Surface Organometallic Chemistry of Hf(CH2tBu)4 on Silica and Silica−Alumina: Reaction of the Resulting Grafted Hafnium Neopentyl with Dihydrogen

Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium

Mesoporous silicon nitride (Si3N4) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal-ligand orbital overlap. Here, tetrabenzyl zirconium (ZrBn4) was chemisorbed on Si3N4, and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C-H bond activation along the Zr-N bond, this material was found to be a highly active (1.53 molpropene molZr-1 h-1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Structural characterization of interfaces in silica core-alumina shell microspheres by solid-state NMR spectroscopy

Atomic-scale description of surfaces and interfaces in core-shell aluminosilicate materials is not fully elucidated, partially due to their amorphous character and complex mechanisms that govern their properties. In this paper, new insights into nanostructured core-shell aluminosilicates have been demonstrated, by using different solid-state NMR methods, i.e ²⁹Si, ²⁹Si cross-polarization (CP), ²⁷Al, ²⁷Al triple-quantum (3Q), and ¹H-²⁷Al heteronuclear correlation (HETCOR) MAS NMR. For this purpose, nanostructured silica core-alumina shell microspheres, undoped and doped with gadolinium ions respectively, obtained by a chemical synthesis based on the Stöber method for the silica core and electrostatic attraction for developing the alumina shell were studied. As a result, a new alumino-silicate layer formation was proved at the interface between silica core, where aluminum diffuses, on small scale, in the silica network, and alumina shell, where silicon ions migrate, on a larger scale, in the alumina network, leading to a stable core-shell structure. Moreover, this process is accompanied by significant local structural changes in the transition zone, particularly at the aluminum neighborhood, which is quite well understood now, with the power of solid-state NMR spectroscopy.

Bidentate Disilicate Framework for Bis-Grafted Surface Species

Recent advances in surface organometallic chemistry have enabled the detailed characterization of the surface species in single-site heterogeneous catalysts. However, the selective formation of bis-grafted surface species remains challenging because of the heterogeneity of the supporting surface. Herein, we introduce a metal complex bearing bidentate disilicate ligands, -OSi(O^t Bu)₂ OSi(O^t Bu)₂ O-, as a molecular precursor, which has a silicate framework adjacent to the metal (Pt) center. The grafting of the precursors on silica supports (MCM-41 and CARiACT Q10) proceeded through a substitution reaction on the silicon atoms of the disilicate ligand, which was verified by the detection of isobutene and ^t BuOH as the elimination products, to selectively yield bis-grafted surface species. The chemical structure of the surface species was characterized by solid-state NMR, and the chemical shift values of the ancillary ligands and ¹⁹⁵ Pt nuclei suggested that the bidentate coordination sphere was maintained following grafting.

Molecular and supported Ti(iii)-alkyls: efficient ethylene polymerization driven by the π-character of metal-carbon bonds and back donation from a singly occupied molecular orbital

While Ti(iii) alkyl species are the proposed active sites in Ziegler–Natta ethylene polymerization catalysts, the corresponding well-defined homogeneous catalysts are not known. We report that well-defined neutral β-diiminato Ti(iii) alkyl species, namely [Ti(nacnac)(CH₂^tBu)₂] and its alumina-grafted derivative [(Al_sO)Ti(nacnac)(CH₂^tBu)], are active towards ethylene polymerization at moderate pressures and temperatures and possess an electron configuration well-adapted to insertion of ethylene. Advanced EPR spectroscopy showed that ethylene insertion into a Ti(iii)–C bond takes place during polymerization from Ti(nacnac)(CH₂^tBu)₂. A combination of pulsed EPR spectroscopy and DFT calculations, based on a crystal structure of [Ti(nacnac)(CH₂^tBu)₂], enabled us to reveal details about the structure and electronic configurations of both molecular and surface-grafted species. For both compounds, the α-agostic C–H interaction, which involves the singly occupied molecular orbital, indicates a π character of the metal–carbon bond; this π character is enhanced upon ethylene coordination, leading to a nearly barrier-less C₂H₄ insertion into Ti(iii)–C bonds after this first step. During coordination, back donation from the SOMO to the π*(C₂H₄) occurs, leading to stabilization of π-ethylene complexes and to a significant lowering of the overall energy of the C₂H₄ insertion transition state. In d¹ alkyl complexes, ethylene insertion follows an original “augmented” Cossee–Arlman mechanism that involves the delocalization of unpaired electrons between the SOMO, π*(C₂H₄) and σ*(Ti–C) in the transition state, which further favors ethylene insertion. All these factors facilitate ethylene polymerization on Ti(iii) neutral alkyl species and make d¹ alkyl complexes potentially more effective polymerization catalysts than their d⁰ analogues.

Ti(iii) alkyl species polymerize ethylene via an original mechanism, which involves back donation to the π*(C₂H₄) and a delocalization of the unpaired electron in the transition state of C₂H₄ insertion into the partially alkylidenic Ti(iii)–C bond.

Preparation of monopodal and bipodal aluminum surface species by selective protonolysis of highly reactive [AlH3(NMe2Et)] on silica

The reaction of [AlH₃(NMe₂Et)] with silica treated at 200 °C leads to a well-defined bipodal aluminum hydride while with silica treated at 700 °C a mixture of mono- and bi-podal aluminum hydrides is obtained.

Catalysis by Design: Well-Defined Single-Site Heterogeneous Catalysts

Heterogeneous catalysis, a field important industrially and scientifically, is increasingly seeking and refining strategies to render itself more predictable. The main issue is due to the nature and the population of catalytically active sites. Their number is generally low to very low, their "acid strengths" or " redox properties" are not homogeneous, and the material may display related yet inactive sites on the same material. In many heterogeneous catalysts, the discovery of a structure-activity reationship is at best challenging. One possible solution is to generate single-site catalysts in which most, if not all, of the sites are structurally identical. Within this context and using the right tools, the catalyst structure can be designed and well-defined, to reach a molecular understanding. It is then feasible to understand the structure-activity relationship and to develop predictable heterogeneous catalysis. Single-site well-defined heterogeneous catalysts can be prepared using concepts and tools of surface organometallic chemistry (SOMC). This approach operates by reacting organometallic compounds with surfaces of highly divided oxides (or of metal nanoparticles). This strategy has a solid track record to reveal structure-activity relationship to the extent that it is becoming now quite predictable. Almost all elements of the periodical table have been grafted on surfaces of oxides (from simple oxides such as silica or alumina to more sophisticated materials regarding composition or porosity). Considering catalytic hydrocarbon transformations, heterogeneous catalysis outcome may now be predicted based on existing mechanistic proposals and the rules of molecular chemistry (organometallic, organic) associated with some concepts of surface sciences. A thorough characterization of the grafted metal centers must be carried out using tools spanning from molecular organometallic or surface chemistry. By selection of the metal, its ligand set, and the support taken as a X, L ligands in the Green formalism, the catalyst can be designed and generated by grafting the organometallic precursor containing the functional group(s) suitable to target a given transformation (surface organometallic fragments (SOMF)). The choice of these SOMF is based on the elementary steps known in molecular chemistry applied to the desired reaction. The coordination sphere necessary for any catalytic reaction involving paraffins, olefins, and alkynes also can thus be predicted. Only their most complete understanding can allow development of catalytic reactions with the highest possible selectivity, activity, and lifetime. This Account will examine the results of SOMC for hydrocarbon transformations on oxide surfaces bearing metals of group 4-6. The silica-supported catalysts are exhibiting remarkable performances for Ziegler-Natta polymerization and depolymerization, low temperature hydrogenolysis of alkanes and waxes, metathesis of alkanes and cycloalkanes, olefins metathesis, and related reactions. In the case of reactions involving molecules that do not contain carbon (water-gas shift, NH3 synthesis, etc.) this single site approach is also valid but will be considered in a later review.

Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?

Reaction of triisobutylaluminum with SBA15₇₀₀ at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges.

Reaction of triisobutylaluminum with SBA15₇₀₀ at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> SiO)₂Al–CH₂CH(CH₃)₂] 1a, silicon isobutyl [Si–CH₂CH(CH₃)₂] 1b and a silicon hydride [Si–H] 1c. Their structural identity was characterized by FT-IR and advanced solid-state NMR spectroscopies (¹H, ¹³C, ²⁹Si, ²⁷Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [SiO–Al–[CH₂CH(CH₃)₂]₂], with evolution of isobutane. This intermediate undergoes two parallel routes: transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, Si–O–Si but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O–Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al–H bond and a O–Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10^–5 mbar) generates Al–H through a β-H elimination of isobutyl fragment. These supported well-defined Al–H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and ²⁷Al–¹H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.