Highly Selective Olefin Trimerization Catalysis by a Borane-Activated Titanium Trimethyl Complex

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Selective Trimerization of α-Olefins with Immobilized Chromium Catalyst for Lubricant Base Oils

The demand for poly(α-olefin)s (PAOs), which are high-performance group IV lubricant base oils, is increasingly high. PAOs are generally produced via the cationic oligomerization of 1-decene, wherein skeleton rearrangement inevitably occurs in the products. Hence, a transition-metal-based catalytic process that avoids rearrangement would be a valuable alternative for cationic oligomerization. In particular, transition-metal-catalyzed selective trimerization of α-olefins has the potential for success. In this study, (N,N′,N″-tridodecyltriazacyclohexane)CrCl3 complex was reacted with MAO-silica (MAO, methylaluminoxane) for the preparation of a supported catalyst, which exhibited superior performance in selective α-olefin trimerization compared to that of the corresponding homogeneous catalyst, enabling the preparation of α-olefin trimers at ~200 g scale. Following hydrogenation, the prepared 1-decene trimer (C30H62) exhibited better lubricant properties than those of commercial-grade PAO-4 (kinematic viscosity at 40 °C, 15.1 vs. 17.4 cSt; kinematic viscosity at 100 °C, 3.9 vs. 3.9 cSt; viscosity index, 161 vs. 123). Moreover, it was shown that 1-octene/1-dodecene mixed co-trimers (i.e., a mixture of C24H50, C28H58, C32H66, and C36H74), generated by the selective supported Cr catalyst, exhibited outstanding lubricant properties analogous to those observed for the 1-decene trimer (C30H62).

Fair Look at Coordination Oligomerization of Higher α-Olefins

Coordination catalysis is a highly efficient alternative to more traditional acid catalysis in the oligomerization of α-olefins. The distinct advantage of transition metal-based catalysts is the structural homogeneity of the oligomers. Given the great diversity of the catalysts and option of varying the reaction conditions, a wide spectrum of processes can be implemented. In recent years, both methylenealkanes (vinylidene dimers of α-olefins) and structurally uniform oligomers with the desired degrees of polymerization have become available for later use in the synthesis of amphiphilic organic compounds and polymers, high-quality oils or lubricants, and other prospective materials. In the present review, we discussed the selective dimerization and oligomerization of α-olefins, catalyzed by metallocene and post-metallocene complexes, and explored the prospects for the further applications of the coordination α-olefin dimers and oligomers.

Titanium-based phenoxy-imine catalyst for selective ethylene trimerization: effect of temperature on the activity, selectivity and properties of polymeric side products

A thermal switch of selectivity for a phenoxy-imine titanium catalyst was studied by combining kinetic studies and a “polymer-to-catalyst” approach.

High-Performance Jet Fuels Derived from Bio-Based Alkenes by Iron-Catalyzed [2+2] Cycloaddition

A series of high-performance cycloparaffinic fuels have been generated by [2+2] cycloaddition of the bio-derived alkenes 1-hexene, isoprene, and 1-pentene, catalyzed by a low-valent iron pyridine(diimine) complex [(^Me PDI)Fe(N₂ )₂ (μ-N₂ )] [^Me PDI=N,N'-(2,6-pyridinediyldiethylidyne)bis(2,6-dimethylbenzenamine)]. Reactions with 1-pentene and 1-hexene resulted in 85 % selectivity to 1,2-cyclobutanes, and 12 % selectivity to acyclic alkenes generated by β-hydride elimination. Self-dimerization of isoprene was sluggish and generated heavier oligomer products, but cross-dimerization of isoprene with 1-hexene afforded primarily a 1,3-cyclobutane product, along with isomers of acyclic C₁₁ mixed dimers. Hydrocarbon mixtures were hydrogenated and fractionally distilled to yield finished fuel mixtures in overall yields of 83-93 % at the multigram scale. The fuels exhibited densities ranging between 0.767 and 0.783 g mL^-1 , and net heats of combustion (NHOC) of up to 120.6 kBtu gal^-1 (43.8 MJ kg^-1 ). These values are higher than conventional synthetic paraffinic kerosenes owing to the higher density and ring strain afforded by the cyclobutane rings. The fuel mixtures also exhibited extremely low viscosities ranging from 2.38 to 4.78 mm²  s^-1 at -20 °C, due in part to the presence of the acyclic dimers. The excellent fuel properties of the product mixtures, selectivity for dimer products, high yields, and the ability to use simple bio-derived alkenes as substrates, make the [Fe]-catalyzed [2+2] cycloaddition of unactivated alkenes a compelling route to the synthesis of sustainable high-performance fuels.

Isotopic labelling in ethylene oligomerization: addressing the issue of 1-octene vs. 1-hexene selectivity

The selectivity-determining mechanistic steps of ethylene tetramerization and trimerization are evaluated in light of isotopic labeling experiments. A mechanism based upon a shared chromacycloheptane intermediate rather than the C-C coupling of chromacyclopentanes or Cr speciation into independent trimerization and tetramerization catalysts is consistent with the data, including observed upper limits on 1-octene selectivity.

A radical coupled pathway to a stable and terminally bound titanium methylidene

Radical coupling or oxidation of the titanium(iii)dimethyl precursor (PNP)Ti(CH₃)₂ produced the dimethyl compounds, (PNP)Ti(CH₃)₂(X) (X = TEMPO, OMes*, OTf), which then thermally extrude methane to cyclometallate (X = TEMPO) or form the methylidene (X = OMes* or OTf).

Methyl Complexes of the Transition Metals

Organometallic chemistry can be considered as a wide area of knowledge that combines concepts of classic organic chemistry, that is, based essentially on carbon, with molecular inorganic chemistry, especially with coordination compounds. Transition-metal methyl complexes probably represent the simplest and most fundamental way to view how these two major areas of chemistry combine and merge into novel species with intriguing features in terms of reactivity, structure, and bonding. Citing more than 500 bibliographic references, this review aims to offer a concise view of recent advances in the field of transition-metal complexes containing M-CH3 fragments. Taking into account the impressive amount of data that are continuously provided by organometallic chemists in this area, this review is mainly focused on results of the last five years. After a panoramic overview on M-CH3 compounds of Groups 3 to 11, which includes the most recent landmark findings in this area, two further sections are dedicated to methyl-bridged complexes and reactivity.

A chromium precursor for the Phillips ethylene trimerization catalyst: (2-ethylhexanoate)2CrOH

The conventional Phillips ethylene trimerization catalyst prepared by reacting Cr(EH)3 (EH = 2-ethylhexanoate), 2,5-dimethylpyrrole (Me2C4H2NH), Et3Al, and Et2AlCl in an aromatic hydrocarbon solvent was improved to obtain a congener composed of a new chromium precursor (EH)2CrOH, (Me2C4H2N)AlEt2, and Et3Al·ClAlEt2. Reaction of CrCl3 with 3 equiv. Na(EH) in water did not generate Cr(EH)3, but unexpectedly produced (EH)2CrOH. In comparison with the erratic catalytic performance of the original Phillips system, due to the ill-defined nature of the Cr(EH)3 source (16 or 6.8 × 10(6) g per mol-Cr h depending on the source), the improved system exhibited consistently high activity (54 × 10(6) g per mol-Cr h). Reaction of (EH)2CrOH with (Me2C4H2N)AlMe2·OEt2 afforded the dimeric Cr(II)-complex (6) coordinated by (η(5)-Me2C4H2N)AlMe2(NC4H2Me2) and μ2-κ(1):η(2)-Me2C4H2N ligands. 6 provided highly active species when activated with Et3Al·ClAlEt2.

Post-metallocenes in the industrial production of polyolefins

Research on "post-metallocene" polymerization catalysis ranges methodologically from fundamental mechanistic studies of polymerization reactions over catalyst design to material properties of the polyolefins prepared. A common goal of these studies is the creation of practically useful new polyolefin materials or polymerization processes. This Review gives a comprehensive overview of post-metallocene polymerization catalysts that have been put into practice. The decisive properties for this success of a given catalyst structure are delineated.

Preparation of ansa-metallocenes for production of poly(α-olefin) lubricants

An ansa-zirconocene bearing methyl substituents at all positions adjacent to the bridgehead [(-C(Ph)HC(Ph)H-)(η(5)-2,5-Me2C5H2)2ZrCl2] (4) was prepared in high yields (78%) through the reductive dimerization of 1,4-dimethyl-6-phenylfulvene utilizing ZrCl2·DME generated in situ. The structure of 4 was subsequently confirmed using X-ray crystallography. 4 exhibited excellent catalytic performance with regard to 1-decene oligomerization, which was carried out with the intention of preparing lubricant base stocks. High activities (21 × 10(6) g mol(-1) Zr h(-1) activity; TON = 150 000; TOF = 42 s(-1)) were observed at temperatures as high as 120 °C and the oligomer distribution was appropriate for lubricant application. The simulated distillation (SIMDIS) data confirmed that a wide range of oligomers were formed, ranging from the dimer (2-mer) to 20-mer. A minimal amount of the dimer and oligomers larger than the 10-mer was formed (13 and 25 wt%, respectively). Alternatively, a typical unbridged complex such as (η(5)-nBuC5H4)2ZrCl2 primarily produced dimers (54 wt%), whereas the ansa-zirconocene (EBI)ZrCl2 primarily produced oligomers larger than 10-mer (62 wt%). The methyl substituents at the positions adjacent to the bridgehead in 4 played a significant role in the catalytic performance.

A survey of pendant donor-functionalised (N,O) phosphine ligands for Cr-catalysed ethylene tri- and tetramerisation

Selected phosphine-based ligands plus chromium have been found to be promising candidates for MAO-free trimerisation and tetramerisation of ethylene.