Highly 3,4-Selective Living Polymerization of Isoprene and Copolymerization with ε-Caprolactone by an Amidino N-Heterocyclic Carbene Ligated Lutetium Bis(alkyl) Complex

Preparation and Characterization of Soft-Hard Block Copolymer of 3,4-IP-b-s-1,2-PBD Using a Robust Iron-Based Catalyst System

A series of well-defined diblock copolymers, namely, 3,4-polyisoprene-block-syndiotactic-1,2-polybutadiene (3,4-PI-b-s-1,2-PBD), with a soft-hard block sequence were synthesized via an in situ sequential polymerization process using a robust iron-based catalytic system Fe(acac)3/(isocyanoimino) triptenylphosphorane (IITP)/AliBu3. This catalyst exhibits vigorous activity and temperature tolerance, achieving a polymerization activity of 5.41 × 106 g mol(Fe)-1 h-1 at 70 °C with a [IP]/[Fe] ratio of 15,000. Moreover, the quasi-living polymerization characteristics of the catalyst were verified through kinetic experiments. The first-stage polymerization of isoprene (IP) is performed at 30 °C to give a soft 3,4-PI block, and then a quantitative amount of 1,3-butadiene was added in situ to the quasi-living polymerization system to produce a second hard s-1,2-PBD. The s-1,2-PBD segments in block copolymers display a rodlike morphology contrasting with the spherulitic morphology characteristic of s-1,2-PBD homopolymers. The precise tunability of the length of the soft and hard chain segments of these novel elastic materials with the feed ratio of IP and BD, endowing them with outstanding mechanical properties and excellent dynamic mechanical properties, which are expected to be promising high-performance rubber materials.

Sc and Y bis(alkyl) complexes supported by bidentate and tridentate amidinate ligands. Synthesis, structure and catalytic activity in polymerization of isoprene and 1-heptene

A series of bis(alkyl) complexes {(tBu)C[N(2,6-Me₂C₆H₃)]₂}Ln(CH₂SiMe₃)₂(THF)_n (Ln = Y, n = 1 (1); Ln = Sc, n = 1 (2)), {2-[Ph₂P(O)]C₆H₄NC(tBu)N(2,6-Me₂C₆H₃)}Sc(CH₂SiMe₃)₂ (3), {2-[Ph₂P(NPh)]C₆H₄NC(tBu)N(2,6-Me₂C₆H₃)}Sc(CH₂SiMe₃)₂ (4) coordinated by bidentate (N,N) and tridentate (N,N,O; N,N,N) amidinate ligands are synthesized using an alkane elimination approach. Yttrium complex 1 demonstrated a half-life of ∼2.5 days at room temperature in benzene-D6 (C₆D₆) solution, whereas scandium complexes proved to be much more stable (25 d (2), 30 d (3) and 42 d (4)). Complexes 1-4 as a part of ternary catalytic systems 1-4/TB, HNB/AlR₃ (AlR₃ = AliBu₃, AliBu₂H; TB = [Ph₃C][B(C₆F₅)₄], HNB = [PhNHMe₂][B(C₆F₅)₄]) demonstrated high catalytic activity in isoprene polymerization and enable 80%-100% conversion of 1000 equivalents of monomer into polymer at 25 °C within 3-180 min. The isolated polyisoprenes feature predominantly cis-1,4-regularity (69.2%-87.3%) and polydispersities M_w/M_n = 2.26-8.92. Moreover, the binary (2/TB) and ternary (1-4/TB/10 AliBu₃) systems initiate 1-heptene polymerization providing 40%-100% conversion of 500 equivalents of monomer in 24 h at 25 °C giving polymer samples with M_n = 1.55-190.2 × 10³ and M_w/M_n = 1.55-3.87.

Late Lanthanide Macrocyclic Tetra-NHC Complexes

An isostructural set of macrocyclic tetra-N-heterocyclic carbene (NHC) complexes were synthesized on late lanthanides including Lu, Yb, Ho, Dy, and Gd. They were characterized by single-crystal X-ray diffraction, multinuclear NMR, electrochemistry, and SQUID magnetometry. Solid-state structures show that all complexes are in a highly distorted square-pyramidal geometry with an axial HMDS ligand. ¹H NMR for Lu, Yb, and Dy demonstrates that these geometries are maintained in solution. Electrochemical measurements on the Yb complex show that the NHCs are very strong σ-donors compared to other organometallic Yb complexes. Magnetic measurements of the Yb and Dy complexes reveal slow relaxation of the magnetization in both complexes. The highly anisotropic Dy complex possesses an energy barrier to spin reversal of 52.42 K/36.43 cm^-1 and waist-restricted hysteresis up to 2.8 K. Finally, an 18-atom macrocycle variant of the Lu complex was synthesized for comparison in reactivity and stability. These complexes are the first lanthanides prepared with macrocyclic NHCs and suggest that NHCs may be a promising ligand for developing single-molecule magnets.

Rare-Earth-Metal Complexes Bearing an Iminodibenzyl-PNP Pincer Ligand: Synthesis and Reactivity toward 3,4-Selective Polymerization of 1,3-Dienes

A PNP-pincer ligand provides a versatile ligation framework, which is highly useful in organometallic chemistry and catalytic chemistry. In this work, by a de novo strategy, a simple and efficient synthetic pathway, has been developed to prepare the new iminodibenzyl-based PNP pincer proligand ^imin-RPNP(Li or H) (R = isopropyl, phenyl). By employing salt metathesis or direct alkyl elimination, we successfully synthesized a series of iminodibenzyl-PNP rare-earth-metal (Ln = Sc, Y, Dy, Ho, Er, Tm, Lu) complexes and characterized them by NMR and X-ray diffraction analyses. Upon addition of a borate and triisobutylaluminum (TIBA), the rare-earth-metal complexes 2-Y, 2-Dy, 2-Ho, 2-Er, and 2-Tm bearing the ^imin-PhPNP ligand exhibited unexpectedly high 3,4-selectivity (up to 95%) for the polymerization of 1,3-dienes (isoprene and myrcene); in particular, the chosen yttrium complex 2-Y promoted the 1,3-diene polymerization in a living manner. A computational study suggested that the sterically congested configuration around the metal center imposed by the ^imin-RPNP ligand might be the main reason for this unusual selectivity.

Controlled, one-pot synthesis of recyclable poly(1,3-diene)-polyester block copolymers, catalyzed by yttrium β-diketiminate complexes

The one-pot synthesis of well-defined block copolymers of olefins/1,3-dienes and polar monomers, such as cyclic esters and acrylates has long been the focus of intense research. Cationic alkyl rare earth metal catalysts, activated by organoborates, have shown to be promising for the polymerization of isoprene or styrene and ε-caprolactone. In this study, we synthesize a series of yttrium bis(alkyl) complexes supported by simple β-diketiminate ancillary ligands. Subtle changes have been made to the β-diketiminate ligand framework to elucidate the effect of ligand structure on the rate and selectivity of olefin/1,3-diene and cyclic ester polymerization, with small ligand changes having a large impact on the resulting polymerizations. Generation of the active cationic species was easily streamlined by identification of appropriate catalyst : organoborate ratios, allowing for high catalyst efficiencies. Notably, we demonstrate the first cationic rare earth metal alkyl-initiated polymerization of δ-valerolactone and ε-decalactone as well as introduced five new block copolymer morphologies. In addition, selective degradation of the ester block in poly(isoprene-b-caprolactone) enabled recovery of the polyisoprene block with identical spectroscopic and thermal properties. Significantly, recopolymerization of the recovered poly(1,3-diene) with fresh ε-caprolactone reproduced the desired diblocks with nearly identical thermal and physical properties to those of virgin copolymer, illustrating a plausible recycling scheme for these materials.

Ligand features that promote one-pot block copolymerization of 1,3-dienes and cyclic esters were realized with yttrium β-diketiminate complexes. Depolymerization and repolymerization of the polyester block introduced a plausible recycling strategy.

Amido-trihydroquinoline ligated rare-earth metal complexes for polymerization of isoprene

In combination with a borate, the amido-trihydroquinoline ligated rare-earth metal complexes (Ln = Y, Lu) showed moderate catalytic activities for isoprene polymerization to generate 1,4-enriched polyisoprenes.

Side-Arm Assisted Anilido-Imine Based Rare-Earth Metal Complexes for Isoprene Stereoselective Polymerization

Anilido-imine ligands o-C₆H₄(NHAr₁)(CH=NAr₂), in which Ar₁ is 2,6-diisopropylbenzyl group and Ar₂ contains fluorine (HL₁) or methoxyl (HL₂) group on ortho-position of phenyl substituent, were synthesized for constructing rare-earth metals based complexes of 1a–1c (HL₁ based Sc, Lu, Y) and 2a–2c (HL₂ based Sc, Lu, Y). Based on their NMR spectra and X-ray single-crystal structures, the side-arm group of -F and -OMe is identified to chelate to the corresponding central metal. The twisted angles between two planes formed by chelated heteroatoms (N, N, F for HL₁ and N, N, O for HL₂) are observed, in which the largest dihedral angle (53.3°) for HL₁-Y and the smallest dihedral angle (44.32°) for HL₂-Sc are detected. After being activated by AlⁱBu₃ and [Ph₃C][B(C₆F₅)₄], these catalysts showed great activity for isoprene polymerization. Bearing the same ligand HL₁, smaller scandium based complex 1a and middle size of lutetium based 1b provided lower cis-1,4-selectivity (57.3% and 64.2%), larger yttrium complex 1c displayed high cis-1,4-selectivity (84%). Chelating by crowded HL₂, small size of scandium complex 2a provided impressive trans-1,4-selectivity (93.0%), middle lutetium based 2b displayed non-selectivity and larger yttrium complex 2c showed clear cis-1,4-selectivity (83.3%). Moreover, 2a/AlⁱBu₃ system showed the quasi-living chain transfer capability.

An unsymmetrical binuclear iminopyridine-iron complex and its catalytic isoprene polymerization

A series of chloride-bridged unsymmetrical mixed Fe(ii)-HS/Fe(ii)-LS binuclear structures has been prepared and characterized. Upon activation with MAO, highly efficient catalytic polymerization of isoprene was achieved, delivering an ultra-high molecular weight (catalyst loading = 2.5 ppm, Mn = 1.8 × 106 g mol-1, Mw/Mn = 1.4).

Carbonyl group and carbon dioxide activation by rare-earth-metal complexes

The rare-earth elements (Ln = Sc, Y, La-Lu) are widely used in stoichiometric and catalytic carbonyl group transformations. Sufficient availability, non-toxicity, high oxophilicity, tunable ion size/Lewis acidity and enhanced ligand exchangeability have been major driving factors for their successful implementation. Routinely employed reagents for stoichiometric carbonyl group transformations are divalent ytterbium and samarium compounds (e.g., ketone reduction), bimetallic CeCl3/LiR (C-C coupling), or ceric ammonium nitrate CAN (cyclic ketone oxidation). Rare-earth-metal triflates, and in particular Sc(OTf)3, are prominent examples of Lewis acid catalysts for versatile use in organic synthesis (e.g., Aldol and Michael reactions). Moreover, Ln(ii) and Ln(iii) complexes efficiently catalyze the (co)polymerization of carbonyl group-containing monomers including lactones, lactides, acrylates, and carbon dioxide. Featuring the most notorious greenhouse gas, CO2 is currently assessed as a cheap, abundant, and non-toxic C1 building block. Ln(iii) complexes are not only capable of efficient CO2 capture via reversible insertion but also of CO2 activation for catalytic conversions (copolymerization/cycloaddition with epoxides). This perspective focuses on structurally elucidated Ln complexes resulting from ketone or carbonyl derivative activation/insertion as well as carbon dioxide insertion products. The respective compounds will be sorted by structural motifs and, if applicable, details on reactivity and feasibility of catalytic reactions are presented. The article is subdivided in three parts: (i) donor and insertion products of ketones and aldehydes, (ii) redox-enhanced activation of carbonyl derivatives, and (iii) CO2 insertion/redox products and homogeneous catalytic conversion.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.

Catalysts for the Controlled Polymerization of Conjugated Dienes

Since its first discovery at the beginning of the 1960s […] 

C 1 and Cs 2-pyridylethylanilido zirconium(iv), yttrium(iii) and lutetium(iii) complexes: synthesis, characterization and catalytic activity in the isoprene polymerization

Organolanthanide containing C_s and C₁-symmetric 2-pyridylethylanilido ligands have been scrutinized as catalyst precursors for the isoprene polymerization.

Synthesis, structure and reactivity of guanidinate rare earth metal bis(o-aminobenzyl) complexes

A series of guanidinate rare-earth dialkyl complexes were synthesized. Their reactivity towards small molecules has been disclosed.

Parameters for the RM1 Quantum Chemical Calculation of Complexes of the Trications of Thulium, Ytterbium and Lutetium

The RM1 quantum chemical model for the calculation of complexes of Tm(III), Yb(III) and Lu(III) is advanced. Subsequently, we tested the models by fully optimizing the geometries of 126 complexes. We then compared the optimized structures with known crystallographic ones from the Cambridge Structural Database. Results indicate that, for thulium complexes, the accuracy in terms of the distances between the lanthanide ion and its directly coordinated atoms is about 2%. Corresponding results for ytterbium and lutetium are both 3%, levels of accuracy useful for the design of lanthanide complexes, targeting their countless applications.

Transition metal complexes bearing tridentate ligands for precise olefin polymerization

This review covers key developments in the design of post-metallocene transition metal complexes (precatalysts) bearing tridentate chelating ligands and their application in olefin polymerization.

Alpha and beta diimine cobalt complexes in isoprene polymerization: a comparative study

Isoprene was polymerized by diimine cobalt catalyst in the presence of DEAC to produce cis-1,4 and 3,4 polyisoprene.

Bis(alkyl) rare-earth complexes coordinated by bulky tridentate amidinate ligands bearing pendant Ph2PO and Ph2PNR groups. Synthesis, structures and catalytic activity in stereospecific isoprene polymerization

Replacement of Ph₂PO group by Ph₂PNPh leads to a switch of stereoselectivity from cis-1,4 to trans-1,4.

Catalytic behaviour in the ring-opening polymerisation of organoaluminiums supported by bulky heteroscorpionate ligands

A series of alkyl organoaluminium complexes based on bulky heteroscorpionate ligands were designed as catalysts for the ring-opening polymerisation of cyclic esters. Thus, the treatment of AlX3 (X = Me, Et) with bulky acetamide or thioacetamide heteroscorpionate ligands nbptamH (1) [nbptamH = N-naphthyl-2,2-bis(3,5-dimethylpyrazol-1-yl)thioacetamide], fbpamH (2) [fbpamH = N-fluorenyl-2,2-bis(3,5-dimethylpyrazol-1-yl)acetamide], ptbptamH (3) [ptbptamH = N-phenyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)thioacetamide], ntbptamH (4) [ntbptamH = N-naphthyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)thioacetamide], ptbpamH (5) [ptbpamH = N-phenyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)acetamide] and (S)-mtbpamH (6) [(S)-mtbpamH = (S)-(−)-N-α-methylbenzyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)acetamide] for 1 hour at 0 °C afforded the dialkyl aluminium complexes [AlX2{κ(2)-nbptam}] (X = Me 7, Et 8), [AlX2{κ(2)-fbpam}] (X = Me 9, Et 10), [AlX2{κ(2)-ptbptam}] (X = Me 11, Et 12), [AlX2{κ(2)-ntbptam}] (X = Me 13, Et 14), [AlX2{κ2(-)ptbpam}] (X = Me 15, Et 16) and [AlX2{κ(2)-(S)-mtbpam}] (X = Me 17, Et 18). The structures of the complexes were determined by spectroscopic methods and the X-ray crystal structure of 14 was also established. The alkyl-containing aluminium complexes 7–18 can act as efficient single-component initiators for the ring-opening polymerisation of ε-caprolactone and rac-lactide. The polymerisations are living, as evidenced by the narrow polydispersities of the isolated polymers and the linear nature of the number average molecular weight versus conversion plot. Finally, a comparative study of ring-opening polymerisation for new bulky heteroscorpionate aluminium initiators and the less congested aluminium analogues is reported.

Rare-earth metal alkyl complexes bearing an alkoxy N-heterocyclic carbene ligand: synthesis, characterization, catalysis for isoprene polymerization

The new rare-earth metal alkyl complexes bearing alkoxy NHC ligands were prepared, which showed moderate cis-1,4 selectivity for isoprene polymerization.

Highly 3,4-selective living polymerization of 2-phenyl-1,3-butadiene with amidino N-heterocyclic carbene ligated rare-earth metal bis(alkyl) complexes

2-Phenyl-1,3-butadiene was polymerized using an amidino N-heterocyclic carbene lutetium bis(alkyl) precursor in high 3,4-selectivity (96.9%) and a living mode to afford a new plastic polydiene with a high T_g of 56.1 °C.

Bis(alkyl) rare-earth complexes supported by a new tridentate amidinate ligand with a pendant diphenylphosphine oxide group. Synthesis, structures and catalytic activity in isoprene polymerization

The introduction of a pendant Ph₂P(O) group into an amidinate ligand resulted in high 1,4-cis selectivity (96.6%) while maintaining very high activity.

The behaviour of β-triketimine cobalt complexes in the polymerization of isoprene

Cobalt complexes of β-triketimines activated by Et₂AlCl polymerize isoprene to give up to 80%cis-1,4 with 20% 3,4 polymer, at 35 °C.