A Broadly Applicable Strategy for Entry into Homogeneous Nickel(0) Catalysts from Air-Stable Nickel(II) Complexes

Expedited Synthesis of Metal Phosphides Maximizes Dispersion, Air Stability, and Catalytic Performance in Selective Hydrogenation

Metal phosphides have been hailed as potential replacements for scarce noble metal catalysts in many aspects of the hydrogen economy from hydrogen evolution to selective hydrogenation reactions. But the need for dangerous and costly phosphorus precursors, limited support dispersion, and low stability of the metal phosphide surface toward oxidation substantially lower the appeal and performance of metal phosphides in catalysis. We show here that a 1-step procedure that relies on safe and cheap precursors can furnish an air-stable Ni2P/Al2O3 catalyst containing 3.2 nm nanoparticles. Ni2P/Al2O3 1-step is kinetically competitive with the palladium-based Lindlar catalyst in selective hydrogenation catalysis, and a loading corresponding to 4 ppm Ni was sufficient to convert 0.1 mol alkyne. The 1-step synthetic procedure alters the surface ligand speciation of Ni2P/Al2O3, which protects the nanoparticle surface from oxidation, and ensures that 85 % of the initial catalytic activity was retained after the catalyst was stored under air for 1.5 years. Preparation of Ni2P on a variety of supports (silica, TiO2, SBA-15, ZrO2, C and HAP) as well as Co2P/Al2O3, Co2P/TiO2 and bimetallic NiCoP/TiO2 demonstrates the generality with which supported metal phosphides can be accessed in a safe and straightforward fashion with small sizes and high dispersion.

Ball-Milling toward Nickel(II) Diphosphine Complexes for Direct Use in Catalysis

Mechanochemistry turned out to be a powerful synthetic tool enabling the first efficient synthesis of nickel(II) complexes with diphosphines. It has been demonstrated that solventless ball-milling of nickel(II) halides with diphosphines leads to the [NiX2(diphosphine)] type compounds, which can be directly used in catalysis without any purification. Moreover, it was confirmed that despite the presence of impurities in the resulting complexes, their catalytic activity remains identical to those obtained via traditional solvent-based methods.

The development of cage phosphine 'DalPhos' ligands to enable nickel-catalyzed cross-couplings of (hetero)aryl electrophiles

Nickel-catalyzed cross-couplings of (hetero)aryl electrophiles with a diversity of nucleophiles (nitrogen, oxygen, carbon, and others) have evolved into competitive alternatives to well-established palladium- and copper-based protocols for the synthesis of (hetero)aryl products, including (hetero)anilines and (hetero)aryl ethers. A survey of the literature reveals that the use of cage phosphine (CgP) 'DalPhos' (DALhousie PHOSphine) bisphosphine-type ligands operating under thermal conditions currently offers the most broad substrate scope in nickel-catalyzed cross-couplings of this type, especially involving (hetero)aryl chlorides and phenol-derived electrophiles. The development and application of these DalPhos ligands is described in a ligand-specific manner that is intended to serve as a guide for the synthetic chemistry end-user.

Nickel-Based Catalysts for the Selective Monoarylation of Dichloropyridines: Ligand Effects and Mechanistic Insights

This report describes a detailed study of Ni phosphine catalysts for the Suzuki-Miyaura coupling of dichloropyridines with halogen-containing (hetero)aryl boronic acids. With most phosphine ligands these transformations afford mixtures of mono- and diarylated cross-coupling products as well as competing oligomerization of the boronic acid. However, a ligand screen revealed that PPh2Me and PPh3 afford high yield and selectivity for monoarylation over diarylation as well as minimal competing oligomerization of the boronic acid. Several key observations were made regarding the selectivity of these reactions, including: (1) phosphine ligands that afford high selectivity for monoarylation fall within a narrow range of Tolman cone angles (between 136° and 157°); (2) more electron-rich trialkylphosphines afford predominantly diarylated products, while less-electron rich di- and triarylphosphines favor monoarylation; (3) diarylation proceeds via intramolecular oxidative addition; and (4) the solvent (MeCN) plays a crucial role in achieving high monoarylation selectivity. Experimental and DFT studies suggest that all these data can be explained based on the reactivity of a key intermediate: a Ni0-π complex of the monoarylated product. With larger, more electron-rich trialkylphosphine ligands, this π complex undergoes intramolecular oxidative addition faster than ligand substitution by the MeCN solvent, leading to selective diarylation. In contrast, with relatively small di- and triarylphosphine ligands, associative ligand substitution by MeCN is competitive with oxidative addition, resulting in selective formation of monoarylated products. The generality of this method is demonstrated with a variety of dichloropyridines and chloro-substituted aryl boronic acids. Furthermore, the optimal ligand (PPh2Me) and solvent (MeCN) are leveraged to achieve the Ni-catalyzed monoarylation of a broader set of dichloroarene substrates.

(Phenoxyimine)nickel-Catalyzed C(sp2)-C(sp3) Suzuki-Miyaura Cross-Coupling: Evidence for a Recovering Radical Chain Mechanism

Phenoxyimine (FI)-nickel(II)(2-tolyl)(DMAP) compounds were synthesized and evaluated as precatalysts for the C(sp2)-C(sp3) Suzuki-Miyaura cross coupling of (hetero)arylboronic acids with alkyl bromides. With 5 mol % of the optimal (MeOMeFI)Ni(Aryl)(DMAP) precatalyst, the scope of the cross-coupling reaction was established and included a variety of (hetero)arylboronic acids and alkyl bromides (>50 examples, 33-97% yield). A β-hydride elimination-reductive elimination sequence from reaction with potassium isopropoxide base, yielding a potassium (FI)nickel(0)ate, was identified as a catalyst activation pathway that is responsible for halogen atom abstraction from the alkyl bromide. A combination of NMR and EPR spectroscopies identified (FI)nickel(II)-aryl complexes as the resting state during catalysis with no evidence for long-lived organic radical or odd-electron nickel intermediates. These data establish that the radical chain is short-lived and undergoes facile termination and also support a "recovering radical chain" process whereby the (FI)nickel(II)-aryl compound continually (re)initiates the radical chain. Kinetic studies established that the rate of C(sp2)-C(sp3) product formation was proportional to the concentration of the (FI)nickel(II)-aryl resting state that captures the alkyl radical for chain propagation. The proposed mechanism involves two key and concurrently operating catalytic cycles; the first involving a nickel(I/II/III) radical propagation cycle consisting of radical capture at (FI)nickel(II)-aryl, C(sp2)-C(sp3) reductive elimination, bromine atom abstraction from C(sp3)-Br, and transmetalation; and the second involving an off-cycle catalyst recovery process by slow (FI)nickel(II)-aryl → (FI)nickel(0)ate conversion for nickel(I) regeneration.

A Ni0(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) complex as a catalyst precursor for oligothiophene and polythiophene synthesis

Nickel-catalyzed syntheses of oligothiophene and polythiophene were carried out with Ni(cod)(dq) (COD: 1,5-cycloctadiene; DQ: duroquinone) as a catalyst precursor. Studies on the ligand exchange of Ni(cod)(dq) revealed that a high temperature was necessary to replace COD and DQ with PPh3 and N-heterocyclic carbene IPr. A coupling reaction of a metalated 3-hexylthiophene with 2-chloro-3-hexylthiophene employing Ni(cod)(dq) with IPr proceeded with a remarkably reduced amount of homocoupling byproduct. Polymerization of 2-chloro-3-hexylthiophene with Ni(cod)(dq)/DPPP also resulted in the reduction of the regioregularity defect.

The rigidity and chelation effect of ligands on the hydrogen evolution reaction catalyzed by Ni(II) complexes

With increasing interest in nickel-based electrocatalysts, three heteroleptic Ni(II) dithiolate complexes with the general formula [Ni(II)L(L')2] (1-3), L = 2-(methylene-1,1'-dithiolato)-5,5'-dimethylcyclohexane-1,3-dione and L' = triphenylphosphine (1), 1,1'-bis(diphenylphosphino)ferrocene (DPPF) (2), and 1,2-bis(diphenylphosphino)ethane (DPPE) (3), have been synthesized and characterized by various spectroscopic techniques (UV-vis, IR, 1H, and 31P{1H} NMR) as well as the electrochemical method. The molecular structure of complex 2 has also been determined by single-crystal X-ray crystallography. The crystal structure of complex 2 reveals a distorted square planar geometry around the nickel metal ion with a NiP2S2 core. The cyclic voltammograms reveal a small difference in the redox properties of complexes (ΔE° = 130 mV) while the difference in the catalytic half-wave potential becomes substantial (ΔEcat/2 = 670 mV) in the presence of 15 mM CF3COOH. The common S^S-dithiolate ligand provides stability, while the rigidity effect of other ligands (DPPE (3) > DPPF (2) > PPh3 (1)) regulates the formation of the transition state, resulting in the NiIII-H intermediate in the order of 1 > 2 > 3. The foot-of-the-wave analysis supports the widely accepted ECEC mechanism for Ni-based complexes with the first protonation step as a rate-determining step. The electrocatalytic proton reduction activity follows in the order of complex 1 > 2 > 3. The comparatively lower overpotential and higher turnover frequency of complex 1 are attributed to the flexibility of the PPh3 ligand, which favours the easy formation of a transition state.

Electroreductive Synthesis of Nickel(0) Complexes

Over the last fifty years, the use of nickel catalysts for facilitating organic transformations has skyrocketed. Nickel(0) sources act as useful precatalysts because they can enter a catalytic cycle through ligand exchange, without needing to undergo additional elementary steps. However, most Ni(0) precatalysts are synthesized with stoichiometric aluminum-hydride reductants, pyrophoric reagents that are not atom-economical and must be used at cryogenic temperatures. Here, we demonstrate that Ni(II) salts can be reduced on preparative scale using electrolysis to yield a variety of Ni(0) and Ni(II) complexes that are widely used as precatalysts in organic synthesis, including bis(1,5-cyclooctadiene)nickel(0) [Ni(COD)2 ]. This method overcomes the reproducibility issues of previously reported methods by standardizing the procedure, such that it can be performed anywhere in a robust manner. It can be transitioned to large scale through an electrochemical recirculating flow process and extended to an in situ reduction protocol to generate catalytic amounts of Ni(0) for organic transformations. We anticipate that this work will accelerate adoption of preparative electrochemistry for the synthesis of low-valent organometallic complexes in academia and industry.

Redox-Transmetalation Reactions: Easy Access to Homo- and Heterodimetallic d8,d10 Complexes

The ability of the imine PyCH═N-CH2Py (Py = 2-pyridyl, bpi) to behave as a heteroditopic ligand, which is suitable for creating two separate compartments to host metals in different oxidation states, has been developed by studying the reactions of the mixed-valence complexes [(cod)M-Ι(μ-bpi)MΙ(cod)] (M = Rh, Ir) with [M'(Cl)2(PPh3)2] (M' = Pd, Ni). The results depend on the molar ratio of the reagents used (1:1 or 1:2) to give the heterometallic complexes {d10-M',d8-M}-[(PPh3)(Cl)M'0(μ-bpi)MΙ(cod)] (Pd,Rh, 4; Pd,Ir, 5; Ni,Rh, 8; Ni,Ir, 9) and the two-electron mixed-valent compounds [(PPh3)(Cl)M'0(μ-bpi)M'ΙΙ(Cl)] (M' = Ni, 10; Pd, 11), respectively. A redox process occurs in the replacement of the low-valent [(cod)M-I] fragment, whereas the exchange of the [(cod)MI] fragment is redox-neutral. The metal with a d8 configuration in the products exhibits a square-planar geometry coordinated to two (Rh/Ir) or three (Ni/Pd) nitrogen atoms of the bridging bpi ligand. Conversely, the metal with a d10 configuration adopts trigonal-planar geometries, π-bonded to the imine C═N bond. The isolated complexes 4/5 and 10/11, along with the hypothetical heterometallic Pd,Ni compound (12), were studied by DFT methods. Additionally, the T-shaped moiety 'M'ΙΙ(PPh3)(Cl)(η1-CH-N(bpi))', stabilized by a secondary γ-agostic interaction, and the 'M'II(Cl)(κ3N-bpi)' fragment was found to be accessible redoxomers of complexes 10 and 11 by DFT calculations.

Nickel(II) and Palladium(II) Complexes with η5:κ1(N)-Coordinated Dicarbollide Ligands Containing Pendant Pyridine Group

A series of C- and B-substituted nido-carborane derivatives with a pendant pyridyl group was prepared. The synthesized compounds were used as ligands in the complexation reactions with bis(triphenylphosphine)nickel(II) and palladium(II) chlorides to give six new metallacomplexes with unusual η5:κ1(N)-coordination of the metal center. The single crystal structures of 1-(NC5H4-2'-S)-1,2-C2B10H11, 1-(NC5H4-2'-CH2S)-1,2-C2B10H11, Cs [7-(NC5H4-2'-CH2S)-7,8-C2B9H11] closo- and nido-carboranes and 3-Ph3P-3-(4(7)-NC5H4-2'-S)-closo-3,1,2-NiC2B9H10 and 3-Ph3P-3-(4(7)-NC5H4-2'-CH2S)-closo-3,1,2-NiC2B9H10 metallacarboranes were determined using single crystal X-ray diffraction.

Synthesis of Nickel(I)-Bromide Complexes via Oxidation and Ligand Displacement: Evaluation of Ligand Effects on Speciation and Reactivity

Nickel's +1 oxidation state has received much interest due to its varied and often enigmatic behavior in increasingly popular catalytic methods. In part, the lack of understanding about NiI results from common synthetic strategies limiting the breadth of complexes that are accessible for mechanistic study and catalyst design. We report an oxidative approach using tribromide salts that allows for the generation of a well-defined precursor, [NiI(COD)Br]2, as well as several new NiI complexes. Included among them are complexes bearing bulky monophosphines, for which structure-speciation relationships are established and catalytic reactivity in a Suzuki-Miyaura coupling (SMC) is investigated. Notably, these routes also allow for the synthesis of well-defined monomeric t-Bubpy-bound NiI complexes, which has not previously been achieved. These complexes, which react with aryl halides, can enable previously challenging mechanistic investigations and present new opportunities for catalysis and synthesis.

Comparison of Monophosphine and Bisphosphine Precatalysts for Ni-Catalyzed Suzuki-Miyaura Cross-Coupling: Understanding the Role of the Ligation State in Catalysis

Practical advances in Ni-catalyzed Suzuki-Miyaura cross-coupling (SMC) have been limited by a lack of mechanistic understanding of phosphine ligand effects. While bisphosphines are commonly used in these methodologies, we have observed instances where monophosphines can provide comparable or higher levels of reactivity. Seeking to understand the role of ligation state in catalysis, we performed a head-to-head comparison study of C(sp2)-C(sp2) Ni SMCs catalyzed by mono and bisphosphine precatalysts using six distinct substrate pairings. Significant variation in optimal precatalyst was observed, with the monophosphine precatalyst tending to outperform the bisphosphines with electronically deactivated and sterically hindered substrates. Mechanistic experiments revealed a role for monoligated (P1Ni) species in accelerating the fundamental organometallic steps of the catalytic cycle, while highlighting the need for bisligated (P2Ni) species to avoid off-cycle reactivity and catalyst poisoning by heterocyclic motifs. These findings provide guidelines for ligand selection against challenging substrates and future ligand design tailored to the mechanistic demands of Ni-catalyzed SMCs.

Half-Sandwich Nickelacarboranes Derived from [7-(MeO(CH2)2S)-7,8-C2B9H11]−

New carboranyl thioethers 1-MeO(CH2)nS-1,2-C2B10H11 (n = 2, 3) were prepared by the alkylation of the trimethylammonium salt of 1-mercapto-ortho-carborane with 1-bromo- 2-methoxyethane and 1-bromo-3-methoxypropane, respectively. Their deboronation with cesium fluoride in ethanol gave the corresponding nido-carboranes Cs[7-MeO(CH2)nS-7,8-C2B9H11] (n = 2, 3). The reactions of Cs[7-MeO(CH2)2S-7,8-C2B9H11] with various nickel(II) phosphine complexes [(dppe)NiCl2] and [(R’R2P)2NiCl2] (R = R’ = Ph, Bu; R = Me, R’ = Ph; R = Ph, R’ = Me, Et) were studied and a series of nickelacarboranes 3,3-dppe-1-MeO(CH2)2S-closo-3,1,2-NiC2B9H10 and 3,3- (R’R2P)2-1-MeO(CH2)2S-closo-3,1,2-NiC2B9H10 (R = R’ = Bu; R = Me, R’ = Ph; R = Ph, R’ = Me, Et) was prepared. The molecular crystal structure of 3,3-dppe-1-MeO(CH2)2S-closo-3,1,2-NiC2B9H10 was determined by single-crystal X-ray diffraction.

Nickel Catalyzed Cross-Coupling of Aryl and Alkenyl Triflates with Alkyl Thiols

We report a nickel catalyzed C-S cross-coupling of aryl and alkenyl triflates with alkyl thiols. A variety of the corresponding thioethers were synthesized using an air-stable nickel precatalyst under mild reaction conditions with short reaction times. A broad substrate scope, including pharmaceutically relevant compounds, could be demonstrated.

Reactivity of NiII, PdII and PtII complexes bearing phosphine ligands towards ZnII displacement and hydrolysis in Cis2His2 and Cis3His zinc-fingers domains

A systematic study of the effect of phosphine and bis-phosphine ligands in the interaction of Ni^II, Pd^II, and Pt^II complexes with two classes of zinc fingers was performed. The Cys₂His₂, finger 3 of specific protein-1, and the Cys₂HisCys C-terminal zinc finger of nucleocapsid protein 7 of the HIV-1 were used as models of the respective class. In general, phosphine ligands favor the metal binding to the peptide, although the bis-phosphine ligands produce more specific binding than the monodentate. In the case of nickel complexes, the interaction of Ni^II ions with the sequence SKH, present in Cys₂His₂, results in hydrolysis, contrasting to the preferred zinc ejection produced by the Ni^II complexes with chelating phosphines, producing Ni(bis-phosphine) fingers. In the absence of the SKH sequence, zinc ejection is observed with the formation of nickel fingers, with reactivity dependent on the phosphine. On the other hand, Pd(phosphines) produces Pd₂ fingers in the case of triphenylphosphine with the phosphine coordinated as intermediate species. The bis-phosphine ligands produce very clean spectra and a stable signal Pd(bis-phosphine)finger. Interestingly, phosphines produce very reactive platinum complexes, which eject zinc and promote peptide hydrolysis. The results reported here are relevant to the understanding of the mechanism of these interactions and how to modulate metallocompounds for zinc finger interference.

Heteropolymetallic [FeFe]-Hydrogenase Mimics: Synthesis and Electrochemical Properties

The synthesis and electrochemical properties of tetranuclear [Fe2S2]-hydrogenase mimic species containing Pt(II), Ni(II), and Ru(II) complexes have been studied. To this end, a new tetranuclear [Fe2S2] complex containing a 5,5'-diisocyanide-2,2'-bipyridine bridging ligand has been designed and coordinated to the metal complexes through the bipyridine moiety. Thus, the tetranuclear [Fe2S2] complex (6) coordinates to Pt(II), Ni(II) and Ru(II) yielding the corresponding metal complexes. The new metal center in the bipyridine linker modulates the electronic communication between the redox-active [Fe2S2] units. Thus, electrochemical studies and DFT calculations have shown that the presence of metal complexes in the structure strongly affect the electronic communication between the [Fe2S2] centers. In the case of diphosphine platinum compounds 10, the structure of the phosphine ligand plays a crucial role to facilitate or to hinder the electronic communication between [Fe2S2] moieties. Compound 10a, bearing a dppe ligand, shows weak electronic communication (ΔE = 170 mV), whereas the interaction is much weaker in the Pt-dppp derivative 10b (ΔE = 80 mV) and virtually negligible in the Pt-dppf complex 10c. The electronic communication is facilitated by incorporation of a Ru-bis(bipyridine) complex, as observed in the BF4 salt 12 (ΔE = 210 mV) although the reduction of the [FeFe] centers occurs at more negative potentials. Overall, the experimental-computational procedure used in this work allows us to study the electronic interaction between the redox-active centers, which, in turn, can be modulated by a transition metal.

Two-Electron Mixed Valency in a Heterotrimetallic Nickel-Vanadium-Nickel Complex

Mixed-valence complexes represent an enticing class of coordination compounds to interrogate electron transfer confined within a molecular framework. The diamagnetic heterotrimetallic anion, [V(SNS)₂{Ni(dppe)}₂]^-, was prepared by reducing (dppe)NiCl₂ in the presence of the chelating metalloligand [V(SNS)₂]^- [dppe = bis(diphenylphosphino)ethane; (SNS)^3- = bis(2-thiolato-4-methylphenyl)amide]. Vanadium-nickel bonds span the heterotrimetallic core in the structure of [V(SNS)₂{Ni(dppe)}₂]^-, with V-Ni bond lengths of 2.78 and 2.79 Å. One-electron oxidation of monoanionic [V(SNS)₂{Ni(dppe)}₂]^- yielded neutral, paramagnetic V(SNS)₂{Ni(dppe)}₂. The solid-state structure of V(SNS)₂{Ni(dppe)}₂ revealed that the two nickel ions occupy unique coordination environments: one nickel is in a square-planar S₂P₂ coordination environment (τ₄ = 0.19), with a long Ni···V distance of 3.45 Å; the other nickel is in a tetrahedral S₂P₂ coordination environment (τ₄ = 0.84) with a short Ni-V distance of 2.60 Å, consistent with a formal metal-metal bond. Continuous-wave X-band electron paramagnetic resonance spectroscopy, electrochemical investigations, and density functional theory computations indicated that the unpaired electron in the neutral V(SNS)₂{Ni(dppe)}₂ cluster is localized on the bridging [V(SNS)₂] metalloligand, and as a result, V(SNS)₂{Ni(dppe)}₂ is best described as a two-electron mixed-valence complex. These results demonstrate the important role that metal-metal interactions and flexible coordination geometries play in enabling multiple, reversible electron transfer processes in small cluster complexes.

Nickel-Catalyzed Suzuki Coupling of Phenols Enabled by SuFEx of Tosyl Fluoride

A practical and efficient Suzuki coupling of phenols has been developed by using trans-NiCl(o-Tol)(PCy₃)₂/2PCy₃ as a catalyst in the presence of tosyl fluoride as an activator. The key for the direct use of phenols lies in the compatibility of the nickel catalyst with tosyl fluoride (TsF) and its sulfur(VI) fluoride exchange (SuFEx) with C_Ar-OH. Water has been found to improve the one-pot process remarkably. The steric and electronic effects and the functional group compatibility of the one-pot Suzuki coupling of phenols appear to be comparable to the conventional one of pre-prepared aryl tosylates. A series of electronically and sterically various biaryls could be obtained in good to excellent yields by using 3-10 mol% loading of the nickel catalyst. The applications of this one-pot procedure in chemoselective derivatization of complex molecules have been demonstrated in 3-phenylation of estradiol and estrone.

Enabling Suzuki-Miyaura coupling of Lewis-basic arylboronic esters with a nonprecious metal catalyst

The high cost and negative environmental impact of precious metal catalysts has led to increased demand for nonprecious alternatives for widely practiced reactions such as the Suzuki-Miyaura coupling (SMC). Ni-catalyzed versions of this reaction have failed to achieve high reactivity with Lewis-basic arylboron nucleophiles, especially pinacolboron esters. We describe the development of (PPh2Me)2NiCl2 as an inexpensive and air-stable precatalyst that addresses this challenge. Under activation by n-BuMgCl, this complex can catalyze the coupling of synthetically important heteroaryl pinacolborons with heteroaryl halides. Mildly basic conditions (aqueous K3PO4) allow the reaction to tolerate sensitive functional groups that were incompatible with other Ni-SMC methods. Experimental and computational studies suggest that catalyst inhibition by substitution of PPh2Me from Ni(ii) intermediates by Lewis basic reactants and products is disfavored relative to more commonly employed ligands in the Ni-SMC, which allows it to operate efficiently in the presence of Lewis bases such as unhindered pyridines.

Structure-Reactivity Relationships of Buchwald-Type Phosphines in Nickel-Catalyzed Cross-Couplings

The dialkyl-ortho-biaryl class of phosphines, commonly known as Buchwald-type ligands, are among the most important phosphines in Pd-catalyzed cross-coupling. These ligands have also been successfully applied to several synthetically valuable Ni-catalyzed cross-coupling methodologies and, as demonstrated in this work, are top performing ligands in Ni-catalyzed Suzuki Miyaura Coupling (SMC) and C-N coupling reactions, even outperforming commonly employed bisphosphines like dppf in many circumstances. However, little is known about their structure-reactivity relationships (SRRs) with Ni, and limited examples of well-defined, catalytically relevant Ni complexes with Buchwald-type ligands exist. In this work, we report the analysis of Buchwald-type phosphine SRRs in four representative Ni-catalyzed cross-coupling reactions. Our study was guided by data-driven classification analysis, which together with mechanistic organometallic studies of structurally characterized Ni(0), Ni(I), and Ni(II) complexes allowed us to rationalize reactivity patterns in catalysis. Overall, we expect that this study will serve as a platform for further exploration of this ligand class in organonickel chemistry as well as in the development of new Ni-catalyzed cross-coupling methodologies.

Group 16 conjugated polymers based on furan, thiophene, selenophene, and tellurophene

Five-membered aromatic rings containing Group 16 elements (O, S, Se, and Te), also referred as chalcogenophenes, are ubiquitous building blocks for π-conjugated polymers (CPs). Among these, polythiophenes have been established as a model system to study the interplay between molecular structure, solid-state organization, and electronic performance. The judicious substitution of alternative heteroatoms into polythiophenes is a promising strategy for tuning their properties and improving the performance of derived organic electronic devices, thus leading to the recent abundance of CPs containing furan, selenophene, and tellurophene. In this review, we first discuss the current status of Kumada, Negishi, Murahashi, Suzuki-Miyaura, and direct arylation polymerizations, representing the best routes to access well-defined chalcogenophene-containing homopolymers and copolymers. The self-assembly, optical, solid-state, and electronic properties of these polymers and their influence on device performance are then summarized. In addition, we highlight post-polymerization modifications as effective methods to transform polychalcogenophene backbones or side chains in ways that are unobtainable by direct polymerization. Finally, the major challenges and future outlook in this field are presented.

Nickel-Catalyzed C-N Cross-Coupling of 4-Chloro-1,8-naphthalimides and Bulky, Primary Alkylamines at Room Temperature

4-Amino-1,8-naphthalimides, potentially useful fluorescent probes in biological applications, are prepared via Ni(cod)₂/IPr-catalyzed cross-couplings between 4-chloro-1,8-naphthalimide electrophiles and α,α,α-trisubstituted, primary alkylamines at room temperature. This method represents the first synthesis of 4-amino-1,8-naphthalimides using Ni-catalyzed C-N cross-coupling and provides the first examples of 4-amino-1,8-naphthalimides incorporating such bulky primary alkylamines, thereby highlighting the utility of Ni-catalyzed processes in synthesizing naphthalimide scaffolds that were inaccessible using established methods (S_NAr; Pd or Cu catalysis).

Nickel-Catalyzed Reductive Cross-Coupling of Aryl Bromides with Vinyl Acetate in Dimethyl Isosorbide as a Sustainable Solvent

A nickel-catalyzed reductive cross-coupling has been achieved using (hetero)aryl bromides and vinyl acetate as the coupling partners. This mild, applicable method provides a reliable access to a variety of vinyl arenes, heteroarenes, and benzoheterocycles, which should expand the chemical space of precursors to fine chemicals and polymers. Importantly, a sustainable solvent, dimethyl isosorbide, is used, making this protocol more attractive from the point of view of green chemistry.

Recent Developments and Aspects of Industrial Fluoroalkylation

Fluoroalkylations have received increasing attention in the academic and industrial environment due to the particular properties of the active ingredients that are strongly influenced by fluoroalkyl substituents. The inherent difficulties of introducing a fluoroalkyl substituent into advanced intermediates has triggered the development of an enormous number of specialized reagents, which, however, are often not suitable for large scale applications. In contrast to this reagent based fluoroalkylation approach, the direct activation of industrially readily available fluoroalkyl halides could be more suitable for a large-scale process. In this way the dithionite initiated fluoroalkylation as well as newly developed catalytically activated fluoroalkylation protocols were considered for industrial large-scale applications.

Inhibition of (dppf)nickel-catalysed Suzuki-Miyaura cross-coupling reactions by α-halo-N-heterocycles

A nickel/dppf catalyst system was found to successfully achieve the Suzuki-Miyaura cross-coupling reactions of 3- and 4-chloropyridine and of 6-chloroquinoline but not of 2-chloropyridine or of other α-halo-N-heterocycles. Further investigations revealed that chloropyridines undergo rapid oxidative addition to [Ni(COD)(dppf)] but that α-halo-N-heterocycles lead to the formation of stable dimeric nickel species that are catalytically inactive in Suzuki-Miyaura cross-coupling reactions. However, the corresponding Kumada-Tamao-Corriu reactions all proceed readily, which is attributed to more rapid transmetalation of Grignard reagents.

Univariate classification of phosphine ligation state and reactivity in cross-coupling catalysis

[Figure: see text].

Nickel-Catalyzed Kumada Cross-Coupling Reactions of Benzylic Sulfonamides

Herein, we report a Kumada cross-coupling reaction of benzylic sulfonamides. The scope of the transformation includes acyclic and cyclic sulfonamide precursors that cleanly produce highly substituted acyclic fragments. Preliminary data are consistent with a stereospecific mechanism that allows for a diastereoselective reaction.

Nickelocene as an Air- and Moisture-Tolerant Precatalyst in the Regioselective Synthesis of Multisubstituted Pyridines

Ni(COD)₂-catalyzed cycloaddition reactions to access pyridines have been extensively studied. However, this catalyst typically requires drying procedures and inert-atmosphere techniques for the reactions. Herein, we report operationally simple nickel(0) catalysis to access substituted pyridines from various nitriles and 1,6-diynes without the aid of air-free techniques. The Ni-Xantphos-based catalytic manifold is tolerant to air, moisture, and heat while promoting the [2 + 2 + 2] cycloaddition reactions with high reaction yields and broad substrate scope. In addition, we disclose that not only the steric effect but also the frontier molecular orbital interactions can play a critical role in determining the regiochemical outcome of nickel-catalyzed [2 + 2 + 2] cycloaddition for the synthesis of substituted pyridines.

Synthesis and crystal structures of nickel(ii) and palladium(ii) complexes with o-carboranyl amidine ligands

A number of new nido-carboranyl amidines 10-R(CH₂)_nNHC(Et)[double bond, length as m-dash]HN-7,8-C₂B₉H₁₁ (n = 2, R = OH, OMe, and NMe₂; n = 3, R = OH) were synthesized by the nucleophilic addition of amino alcohols and N,N-dimethylethylenediamine to the highly activated -C[triple bond, length as m-dash]N⁺- triple bond of the 10-propionitrilium derivative of nido-carborane. A similar reaction of 10-EtC[triple bond, length as m-dash]N-7,8-C₂B₉H₁₁ with ethylenediamine unexpectedly resulted in the cleavage of the C[triple bond, length as m-dash]N bond to form the ammonium derivative 10-H₃N-7,8-C₂B₉H₁₁. The complexation of the synthesized carboranyl amidines 10-MeO(CH₂)₂NHC(Et)[double bond, length as m-dash]HN-7,8-C₂B₉H₁₁ and 10-Me₂N(CH₂)₂NHC(Et)[double bond, length as m-dash]HN-7,8-C₂B₉H₁₁ with nickel and palladium phosphine complexes [(Ph₃P)₂MCl₂] (M = Ni, Pd) was studied. The reactions with 10-MeO(CH₂)₂NHC(Et)[double bond, length as m-dash]HN-7,8-C₂B₉H₁₁ result in half-sandwiched metallacarborane complexes with the retention of one triphenylphosphine ligand [3-Ph₃P-3-(8-MeOCH₂CH₂N[double bond, length as m-dash]C(Et)NH)-3,1,2-MC₂B₉H₁₀], while the reactions with 10-Me₂N(CH₂)₂NHC(Et)[double bond, length as m-dash]HN-7,8-C₂B₉H₁₁ proceed with the complete loss of the phosphine ligands and lead to the formation of complexes with the η⁵:κ²(N,N')-coordinated carboranyl amidine ligand [3,3-(8-Me₂NCH₂CH₂N[double bond, length as m-dash]C(Et)NH)-3,1,2-MC₂B₉H₁₀]. The crystal molecular structures of the synthesized complexes were determined by single crystal X-ray diffraction.

Tellura(benzo)bithiophenes: Synthesis, Oligomerization, and Phosphorescence

A series of planar π-extended Te-containing heteroacenes, termed tellura(benzo)bithiophenes, were synthesized. This new structural class of heterocycle features a tellurophene ring fused to a benzobithiophene unit with aromatic side groups (either -C₆H₄ⁱPr or -C₆H₄OCH₃) positioned at the 2- and 5-positions of the tellurophene moiety. Although attempts to enhance molecular rigidity and extend ring-framework π-delocalization in a cumenyl (-C₆H₄ⁱPr)-capped tellura(benzo)bithiophene led to oxidation (and Te-C bond scission) to form a diene-one, the formation of an oligomeric tellura(benzo)bithiophene was possible via Kumada catalyst-transfer polycondensation (KCTP). Furthermore, one tellura(benzo)bithiophene derivative exhibits orange-red phosphorescence at room temperature in air when incorporated into a poly(methyl methacrylate) host; accompanying TD-DFT computations provided insight into a potential mechanism for the observed phosphorescence.

Nickel-Catalyzed Cross-Coupling of Aryl 2-Pyridyl Ethers with Organozinc Reagents: Removal of the Directing Group via Cleavage of the Carbon-Oxygen Bonds

Reaction of aryl 2-pyridyl ethers with arylzinc reagents under catalysis of NiCl₂(PCy₃)₂ affords aryl-aryl cross-coupling products via selective cleavage of C_Ar-OPy bonds. The reaction features a wide substrate range and good compatibility of functional groups. β-H-free alkylzinc reagents are also applicable as the nucleophiles in the transformation, whereas β-H-containing alkylzinc reagents lead to a mixture of cross-coupling and hydrogenation products.

Ranking Ligands by Their Ability to Ease (C6F5)2NiIIL → Ni0L + (C6F5)2 Coupling versus Hydrolysis: Outstanding Activity of PEWO Ligands

The Ni^II literature complex cis-[Ni(C₆F₅)₂(THF)₂] is a synthon of cis-Ni(C₆F₅)₂ that allows us to establish a protocol to measure and compare the ligand effect on the Ni^II → Ni⁰ reductive elimination step (coupling), often critical in catalytic processes. Several ligands of different types were submitted to this Ni-meter comparison: bipyridines, chelating diphosphines, monodentate phosphines, PR₂(biaryl) phosphines, and PEWO ligands (phosphines with one potentially chelate electron-withdrawing olefin). Extremely different C₆F₅-C₆F₅ coupling rates, ranging from totally inactive (producing stable complexes at room temperature) to those inducing almost instantaneous coupling at 25 °C, were found for the different ligands tested. The PR₂(biaryl) ligands, very efficient for coupling in Pd, are slow and inefficient in Ni, and the reason for this difference is examined. In contrast, PEWO type ligands are amazingly efficient and provide the lowest coupling barriers ever observed for Ni^II complexes; they yield up to 96% C₆F₅-C₆F₅ coupling in 5 min at 25 °C (the rest is C₆F₅H) and 100% coupling with no hydrolysis in 8 h at -22 to -53 °C.

Selective nickel-catalyzed fluoroalkylations of olefins

Mild and selective nickel-catalyzed trifluoromethylation and perfluoroalkylation reactions of alkenes were developed to provide fluorinated olefins, including natural products, pharmaceuticals, and variety of synthetic building blocks in good to excellent yields (38 examples). Control experiments, kinetic measurements and in situ EPR studies reveal the importance of radical species and the formation of 1,2-adducts as intermediates.