Synthesis, Structural, and Photophysical Studies of Phenylquinoline and Phenylquinolinyl Alkynyl Based Pt(II) Complexes

N,C,N-Pincers in Platinum Bimetallic Complexes: Influence of the Pincer and Bridging Ligands on the Metal-Metal Bond and the Photophysical Properties

Precursors PtCl{κ3-N,C,N-[py-C6HMe2-py]} (1), PtCl{κ3-N,C,N-[py-O-C6H3-O-py]} (2), Pt(OH){κ3-N,C,N-[py-C6HMe2-py]} (3), and Pt(OH){κ3-N,C,N-[py-O-C6H3-O-py]} (4) were used to prepare d8-platinum bimetallic complexes. Precursors 1 and 2 react with AgBF4 and 7-azaindole (Haz) to give [Pt{κ3-N,C,N-[py-C6HMe2-py]}{κ1-N-[Haz]}]BF4 (5) and [Pt{κ3-N,C,N-[py-O-C6H3-O-py]}{κ1-N-[Haz]}]BF4 (6) and 3 and 4 with indolo[2,3-b]indole (H2ii) to generate Pt{κ1-N-[Hii]}{κ3-N,C,N-[py-C6HMe2-py]} (7) and Pt{κ1-N-[Hii]}{κ3-N,C,N-[py-O-C6H3-O-py]} (8). Subsequent addition of 3 and 4 to 5-7 affords bimetallic derivatives [{Pt[κ3-N,C,N-(py-C6HMe2-py)]}2{μ-N,N-[az]}]BF4 (9), [{Pt[κ3-N,C,N-(py-O-C6H3-O-py)]}2{μ-N,N-[az]}]BF4 (10), and {Pt[κ3-N,C,N-(py-C6HMe2-py)]}2{μ-N,N-[ii]} (11). X-ray structures of 9-11 reveal separations between the metals in sequence 9 (3.0515(4) Å) < 10 (3.2689(9) Å) < 11 (3.2949(2) Å). DFT calculations support σ overlap of the dz2 orbitals of platinum atoms, for 9 and 10. Accordingly, their absorption spectra show a MMLCT transition. Complex 9 is a red emitter. The excited state has 3MMLCT characteristics and a Pt-Pt separation of 2.763 Å. Complex 11 is a dual emitter in the red and NIR regions, in solid. Both excited states have a 3LC/LMCT characteristic and platinum-platinum separations of 3.290 and 3.202 Å. Intermediate 5 is a green emitter that achieves quantum yields close to unity, when diluted in PMMA and 1,2-dichloroethane at low concentrations.

Recent Progress in Near-Infrared Organic Electroluminescent Materials

Near-infrared (NIR) refers to the section of the spectrum from 650 to 2500 nm. NIR luminescent materials are widely employed in organic light-emitting diodes (OLEDs), fiber optic communication, sensing, biological detection, and medical imaging. This paper reviews organic NIR electroluminescent materials, including organic NIR electrofluorescent materials and organic NIR electrophosphorescent materials that have been investigated in the past 6 years. Small-molecule, polymer NIR fluorescent materials and platinum(II) and iridium(III) complex NIR phosphorescent materials are described, and the limitations of the development of NIR luminescent materials and future prospects are discussed.

Double addition of phenylacetylene onto the mixed bridge phosphinito-phosphanido Pt(i) complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt)

The reaction of the dinuclear phosphinito bridged complex [(PHCy2)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (1) with phenylacetylene affords the η1-alkenyl-μ,η1:η2-alkynyl complex [(η1-trans-(Ph)HC[double bond, length as m-dash]CH)(PHCy2)Pt(μ-PCy2)(μ,η1:η2-PhC[triple bond, length as m-dash]C)Pt{κP-P(O)Cy2}(PHCy2)] (4) displaying a σ-bonded 2-phenylethenyl ligand and an alkynyl (μ-κCα:η2) bridge between the platinum atoms. Complex 4 was shown to form in two steps: initially, the attack of the first molecule of phenylacetylene gives the σ-acetylide complex [(PHCy2)(η1-PhC[triple bond, length as m-dash]C)Pt1(μ-PCy2)Pt2(PHCy2){κP-P(OH)Cy2}](Pt-Pt) (5) featuring an intramolecular π-type hydrogen bond between the POH and the C[triple bond, length as m-dash]C triple bond; fast reaction of 5 with a second molecule of phenylacetylene results in the oxidative addition of the terminal C-H bond of the second alkyne to Pt1 that, after rearrangements, leads to 4. When left in solution for two weeks, complex 4 spontaneously isomerizes completely to [(PHCy2)(η1-trans-(Ph)HC[double bond, length as m-dash]CH)Pt(μ-PCy2){κ2P,O-μ-P(O)Cy2}Pt(η1-PhC[triple bond, length as m-dash]C)(PHCy2)] (7) displaying a 2-phenylethenyl ligand and a phenylethynyl group both σ-bonded to the metal. Density functional calculations at the B3LYP/LACV3P++**//DFT/LACVP* level were carried out to study the thermodynamics of the formation of all considered complexes and to trace the mechanism of formation of the observed products.

Rise of Conjugated Poly-ynes and Poly(Metalla-ynes): From Design Through Synthesis to Structure-Property Relationships and Applications

Conjugated poly-ynes and poly(metalla-ynes) constitute an important class of new materials with potential application in various domains of science. The key factors responsible for the diverse usage of these materials is their intriguing and tunable chemical and photophysical properties. This review highlights fascinating advances made in the field of conjugated organic poly-ynes and poly(metalla-ynes) incorporating group 4-11 metals. This includes several important aspects of conjugated poly-ynes viz. synthetic protocols, bonding, electronic structure, nature of luminescence, structure-property relationships, diverse applications, and concluding remarks. Furthermore, we delineated the future directions and challenges in this particular area of research.

4,5-Substituted C^C* cyclometalated thiazol-2-ylidene platinum(ii) complexes - synthesis and photophysical properties

We report the synthesis of seven novel backbone functionalized N-phenyl-1,3-thiazol-2-ylidene platinum(ii) complexes and their photophysical properties. Electronically diverse N-phenyl-1,3-thiazol-2-thiones were prepared by a reaction of aniline with carbon disulfide and different α-haloketone compounds. Oxidative desulfuration and salt metathesis yielded the desired NHC-precursors with hexafluorophosphate counterions. In addition, a new route for the synthesis of N-phenyl-1,3-benzo[d]thiazole tetrafluoroborate via N-arylation using hypervalent iodine species is presented. All complexes were prepared from the corresponding NHC precursor in a one-pot process using silver(i)oxide, transmetalation to platinum and reaction with the β-diketone acetylacetone under basic conditions. These complexes exhibit strong phosphorescence with quantum yields up to 72% in 2 wt% PMMA films with decay lifetimes of 8.8-12.3 μs. The influence of methyl- and phenyl-groups, and an ester-substituent at the 4- and/or 5-position of the 1,3-thiazole moiety, as well as the N-phenyl-1,3-benzo[d]thiazole-derived motif is discussed. The 4,5-unsubstituted-N-phenyl-1,3-thiazol-2-ylidene platinum(ii) acetylacetonato complex served as a reference in this study to evaluate the electronic effects originating from the backbone substitution. All complexes emit in a narrow range of the bluish-green spectrum of the visible light (510 ± 10 nm).

A new approach to the effects of isocyanide (CN-R) ligands on the luminescence properties of cycloplatinated(ii) complexes

Cycloplatinated complexes bearing isocyanides were prepared and characterized. The complexes exhibited strong luminescence while the nature of R substituents in isocyanides affected the luminescence characteristics.

Changing the Emission Properties of Phosphorescent C^C*-Cyclometalated Thiazol-2-ylidene Platinum(II) Complexes by Variation of the β-Diketonate Ligands

Cyclometalated thiazol-2-ylidene platinum(II) complexes based on the N-phenyl-4,5-dimethyl-1,3-thiazol-2-ylidene N-heterocyclic carbene (NHC) ligand and seven different β-diketonate ligands have been synthesised and investigated for their structural and photophysical properties. The complexes were synthesised in a one-pot procedure starting with the in situ formation of the corresponding silver(I) carbene and transmetalation to platinum, followed by the reaction with the respective β-diketonate under basic conditions. All the compounds were fully characterised by standard techniques, including ¹⁹⁵ Pt NMR spectroscopy. Three solid-state structures revealed quite different aggregation behaviour depending on the β-diketonate architecture. The reported complexes showed strong phosphorescence at room temperature in amorphous poly(methyl methacrylate) films. The emission wavelengths (ca. 510 nm) were found to be independent of the β-diketonate ligand, but the electronically diverse β-diketonates strongly influence the observed quantum yields (QY) and decay lifetimes. The results of theoretical studies employing density functional theory (DFT) methods support the conclusion of a metal-to-ligand charge transfer (³ MLCT) as the main emission process, in accordance with the reported photophysical properties. Standard organic light-emitting diodes (OLEDs) prepared with unoptimised matrix materials using one of the complexes showed values of 12.3 % external quantum yield, 24.0 lm W^-1 luminous efficacy and 37.8 cd A^-1 current efficiency at 300 cd m^-2 .

Uncovering Intramolecular π-Type Hydrogen Bonds in Solution by NMR Spectroscopy and DFT Calculations

Reaction between the phosphinito bridged diplatinum species [(PHCy2 )Pt(μ-PCy2 ){κ(2) P,O-μ-P(O)Cy2 }Pt(PHCy2 )](Pt-Pt) (1), and (trimethylsilyl)acetylene at 273 K affords the σ-acetylide complex [(PHCy2 )(η(1) -Me3 SiC≡C)Pt(μ-PCy2 )Pt(PHCy2 ){κP-P(OH)Cy2 }](Pt-Pt) (2) featuring an intramolecular π-type hydrogen bond. Scalar and dipolar couplings involving the POH proton were detected by 2D NMR experiments. Relativistic DFT calculations of the geometry, relative energy, and NMR properties of model systems of 2 confirmed the structural assignment and allowed the energy of the π-type hydrogen bond to be estimated (ca. 22 kJ mol(-1) ).

Luminescent pentafluorophenyl-cycloplatinated complexes: synthesis, characterization, photophysics, cytotoxicity and cellular imaging

Pentafluorophenyl cycloplatinated complexes have been synthesized and their photophysical properties studied and investigated by DFT, TD-DFT calculations. The cellular localization and the cytotoxicity of [Pt(C^N)(C₆F₅)(DMSO)] complexes towards two different cell lines has been assessed.