Selective Ethylene Oligomerization with Chromium Complexes Bearing Pyridine–Phosphine Ligands: Influence of Ligand Structure on Catalytic Behavior

DFT-Enabled Development of Hemilabile (P∧N) Ligands for Gold(I/III) RedOx Catalysis: Application to the Thiotosylation of Aryl Iodides

Ligand-enabled oxidative addition of Csp2-X bonds to Au(I) centers has recently appeared as a valuable strategy for the development of catalytic RedOx processes. Several cross-coupling reactions that were previously considered difficult to achieve were reported lately, thus expanding the synthetic potential of gold(I) complexes beyond the traditional nucleophilic functionalization of π-systems. MeDalPhos has played an important role in this development and, despite several studies on alternative structures, remains, so far, the only general ligand for such process. We report herein the discovery and DFT-enabled structural optimization of a new family of hemilabile (P∧N) ligands that can promote the oxidative addition of aryl iodides to gold(I). These flexible ligands, which possess a common 2-methylamino heteroaromatic N-donor motif, are structurally and electronically tunable, beyond being easily accessible and affordable. The corresponding Au(I) complexes were shown to outperform the reactivity of (MeDalPhos)Au(I) in a series of alkoxy- and amidoarylations of alkenes. Their synthetic potential and comparatively higher reactivity were further highlighted in the thiotosylation of aryl iodides, a challenging unreported C-S cross-coupling reaction that could not be achieved under classical Pd(0/II) catalysis and that allows for general and divergent access to aryl sulfur derivatives.

Chromium Ethylene Tri-/Tetramerization Catalysts Supported by Iminophosphine Ligands

A new class of highly active ethylene tri-/tetramerization chromium catalysts supported by iminophosphine ligands has been studied. The impact of electronic and steric changes of these ligands on selectivity and activity has been investigated by varying P- and/or N-substituents. Upon activation with MMAO, the ligand bearing a P-cyclohexyl group displayed a high activity of 307 kg/(g Cr/h) with a high trimerization selectivity of 92.6%. Decreasing the steric hindrance of N-aryl group led to a decrease in 1-hexene selectivity (74.5%), producing more 1-octene (10.3%). X-ray diffraction analysis verifies that the ligands coordinate with the chromium center in a κ2-P,N mode.

Chromium-Based Complexes Bearing Aminophosphine and Phosphine-Imine-Pyrryl Ligands for Selective Ethylene Tri/Tetramerization

A series of Cr-based complexes 6-10 bearing aminophosphine (P,N) ligands Ph₂P-L-NH₂ [L = CH₂CH₂ (1), L = CH₂CH₂CH₂ (2), and L = C₆H₄CH₂ (3)] and phosphine-imine-pyrryl (P,N,N) ligands 2-(Ph₂P-L-N=CH)C₄H₃NH [L = CH₂CH₂CH₂ (4) and L = C₆H₄CH₂ (5)] were prepared, and their catalytic properties were examined for ethylene tri/tetramerization. X-ray crystallographic analysis of complex 8 indicated the κ²-P,N bidentate coordination mode at the Cr(III) center and the distorted octahedral geometry of monomeric P,N-CrCl₃. Upon activation by methylaluminoxane (MAO), complexes 7-8 bearing P,N (PC₃N backbone) ligands 2-3 showed good catalytic reactivity for ethylene tri/tetramerization. On the other hand, complex 6 bearing the P,N (PC₂N backbone) ligand 1 was found active for non-selective ethylene oligomerization, while complexes 9-10 bearing P,N,N ligands 4-5 only produced polymerization products. In particular, the high catalytic activity of 458.2 kg/(g·Cr·h), excellent selectivity of 90.9% (1-hexene and 1-octene combined), and extremely low PE content of 0.1% were obtained with complex 7 in toluene at 45 °C and 45 bar. These results suggest that rational control of P,N and P,N,N ligand backbones, including a carbon spacer and rigidity of a carbon bridge, can lead to the high-performance catalyst for the ethylene tri/tetramerization process.

Ethylene (co) oligomerization using iminopyridyl Ni(II) and Pd(II) complexes bearing benzocycloalkyl moieties to access hyperbranched ethylene oligomers and ethylene-MA co-oligomers

Hyperbranched ethylene oligomers and polar functionalized co-oligomers synthesized via ethylene chain walking (co) oligomerization is a very attractive strategy. In this study, a series of dibenzhydryl iminopyridyl ligands with benzocycloalkyl and naphthyl moieties and the corresponding Ni(II) and Pd(II) complexes were synthesized and characterized. The Ni(II) complexes were highly effective in ethylene oligomerization and ethylene oligomers with hyperbranched microstructures were generated from this system. The corresponding Pd(II) complexes showed moderate oligomerization activities in ethylene oligomerization and hyperbranched ethylene oligomers were also yielded from the system. More significantly, the Pd(II) complexes can also effectively promote the co-oligomerization of ethylene with methyl acrylate (MA) to obtain hyperbranched polar functionalized ethylene-MA co-oligomers. The reaction temperature, catalyst ligand structure and metal type all have significant effects on ethylene (co) oligomerization with respect to catalytic activity, molecular weight and topology of the oligomers.

Electron-Deficient Acetylenes as Three-Modal Adjuvants in SNH Reaction of Pyridinoids with Phosphorus Nucleophiles

Publications covering a new easy metal-free functionalization of pyridinoids (pyridines, quinolines, isoquinolines, acridine) under the action of the system of electron-deficient acetylenes (acetylenecarboxylic acid esters, acylacetylenes)/P-nucleophiles (phosphine chalcogenides, H-phosphonates) are reviewed. Special attention is focused on a S_N^H reaction of the regioselective cross-coupling of pyridines with secondary phosphine chalcogenides triggered by acylacetylenes to give 4-chalcogenophosphorylpyridines. In these processes, acetylenes act as three-modal adjuvants (i) activating the pyridine ring towards P-nucleophiles, (ii) deprotonating the P-H bond and (iii) facilitating the nucleophilic addition of the P-centered anion to a heterocyclic moiety followed by the release of the selectively reduced acetylenes (E-alkenes).

Proton-detected fast-magic-angle spinning NMR of paramagnetic inorganic solids

Fast (60 kHz) magic angle spinning solid-state NMR allows very sensitive proton detection in highly paramagnetic organometallic powders. We showcase this technique with the complete assignment of ¹H and ¹³C resonances in a high-spin Fe(ii) polymerisation catalyst with less than 2 mg of sample at natural abundance.

Metal-free SHN cross-coupling of pyridines with phosphine chalcogenides: polarization/deprotonation/oxidation effects of electron-deficient acetylenes

Terminal acylacetylenes act as trimodal auxiliaries in SHN cross-coupling of pyridines with phosphine chalcogenides. The reaction proceeds via phosphorylation of the pyridine 2 position followed by 2 → 4-migration of phosphoryl moieties.

Architecture and synthesis of P,N-heterocyclic phosphine ligands

Diverse P,N-phosphine ligands reported to date have performed exceptionally well as auxiliary ligands in organometallic catalysis. Phosphines bearing 2-pyridyl moieties prominently feature in literature as compared to phosphines with five-membered N-heterocycles. This discussion seeks to paint a broad picture and consolidate different synthetic protocols and techniques for N-heterocyclic phosphine motifs. The introduction provides an account of P,N-phosphine ligands, and their structural and coordination benefits from combining heteroatoms with different basicity in one ligand. The body discusses the synthetic protocols which focus on P–C, P–N-bond formation, substrate and nucleophile types and different N-heterocycle construction strategies. Selected references are given in relation to the applications of the ligands.

Iminophosphanes: Synthesis, Rhodium Complexes, and Ruthenium(II)-Catalyzed Hydration of Nitriles

Highly stable iminophosphanes, obtained from alkylating nitriles and reaction of the resulting nitrilium ions with secondary phosphanes, were explored as tunable P-monodentate and 1,3-P,N bidentate ligands in rhodium complexes. X-ray crystal structures are reported for both κ¹ and κ² complexes with the counterion in one of them being an unusual anionic coordination polymer of silver triflate. The iminophosphane-based ruthenium(II)-catalyzed hydration of benzonitrile in 1,2-dimethoxyethane (180 °C, 3 h) and water (100 °C, 24 h) and under solvent free conditions (180 °C, 3 h) results in all cases in the selective formation of benzamide with yields of up to 96%, thereby outperforming by far the reactions in which the common 2-pyridyldiphenylphosphane is used as the 1,3-P,N ligand.

Chromium complexes bearing amidinato-phosphino ligand: synthesis, characterization, and catalytic properties of ethylene tri-/tetramerization and polymerization

An amidinato-phosphino ligand ArN[double bond, length as m-dash]C(R)NH(o-Ph₂PC₆H₄) (Ar = 2,4,6-Me₃C₆H₂, R = Ph (1); Ar = 2,6-iPr₂C₆H₃, R = Ph (2); Ar = 2,6-iPr₂C₆H₃, R = tBu (3)) was prepared. The ligand reacted with CrCl₃(THF)₃ to yield the N,P-chelation complex [ArNHC(R)[double bond, length as m-dash]N(o-Ph₂PC₆H₄)]CrCl₃(THF) (4-6), and the ligand's lithium salt ArN[double bond, length as m-dash]C(R)N(o-Ph₂PC₆H₄)Li reacted with the respective CrCl₃(THF)₃ and CrCl₂(THF)₂ to give the N,N,P-chelation complexes [ArN[double bond, length as m-dash]C(R)N(o-Ph₂PC₆H₄)]CrCl₂(THF) (7-8) and {[ArN[double bond, length as m-dash]C(R)N(o-Ph₂PC₆H₄)]Cr(μ-Cl)}₂ (9-11). Complexes 1-11 were characterized by IR, NMR (for 1-3), EPR (for 4-11) spectroscopy and CHN elemental analysis, of which 3, 5, 8, and 11 were further studied by X-ray crystallography. Upon activation with an organoaluminum cocatalyst, complexes 4-6 were all catalytically active in ethylene tri-/tetramerization along with ethylene polymerization, and complexes 7-11 functioned as well but in ethylene polymerization. The correlation between the structure and the catalytic properties of the catalyst system is discussed.

Ethylene oligomerization promoted by chromium complexes bearing pyrrolide–imine–amine/ether tridentate ligands

Chromium complexes bearing pyrrolide–imino-amine/ether tridentate ligands have been synthesized and their catalytic behavior in ethylene oligomerization has been investigated. Drastic changes in selectivity have been observed upon slight variation of the MAO-to-Cr ratio.