Who Wins: Pesci, Peters, or Deacon? Intrinsic Reactivity Orders for Organocuprate Formation via Ligand Decomposition

Pd-Catalyzed desulfitative arylation of olefins by N-methoxysulfonamide

A novel Pd-catalyzed protocol for the desulfitative Heck-type reaction of N-methoxy aryl sulfonamides with alkenes was reported. The cross-coupling reaction was performed successfully with a variety of olefins to obtain aryl alkenes. Different substituents on the aromatic ring of N-methoxysulfonamides were also found to be compatible with the reaction conditions. Expectedly, the reaction proceeds through CuCl₂-promoted generation of the nitrogen radical and subsequent desulfonylation under thermal conditions to afford the aryl radical for the Pd-catalyzed coupling reaction. N-Methoxysulfonamide was further exploited for the synthesis of symmetrical biaryls in the presence of CuCl₂.

Mechanistic Studies of the Palladium-Catalyzed Desulfinative Cross-Coupling of Aryl Bromides and (Hetero)Aryl Sulfinate Salts

Pyridine and related heterocyclic sulfinates have recently emerged as effective nucleophilic coupling partners in palladium-catalyzed cross-coupling reactions with (hetero)aryl halides. These sulfinate reagents are straightforward to prepare, stable to storage and coupling reaction conditions, and deliver efficient reactions, thus offering many advantages, compared to the corresponding boron-derived reagents. Despite the success of these reactions, there are only scant details of the reaction mechanism. In this study, we use structural and kinetic analysis to investigate the mechanism of these important coupling reactions in detail. We compare a pyridine-2-sulfinate with a carbocyclic sulfinate and establish different catalyst resting states, and turnover limiting steps, for the two classes of reagent. For the carbocyclic sulfinate, the aryl bromide oxidative addition complex is the resting state intermediate, and transmetalation is turnover-limiting. In contrast, for the pyridine sulfinate, a chelated Pd(II) sulfinate complex formed post-transmetalation is the resting-state intermediate, and loss of SO2 from this complex is turnover-limiting. We also investigated the role of the basic additive potassium carbonate, the use of which is crucial for efficient reactions, and deduced a dual function in which carbonate is responsible for the removal of free sulfur dioxide from the reaction medium, and the potassium cation plays a role in accelerating transmetalation. In addition, we show that sulfinate homocoupling is responsible for converting Pd(OAc)2 to a catalytically active Pd(0) complex. Together, these studies shed light on the challenges that must be overcome to deliver improved, lower temperature versions of these synthetically important processes.

Carbon–sulfur bond strength in methanesulfinate and benzenesulfinate ligands directs decomposition of Np(v) and Pu(v) coordination complexes

Adjusting intra-ligand bond strengths in actinide sulfinate complexes directs towards alternative cleavage of carbon–sulfur or actinide–sulfinate bonds.

Formation and hydrolysis of gas-phase [UO2 (R)]+ : R═CH3 , CH2 CH3 , CH═CH2 , and C6 H5

The goals of the present study were (a) to create positively charged organo-uranyl complexes with general formula [UO₂ (R)]⁺ (eg, R═CH₃ and CH₂ CH₃ ) by decarboxylation of [UO₂ (O₂ C─R)]⁺ precursors and (b) to identify the pathways by which the complexes, if formed, dissociate by collisional activation or otherwise react when exposed to gas-phase H₂ O. Collision-induced dissociation (CID) of both [UO₂ (O₂ C─CH₃ )]⁺ and [UO₂ (O₂ C─CH₂ CH₃ )]⁺ causes H⁺ transfer and elimination of a ketene to leave [UO₂ (OH)]⁺ . However, CID of the alkoxides [UO₂ (OCH₂ CH₃ )]⁺ and [UO₂ (OCH₂ CH₂ CH₃ )]⁺ produced [UO₂ (CH₃ )]⁺ and [UO₂ (CH₂ CH₃ )]⁺ , respectively. Isolation of [UO₂ (CH₃ )]⁺ and [UO₂ (CH₂ CH₃ )]⁺ for reaction with H₂ O caused formation of [UO₂ (H₂ O)]⁺ by elimination of ·CH₃ and ·CH₂ CH₃ : Hydrolysis was not observed. CID of the acrylate and benzoate versions of the complexes, [UO₂ (O₂ C─CH═CH₂ )]⁺ and [UO₂ (O₂ C─C₆ H₅ )]⁺ , caused decarboxylation to leave [UO₂ (CH═CH₂ )]⁺ and [UO₂ (C₆ H₅ )]⁺ , respectively. These organometallic species do react with H₂ O to produce [UO₂ (OH)]⁺ , and loss of the respective radicals to leave [UO₂ (H₂ O)]⁺ was not detected. Density functional theory calculations suggest that formation of [UO₂ (OH)]⁺ , rather than the hydrated U^V O₂ ⁺ , cation is energetically favored regardless of the precursor ion. However, for the [UO₂ (CH₃ )]⁺ and [UO₂ (CH₂ CH₃ )]⁺ precursors, the transition state energy for proton transfer to generate [UO₂ (OH)]⁺ and the associated neutral alkanes is higher than the path involving direct elimination of the organic neutral to form [UO₂ (H₂ O)]⁺ . The situation is reversed for the [UO₂ (CH═CH₂ )]⁺ and [UO₂ (C₆ H₅ )]⁺ precursors: The transition state for proton transfer is lower than the energy required for creation of [UO₂ (H₂ O)]⁺ by elimination of CH═CH₂ or C₆ H₅ radical.

Formation and reactions of the 1, 8-naphthyridine (napy) ligated geminally dimetallated phenyl complexes [(napy)Cu2(Ph)]+, [(napy)Ag2(Ph)]+ and [(napy)CuAg(Ph)]. EUROPEAN JOURNAL OF MASS SPECTROMETRY (CHICHESTER, ENGLAND) 2019;25:30-43. [PMID: 30773925 DOI: 10.1177/1469066718795959] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Gas-phase ion trap mass spectrometry experiments and density functional theory calculations have been used to examine the routes to the formation of the 1,8-naphthyridine (napy) ligated geminally dimetallated phenyl complexes [(napy)Cu₂(Ph)]⁺, [(napy)Ag₂(Ph)]⁺ and [(napy)CuAg(Ph)]⁺ via extrusion of CO₂ or SO₂ under collision-induced dissociation conditions from their corresponding precursor complexes [(napy)Cu₂(O₂CPh)]⁺, [(napy)Ag₂(O₂CPh)]⁺, [(napy)CuAg(O₂CPh)]⁺ and [(napy)Cu₂(O₂SPh)]⁺, [(napy)Ag₂(O₂SPh)]⁺, [(napy)CuAg(O₂SPh)]⁺. Desulfination was found to be more facile than decarboxylation. Density functional theory calculations reveal that extrusion proceeds via two transition states: TS1 enables isomerization of the O, O-bridged benzoate to its O-bound form; TS2 involves extrusion of CO₂ or SO₂ with the concomitant formation of the organometallic cation and has the highest barrier. Of all the organometallic cations, only [(napy)Cu₂(Ph)]⁺ reacts with water via hydrolysis to give [(napy)Cu₂(OH)]⁺, consistent with density functional theory calculations which show that hydrolysis proceeds via the initial formation of the adduct [(napy)Cu₂(Ph)(H₂O)]⁺ which then proceeds via TS3 in which the coordinated H₂O is deprotonated by the coordinated phenyl anion to give the product complex [(napy)Cu₂(OH)(C₆H₆)]⁺, which then loses benzene.

Mechanistic understanding of catalysis by combining mass spectrometry and computation

The combination of mass spectrometry and computational chemistry has been proven to be powerful for exploring reaction mechanisms. The former provides information of reaction intermediates, while the latter gives detailed reaction energy profiles.

Pd-Catalyzed decarboxylative alkynylation of alkynyl carboxylic acids with arylsulfonyl hydrazides via a desulfinative process

The decarboxylative alkynylation of alkynyl carboxylic acids and arylsulfonyl hydrazides by desulfinative coupling could provide aryl alkynes in satisfactory yields by either judiciously selecting palladium catalysts or modulating phosphine ligands under mild conditions.

Cobaltocenylidene: A Mesoionic Metalloceno Carbene, Stabilized in a Gold(III) Complex

Oxidative addition of cobaltoceniumdiazonium bis(hexafluoridophosphate) with (pseudo)halide aurates gave gold(III) complexes containing zwitterionic cobaltoceniumide as a ligand. Its selenium derivative, cobaltoceniumselenolate, was obtained by an electrophilic aromatic substitution reaction of iodocobaltocenium iodide with Na2 Se. Spectroscopic and structural data in combination with DFT calculations showed that this cobaltocenylidene species is a mesoionic carbene quite different from common N-heterocyclic carbenes. Its ligand properties (TEP, singlet-triplet gap, nucleophilicity, π-acidity, Brønsted basicity) are in part comparable to those of cyclic (amino)(alkyl/aryl)carbenes. Electrochemistry data showed that the mesoionic cobaltoceniumides are more electron-rich than their parent ferrocenes. The reversible reduction of the tricyanido gold complex appears 50 mV negative of the cobaltocenium/cobaltocene couple, whereas that of the selenide derivative is shifted cathodically by 550 mV.

Divalent and trivalent gas-phase coordination complexes of californium: evaluating the stability of Cf(ii)

The divalent oxidation state is increasingly stable relative to the trivalent state for the later actinide elements, with californium the first actinide to exhibit divalent chemistry under moderate conditions. Although there is evidence for divalent Cf in solution and solid compounds, there are no reports of discrete complexes in which Cf(II) is coordinated by anionic ligands. Described here is the divalent Cf methanesulfinate coordination complex, Cf(II)(CH3SO2)3(-), prepared in the gas phase by reductive elimination of CH3SO2 from Cf(III)(CH3SO2)4(-). Comparison with synthesis of the corresponding Sm and Cm complexes reveals reduction of Cf(III) and Sm(III), and no evidence for reduction of Cm(III). This reflects the comparative 3+/2+ reduction potentials: Cf(3+) (-1.60 V) ≈ Sm(3+) (-1.55 V) ≫ Cm(3+) (-3.7 V). Association of O2 to the divalent complexes is attributed to formation of superoxides, with recovery of the trivalent oxidation state. The new gas-phase chemistry of californium, now the heaviest element to have been studied in this manner, provides evidence for Cf(II) coordination complexes and similar chemistry of Cf and Sm.

Activation of carbon dioxide by a terminal uranium-nitrogen bond in the gas-phase: a demonstration of the principle of microscopic reversibility

Activation of CO2 is demonstrated by its spontaneous dissociative reaction with the gas-phase anion complex NUOCl2(-), which can be considered as NUO(+) coordinated by two chloride anion ligands. This reaction was previously predicted by density functional theory to occur exothermically, without barriers above the reactant energy. The present results demonstrate the validity of the prediction of microscopic reversibility, and provide a rare case of spontaneous dissociative addition of CO2 to a gas-phase complex. The activation of CO2 by NUOCl2(-) proceeds by conversion of a U[triple bond, length as m-dash]N bond to a U[double bond, length as m-dash]O bond and creation of an isocyanate ligand to yield the complex UO2(NCO)Cl2(-), in which uranyl, UO2(2+), is coordinated by one isocyanate and two chloride anion ligands. This activation of CO2 by a uranium(vi) nitride complex is distinctive from previous reports of oxidative insertion of CO2 into lower oxidation state U(iii) or U(iv) solid complexes, during which both C-O bonds remain intact. This unusual observation of spontaneous addition and activation of CO2 by NUOCl2(-) is a result of the high oxophilicity of uranium. If the computed Gibbs free energy of the reaction pathway, rather than the energy, is considered, there are barriers above the reactant asymptotes such that the observed reaction should not proceed under thermal conditions. This result provides a demonstration that energy rather than Gibbs free energy determines reactivity under low-pressure bimolecular conditions.

Mechanistic insights from mass spectrometry: examination of the elementary steps of catalytic reactions in the gas phase

Real-time mass spectrometric monitoring of speciation in a catalytic reaction while it is occurring provides powerful insights into mechanistic aspects of the reaction, but cannot be expected to elucidate all details. However, mass spectrometers are not limited just to analysis: they can serve as reaction vessels in their own right, and given their powers of separation and activation in the gas phase, they are also capable of generating and isolating reactive intermediates. We can use these capabilities to help fill in our overall understanding of the catalytic cycle by examining the elementary steps that make it up. This article provides examples of how these simple reactions have been examined in the gas phase.

Gas phase studies of the Pesci decarboxylation reaction: synthesis, structure, and unimolecular and bimolecular reactivity of organometallic ions

CONSPECTUS: Decarboxylation chemistry has a rich history, and in more recent times, it has been recruited in the quest to develop cheaper, cleaner, and more efficient bond-coupling reactions. Thus, over the past two decades, there has been intense investigation into new metal-catalyzed reactions of carboxylic substrates. Understanding the elementary steps of metal-mediated transformations is at the heart of inventing new reactions and improving the performance of existing ones. Fortunately, during the same time period, there has been a convergence in mass spectrometry (MS) techniques, which allows these catalytic processes to be examined efficiently in the gas phase. Thus, electrospray ionization (ESI) sources have been combined with ion-trap mass spectrometers, which in turn have been modified to either accept radiation from tunable OPO lasers for spectroscopy based structural assignment of ions or to allow the study of ion-molecule reactions (IMR). The resultant "complete" gas-phase chemical laboratories provide a platform to study the elementary steps of metal-catalyzed decarboxylation reactions in exquisite detail. In this Account, we illustrate how the powerful combination of ion trap mass spectrometry experiments and DFT calculations can be systematically used to examine the formation of organometallic ions and their chemical transformations. Specifically, ESI-MS allows the transfer of inorganic carboxylate complexes, [RCO2M(L)n](x), (x = charge) from the condensed to the gas phase. These mass selected ions serve as precursors to organometallic ions [RM(L)n](x) via neutral extrusion of CO2, accessible by slow heating in the ion trap using collision induced dissociation (CID). This approach provides access to an array of organometallic ions with well-defined stoichiometry. In terms of understanding the decarboxylation process, we highlight the role of the metal center (M), the organic group (R), and the auxiliary ligand (L), along with cluster nuclearity, in promoting the formation of the organometallic ion. Where isomeric organometallic ions are generated and normal MS approaches cannot distinguish them, we describe approaches to elucidate the decarboxylation mechanism via determination of their structure. These "unmasked" organometallic ions, [RM(L)n](x), can also be structurally interrogated spectroscopically or via CID. We have thus compared the gas-phase structures and decomposition of several highly reactive and synthetically important organometallic ions for the first time. Perhaps the most significant aspect of this work is the study of bimolecular reactions, which provides experimental information on mechanistically obscure bond-formation and cross-coupling steps and the intrinsic reactivity of ions. We have sought to understand transformations of substrates including acid-base and hydrolysis reactions, along with reactions resulting in C-C bond formation. Our studies also allow a direct comparison of the performance of different metal catalysts in the individual elementary steps associated with protodecarboxylation and decarboxylative alkylation cycles. Electronic structure (DFT and ab initio) and dynamics (RRKM) calculations provide further mechanistic insights into these reactions. The broad implications of this research are that new reactions can be discovered and that the performance of metal catalysts can be evaluated in terms of each of their elementary steps. This has been particularly useful for the study of metal-mediated decarboxylation reactions.

Copper mediated decyano decarboxylative coupling of cyanoacetate ligands: Pesci versus Lewis acid mechanism

A combination of gas-phase ion trap multistage mass spectrometry (MSⁿ) experiments and density functional theory (DFT) calculations have been used to examine the mechanisms of the sequential decomposition reactions of copper cyanoacetate anions, [(NCCH₂CO₂)₂Cu]⁻.

Sulfinate derivatives: dual and versatile partners in organic synthesis

Recent advances in the preparation and synthetic uses of sulfinic acids and their derivatives are highlighted in this review. They are used as versatile partners in sulfonylative and desulfitative reactions.

Palladium-catalyzed intermolecular desulfinylative cross-coupling of heteroaromatic sulfinates

Beauty lies in simplicity: An efficient and environmentally benign palladium-catalyzed protocol has been developed using a sulfinate as a nucleophilic coupling partner. The sulfinate position is arylated chemoselectively in very good yields. The bench-stable, non-hygroscopic heteroaromatic sulfinate salts rapidly undergo cross-coupling without the need of a co-catalyst, base, or additives (see scheme; mw = microwave).