Solvent-Enhanced Coupling of Sterically Hindered Reagents and Aryl Chlorides using Functionalized Ionic Liquids

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Unlocking the Potential of Deep Eutectic Solvents for C-H Activation and Cross-Coupling Reactions: A Review

Green chemistry principles have underpinned the development of deep eutectic solvents (DESs). In this brief overview, we discuss the potential of DESs as a greener alternative to volatile organic solvents for cross-coupling and C-H activation reactions in organic chemistry. DESs offer numerous benefits, such as easy preparation, low toxicity, high biodegradability, and the potential to replace volatile organic compounds. The ability of DESs to recover the catalyst-solvent system enhances their sustainability. This review highlights recent advances and challenges in utilizing DESs as a reaction media, as well as the impact of physicochemical properties on the reaction process. Several types of reactions are studied to highlight their effectiveness at promoting C-C bond formation. Aside from demonstrating the success of DESs in this context, this review also discusses the limitations and future prospects of DESs in organic chemistry.

Solvent effects on the kinetics of 4-nitrophenol reduction by NaBH4 in the presence of Ag and Au nanoparticles

The reduction of 4-nitrophenol (4-NiP) to 4-aminophenol (4-AP) with an excess of sodium borohydride is commonly used as a model reaction to assess the catalytic activity of metallic nanoparticles. This reaction is considered both a potentially important step in industrial water treatment and an attractive, commercially relevant synthetic pathway. Surprisingly, an important factor, the role of the reaction medium on the reduction performance, has so far been overlooked. Here, we report a pronounced effect of the solvent on the reaction kinetics in the presence of silver and gold nanoparticles. We demonstrate that the addition of methanol, ethanol, or isopropanol to the reaction mixture leads to a dramatic decrease in the reaction rate. For typical concentrations of reactants, the reduction is completely suppressed in the presence of 50 vol% alcohols. 4-NiP reduction rate in aqueous alcohol mixtures can, however, be improved noticeably by increasing the borohydride concentration or the reaction temperature. The analysis of various factors responsible for solvent effects reveals that the decrease in the reduction rate in the presence of alcohols is related, amongst others, to a substantially higher oxygen solubility in alcohols compared to water. The results of this work show that the effects of solvent properties on reaction kinetics must be considered for unambiguous comparison and optimization of the catalytic performance of metallic nanoparticles in the liquid phase 4-NiP reduction.

The presence of methanol, ethanol, or isopropanol in the reaction mixture substantially affects the kinetics of 4-nitrophenol reduction in aqueous medium.

Solvent Effects on the Selectivity of Palladium-Catalyzed Suzuki-Miyaura Couplings

The use of polar solvents MeCN or dimethylformamide (DMF) was previously shown to induce a selectivity switch in the Pd/P ^t Bu₃-catalyzed Suzuki-Miyaura coupling of chloroaryl triflates. This phenomenon was attributed to the ability of polar solvents to stabilize anionic transition states for oxidative addition. However, we demonstrate that selectivity in this reaction does not trend with solvent dielectic constant. Unlike MeCN and DMF, water, alcohols, and several polar aprotic solvents such as MeNO₂, acetone, and propylene carbonate provide the same selectivity as nonpolar solvents. These results indicate that the role of solvent on the selectivity of Suzuki-Miyaura couplings may be more complex than previously envisioned. Furthermore, this observation has the potential for synthetic value as it greatly broadens the scope of solvents that can be used for chloride-selective cross coupling of chloroaryl triflates.

Ligand-Free Bioinspired Suzuki-Miyaura Coupling Reactions using Aryltrifluoroborates as Effective Partners in Deep Eutectic Solvents

Pd-catalyzed Suzuki-Miyaura cross-coupling between (hetero)aryl halides (Cl, Br, I) and versatile, moisture-stable mono- and bifunctional potassium aryltrifluoroborates proceeded efficiently and chemoselectively in air and under generally mild conditions; a catalyst loading as low as 1 mol % combined with Na₂ CO₃ as a base in choline chloride/glycerol (1:2) deep eutectic solvent (DES) was used as a sustainable and environmentally responsible medium. The catalyst, base, and DES were easily and successfully recycled up to six times with an E-factor as low as 8.74. Valuable biaryls and terphenyl derivatives were furnished in yields of up to 98 %; over 50 reactions were compared and discussed. The methodology was applied for the synthesis of the nonsteroidal anti-inflammatory drugs Felbinac and Diflunisal.

Highly efficient aqueous phase reduction of nitroarenes catalyzed by phosphine-decorated polymer immobilized ionic liquid stabilized PdNPs

Phosphino-decorated polymer immobilised ionic liquid-stabilised PdNPs are highly efficient catalysts for the aqueous phase hydrogenation and transfer hydrogenation of aromatic nitro compounds in batch and continuous flow.

Solvent effects in catalysis: rational improvements of catalysts via manipulation of solvent interactions

The interactions of solvents with catalysts, substrates and products all influence the rate and selectivity of reactions and should be considered to ensure a reaction is run under optimum conditions.

Dual functionalized task specific ionic liquid promoted in situ generation of palladium nanoparticles in water: synergic catalytic system for Suzuki–Miyaura cross coupling

A new task specific ionic liquid with hydroxyl and prolinate functionalities acts as a reducing agent and serves as a ligand and stabilizer for in situ formed palladium nanoparticles. This system displays high catalytic activity for Suzuki–Miyaura cross-coupling in water.

Rapid, facile synthesis of conjugated polymer zwitterions in ionic liquids

Ionic liquids (ILs) were utilized for the rapid air-stable Suzuki polymerization of polar zwitterionic thiophene monomers, precluding the need for volatile organic solvents, phosphine ligands and phase transfer catalysts typically used in conjugated polymer synthesis.

How strong is hydrogen bonding in ionic liquids? Combined X-ray crystallographic, infrared/Raman spectroscopic, and density functional theory study

Hydrogen bonding in ionic liquids based on the 1-(2'-hydroxylethyl)-3-methylimidazolium cation ([C₂OHmim](+)) and various anions ([A](-)) of differing H-bond acceptor strength, viz. hexafluorophosphate [PF6](-), tetrafluoroborate [BF₄](-), bis(trifluoromethanesulfonimide) [Tf₂N](-), trifluoromethylsulfonate [OTf](-), and trifluoroacetate [TFA](-), was studied by a range of spectroscopic and computational techniques and, in the case of [C₂OHmim][PF6], by single crystal X-ray diffraction. The first quantitative estimates of the energy (E(HB)) and the enthalpy (-ΔH(HB)) of H-bonds in bulk ILs were obtained from a theoretical analysis of the solid-state electron-density map of crystalline [C₂OHmim][PF6] and an analysis of the IR spectra in crystal and liquid samples. E(HB) for OH···[PF6](-) H-bonds amounts to ~3.4-3.8 kcal·mol(-1), whereas weaker H-bonds (2.8-3.1 kcal·mol(-1)) are formed between aromatic C2H group of imidazolium ring and the [PF6](-) anion. The enthalpy of the OH···[A](-) H-bonds follows the order: [PF6] (2.4 kcal·mol(-1)) < [BF₄] (3.3 kcal·mol(-1)) < [Tf₂N] (3.4 kcal·mol(-1)) < [OTf] (4.7 kcal·mol(-1)l) < [TFA] (6.2 kcal·mol(-1)). The formation of aggregates of self-associated [C₂OHmim](+) cations is present in liquid [C₂OHmim][PF6], [C₂OHmim][BF₄], and [C₂OHmim][Tf₂N], with the energy of the OH···OH H-bonds amounting to ~6 kcal·mol(-1). Multiple secondary interactions in the bulk ILs influence their structure, vibrational spectra, and H-bond strength. In particular, these interactions can blue-shift the stretching frequencies of the CH groups of the imidazolium ring in spite of red-shifting CH···[A](-) H-bonds. They also weaken the H-bonding in the IL relative to the isolated ion pairs, with these anticooperative effects amounting to ca. 50% of the E(HB) value.

Nanometallic chemistry: deciphering nanoparticle catalysis from the perspective of organometallic chemistry and homogeneous catalysis

Nanoparticle (NP) catalysis is traditionally viewed as a sub-section of heterogeneous catalysis. However, certain properties of NP catalysts, especially NPs dispersed in solvents, indicate that there could be benefits from viewing them from the perspective of homogeneous catalysis. By applying the fundamental approaches and concepts routinely used in homogeneous catalysis to NP catalysts it should be possible to rationally design new nanocatalysts with superior properties to those currently in use.

Ionic iron(III) complexes of bis(phenol)-functionalized imidazolium cations: synthesis, structures and catalysis for aryl Grignard cross-coupling of alkyl halides

A series of bis(phenol)-functionalized imidazolium salts, 1,3-bis(4,6-di-R(1)-2-hydroxybenzyl)-2-R(2)-4,5-di-R(3)-imidazolium chlorides H(3)L(n)Cl (R(1) = (t)Bu, R(2) = R(3) = H, H(3)L(1)Cl, 1; R(1) = CH(3), R(2) = R(3) = H, H(3)L(2)Cl, 2; R(1) = (t)Bu, R(2) = H, R(3) = Cl, H(3)L(3)Cl, 3; R(1) = (t)Bu, R(2) = CH(3), R(3) = H, H(3)L(4)Cl, 4), were used to produce a novel series of ionic iron(III) complexes [H(3)L(n)][FeX(4)] (n = 1, X = Cl, 5; n = 2, X = Cl, 6; n = 3, X = Cl, 7; n = 4, X = Cl, 8; n = 1, X = Br, 9; n = 3, X = Br, 10). All of the complexes were characterized by Raman spectroscopy and electrospray ionization mass spectrometry. Elemental analysis and X-ray crystallography were also used. All of the complexes were non-hygroscopic and air-stable, with five of them existing as solids (5, 7-10) and one as an oil (6) at room temperature. A preliminary catalytic study on the cross-coupling reactions of aryl Grignard reagents with primary and secondary alkyl halides bearing β-hydrogens, revealed that all of the ionic iron(III) complexes exhibited good to excellent catalytic activity. Complexes 5, 6 and 8 exhibited optimal activity, whereas 7, 9 and 10 showed only moderate activity. Furthermore, by simply decanting the cross-coupling product in the ether layer, complexes 5 and 6 could be reused in at least seven successive runs without significant loss in catalytic activity.

Carbon-carbon cross coupling reactions in ionic liquids catalysed by palladium metal nanoparticles

A brief summary of selected pioneering and mechanistic contributions in the field of carbon-carbon cross-coupling reactions with palladium nanoparticles (Pd-NPs) in ionic liquids (ILs) is presented. Five exemplary model systems using the Pd-NPs/ILs approach are presented: Heck, Suzuki, Stille, Sonogashira and Ullmann reactions which all have in common the use of ionic liquids as reaction media and the use of palladium nanoparticles as reservoir for the catalytically active palladium species.

Synthesis of symmetrical and unsymmetrical 3,3-di(indolyl)indolin-2-ones under controlled catalysis of ionic liquids

Three ionic liquids, [BMIM][BF₄] doped with 60 mol % of LiCl ([BMIM][BF₄]–LiCl), N,N,N,N-tetramethylguanidinium trifluoroacetate (TMGT), and N,N,N,N-tetramethylguanidinium triflate (TMGT_f) were found useful as catalyst solvents for controlled 3-indolylation of isatins. Our investigation revealed that the reaction between isatin and indoles in [BMIM][BF₄]–LiCl or TMGT_f media stops at the step of addition of the two components providing 3-indolyl-3-hydroxyindolin-2-ones while the ionic liquid TMGT runs the reaction further through accompanying Friedel–Crafts substitution to afford symmetrical 3,3-di(indol-3-yl)indolin-2-ones. To take advantage of the difference between the effects of these ionic liquids on the reaction progress, we planned a two-step protocol for the efficient synthesis of unsymmetrical 3,3-di(indol-3-yl)indolin-2-ones.