Aluminum Complexes of Bidentate Fluorinated Alkoxy-Imino Ligands: Syntheses, Structures, and Use in Ring-Opening Polymerization of Cyclic Esters

Alkali metal complex-mediated ring-opening polymerization of rac-LA, ε-caprolactone, and δ-valerolactone

Catalytic ring opening polymerization (ROP) of rac-lactide, ε-caprolactone, and δ-valerolactone using alkali metal (Li, Na, K) complexes as competent catalysts are reported.

Bimetallic Aluminum 5,6-Dihydro-7,7-dimethyl quinolin-8-olates as Pro-Initiators for the ROP of ε-CL; Probing the Nuclearity of the Active Initiator

Six examples of aluminum 5,6-dihydro-7,7-dimethylquinolin-8-olates, [{2-R¹-7,7-Me₂-8-R²C₉H₆N-8-O}AlR³₂]₂ (R¹ = R² = H, R³ = Me C1; R¹ = R² = H, R³ = Et C2; R¹ = R² = H, R³ = i-Bu C3; R¹ = Cl, R² = H, R³ = Me C4; R¹ = H, R² = R³ = Me C5; R¹ = Cl, R² = R³ = Me C6), have been prepared by treating the corresponding pro-ligand (L1⁻L4) with either AlMe₃, AlEt₃ or Al(i-Bu)₃. All complexes have been characterized by ¹H and 13C NMR spectroscopy and in the case of C1 and C4 by single crystal X-ray diffraction; dimeric species are a feature of their molecular structures. In the presence of PhCH₂OH (BnOH), C1⁻C6 displayed good control and efficiency for the ROP of ε-CL with almost 100% conversion achievable in 10 min at 90 °C; the chloro-substituted C4 and C6 notably exhibited the lowest activity of the series. However, in the absence of BnOH, C1 showed only low activity with 15% conversion achieved in 30 min forming a linear polymer capped with either a methyl or a L1 group. By contrast, when one or more equivalents of BnOH was employed in combination with C1, the resulting catalyst was not only more active but gave linear polymers capped with BnO end-groups. By using ¹H and 27Al NMR spectroscopy to monitor solutions of C1, C1/BnOH and C1/BnOH/10 ε-CL over a range of temperatures, some support for a monomeric species being the active initiator at the operational temperature is presented.

Calcium, Strontium and Barium Homogeneous Catalysts for Fine Chemicals Synthesis

The large alkaline earths (Ae), calcium, strontium and barium, have in the past 15 years yielded a brand new generation of heteroleptic molecular catalysts for the production of fine chemicals. However, the integrity of these complexes is often plagued by ligand redistribution equilibria in solution. This personal account retraces the paths followed in our research group towards the design of stable heteroleptic alkalino-earth complexes, including the use of intramolecular noncovalent Ae···H-Si and Ae···F-C interactions. Their implementation as homogenous precatalysts for reactions such as the intramolecular and intermolecular hydroamination and hydrophosphination of activated alkenes, the hydrophosphonylation of ketones, and the dehydrogenative coupling of amines and hydrosilanes that enable the efficient and controlled formations of CP, CN, or SiN σ-bonds, is presented in a synthetic perspective that highlights their overall outstanding catalytic performance.

Synthesis and characterization of dinuclear rare-earth complexes supported by amine-bridged bis(phenolate) ligands and their catalytic activity for the ring-opening polymerization of l-lactide

Reactions of amine-bridged bis(phenolate) protio-ligands N,N-bis(3,5-di-tert-butyl-2-hydroxybenzyl)aminoacetic acid (L(1)-H3) and N,N-bis[3,5-bis(α,α'-dimethylbenzyl)-2-hydroxybenzyl]aminoacetic acid (L(2)-H3), with 1 equiv. M[N(SiMe3)2]3 (M = La, Nd, Sm, Gd, Y) in THF at room temperature yielded the neutral rare-earth complexes [M2(L)2(THF)4] (L = L(1), M = La (), Nd (), Sm (), Gd (), Y (); L = L(2), M = La (), Nd (), Sm (), Gd (), Y ()). All of these complexes were characterized by single-crystal X-ray diffraction, elemental analysis and in the case of yttrium and lanthanum complexes, (1)H NMR spectroscopy. The molecular structure of revealed dinuclear species in which the eight-coordinate lanthanum centers were bonded to two oxygen atoms of two THF molecules, to three oxygen atoms and one nitrogen atom of one L(1) ligand, and two oxygen atoms of the carboxyl group of another. Complexes were also dinuclear species containing seven-coordinate metal centers similar to , albeit with bonding to one rather than two carboxyl group oxygens of another ligand. Further treatment of with excess benzyl alcohol provided dinuclear complex [La2(L(1))2(BnOH)6] (), in which each lanthanum ion is eight-coordinate, bonded to three oxygen atoms and one nitrogen atom of one ligand, three oxygen atoms of three BnOH molecules, as well as one oxygen atom of bridging carboxyl group of the other ligand. In the presence of BnOH, complexes efficiently catalyzed the ring-opening polymerization of l-lactide in a controlled manner and gave polymers with relatively narrow molecular weight distributions. The kinetic and mechanistic studies associated with the ROP of l-lactide using /BnOH initiating system have been performed.

Group 4 metal complexes of Trost's semi-crown ligand: synthesis, structural characterization and studies on the ring-opening polymerization of lactides and ε-caprolactone

The synthesis of titanium(IV), zirconium(IV) and hafnium(IV) complexes of Trost's semi-crown ligand is described. All complexes were fully characterized by 1H and 13C NMR and mass spectroscopy. The molecular structures of the representative complexes 2, 3 and 4 were determined by single-crystal X-ray diffraction studies. The X-ray diffraction studies reveal that complexes 2, 3 and 4 crystallized in an orthorhombic crystal system. Complexes 2 and 3 have a monomeric structure in the solid state with distorted octahedral geometry around the metal center, whereas complex 4 was found to crystallize in a trimeric structure bridging with an oxygen atom, where the geometry around the titanium is distorted trigonal bipyramidal. The activities and stereoselectivities of these complexes toward the ring-opening polymerization (ROP) of lactides (L-LA and rac-LA) and ε-caprolactone (CL) have been investigated. Complexes 1–4 were found to be efficient single-component initiators for the ring-opening polymerization of cyclic esters and yielded high molecular weight polymers (Mn) with narrow molecular weight distributions (MWD).The microstructure of the resultant polylactides (PLAs) from rac-LA was determined. Complexes 2 and 3 afforded isotactic-enriched PLA (Pm = 0.78–0.71) with narrow MWD (1.07–1.04), on the other hand complexes 1 and 4 produced atactic PLA. Kinetic and post polymerization studies confirm that the polymerization proceeds through the coordination–insertion mechanism.

Aluminum alkyl complexes: synthesis, structure, and application in ROP of cyclic esters

Aluminum alkyl complexes have very useful applications as catalysts or reagents in small molecule transformations and as cocatalysts in olefin polymerization. This short review focuses on some recent developments in the design, synthesis and structure of aluminum(iii) alkyl complexes supported by various ligands bearing nitrogen, oxygen, sulfur or phosphorus atoms, and their catalytic applications in the ring-opening polymerization (ROP) of cyclic esters. The coordination chemistry of the Al metal centre and the catalytic activity changes of the complexes caused by ligand modifications are also discussed.

Aluminum complexes containing salicylbenzoxazole ligands and their application in the ring-opening polymerization of rac-lactide and ε-caprolactone

Two series of aluminum complexes supported by salicylbenzoxazole ligands were successfully synthesized and applied as active initiators for the ring-opening polymerization of rac-LA and ε-CL.

Yttrium and aluminium complexes bearing dithiodiolate ligands: synthesis and application in cyclic ester polymerization

Yttrium and aluminium complexes of two dithiodiolate ligands that feature different bridges (CF3)2C(OH)CH2SRSCH2C(OH)(CF3)2 (L(1)-H2, R = CH2CH2 and L(2)-H2, R = C6H4) were synthesized in good yields by reacting tris(silylamide)yttrium or trimethylaluminium with one equivalent of the proligand. All complexes were characterized by NMR and elemental analysis, and single-crystal X-ray structural analysis was also performed for one of the yttrium complexes. The catalytic activities of the four complexes in the ring-opening polymerization of ε-caprolactone and rac-lactide have been investigated. Furthermore, DOSY experiment and DFT calculations have been carried out to determine the structure of the isopropoxo derivative of the complex L(2)Y amide.

Mono-, di- and tetra-zinc complexes derived from an amino-benzotriazole phenolate ligand containing a bulkier N-alkyl pendant arm: synthesis, structure and catalysis for ring-opening polymerization of cyclic esters

Zinc complexes constructed from the amino-modified benzotriazole phenol pro-ligand, 2-(2H-benzotriazol-2-yl)-6-((diisopropylamino)methyl)-4-(2,4,4-trimethylpentan-2-yl)phenol ((C8DIA)BTP-H, 1), were synthesized stepwise and structurally characterized. The reaction of (C8DIA)BTP-H (1) with one equivalent of diethyl zinc (ZnEt2) generates a dimeric and four-coordinated zinc complex, [(μ-(C8DIA)BTP)ZnEt]2 (2), which is doubly bridged by two phenolate groups of C8DIABTP ligands. Further reaction of 2 with benzyl alcohol (BnOH) in stoichiometric proportions affords a tetranuclear zinc benzylalkoxide complex [(μ-OBn)((C8DIA)BTP)Zn]4 (3) that possesses a saddle-shaped core with four μ2-bridging benzylalkoxy groups upon four Zn centres. Interestingly, the di-nuclear Zn alkoxide [(μ-OBn)((C8DIA)BTP)Zn(DMAP)]2 (4) could be prepared by treatment of 3 with a stoichiometric amount of 4-(dimethylamino)pyridine (DMAP). ZnEt2 reacts with two equivalents of 1 in the presence of DMAP (1.0 mol equiv.) to yield a five-coordinated mononuclear zinc complex, [((C8DIA)BTP)2Zn(DMAP)] (5). All complexes adopt an N,O-bidentate coordination mode from the phenoxy oxygen atom and benzotriazole nitrogen atom, in which the nitrogen atom of the pendent arm substituent is not coordinated to the zinc centre. Ring-opening polymerization of ε-caprolactone and β-butyrolactone catalysed by 2 and 3 was investigated.

Metal influence on the iso- and hetero-selectivity of complexes of bipyrrolidine derived salan ligands for the polymerisation of rac-lactide

A series complexes based on 2,2′-bipyrrolidine based salan ligands have been prepared and either isotactic or heterotactic PLA have been prepared.

In this paper we have prepared a series of Ti(iv), Hf(iv) and Al(iii) complexes based on bipyrrolidine salan pro-ligands. The Hf(iv) complexes have all been characterised in the solid-state, the chiral ligands coordinate to Hf(iv) in an α-cis manner whereas the meso ligand coordinates in a β-cis geometry. The Hf(iv) complexes are all active for the ROP of rac-lactide in the melt, with the fluxional meso complex affording a strong isotactic bias P_m = 0.84. As expected Hf(3)(OⁱPr)₂ polymerised l-LA faster than rac-LA (k_app = 5.9 × 10^–3 min^–1vs. 3.8 × 10^–3 min^–1). For Ti(iv) complexes atactic PLA was formed. The salan pro-ligands have also been complexed to Al(iii), and the novel Al–Me and Al-OⁱPr complexes were characterised in the solid and solution state. Al(1)(OⁱPr) was fluxional on the NMR timescale, whereas Al(3)(OⁱPr) was locked in solution with no exchange. Interestingly, the Al(iii) complexes of 3H₂ produce PLA with a very strong heterotactic bias P_r upto 0.87, whereas atactic PLA is produced with 1H₂. For Al(3)(OⁱPr) a linear relationship is observed with M_n and conversion. Experiments with the addition of an equivalent of rac-LA to the selective initiators have also been performed and are discussed.

Ring-opening polymerization of cyclohexene oxide using aluminum amine–phenolate complexes

Al(iii) catalysts at concentrations as low as 0.001% ring-open cyclohexene oxide to yield high molecular weight polyether with narrow dispersity.

Aluminum complexes based on pyridine substituted alcohols: synthesis, structure, and catalytic application in ROP

2,6-Bis(hydroxyalkyl)pyridines were used in the synthesis of Al complexes. The structure of the ligand determines the complex nature. Compounds were used as initiators of lactone ROP.

Comparing a series of 8-quinolinolato complexes of aluminium, titanium and zinc as initiators for the ring-opening polymerization of rac-lactide

The preparation, characterization and properties of a series of 8-hydroxy quinolinolate complexes of Ti(iv), Al(iii) and Zn(ii) are presented. The complexes are active initiators for rac-lactide polymerizations: their performances are compared.

Metal-size influence in iso-selective lactide polymerization

Iso-selective initiators for the ring-opening polymerization (ROP) of rac-lactide are rare outside of Group 13. We describe the first examples of highly iso-selective lutetium initiators. The phosphasalen lutetium ethoxide complex shows excellent iso-selectivity, with a P(i) value of 0.81-0.84 at 298 K, excellent rates, and high degrees of polymerization control. Conversely, the corresponding La derivative exhibits moderate heteroselectivity (P(s)=0.74, 298 K). Thus, the choice of metal center is shown to be crucial in determining the level and mode of stereocontrol. The relative order of rates for the series of complexes is inversely related to metallic covalent radius: that is, La>Y>Lu.

Organoaluminium complexes of ortho-, meta-, para-anisidines: synthesis, structural studies and ROP of ε-caprolactone (and rac-lactide)

{[1,2-(OMe),NC₆H₄(μ-Me₂Al)](μ-Me₂Al)}₂ (1), [1,3-(Me₃AlOMe),NHC₆H₄(μ-Me₂Al)]₂ (2) and [1,4-(Me₃AlOMe),NHC₆H₄(μ-Me₂Al)]₂ (3) are all highly active for the ROP of ε-caprolactone.

Synthesis of binuclear phenoxyimino organoaluminum complexes and their use as the catalyst precursors for efficient ring-opening polymerisation of ε-caprolactone

A series of novel binuclear phenoxyimino organoaluminum complexes of the type [(RN=CH)C6H3OAlMe2]2 [R = C6H5 (2a), 2,6-(i)Pr2C6H3 (2b), 2,6-Ph2C6H3 (2c), adamantyl (2d), (t)Bu (2e)] have been prepared in high yields, and these complexes were identified by (1)H, (13)C NMR and elemental analysis. Structural analysis for 2a-e revealed that these complexes have a distorted tetrahedral geometry around Al and both the Al-O and the Al-N bond distances were considerably influenced by substituents in the imino groups. The complexes were tested as catalyst precursors for ring-opening polymerisation (ROP) of ε-caprolactone (CL) in the presence of BnOH, and their catalytic activities were strongly affected by the catalyst structures and polymerisation conditions. An efficient living ROP has been achieved using the 2b/BnOH system.