Highly Efficient Aluminum-Catalyzed Ring-Opening Polymerization of Cyclic Carbonates, Lactones, and Lactides, Including a Unique Crystallographic Snapshot of an Intermediate

Collaboration between Trinuclear Aluminum Complexes Bearing Bipyrazoles in the Ring-Opening Polymerization of ε-Caprolactone

Trinuclear aluminum complexes bearing bipyrazoles were synthesized, and their catalytic activity for ε-caprolactone (CL) polymerization was investigated. D^Bu₂Al₃Me₅ exhibited higher catalytic activity than did the dinuclear aluminum complex L^Bu₂Al₂Me₄ (16 times as high for CL polymerization; [CL]:[D^Bu₂Al₃Me₅]:[BnOH] = 100:0.5:5, [D^Bu₂Al₃Me₅] = 10 mM, conversion 93% after 18 min at room temperature). Density functional theory calculations revealed a polymerization mechanism in which CL first approached the central Al atom and then moved to an external Al. The coordinated CL ring was opened because the repulsion of two tert-butyl groups on the ligands pushed an alkoxide initiator on an external Al to initiate CL. In these trinuclear Al catalysts, the central Al plays a role in monomer capture and then collaborates with the external Al to activate CL, accelerating polymerization.

Homoleptic titanium and zirconium complexes exhibiting unusual Oiminol–metal coordination: application in stereoselective ring-opening polymerization of lactide

The synthesis and characterization of novel homoleptic Ti and Zr complexes with tridentate ONO-type Schiff base ligands and their catalytic activities towards the ring-opening polymerization (ROP) of lactide are reported.

Mechanistic Insight into the Ring-Opening Polymerization of ε-Caprolactone and L-Lactide Using Ketiminate-Ligated Aluminum Catalysts

The reactivity and the reaction conditions of the ring-opening polymerization of ε-caprolactone (ε-CL) and L-lactide (LA) initiated by aluminum ketiminate complexes have been shown differently. Herein, we account for the observation by studying the mechanisms on the basis of density functional theory (DFT) calculations. The calculations show that the ring-opening polymerization of ε-CL and LA are rate-determined by the benzoxide insertion and the C–O bond cleavage step, respectively. Theoretical computations suggest that the reaction temperature of L–LA polymerization should be higher than that of ε-CL one, in agreement with the experimental data. To provide a reasonable interpretation of the experimental results and to give an insight into the catalyst design, the influence of the electronic, steric, and thermal effects on the polymerization behaviors will be also discussed in this study.

Salen complexes of zirconium and hafnium: synthesis, structural characterization and polymerization studies

Salen complexes of zirconium and hafnium were synthesized and used as effective catalysts for the polymerization of lactide and ε-CL and homopolymerization, copolymerization and coupling of epoxides with CO₂.

Low valent Al(ii)–Al(ii) catalysts as highly active ε-caprolactone polymerization catalysts: indication of metal cooperativity through DFT studies

A dinuclear Al(ii)–Al(ii) species acts as a highly effective ROP catalyst of ε-caprolactone at room temperature, with a DFT computed ROP mechanism indicative of metal cooperativity.

Synthesis of Aluminum Complexes Bearing 8-Anilide-5,6,7-trihydroquinoline Ligands: Highly Active Catalyst Precursors for Ring-Opening Polymerization of Cyclic Esters

The stoichiometric reactions of 8-(2,6-R¹-4-R²-anilide)-5,6,7-trihydroquinoline (LH) with AlR₃ (R = Me or Et) afforded the aluminum complexes LAlR₂ (Al1⁻Al5,Al1: R¹ = ⁱPr, R² = H, R = Me; Al2: R¹ = Me, R² = H, R = Me; Al3: R¹ = H, R² = H, R = Me; Al4: R¹ = Me, R² = Me, R = Me; Al5: R¹ = Me, R² = Me, R = Et) in high yields. All aluminum complexes were characterized by NMR spectroscopy and elemental analysis. The molecular structures of complexes Al4 and Al5 were determined by single-crystal X-ray diffractions and revealed a distorted tetrahedral geometry at aluminum. In the presence of BnOH, complexes Al1⁻Al5 efficiently initiated the ring-opening homopolymerization of ε-caprolactone (ε-CL) and rac-lactide (rac-LA), respectively, in a living/controlled manner.

Synthesis of dinuclear aluminum complexes bearing bis-phenolate ligand and application in ring-opening polymerization of ε-caprolactone

Dinuclear zwitterionic aluminum complexes were prepared and applied as efficient catalysts toward ROP of ε-CL in a controlled manner.

Group 4 metal complexes of Trost's semi-crown ligand: synthesis, structural characterization and studies on the ring-opening polymerization of lactides and ε-caprolactone

The synthesis of titanium(IV), zirconium(IV) and hafnium(IV) complexes of Trost's semi-crown ligand is described. All complexes were fully characterized by 1H and 13C NMR and mass spectroscopy. The molecular structures of the representative complexes 2, 3 and 4 were determined by single-crystal X-ray diffraction studies. The X-ray diffraction studies reveal that complexes 2, 3 and 4 crystallized in an orthorhombic crystal system. Complexes 2 and 3 have a monomeric structure in the solid state with distorted octahedral geometry around the metal center, whereas complex 4 was found to crystallize in a trimeric structure bridging with an oxygen atom, where the geometry around the titanium is distorted trigonal bipyramidal. The activities and stereoselectivities of these complexes toward the ring-opening polymerization (ROP) of lactides (L-LA and rac-LA) and ε-caprolactone (CL) have been investigated. Complexes 1–4 were found to be efficient single-component initiators for the ring-opening polymerization of cyclic esters and yielded high molecular weight polymers (Mn) with narrow molecular weight distributions (MWD).The microstructure of the resultant polylactides (PLAs) from rac-LA was determined. Complexes 2 and 3 afforded isotactic-enriched PLA (Pm = 0.78–0.71) with narrow MWD (1.07–1.04), on the other hand complexes 1 and 4 produced atactic PLA. Kinetic and post polymerization studies confirm that the polymerization proceeds through the coordination–insertion mechanism.

Traceless switch organocatalysis enables multiblock ring-opening copolymerizations of lactones, carbonates, and lactides: by a one plus one approach in one pot

A switch of organocatalysis from cationic to base/conjugate-acid bifunctional mechanisms made ring-opening copolymerizations of lactones/carbonates to lactides success.

High activity of an indium alkoxide complex toward ring opening polymerization of cyclic esters

An indium complex supported by a ferrocene-derived Schiff base ligand has unprecedented activity toward ε-caprolactone, δ-valerolactone, and β-butyrolactone ring-opening polymerizations. l-Lactide, d,l-lactide, and trimethylene carbonate polymerizations also showed moderate to high activity.

Comparing l-lactide and ε-caprolactone polymerization by using aluminum complexes bearing ketiminate ligands: steric, electronic, and chelating effects

Herein, the l-lactide polymerization rate of a series of Al complexes bearing ketimine ligands was investigated, and the polymerization characteristics between l-lactide and ε-caprolactone were compared.

Heteroleptic tin(II) initiators for the ring-opening (co)polymerization of lactide and trimethylene carbonate: mechanistic insights from experiments and computations

The tin(II) complexes {LO(x)}Sn(X) ({LO(x)}(-) =aminophenolate ancillary) containing amido (1-4), chloro (5), or lactyl (6) coligands (X) promote the ring-opening polymerization (ROP) of cyclic esters. Complex 6, which models the first insertion of L-lactide, initiates the living ROP of L-LA on its own, but the amido derivatives 1-4 require the addition of alcohol to do so. Upon addition of one to ten equivalents of iPrOH, precatalysts 1-4 promote the ROP of trimethylene carbonate (TMC); yet, hardly any activity is observed if tert-butyl (R)-lactate is used instead of iPrOH. Strong inhibition of the reactivity of TMC is also detected for the simultaneous copolymerization of L-LA and TMC, or for the block copolymerization of TMC after that of L-LA. Experimental and computational data for the {LO(x)}Sn(OR)complexes (OR=lactyl or lactidyl) replicating the active species during the tin(II)-mediated ROP of L-LA demonstrate that the formation of a five-membered chelate is largely favored over that of an eight-membered one, and that it constitutes the resting state of the catalyst during this (co)polymerization. Comprehensive DFT calculations show that, out of the four possible monomer insertion sequences during simultaneous copolymerization of L-LA and TMC: 1) TMC then TMC, 2) TMC then L-LA, 3) L-LA then L-LA, and 4) L-LA then TMC, the first three are possible. By contrast, insertion of L-LA followed by that of TMC (i.e., insertion sequence 4) is endothermic by +1.1 kcal mol(-1), which compares unfavorably with consecutive insertions of two L-LA units (i.e., insertion sequence 3) (-10.2 kcal mol(-1)). The copolymerization of L-LA and TMC thus proceeds under thermodynamic control.

Ring opening polymerization of rac-lactide by group 4 tetracarbamato complexes: activation, propagation and role of the metal

A series of group 4 metal tetracarbamates M(O(2)CNR(2))(4) (M = Ti, R = Et, 1a; M = Zr, R = Et, 1b; (i)Pr, 1c; M = Hf, R = Et, 1d; R = (i)Pr, 1e) were studied as catalytic precursors in the solution polymerization of rac-lactide. The titanium complex but not the zirconium and hafnium ones increase the activity by addition of (i)PrOH. The structure of the carbamato ligand markedly influences the molar mass of polymer; the complexes with isopropyl carbamato ligands produced PLA with molar masses up to 94,000 g mol(-1). The main mechanistic aspects of the initial stages of the polymerization reactions were outlined by spectroscopic and computational analyses. In the case of zirconium and hafnium complexes, an interaction between a carbamato ligand and the CH unit of one lactide molecule is established at room temperature. This interaction is followed by the high temperature proton transfer from the lactide to the carbamato O-atom, affording a catalytic active alkoxy complex with release of CO(2) and NHR(2). The polymerization mediated by Ti(O(2)CNEt(2))(4) involves the release of a radical fragment [O(2)CNEt(2)]˙, with consequent generation of a Ti(III) center. The propagating chain is an alcoholate ligand coordinated to a Ti(IV) centre and containing a radical mainly localized at the tail of the chain (DFT, EPR).