively. Small-scale samples of Cp'₃Ce (5-Ce) and Cp'₃Nd (5-Nd) were reduced with potassium graphite (KC₈) in the presence of 2.2.2-cryptand to check the viability of generating the crystallographically characterizable Ln²⁺ complexes [K(2.2.2-cryptand)][Cp'₃Ln] (8-Ln; Ln = Ce, Nd).

Facile syntheses of pure uranium halides: UCl4, UBr4 and UI4

Herein we describe convenient lab scale syntheses of several uranium(iv) halides of high purity by reaction of AlX₃ (X = Cl, Br and I) with UO₂, which is readily available by reduction of uranyl salts like UO₂(NO₃)₂·6H₂O.

A Homoleptic Uranium(III) Tris(aryl) Complex

The reaction of 3 equiv of Li-C₆H₃-2,6-(C₆H₄-4-^tBu)₂ (Terph-Li) with UI₃(1,4-dioxane)_1.5 led to the formation of the homoleptic uranium(III) tris(aryl) complex (Terph)₃U (1). The U-C bonds are reactive: treatment with excess ⁱPrN═C═NⁱPr yielded the double-insertion product [TerphC(NⁱPr)₂]₂U(Terph) (2). Complexes 1 and 2 were characterized by X-ray crystallography, which showed that the U-C bond length in 2 (2.624(4) Å) is ∼0.1 Å longer than the average U-C bond length in 1 (2.522(2) Å). Thermal decomposition of 1 yielded Terph-H as the only identifiable product; the process is unimolecular with activation parameters ΔH^⧧ = 21.5 ± 0.3 kcal/mol and ΔS^⧧ = -7.5 ± 0.8 cal·mol^-1 K^-1, consistent with intramolecular proton abstraction. The protonolysis chemistry of 1 was also explored, which led to the uranium(IV) alkoxide complex U(OCPh₃)₄(DME) (3·DME).

Reductive disproportionation of nitric oxide mediated by low-valent uranium

The reductive disproportionation of nitric oxide (1 atm) is mediated by the bulky U(III) aryloxide [U(III)(OAr(Ad,Ad,Me))3] ((Ad,Ad,Me)ArO = O-C6H2-2,6-Ad-4-Me) (1) to form the U(V) terminal oxo species [((Ad,Ad,Me)ArO)3U(V)(O)] (2) and N2O, as confirmed by single crystal X-ray diffraction and GC-MS measurements. The reaction is quantitative in the solid state. Mechanistic and theoretical studies of the reaction suggest that the N-N bond is formed by the coupling of an η(1)-O bound nitric oxide ligand with gaseous NO to give an η(1)-(N2O2)(1-) intermediate prior to the spontaneous extrusion of N2O to yield the U(V) terminal oxo species 2.

Uranium(iv) terminal hydrosulfido and sulfido complexes: insights into the nature of the uranium-sulfur bond

Herein, we report the synthesis and characterization of a series of terminal uranium(iv) hydrosulfido and sulfido complexes, supported by the hexadentate, tacn-based ligand framework (^Ad,MeArO)₃tacn^3- (= trianion of 1,4,7-tris(3-(1-adamantyl)-5-methyl-2-hydroxybenzyl)-1,4,7-triazacyclononane). The hydrosulfido complex [((^Ad,MeArO)₃tacn)U-SH] (2) is obtained from the reaction of H₂S with the uranium(iii) starting material [((^Ad,MeArO)₃tacn)U] (1) in THF. Subsequent deprotonation with potassium bis(trimethylsilyl)amide yields the mononuclear uranium(iv) sulfido species in good yields. With the aid of dibenzo-18-crown-6 and 2.2.2-cryptand, it was possible to isolate a terminal sulfido species, capped by the potassium counter ion, and a "free" terminal sulfido species with a well separated cation/anion pair. Spectroscopic and computational analyses provided insights into the nature of the uranium-sulfur bond in these complexes.

Metal-Metal Bonding in Uranium-Group 10 Complexes

Heterobimetallic complexes containing short uranium–group 10 metal bonds have been prepared from monometallic IU^IV(OAr^P-κ²O,P)₃ (2) {[Ar^PO]⁻ = 2-tert-butyl-4-methyl-6-(diphenylphosphino)phenolate}. The U–M bond in IU^IV(μ-OAr^P-1κ¹O,2κ¹P)₃M⁰, M = Ni (3–Ni), Pd (3–Pd), and Pt (3–Pt), has been investigated by experimental and DFT computational methods. Comparisons of 3–Ni with two further U–Ni complexes XU^IV(μ-OAr^P-1κ¹O,2κ¹P)₃Ni⁰, X = Me₃SiO (4) and F (5), was also possible via iodide substitution. All complexes were characterized by variable-temperature NMR spectroscopy, electrochemistry, and single crystal X-ray diffraction. The U–M bonds are significantly shorter than any other crystallographically characterized d–f-block bimetallic, even though the ligand flexes to allow a variable U–M separation. Excellent agreement is found between the experimental and computed structures for 3–Ni and 3–Pd. Natural population analysis and natural localized molecular orbital (NLMO) compositions indicate that U employs both 5f and 6d orbitals in covalent bonding to a significant extent. Quantum theory of atoms-in-molecules analysis reveals U–M bond critical point properties typical of metallic bonding and a larger delocalization index (bond order) for the less polar U–Ni bond than U–Pd. Electrochemical studies agree with the computational analyses and the X-ray structural data for the U–X adducts 3–Ni, 4, and 5. The data show a trend in uranium–metal bond strength that decreases from 3–Ni down to 3–Pt and suggest that exchanging the iodide for a fluoride strengthens the metal–metal bond. Despite short U–TM (transition metal) distances, four other computational approaches also suggest low U–TM bond orders, reflecting highly transition metal localized valence NLMOs. These are more so for 3–Pd than 3–Ni, consistent with slightly larger U–TM bond orders in the latter. Computational studies of the model systems (PH₃)₃MU(OH)₃I (M = Ni, Pd) reveal longer and weaker unsupported U–TM bonds vs 3.

Reductive silylation of Cp*UO2((Mes)PDI(Me)) promoted by Lewis bases

Functionalization of the uranyl moiety (UO2(2+)) in Cp*UO2((Mes)PDI(Me)) (1-PDI) ((Mes)PDI(Me) = 2,6-((Mes)N=CMe)2C5H3N; Mes = 2,4,6-triphenylmethyl), which bears a reduced, monoanionic pyridine(diimine) ligand, is reported. Silylating reagents, R3Si-X (R = Me, X = Cl, I, OTf, SPh; R = Ph, X = Cl), effectively add across the strong O=U=O bonds in the presence of the Lewis base, OPPh3, generating products of the form (R3SiO)2UX2(OPPh3)2 (R = Me, X = I (2-OPPh3), Cl (3-OPPh3), SPh (5-OPPh3), OTf (6-OPPh3); R = Ph, X = Cl (4-OPPh3)). During this transformation, reduction to uranium(iv) occurs with loss of (Cp*)2 and (Mes)PDI(Me), each of which acts as a one-electron source. In the reaction, the Lewis base serves to activate the silyl halide, generating a more electrophilic silyl group, as determined by (29)Si NMR spectroscopy, that undergoes facile transfer to the oxo groups. Complete U-O bond scission was accomplished by treating the uranium(iv) disiloxide compounds with additional silylating reagent, forming the family (Ph3PO)2UX4. All compounds were characterized by (1)H NMR, infrared, and electronic absorption spectroscopies. X-ray crystallographic characterization was used to elucidate the structures of 2-OPPh3, 4-OPPh3, 5-OPPh3, and 6-OPPh3.