Synthesis and Reactivities of Cp*Ir Amide and Hydride Complexes Bearing C−N Chelate Ligands

Enantioconvergent transformations of secondary alcohols through borrowing hydrogen catalysis

Direct substitution of readily available alcohols is recognized as a key research area in green chemical synthesis. Starting from simple racemic secondary alcohols, the achievement of catalytic enantioconvergent transformations of the substrates will be highly desirable for efficient access to valuable enantiopure compounds. To accomplish such attractive yet challenging transformations, the strategy of the enantioconvergent borrowing hydrogen methodology has proven to be uniquely effective and versatile. This review aims to provide an overview of the impressive progress made on this topic of research that has only thrived in the past decade. In particular, the conversion of racemic secondary alcohols to enantioenriched chiral amines, N-heterocycles, higher-order alcohols and ketones will be discussed in detail.

Ir-Catalyzed Synthesis of Functionalized Pyrrolidines and Piperidines Using the Borrowing Hydrogen Methodology

The Ir(III)-catalyzed synthesis of 3-pyrrolidinols and 4-piperidinols combining 1,2,4-butanetriol or 1,3,5-pentanetriol with primary amines was carried out. This borrowing hydrogen methodology was further extended to the sequential diamination of triols leading to amino-pyrrolidines and amino-piperidines.

Iridium-Catalyzed Enantioconvergent Borrowing Hydrogen Annulation of Racemic 1,4-Diols with Amines

We present an enantioconvergent access to chiral N-heterocycles directly from simple racemic diols and primary amines, through a highly economical borrowing hydrogen annulation. The identification of a chiral amine-derived iridacycle catalyst was the key for achieving high efficiency and enantioselectivity in the one-step construction of two C-N bonds. This catalytic method enabled a rapid access to a wide range of diversely substituted enantioenriched pyrrolidines including key precursors to valuable drugs such as aticaprant and MSC 2530818.

Regioselective Transfer Hydrogenative Defluorination of Polyfluoroarenes Catalyzed by Bifunctional Azairidacycle

The catalytic hydrodefluorination (HDF) with a bifunctional azairidacycle using HCOOK was examined for cyano- and chloro-substituted fluoroarenes, including penta- and tetrafluorobenzonitriles, tetrafluoroterephthalonitrile, tetrafluorophthalonitrile, 3-chloro-2,4,5,6-tetrafluoropyridine, and 4-cyano-2,3,5,6-tetrafluoropyridine. The reaction was performed in the presence of a controlled amount of HCOOK with a substrate/catalyst ratio (S/C) of 100 in a 1:1 mixture of 1,2-dimethoxyethane (DME) and H2O at an ambient temperature of 30 °C to obtain partially fluorinated compounds with satisfactory regioselectivities. The C–F bond cleavage proceeded favorably at the para position of substituents other than fluorine, which is in consonance with the nucleophilic aromatic substitution mechanism. In the HDF of tetrafluoroterephthalonitrile and 4-cyano-2,3,5,6-tetrafluoropyridine, which do not contain a fluorine atom at the para position of the cyano group, the double defluorination occurred solely at the 2- and 5-positions, as confirmed by X-ray crystallography. The HDF of 3-chloro-2,4,5,6-tetrafluoropyridine gave preference to the C–F bond cleavage over the C–Cl bond cleavage, unlike the dehalogenation pathway via electron-transfer radical anion fragmentation. In addition, new azairidacycles with an electron-donating methoxy substituent on the C–N chelating ligand were synthesized and served as a catalyst precursor (0.2 mol%) for the transfer hydrogenative defluorination of pentafluoropyridine, leading to 2,3,5,6-tetrafluoropyridine with up to a turnover number (TON) of 418.

Ruthenacycles and Iridacycles as Transfer Hydrogenation Catalysts

In this review, we describe the synthesis and use in hydrogen transfer reactions of ruthenacycles and iridacycles. The review limits itself to metallacycles where a ligand is bound in bidentate fashion to either ruthenium or iridium via a carbon–metal sigma bond, as well as a dative bond from a heteroatom or an N-heterocyclic carbene. Pincer complexes fall outside the scope. Described are applications in (asymmetric) transfer hydrogenation of aldehydes, ketones, and imines, as well as reductive aminations. Oxidation reactions, i.e., classical Oppenauer oxidation, which is the reverse of transfer hydrogenation, as well as dehydrogenations and oxidations with oxygen, are described. Racemizations of alcohols and secondary amines are also catalyzed by ruthenacycles and iridacycles.

Recent Development in the Synthesis and Catalytic Application of Iridacycles

Cyclometallated complexes are well-known and have found many applications. This article provides a short review on the progress made in the synthesis and application to catalysis of cyclometallated half-sandwich Cp*Ir(III) complexes (Cp*: pentamethylcyclopentadienyl) since 2017. Covered in the review are iridacycles featuring conventional C,N chelates and less common metallocene and carbene-derived C,N and C,C ligands. This is followed by an overview of the studies of their applications in catalysis ranging from asymmetric hydrogenation, transfer hydrogenation, hydrosilylation to dehydrogenation.

Cyclometalated Half-Sandwich Iridium(III) Complexes: Synthesis, Structure, and Diverse Catalytic Activity in Imine Synthesis Using Air as the Oxidant

Four air-stable cyclometalated half-sandwich iridium complexes 1-4 with C,N-donor Schiff base ligands were prepared through C-H activation in moderate-to-good yields. These complexes have been well characterized, and their exact structure was elaborated on by single-crystal X-ray analysis. The iridium(III) complexes 1-4 showed good catalytic activity in the imine synthesis under open-flask conditions (air as the oxidant) from primary amine oxidative homocoupling, secondary amine dehydrogenation, and the cross-coupling reaction of amine and alcohol. Substituents bonded on the ligands of the iridium complexes displayed little effect on the catalytic efficiency. The stability and good catalytic efficiency of the iridium catalysts, mild reaction conditions, and substrate universality showed their potential application in industrial production.

Chiral cyclometalated iridium complexes for asymmetric reduction reactions

A series of chiral cyclometalated iridium complexes have been synthesised by cyclometalating chiral 2-aryl-oxazoline and imidazoline ligands with [Cp*IrCl2]2. These iridacycles were studied for asymmetric transfer hydrogenation reactions with formic acid as the hydrogen source and were found to display various activities and enantioselectivities, with the most effective ones affording up to 63% ee in the asymmetric reductive amination of ketones and 77% ee in the reduction of pyridinium ions.

New Bifunctional Bis(azairidacycle) with Axial Chirality via Double Cyclometalation of 2,2'-Bis(aminomethyl)-1,1'-binaphthyl

As a candidate for bifunctional asymmetric catalysts containing a half-sandwich C–N chelating Ir(III) framework (azairidacycle), a dinuclear Ir complex with an axially chiral linkage is newly designed. An expedient synthesis of chiral 2,2′-bis(aminomethyl)-1,1′-binaphthyl (1) from 1,1-bi-2-naphthol (BINOL) was accomplished by a three-step process involving nickel-catalyzed cyanation and subsequent reduction with Raney-Ni and KBH₄. The reaction of (S)-1 with an equimolar amount of [IrCl₂Cp*]₂ (Cp* = η⁵–C₅(CH₃)₅) in the presence of sodium acetate in acetonitrile at 80 °C gave a diastereomeric mixture of new dinuclear dichloridodiiridium complexes (5) through the double C–H bond cleavage, as confirmed by ¹H NMR spectroscopy. A loss of the central chirality on the Ir centers of 5 was demonstrated by treatment with KOC(CH₃)₃ to generate the corresponding 16e amidoiridium complex 6. The following hydrogen transfer from 2-propanol to 6 provided diastereomers of hydrido(amine)iridium retaining the bis(azairidacycle) architecture. The dinuclear chlorido(amine)iridium 5 can serve as a catalyst precursor for the asymmetric transfer hydrogenation of acetophenone with a substrate to a catalyst ratio of 200 in the presence of KOC(CH₃)₃ in 2-propanol, leading to (S)-1-phenylethanol with up to an enantiomeric excess (ee) of 67%.

Transfer hydrogenation of carbon dioxide via bicarbonate promoted by bifunctional C-N chelating Cp*Ir complexes

Metal-ligand cooperative Cp*Ir(iii) complexes derived from primary benzylic amines effectively promote transfer hydrogenation of atmospheric CO2 using 2-propanol at 80 °C. Isotope-labelling experiments strengthen that active Ir species can preferentially reduce bicarbonate congeners formed from CO2. The powerful transfer hydrogenation catalyst exhibits remarkable activity for the conversion of bicarbonates into formate salts with a turnover number up to 3200, even without H2 and CO2.

Iridium-catalyzed diastereoselective amination of alcohols with chiral tert-butanesulfinamide by the use of a borrowing hydrogen methodology

An iridium-catalyzed diastereoselective amination of alcohols with chiral tert-butanesulfinamide was developed under basic conditions, affording the optically active secondary sulfinamides in high yields and diastereoselectivities. The removal of the sulfinyl group from sulfonamides allowed a facile access to a wide range of α-chiral primary amines. This synthetic strategy was further applied in the synthesis of the marketed pharmaceuticals (S)-rivastigmine and NPS R-568.

Controllable assembly of rectangular macrocycles bearing different numbers of unsaturated sites based on half-sandwich iridium fragments

A series of hexanuclear rectangular macrocycles were designed and synthesized by utilizing multifunctional pyrazine-derived (pyrazine-2,3-diamine (H4L1)) and quinoxaline-derived ligands (2,3-dihydroxy-quinoxaline (H2L2)) featuring two monodentate sites and one pair of chelating sites. X-ray crystallography in combination with 1H NMR spectroscopy elucidated that both half-sandwich iridium diimine and dihydroxy moieties are located on either side of the rectangular macrocycles, making them centrosymmetric. Thereby, the prepared diimine-functionalised complexes were found to have unsaturated metal sites on account of their strongly bound Ir-N-C-C-N arrangement. However, all the iridium atoms in the rectangular macrocycles containing dihydroxy groups were found to adopt an 18-electron coordination configuration, indicating that the O,O'-bonded iridium centers had bound additional ligands, such as Cl-, MeOH, MeCN, etc. Notably, a rare rectangular macrocycle containing a single coordinatively unsaturated metal site was achieved when the ligands H2L12- and L22- were introduced simultaneously.

Synthesis, Structures, and Reactivity of Single and Double Cyclometalated Complexes Formed by Reactions of [Cp*MCl2]2 (M = Ir and Rh) with Dinaphthyl Phosphines

Reactions of two dinaphthyl phosphines with [Cp*IrCl₂]₂ have been carried out. In the case of di(α-naphthyl)phenylphosphine (1a), a simple P-coordinated neutral adduct 2a is obtained. However, tert-butyldi(α-naphthyl)phenylphosphine (1b) is cyclometalated to form [Cp*IrCl(P^C)] (3b). Complexes 2a and 3a undergo further cyclometalation to give the corresponding double cyclometalated complexes [Cp*Ir(C^P^C)] (4a,b) upon heating. In the presence of sodium acetate, reactions of 1a,b with [Cp*IrCl₂]₂ directly afford the final double cyclometalated complexes (4a,b). In the absence of acetate, [Cp*RhCl₂]₂ shows no reaction with 1a,b, whereas with acetate the reactions form the corresponding single cyclometalated complexes [Cp*RhCl(P^C)] (5a,b), which react with ^t BuOK to form the corresponding rhodium hydride complexes (6a,b). Treatment of 4a with CuCl₂ or I₂ leads to opening of two Ir-C σ bonds to yield the corresponding P-coordinated iridium dihalide (7 or 8) by means of an intramolecular C-C coupling reaction. A new chiral phosphine (11) is formed by the ligand-exchange reaction of 8 with PMe₃. Reactions of the single cycloiridated complex 3b with terminal aromatic alkynes result in the corresponding five- and six-membered doubly cycloiridated complex 12 and/or η²-alkene coordinated complexes 13-15; the latter discloses that the electronic effect of terminal alkynes affects the regioselectivity. While the single cyclorhodated complex 5b reacts with terminal aromatic alkynes to form the corresponding six-membered cyclometalated complexes 16a-c by vinylidene rearrangement/1,1-insertion. Plausible pathways for formation of insertion products 13-16 were proposed. Molecular structures of twelve new complexes were determined by X-ray diffraction.

Aromatic alkyne insertion into six-membered cyclometalated pyridine complexes of iridium: different insertion modes and structurally novel products

Reactions of 2-benzoylpyridine or 2-benzylpyridine with [Cp*MCl₂]₂ (M = Ir, Rh) have been carried out in the presence of NaOAc in refluxing methanol, which form the corresponding six-membered cyclometalated products (1–3) except for the reaction of 2-benzylpyridine with [Cp*RhCl₂]₂. Insertion reactions of two six-membered cyclometalated pyridine iridium complexes (1 and 2) with terminal or internal aromatic alkynes were studied. Terminal alkynes p-XC₆H₄C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CH (X = H, MeO, and F) with 1 give the corresponding five- and seven-membered doubly cycloiridated complexes 4a–c, internal alkynes p-XC₆H₄CCC₆H₄X-p (X = H, MeO, and Br) form the similar five- and seven-membered doubly cycloiridated complexes (5a,b) and/or di-insertion products (6a,c), whereas the acyl alkyne PhCCCOPh affords the novel spiro-metalated complex 7. For complex 2, internal alkynes p-XC₆H₄CCC₆H₄X-p (X = H, MeO, and Br) form similar five- and seven-membered doubly cycloiridated complexes (8a–c). However, in the case of PhCCCOPh, the reaction gives the novel four-membered cyclometalated complex 9. These results suggest that the products formed by alkyne insertion reactions of the six-membered cycloiridated pyridine complexes are very diverse. Plausible pathways for the formation of these novel insertion products were proposed. Molecular structures of seven cyclometalated complexes were determined by X-ray diffraction.

Insertion reactions of aromatic alkynes into the Ir–C bond of six-membered cycloiridated complexes formed various novel products via different insertion modes.

Enantioselective Synthesis of Tetrahydroquinolines by Borrowing Hydrogen Methodology: Cooperative Catalysis by an Achiral Iridacycle and a Chiral Phosphoric Acid

We report herein the highly enantioselective synthesis of 2-substituted tetrahydroquinolines through borrowing hydrogen, a process recognized for its environmentally benign and atom-economical nature. The use of an achiral iridacycle complex in combination with a chiral phosphoric acid as catalysts was the key to the development of this highly efficient and enantioselective transformation.

Iridacycles for hydrogenation and dehydrogenation reactions

Iridacycles are a group of cyclometalated metal complexes, which have recently been shown to be versatile catalysts for a range of reactions. This Feature Article provides an account of the work carried out by our groups. We start with an introduction to the variety of iridacycles and how they entered into catalysis. The following sections provide an overview of the discovery and applications in catalysis of the iridacycles originated from our labs, including transfer hydrogenation with formic acid, hydrogenation with H₂, dehydrogenation and borrowing-hydrogen reactions. Where possible, mechanistic insight is also presented. A notable advantage of these iridacycles is their ease of preparation, stability to air and water and high modularity. With only one coordination site available for substrate activation, the iridacycles differ from most homogeneous catalysts structure-wise.

Comparative Study of Bifunctional Mononuclear and Dinuclear Amidoiridium Complexes with Chiral C-N Chelating Ligands for the Asymmetric Transfer Hydrogenation of Ketones

A series of new bifunctional C-N chelating Ir complexes possessing a metal/NH group was synthesized by cyclometalation of optically active primary benzylic amines such as O-silylated (S)-2-amino-2-phenylethanols (1 a and 1 a'), (R)-5-amino-6,7,8,9-tetrahydro-5H-benzocycloheptene (1 b), and (R)-1-phenyl-2,2-dimethylpropylamine (1 c). Although treatment of KOtBu with the amine complexes originating from 1 a and 1 a' afforded amido-bridged dinuclear complexes (3 a and 3 a'), more sterically hindered complexes were solely transformed into the coordinatively unsaturated mononuclear amido complexes (3 b and 3 c), which can serve as real catalyst species in the asymmetric transfer hydrogenation. The structural difference in the C-N chelate framework markedly affected the catalytic performance. Among them, amido complex 3 c showed a pronounced ability to catalyze the transfer hydrogenation of acetophenone in 2-propanol, even at a low temperature of -30 °C. A hydridoiridium complex (4 c) was also identified in the reaction of 3 c in 2-propanol, which provides mechanistic insights into the enantiodiscriminating step in the hydrogen transfer to prochiral ketones.

Iridicycle-Catalysed Imine Reduction: An Experimental and Computational Study of the Mechanism

The mechanism of imine reduction by formic acid with a single-site iridicycle catalyst has been investigated by density functional theory (DFT), NMR spectroscopy, and kinetic measurements. The NMR and kinetic studies suggest that the transfer hydrogenation is turnover-limited by the hydride formation step. The calculations reveal that, amongst a number of possibilities, hydride formation from the iridicycle and formate probably proceeds by an ion-pair mechanism, whereas the hydride transfer to the imino bond occurs in an outer-sphere manner. In the gas phase, in the most favourable pathway, the activation energies in the hydride formation and transfer steps are 26-28 and 7-8 kcal mol(-1) , respectively. Introducing one explicit methanol molecule into the modelling alters the energy barrier significantly, reducing the energies to around 18 and 2 kcal mol(-1) for the two steps, respectively. The DFT investigation further shows that methanol participates in the transition state of the turnover-limiting hydride formation step by hydrogen-bonding to the formate anion and thereby stabilising the ion pair.

Nitrogen enriched mesoporous organic polymer anchored copper(ii) material: an efficient and reusable catalyst for the synthesis of esters and amides from aromatic systems

New mesoporous polymer anchored copper acetate (Cu-mPMF) has been synthesized and well characterized. The catalytic performance of this complex has been tested for the synthesis of esters and amides.

Efficient hydrosilylation of imines using catalysts based on iridium(iii) metallacycles

Ir(iii) metallacycles were applied as catalysts for the hydrosilylation of ketimines and aldimines by using sodium tetrakis[(3,5-trifluoromethyl)phenyl]borate, NaBArF₂₄, as an additive. By using a slight excess of the organosilane reagent, the reactions proceeded rapidly and efficiently, at low catalyst loadings and at room temperature.

Cyclometalated [Cp*M(C^X)] (M = Ir, Rh; X = N, C, O, P) complexes

Isolated and well-defined cyclometalated iridium/rhodium complexes that contain a Cp*M–C (M = Ir, Rh) bond stabilised by the intramolecular coordination of neutral donor atoms (N, C, O or P), together with their applications, were summarized.